-
Multi-UAV Enabled Integrated Sensing and Wireless Powered Communication: A Robust Multi-Objective Approach
Authors:
Omid Rezaei,
Mohammad Mahdi Naghsh,
Seyed Mohammad Karbasi,
Mohammad Mahdi Nayebi
Abstract:
In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where multiple unmanned aerial vehicle (UAV)-based radars serve multiple clusters of energy-limited communication users in addition to their sensing functionality. In this architecture, the radars sense the environment in phase 1 (namely sensing phase) and meanwhile, the communicatio…
▽ More
In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where multiple unmanned aerial vehicle (UAV)-based radars serve multiple clusters of energy-limited communication users in addition to their sensing functionality. In this architecture, the radars sense the environment in phase 1 (namely sensing phase) and meanwhile, the communications users (nodes) harvest and store the energy from the radar transmit signals. The stored energy is then used for information transmission from the nodes to UAVs in phase 2, i.e., uplink phase. Performance of the radar systems depends on the transmit signals as well as the receive filters; the energy of the transmit signals also affects the communication network because it serves as the source of uplink powers. Therefore, we cast a multi-objective design problem addressing performance of both radar and communication systems via optimizing UAV trajectories, radar transmit waveforms, radar receive filters, time scheduling and uplink powers. The design problem is further formulated as a robust non-convex optimization problem taking into account the the user location uncertainty. Hence, we devise a method based on alternating optimization followed by concepts of fractional programming, S-procedure, and tricky majorization-minimization (MM) technique to tackle it. Numerical examples illustrate the effectiveness of the proposed method for different scenarios.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
A Learning-Inspired Strategy to Design Binary Sequences with Good Correlation Properties: SISO and MIMO Radar Systems
Authors:
Omid Rezaei,
Mahdi Ahmadi,
Mohammad Mahdi Naghsh,
Augusto Aubry,
Mohammad Mahdi Nayebi,
Antonio De Maio
Abstract:
In this paper, the design of binary sequences exhibiting low values of aperiodic/periodic correlation functions, in terms of Integrated Sidelobe Level (ISL), is pursued via a learning-inspired method. Specifcally, the synthesis of either a single or a burst of codes is addressed, with reference to both Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) radar systems. Two o…
▽ More
In this paper, the design of binary sequences exhibiting low values of aperiodic/periodic correlation functions, in terms of Integrated Sidelobe Level (ISL), is pursued via a learning-inspired method. Specifcally, the synthesis of either a single or a burst of codes is addressed, with reference to both Single-Input Single-Output (SISO) and Multiple-Input Multiple-Output (MIMO) radar systems. Two optimization machines, referred to as two-layer and single-layer Binary Sequence Correlation Network (BiSCorN), able to learn actions to design binary sequences with small ISL/Complementary ISL (CISL) for SISO and MIMO systems are proposed. These two networks differ in terms of the capability to synthesize Low-Correlation-Zone (LCZ) sequences and computational cost. Numerical experiments show that proposed techniques can outperform state-of-the-art algorithms for the design of binary sequences and Complementary Sets of Sequences (CSS) in terms of ISL and, interestingly, of Peak Sidelobe Level (PSL).
△ Less
Submitted 15 May, 2023;
originally announced May 2023.
-
Design of a Multi-User Wireless Powered Communication System Employing Either Active IRS or AF Relay
Authors:
Omid Rezaei,
Maryam Masjedi,
Ali Kanaani,
Mohammad Mahdi Naghsh,
Saeed Gazor,
Mohammad Mahdi Nayebi
Abstract:
In this paper, we optimize a Wireless Powered Communication (WPC) system including multiple pair of users, where transmitters employ single-antenna to transmit their information and power to their receivers with the help of one multiple-antennas Amplify-and-Forward (AF) relay or an active Intelligent Reflecting Surface (IRS). We propose a joint Time Switching (TS) scheme in which transmitters, rec…
▽ More
In this paper, we optimize a Wireless Powered Communication (WPC) system including multiple pair of users, where transmitters employ single-antenna to transmit their information and power to their receivers with the help of one multiple-antennas Amplify-and-Forward (AF) relay or an active Intelligent Reflecting Surface (IRS). We propose a joint Time Switching (TS) scheme in which transmitters, receivers, and the relay/IRS are either in their energy or information transmission/reception modes. The transmitted multi-carrier unmodulated and modulated waveforms are used for Energy Harvesting (EH) and Information Decoding (ID) modes, respectively. In order to design an optimal fair system, we maximize the minimum rate of all pairs for both relay and IRS systems through a unified framework. This framework allows us to simultaneously design energy waveforms, find optimal relay/IRS amplification/reflection matrices, allocate powers for information waveforms, and allocate time durations for various phases. In addition, we take into account the non-linearity of the EH circuits in our problem. This problem turns out to be non-convex. Thus, we propose an iterative algorithm by using the Minorization-Maximization (MM) technique, which quickly converges to the optimal solution. Numerical examples show that the proposed method improves the performance of the multi-pair WPC relay/IRS system under various setups.
△ Less
Submitted 31 December, 2022;
originally announced January 2023.
-
Max-Min Fairness Design for MIMO Interference Channels: a Minorization-Maximization Approach
Authors:
Mohammad Mahdi Naghsh,
Maryam Masjedi,
Arman Adibi,
Petre Stoica
Abstract:
We address the problem of linear precoder (beamformer) design in a multiple-input multiple-output interference channel (MIMO-IC). The aim is to design the transmit covariance matrices in order to achieve max-min utility fairness for all users. The corresponding optimization problem is non-convex and NP-hard in general. We devise an efficient algorithm based on the minorization-maximization (MM) te…
▽ More
We address the problem of linear precoder (beamformer) design in a multiple-input multiple-output interference channel (MIMO-IC). The aim is to design the transmit covariance matrices in order to achieve max-min utility fairness for all users. The corresponding optimization problem is non-convex and NP-hard in general. We devise an efficient algorithm based on the minorization-maximization (MM) technique to obtain quality solutions to this problem. The proposed method solves a second-order cone convex program (SOCP) at each iteration. We prove that the devised method converges to stationary points of the problem. We also extend our algorithm to the case where there are uncertainties in the noise covariance matrices or channel state information (CSI). Simulation results show the effectiveness of the proposed method compared with its main competitor.
△ Less
Submitted 2 August, 2019; v1 submitted 31 July, 2019;
originally announced August 2019.
-
Throughput Optimization for Wireless Powered Interference Channels
Authors:
Omid Rezaei,
Mohammad Mahdi Naghsh,
Zahra Rezaei,
Rui Zhang
Abstract:
This paper studies a general multi-user wireless powered interference channel (IFC) under the harvest-then-transmit protocol, where the communication in channel coherence time consists of two phases, namely wireless energy transfer (WET) and wireless information transfer (WIT). In the first phase, all energy transmitters (ETs) transmit energy signals to information transmitters (ITs) via collabora…
▽ More
This paper studies a general multi-user wireless powered interference channel (IFC) under the harvest-then-transmit protocol, where the communication in channel coherence time consists of two phases, namely wireless energy transfer (WET) and wireless information transfer (WIT). In the first phase, all energy transmitters (ETs) transmit energy signals to information transmitters (ITs) via collaborative waveform design, while in the second phase, each IT transmits an information signal to its intended ET using the harvested energy in the previous phase. The aim is to jointly design the WET-WIT time allocation, the (deterministic) transmit signal at the first phase, and the transmit power of ITs in the second phase to optimize the network throughput. The design problems are non-convex and hence difficult to solve globally. To deal with them, we propose efficient iterative algorithms based on alternating projections; then, the majorization-minimization technique is used to tackle the nonconvex sub-problems in each iteration. We also extend the devised design methodology by considering imperfect channel state information (CSI) and non-linearity in energy harvesting circuit. The proposed algorithms are locally convergent and can provide high-quality suboptimal solutions to the design problems. Simulation results show the effectiveness of the proposed algorithms under various setups.
△ Less
Submitted 26 February, 2019;
originally announced February 2019.