-
Data-Driven Extrusion Force Control Tuning for 3D Printing
Authors:
Xavier Guidetti,
Ankita Mukne,
Marvin Rueppel,
Yannick Nagel,
Efe C. Balta,
John Lygeros
Abstract:
The quality of 3D prints often varies due to different conditions inherent to each print, such as filament type, print speed, and nozzle size. Closed-loop process control methods improve the accuracy and repeatability of 3D prints. However, optimal tuning of controllers for given process parameters and design geometry is often a challenge with manually tuned controllers resulting in inconsistent a…
▽ More
The quality of 3D prints often varies due to different conditions inherent to each print, such as filament type, print speed, and nozzle size. Closed-loop process control methods improve the accuracy and repeatability of 3D prints. However, optimal tuning of controllers for given process parameters and design geometry is often a challenge with manually tuned controllers resulting in inconsistent and suboptimal results. This work employs Bayesian optimization to identify the optimal controller parameters. Additionally, we explore transfer learning in the context of 3D printing by leveraging prior information from past trials. By integrating optimized extrusion force control and transfer learning, we provide a novel framework for closed-loop 3D printing and propose an automated calibration routine that produces high-quality prints for a desired combination of print settings, material, and shape.
△ Less
Submitted 25 March, 2024;
originally announced March 2024.
-
Force Controlled Printing for Material Extrusion Additive Manufacturing
Authors:
Xavier Guidetti,
Nathan Mingard,
Raul Cruz-Oliver,
Yannick Nagel,
Marvin Rueppel,
Alisa Rupenyan,
Efe C. Balta,
John Lygeros
Abstract:
In material extrusion additive manufacturing, the extrusion process is commonly controlled in a feed-forward fashion. The amount of material to be extruded at each printing location is pre-computed by a planning software. This approach is inherently unable to adapt the extrusion to external and unexpected disturbances, and the quality of the results strongly depends on a number of modeling and tun…
▽ More
In material extrusion additive manufacturing, the extrusion process is commonly controlled in a feed-forward fashion. The amount of material to be extruded at each printing location is pre-computed by a planning software. This approach is inherently unable to adapt the extrusion to external and unexpected disturbances, and the quality of the results strongly depends on a number of modeling and tuning parameters. To overcome these limitations, we propose the first framework for Force Controlled Printing for material extrusion additive manufacturing. We utilize a custom-built extruder to measure the extrusion force in real time, and use this quantity as feedback to continuously control the material flow in closed-loop. We demonstrate the existence of a strong correlation between extrusion force and line width, which we exploit to deposit lines of desired width in a width range of 33 % up to 233 % of the nozzle diameter. We also show how Force Controlled Printing outperforms conventional feed-forward extrusion in print quality and disturbance rejection, while requiring little tuning and automatically adapting to changes in the hardware settings. With no adaptation, Force Controlled Printing can deposit lines of desired width under severe disturbances in bed leveling, such as at layer heights ranging between 20 % and 200 % of the nominal height.
△ Less
Submitted 24 March, 2024;
originally announced March 2024.
-
Stress Flow Guided Non-Planar Print Trajectory Optimization for Additive Manufacturing of Anisotropic Polymers
Authors:
Xavier Guidetti,
Efe C. Balta,
Yannick Nagel,
Hang Yin,
Alisa Rupenyan,
John Lygeros
Abstract:
When manufacturing parts using material extrusion additive manufacturing and anisotropic polymers, the mechanical properties of a manufactured component are strongly dependent on the print trajectory orientation. We conduct non-planar slicing and optimize the print trajectories to maximize the alignment between the material deposition direction and the stress flow induced by a predefined load case…
▽ More
When manufacturing parts using material extrusion additive manufacturing and anisotropic polymers, the mechanical properties of a manufactured component are strongly dependent on the print trajectory orientation. We conduct non-planar slicing and optimize the print trajectories to maximize the alignment between the material deposition direction and the stress flow induced by a predefined load case. The trajectory optimization framework considers manufacturability constraints in the form of uniform layer height and line spacing. We demonstrate the method by manufacturing a load bearing mechanical bracket using a 5-axis 3D printer and a liquid crystal polymer material. The failure strength and stiffness of the optimized bracket are improved by a factor of 44 and 6 respectively when compared with conventional printing.
△ Less
Submitted 12 June, 2023; v1 submitted 12 January, 2023;
originally announced January 2023.
-
Data-Driven Process Optimization of Fused Filament Fabrication based on In Situ Measurements
Authors:
Xavier Guidetti,
Marino Kühne,
Yannick Nagel,
Efe C. Balta,
Alisa Rupenyan,
John Lygeros
Abstract:
The tuning of fused filament fabrication parameters is notoriously challenging. We propose an autonomous data-driven method to select parameters based on in situ measurements. We use a laser sensor to evaluate the surface roughness of a printed part. We then correlate the roughness to the mechanical properties of the part, and show how print quality affects mechanical performance. Finally, we use…
▽ More
The tuning of fused filament fabrication parameters is notoriously challenging. We propose an autonomous data-driven method to select parameters based on in situ measurements. We use a laser sensor to evaluate the surface roughness of a printed part. We then correlate the roughness to the mechanical properties of the part, and show how print quality affects mechanical performance. Finally, we use Bayesian optimization to search for optimal print parameters. We demonstrate our method by printing liquid crystal polymer samples, and successfully find parameters that produce high-performance prints and maximize the manufacturing process efficiency.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.