-
Optimized Waveform Design for OFDM-based ISAC Systems Under Limited Resource Occupancy
Authors:
Silvia Mura,
Dario Tagliaferri,
Marouan Mizmizi,
Umberto Spagnolini,
Athina Petropulu
Abstract:
The sixth generation (6G) of wireless networks introduces integrated sensing and communication (ISAC), a technology in which communication and sensing functionalities are inextricably linked, sharing resources across time, frequency, space, and energy. Despite its popularity in communication, the orthogonal frequency division multiplexing (OFDM) waveform, while advantageous for communication, has…
▽ More
The sixth generation (6G) of wireless networks introduces integrated sensing and communication (ISAC), a technology in which communication and sensing functionalities are inextricably linked, sharing resources across time, frequency, space, and energy. Despite its popularity in communication, the orthogonal frequency division multiplexing (OFDM) waveform, while advantageous for communication, has limitations in sensing performance within an ISAC network. This paper delves into OFDM waveform design through optimal resource allocation over time, frequency, and energy, maximizing sensing performance while preserving communication quality.
During quasi-normal operation, the Base Station (BS) does not utilize all available time-frequency resources, resulting in high sidelobes in the OFDM waveform's ambiguity function, as well as decreased sensing accuracy. To address these latter issues, the paper proposes a novel interpolation technique using matrix completion through the Schatten p quasi-normal approximation, which requires fewer samples than the traditional nuclear norm for effective matrix completion and interpolation. This approach effectively suppresses the sidelobes, enhancing the sensing performance. Numerical simulations confirm that the proposed method outperforms state-of-the-art frameworks, such as standard complaint resource scheduling and interpolation, particularly in scenarios with limited resource occupancy.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Optimizing Curved EM Skins for Opportunistic Relaying in Vehicular Networks
Authors:
Reza Aghazadeh Ayoubi,
Silvia Mura,
Dario Tagliaferri,
Marouan Mizmizi,
Umberto Spagnolini
Abstract:
Electromagnetic skins (EMSs) are recognized for enhancing communication performance, spanning from coverage to capacity. While much of the scientific literature focuses on reconfigurable intelligent surfaces that dynamically adjust phase configurations over time, this study takes a different approach by considering low-cost static passive curved EMS (CEMS)s. These are pre-configured during manufac…
▽ More
Electromagnetic skins (EMSs) are recognized for enhancing communication performance, spanning from coverage to capacity. While much of the scientific literature focuses on reconfigurable intelligent surfaces that dynamically adjust phase configurations over time, this study takes a different approach by considering low-cost static passive curved EMS (CEMS)s. These are pre-configured during manufacturing to conform to the shape of irregular surfaces, e.g., car doors, effectively transforming them into anomalous mirrors. This design allows vehicles to serve as opportunistic passive relays, mitigating blockage issues in vehicular networks. This paper delves into a novel design method for the phase profile of CEMS based on coarse a-priori distributions of incident and reflection angles onto the surface, influenced by vehicular traffic patterns. A penalty-based method is employed to optimize both the average spectral efficiency (SE) and average coverage probability, and it is compared against a lower-complexity and physically intuitive modular architecture, utilizing a codebook-based discrete optimization technique. Numerical results demonstrate that properly designed CEMS lead to a remarkable improvements in average SE and coverage probability, namely when the direct path is blocked.
△ Less
Submitted 15 May, 2024;
originally announced May 2024.
-
A Thorough Analysis of Radio Resource Assignment for UAV-Enhanced Vehicular Sidelink Communications
Authors:
Francesca Conserva,
Francesco Linsalata,
Marouan Mizmizi,
Maurizio Magarini,
Umberto Spagnolini,
Roberto Verdone,
Chiara Buratti
Abstract:
The rapid expansion of connected and autonomous vehicles (CAVs) and the shift towards millimiter-wave (mmWave) frequencies offer unprecedented opportunities to enhance road safety and traffic efficiency. Sidelink communication, enabling direct Vehicle-to-Vehicle (V2V) communications, play a pivotal role in this transformation. As communication technologies transit to higher frequencies, the associ…
▽ More
The rapid expansion of connected and autonomous vehicles (CAVs) and the shift towards millimiter-wave (mmWave) frequencies offer unprecedented opportunities to enhance road safety and traffic efficiency. Sidelink communication, enabling direct Vehicle-to-Vehicle (V2V) communications, play a pivotal role in this transformation. As communication technologies transit to higher frequencies, the associated increase in bandwidth comes at the cost of a severe path and penetration loss. In response to these challenges, we investigate a network configuration that deploys beamforming-capable Unmanned Aerial Vehicles (UAVs) as relay nodes. In this work, we present a comprehensive analytical framework with a groundbreaking performance metric, i.e. average access probability, that quantifies user satisfaction, considering factors across different protocol stack layers. Additionally, we introduce two Radio Resources Assignment (RRA) methods tailored for UAVs. These methods consider parameters such as resource availability, vehicle distribution, and latency requirements. Through our analytical approach, we optimize the average access probability by controlling UAV altitude based on traffic density. Our numerical findings validate the proposed model and strategy, which ensures that Quality of Service (QoS) standards are met in the domain of Vehicle-to-Anything (V2X) sidelink communications.
△ Less
Submitted 19 January, 2024;
originally announced March 2024.
-
Deep Learning-based Target-To-User Association in Integrated Sensing and Communication Systems
Authors:
Lorenzo Cazzella,
Marouan Mizmizi,
Dario Tagliaferri,
Damiano Badini,
Matteo Matteucci,
Umberto Spagnolini
Abstract:
In Integrated Sensing and Communication (ISAC) systems, matching the radar targets with communication user equipments (UEs) is functional to several communication tasks, such as proactive handover and beam prediction. In this paper, we consider a radar-assisted communication system where a base station (BS) is equipped with a multiple-input-multiple-output (MIMO) radar that has a double aim: (i) a…
▽ More
In Integrated Sensing and Communication (ISAC) systems, matching the radar targets with communication user equipments (UEs) is functional to several communication tasks, such as proactive handover and beam prediction. In this paper, we consider a radar-assisted communication system where a base station (BS) is equipped with a multiple-input-multiple-output (MIMO) radar that has a double aim: (i) associate vehicular radar targets to vehicular equipments (VEs) in the communication beamspace and (ii) predict the beamforming vector for each VE from radar data. The proposed target-to-user (T2U) association consists of two stages. First, vehicular radar targets are detected from range-angle images, and, for each, a beamforming vector is estimated. Then, the inferred per-target beamforming vectors are matched with the ones utilized at the BS for communication to perform target-to-user (T2U) association. Joint multi-target detection and beam inference is obtained by modifying the you only look once (YOLO) model, which is trained over simulated range-angle radar images. Simulation results over different urban vehicular mobility scenarios show that the proposed T2U method provides a probability of correct association that increases with the size of the BS antenna array, highlighting the respective increase of the separability of the VEs in the beamspace. Moreover, we show that the modified YOLO architecture can effectively perform both beam prediction and radar target detection, with similar performance in mean average precision on the latter over different antenna array sizes.
△ Less
Submitted 10 January, 2024;
originally announced January 2024.
-
Multi-View Near-field Imaging in NLOS with Non-Reconfigurable EM Skins
Authors:
Davide Tornielli Bellini,
Dario Tagliaferri,
Marouan Mizmizi,
Stefano Tebaldini,
Umberto Spagnolini
Abstract:
This paper deals with radar imaging in non-line of sight (NLOS) with the aid of non-reconfigurable electromagnetic skins (NR-EMSs). NR-EMSs are passive metasurfaces whose reflection properties are defined during the manufacturing process, and represent a low-cost alternative to reconfigurable intelligent surfaces to implement advanced wave manipulations. We propose and discuss a multi-view near-fi…
▽ More
This paper deals with radar imaging in non-line of sight (NLOS) with the aid of non-reconfigurable electromagnetic skins (NR-EMSs). NR-EMSs are passive metasurfaces whose reflection properties are defined during the manufacturing process, and represent a low-cost alternative to reconfigurable intelligent surfaces to implement advanced wave manipulations. We propose and discuss a multi-view near-field radar imaging system where a moving source progressively illuminates different portions of the NR-EMS, whereby each portion (\textit{module}) is purposely phase-configured to focus the im**ing radiation over a desired NLOS area of interest. The source, e.g., a radar-equipped vehicle, synthesizes a wide aperture that maps onto the NR-EMS, allowing NLOS imaging with enhanced resolution compared to the standalone radar capabilities. Simulation results show the feasibility and benefits of such an imaging approach and shed light on a possible practical application of metasurfaces for sensing.
△ Less
Submitted 12 January, 2024;
originally announced January 2024.
-
Waveform Design for OFDM-based ISAC Systems Under Resource Occupancy Constraint
Authors:
Silvia Mura,
Dario Tagliaferri,
Marouan Mizmizi,
Umberto Spagnolini,
Athina Petropulu
Abstract:
Integrated Sensing and Communication (ISAC) is one of the key pillars envisioned for 6G wireless systems. ISAC systems combine communication and sensing functionalities over a single waveform, with full resource sharing. In particular, waveform design for legacy Orthogonal Frequency Division Multiplexing (OFDM) systems consists of a suitable time-frequency resource allocation policy balancing betw…
▽ More
Integrated Sensing and Communication (ISAC) is one of the key pillars envisioned for 6G wireless systems. ISAC systems combine communication and sensing functionalities over a single waveform, with full resource sharing. In particular, waveform design for legacy Orthogonal Frequency Division Multiplexing (OFDM) systems consists of a suitable time-frequency resource allocation policy balancing between communication and sensing performance. Over time and/or frequency, having unused resources leads to an ambiguity function with high sidelobes that significantly affect the performance of ISAC for OFDM waveforms. This paper proposes an OFDM-based ISAC waveform design that takes into account communication and resource occupancy constraints. The proposed method minimizes the Cramér-Rao Bound (CRB) on delay and Doppler estimation for two closely spaced targets. Moreover, the paper addresses the under-sampling issue by interpolating the estimated sensing channel based on matrix completion via Schatten $p$-norm approximation. Numerical results show that the proposed waveform outperforms the state-of-the-art methods.
△ Less
Submitted 19 December, 2023;
originally announced December 2023.
-
Cooperative Coherent Multistatic Imaging and Phase Synchronization in Networked Sensing
Authors:
Dario Tagliaferri,
Marco Manzoni,
Marouan Mizmizi,
Stefano Tebaldini,
Andrea Virgilio Monti-Guarnieri,
Claudio Maria Prati,
Umberto Spagnolini
Abstract:
Coherent multistatic radio imaging represents a pivotal opportunity for forthcoming wireless networks, which involves distributed nodes cooperating to achieve accurate sensing resolution and robustness. This paper delves into cooperative coherent imaging for vehicular radar networks. Herein, multiple radar-equipped vehicles cooperate to improve collective sensing capabilities and address the funda…
▽ More
Coherent multistatic radio imaging represents a pivotal opportunity for forthcoming wireless networks, which involves distributed nodes cooperating to achieve accurate sensing resolution and robustness. This paper delves into cooperative coherent imaging for vehicular radar networks. Herein, multiple radar-equipped vehicles cooperate to improve collective sensing capabilities and address the fundamental issue of distinguishing weak targets in close proximity to strong ones, a critical challenge for vulnerable road users protection. We prove the significant benefits of cooperative coherent imaging in the considered automotive scenario in terms of both probability of correct detection, evaluated considering several system parameters, as well as resolution capabilities, showcased by a dedicated experimental campaign wherein the collaboration between two vehicles enables the detection of the legs of a pedestrian close to a parked car. Moreover, as \textit{coherent} processing of several sensors' data requires very tight accuracy on clock synchronization and sensor's positioning -- referred to as \textit{phase synchronization} -- (such that to predict sensor-target distances up to a fraction of the carrier wavelength), we present a general three-step cooperative multistatic phase synchronization procedure, detailing the required information exchange among vehicles in the specific automotive radar context and assessing its feasibility and performance by hybrid Cramér-Rao bound.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Enhanced Channel Estimation in mm-Wave MIMO Systems Leveraging Integrated Communication and Sensing
Authors:
Silvia Mura,
Marouan Mizmizi,
Umberto Spagnolini,
Athina Petropulu
Abstract:
This paper tackles the challenge of wideband MIMO channel estimation within indoor millimeter-wave scenarios. Our proposed approach exploits the integrated sensing and communication paradigm, where sensing information aids in channel estimation. The key innovation consists of employing both spatial and temporal sensing modes to significantly reduce the number of required training pilots. Moreover,…
▽ More
This paper tackles the challenge of wideband MIMO channel estimation within indoor millimeter-wave scenarios. Our proposed approach exploits the integrated sensing and communication paradigm, where sensing information aids in channel estimation. The key innovation consists of employing both spatial and temporal sensing modes to significantly reduce the number of required training pilots. Moreover, our algorithm addresses and corrects potential mismatches between sensing and communication modes, which can arise from differing sensing and communication propagation paths. Extensive simulations demonstrate that the proposed method requires 4x less pilots compared to the current state-of-the-art, marking a substantial advancement in channel estimation efficiency.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Reconfigurable and Static EM Skins on Vehicles for Localization
Authors:
Dario Tagliaferri,
Marouan Mizmizi,
Giacomo Oliveri,
Umberto Spagnolini,
Andrea Massa
Abstract:
Electromagnetic skins (EMSs) have been recently considered as a booster for wireless sensing, but their usage on mobile targets is relatively novel and could be of interest when the target reflectivity can/must be increased to improve its detection or the estimation of parameters. In particular, when illuminated by a wide-bandwidth signal (e.g., from a radar operating at millimeter waves), vehicle…
▽ More
Electromagnetic skins (EMSs) have been recently considered as a booster for wireless sensing, but their usage on mobile targets is relatively novel and could be of interest when the target reflectivity can/must be increased to improve its detection or the estimation of parameters. In particular, when illuminated by a wide-bandwidth signal (e.g., from a radar operating at millimeter waves), vehicles behave like \textit{extended targets}, since multiple parts of the vehicle's body effectively contribute to the back-scattering. Moreover, in some cases perspective deformations challenge the correct localization of the vehicle. To address these issues, we propose lodging EMSs on vehicles' roof to act as high-reflectivity planar retro-reflectors toward the sensing terminal. The advantage is twofold: \textit{(i)} by introducing a compact high-reflectivity structure on the target, we make vehicles behave like \textit{point targets}, avoiding perspective deformations and related ranging biases and \textit{(ii)} we increase the reflectivity the vehicle, improving localization performance. We detail the EMS design from the system-level to the full-wave-level considering both reconfigurable intelligent surfaces (RIS) and cost-effective static passive electromagnetic skins (SP-EMSs). Localization performance of the EMS-aided sensing system is also assessed by Cramér-Rao bound analysis in both narrowband and spatially wideband operating conditions.
△ Less
Submitted 8 August, 2023;
originally announced August 2023.
-
Space-Time Phase Coupling in STMM-based Wireless Communications
Authors:
Marouan Mizmizi,
Dario Tagliaferri,
Marco Di Renzo,
Umberto Spagnolini
Abstract:
Space-time modulated metasurfaces (STMMs) are a recently proposed generalization of reconfigurable intelligent surfaces, which include a proper time-varying phase at the metasurface elements, enabling higher flexibility and control of the reflected signals. The spatial component can be designed to control the direction of reflection, while the temporal one can be adjusted to change the frequency o…
▽ More
Space-time modulated metasurfaces (STMMs) are a recently proposed generalization of reconfigurable intelligent surfaces, which include a proper time-varying phase at the metasurface elements, enabling higher flexibility and control of the reflected signals. The spatial component can be designed to control the direction of reflection, while the temporal one can be adjusted to change the frequency of the reflected signal or to convey information. However, the coupling between the spatial and temporal phases at the STMM can adversely affect its performance. Therefore, this paper analyzes the system parameters that affect the space-time coupling. Furthermore, two methods for space-time decoupling are investigated. Numerical results highlight the effectiveness of the proposed decoupling methods and reveal that the space-time phase coupling increases with the bandwidth of the temporal phase, the size of the STMM, and with grazing angles of incidence onto the STMM.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Wavefield Networked Sensing: Principles, Algorithms and Applications
Authors:
Marco Manzoni,
Dario Tagliaferri,
Stefano Tebaldini,
Marouan Mizmizi,
Andrea Virgilio Monti-Guarnieri,
Claudio Maria Prati,
Umberto Spagnolini
Abstract:
Networked sensing refers to the capability of properly orchestrating multiple sensing terminals to enhance specific figures of merit, e.g., positioning accuracy or imaging resolution. Regarding radio-based sensing, it is essential to understand \textit{when} and \textit{how} sensing terminals should be orchestrated, namely the best cooperation that trades between performance and cost (e.g., energy…
▽ More
Networked sensing refers to the capability of properly orchestrating multiple sensing terminals to enhance specific figures of merit, e.g., positioning accuracy or imaging resolution. Regarding radio-based sensing, it is essential to understand \textit{when} and \textit{how} sensing terminals should be orchestrated, namely the best cooperation that trades between performance and cost (e.g., energy consumption, communication overhead, and complexity). This paper addresses networked sensing from a physics-driven perspective, aiming to provide a general theoretical benchmark to evaluate its \textit{imaging} performance bounds and to guide the sensing orchestration accordingly. Diffraction tomography theory (DTT) is the method to quantify the imaging resolution of any radio sensing experiment from inspection of its spectral (or wavenumber) content. In networked sensing, the image formation is based on the back-projection integral, valid for any network topology and physical configuration of the terminals. The \textit{wavefield networked sensing} is a framework in which multiple sensing terminals are orchestrated during the acquisition process to maximize the imaging quality (resolution and grating lobes suppression) by pursuing the deceptively simple \textit{wavenumber tessellation principle}. We discuss all the cooperation possibilities between sensing terminals and possible killer applications. Remarkably, we show that the proposed method allows obtaining high-quality images of the environment in limited bandwidth conditions, leveraging the coherent combination of multiple multi-static low-resolution images.
△ Less
Submitted 17 May, 2023;
originally announced May 2023.
-
Target-to-User Association in ISAC Systems With Vehicle-Lodged RIS
Authors:
Marouan Mizmizi,
Dario Tagliaferri,
Damiano Badini,
Umberto Spagnolini
Abstract:
Target-to-user (T2U) association is a prerequisite to fully exploit the potential of the sensing function in communication-centric integrated sensing and communication (ISAC) systems, e.g., for beam and blockage management. This letter proposes to purposely mount a RIS on the roof of the vehicular user equipment (VUE), which can serve as an intentional back-reflector towards the base station. By c…
▽ More
Target-to-user (T2U) association is a prerequisite to fully exploit the potential of the sensing function in communication-centric integrated sensing and communication (ISAC) systems, e.g., for beam and blockage management. This letter proposes to purposely mount a RIS on the roof of the vehicular user equipment (VUE), which can serve as an intentional back-reflector towards the base station. By controlling the reflection pattern over time, it is possible to transmit information to the sensing system, i.e., back-reflection as bit 1, no back-reflection as bit 0. The VUEs are configured to back-reflect a Hadamard code sequence, which enables T2U association. The numerical results confirm the validity of our proposal.
△ Less
Submitted 14 March, 2023;
originally announced March 2023.
-
Wireless Communications with Space-Time Modulated Metasurfaces
Authors:
Marouan Mizmizi,
Dario Tagliaferri,
Umberto Spagnolini
Abstract:
Space-time modulated metasurfaces (STMMs) are a newly investigated technology for next 6G generation wireless communication networks. An STMM augments the spatial phase function with a time-varying one across the elements, allowing for the conveyance of information that possibly modulates the im**ing signal. Hence, STMM represents an evolution of reconfigurable intelligent surfaces (RIS), which…
▽ More
Space-time modulated metasurfaces (STMMs) are a newly investigated technology for next 6G generation wireless communication networks. An STMM augments the spatial phase function with a time-varying one across the elements, allowing for the conveyance of information that possibly modulates the im**ing signal. Hence, STMM represents an evolution of reconfigurable intelligent surfaces (RIS), which only design the spatial phase pattern. STMMs convey signals without a relevant increase in the energy budget, which is convenient for applications where energy is a strong constraint. This paper proposes a mathematical model for STMM-based wireless communication, that creates the basics for two potential STMM architectures. One has excellent design flexibility, whereas the other is more cost-effective. The model describes STMM's distinguishing features, such as space-time coupling, and their impact on system performance. The proposed STMM model addresses the design criteria of a full-duplex system architecture, in which the temporal signal originating at the STMM generates a modulation overlapped with the incident one. The presented numerical results demonstrate the efficacy of the proposed model and its potential to revolutionize wireless communication.
△ Less
Submitted 7 December, 2023; v1 submitted 16 February, 2023;
originally announced February 2023.
-
Integrated Sensing and Communication System via Dual-Domain Waveform Superposition
Authors:
Dario Tagliaferri,
Marouan Mizmizi,
Silvia Mura,
Francesco Linsalata,
Davide Scazzoli,
Damiano Badini,
Maurizio Magarini,
Umberto Spagnolini
Abstract:
Integrated Sensing and Communication (ISAC) systems are recognised as one of the key ingredients of the sixth generation (6G) network. A challenging topic in ISAC is the design of a single waveform combining both communication and sensing functionalities on the same time-frequency-space resources, allowing to tune the performance of both with partial or full hardware sharing. This paper proposes a…
▽ More
Integrated Sensing and Communication (ISAC) systems are recognised as one of the key ingredients of the sixth generation (6G) network. A challenging topic in ISAC is the design of a single waveform combining both communication and sensing functionalities on the same time-frequency-space resources, allowing to tune the performance of both with partial or full hardware sharing. This paper proposes a dual-domain waveform design approach that superposes onto the frequency-time (FT) domain both the legacy orthogonal frequency division multiplexing (OFDM) signal and a sensing one, purposely designed in the delay-Doppler domain. With a proper power downscaling of the sensing signal w.r.t. OFDM, it is possible to exceed regulatory bandwidth limitations proper of legacy multicarrier systems to increase the sensing performance while leaving communication substantially unaffected. Numerical and experimental results prove the effectiveness of the dual-domain waveform, notwithstanding a power abatement of at least 30 dB of the signal used for sensing compared to the one used for communication. The dual-domain ISAC waveform outperforms both OFDM and orthogonal time-frequency-space (OTFS) in terms of Cramér-Rao bound on delay estimation (up to 20 dB), thanks to its superior resolution, with a negligible penalty on the achievable rate.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Network-Controlled Repeaters vs. Reconfigurable Intelligent Surfaces for 6G mmW Coverage Extension
Authors:
Reza Aghazadeh Ayoubi,
Marouan Mizmizi,
Dario Tagliaferri,
Danilo De Donno,
Umberto Spagnolini
Abstract:
Network-controlled repeaters (NCR) and reconfigurable intelligent surfaces (RIS) are being considered by the third generation partnership project (3GPP) as valid candidates for range extension in millimeter-wave (mmW, 30-300 GHz frequency) 5G and 6G networks, to counteract large path and penetration losses. Nowadays, there is no definite answer on which of the two technologies is better for covera…
▽ More
Network-controlled repeaters (NCR) and reconfigurable intelligent surfaces (RIS) are being considered by the third generation partnership project (3GPP) as valid candidates for range extension in millimeter-wave (mmW, 30-300 GHz frequency) 5G and 6G networks, to counteract large path and penetration losses. Nowadays, there is no definite answer on which of the two technologies is better for coverage extension, since existing comparative studies focused either on communication-related metrics only or on very large-scale analysis, without physical layer details or environmental considerations. This paper aims at comparing NCR and RIS solutions in terms of coverage in an urban scenario. Numerical results suggest a possible usage of both technologies, showing that preferring RIS or NCR depends not only on their physical capabilities and cost (e.g., the number of antenna elements, the angular separation between panels for NCR, etc.) but also on environment geometry.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Advanced Tri-Sectoral Multi-User Millimeter-Wave Smart Repeater
Authors:
Kai Dong,
Silvia Mura,
Marouan Mizmizi,
Dario Tagliaferri,
Umberto Spagnolini
Abstract:
Smart Repeaters (SR) can potentially enhance the coverage in Millimeter-wave (mmWave) wireless communications. However, the angular coverage of the existing two-panel SR is too limited to make the SR a truly cost-effective mmWave range extender. This paper proposes the usage of a tri-sectoral Advanced SR (ASR) to extend the angular coverage with respect to conventional SR. We propose a multi-user…
▽ More
Smart Repeaters (SR) can potentially enhance the coverage in Millimeter-wave (mmWave) wireless communications. However, the angular coverage of the existing two-panel SR is too limited to make the SR a truly cost-effective mmWave range extender. This paper proposes the usage of a tri-sectoral Advanced SR (ASR) to extend the angular coverage with respect to conventional SR. We propose a multi-user precoder optimization for ASR in a downlink multi-carrier communication system to maximize the number of served User Equipments (UEs) while guaranteeing constraints on per-UE rate and time-frequency resources. Numerical results show the benefits of the ASR against conventional SR in terms of both cumulative spectral efficiency and number of served UEs (both improved by an average factor 2), varying the system parameters.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Conformal Metasurfaces for Recovering Dynamic Blockage in Vehicular Systems
Authors:
Marouan Mizmizi,
Dario Tagliaferri,
Misagh Khosronejad,
Laura Resteghini,
Gian Guido Gentili,
Lorenza Draghi,
Umberto Spagnolini
Abstract:
Intelligent reflecting surfaces (IRS) will represent a key technology in the upcoming sixth-generation (6G) communication networks to extend the network coverage and overcome link blockage. Research on IRS is expected to take a giant leap in the coming years to address the current technological limitations, mainly regarding the IRS re-configuration in highly dynamic scenarios, such as vehicle-to-v…
▽ More
Intelligent reflecting surfaces (IRS) will represent a key technology in the upcoming sixth-generation (6G) communication networks to extend the network coverage and overcome link blockage. Research on IRS is expected to take a giant leap in the coming years to address the current technological limitations, mainly regarding the IRS re-configuration in highly dynamic scenarios, such as vehicle-to-vehicle (V2V) ones. This paper proposes a fully passive and low-cost solution based on pre-configured IRS to be lodged on the vehicle's body, which does not require any signaling for re-configuration. However, conventional IRS are planar array and cannot fit with most vehicles' silhouettes. Hence, the proposed design targets conformal surfaces (C-IRS) with an arbitrary shape. In particular, this paper reveals the first experimental findings on the realization of C-IRS operating at 26 GHz and measurements in anechoic chamber, which validate the analytical derivations. To demonstrate the benefits of the proposed solution, numerical simulations in a V2V scenario show that, when the percentage of vehicles equip** a C-IRS increases, the communication becomes more robust to vehicles' blockage and the average end-to-end SNR is enhanced up to 25 dB.
△ Less
Submitted 14 August, 2022;
originally announced August 2022.
-
Localizing the Vehicle's Antenna: an Open Problem in 6G Network Sensing
Authors:
Francesco Linsalata,
Dario Tagliaferri,
Luca Rinaldi,
Lorenzo Bezzetto,
Marouan Mizmizi,
Davide Scazzoli,
Damiano Badini,
Christian Mazzucco,
Maurizio Magarini,
Umberto Spagnolini
Abstract:
Millimeter Waves (mmW) and sub-THz frequencies are the candidate bands for the upcoming Sixth Generation (6G) of communication systems. The use of collimated beams at mmW/sub-THz to compensate for the increased path and penetration loss arises the need for a seamless Beam Management (BM), especially for high mobility scenarios such as the Vehicle-to-Infrastructure (V2I) one. Recent research advanc…
▽ More
Millimeter Waves (mmW) and sub-THz frequencies are the candidate bands for the upcoming Sixth Generation (6G) of communication systems. The use of collimated beams at mmW/sub-THz to compensate for the increased path and penetration loss arises the need for a seamless Beam Management (BM), especially for high mobility scenarios such as the Vehicle-to-Infrastructure (V2I) one. Recent research advances in Integrated Sensing and Communication (ISAC) indicate that equip** the network infrastructure, e.g., the Base Station (BS), with either a stand-alone radar or sensing capabilities using optimized waveforms, represents the killer technology to facilitate the BM. However, radio sensing should accurately localize the Vehicular Equipment (VE)'s antenna, which is not guaranteed in general. Differently, employing side information from VE's onboard positioning sensors might overcome this limitation at the price of an increased control signaling between VE and BS. This paper provides a pragmatic comparison between radar-assisted and position-assisted BM for mmW V2I systems in a typical urban scenario in terms of BM training time and beamforming gain loss due to a wrong BM decision. Simulation results, supported by experimental evidence, show that the point target approximation of a traveling VE does not hold in practical V2I scenarios with radar-equipped BS. Therefore, the true antenna position has a residual uncertainty that is independent of radar's resolution and implies 50\,\% more BM training time on average. Moreover, there is not a winning technology for BM between BS-mounted radar and VE's onboard positioning systems. They provide complementary performance, depending on position, although outperforming blind BM techniques compared to conventional blind methods. Thus, we propose to optimally combine radar and positioning information in a multi-technology integrated BM solution.
△ Less
Submitted 3 April, 2022;
originally announced April 2022.
-
Conformal Metasurfaces: a Novel Solution for Vehicular Communications
Authors:
Marouan Mizmizi,
Reza Aghazadeh Ayoubi,
Dario Tagliaferri,
Kai Dong,
Gian Guido Gentili,
Umberto Spagnolini
Abstract:
In future 6G millimeter wave (mmWave)/sub-THz vehicle-to-everything (V2X) communication systems, vehicles are expected to be equipped with massive antenna arrays to realize beam-based links capable of compensating for the severe path loss. However, vehicle-to-vehicle (V2V) direct links are prone to be blocked by surrounding vehicles. Emerging metasurface technologies enable the control of the elec…
▽ More
In future 6G millimeter wave (mmWave)/sub-THz vehicle-to-everything (V2X) communication systems, vehicles are expected to be equipped with massive antenna arrays to realize beam-based links capable of compensating for the severe path loss. However, vehicle-to-vehicle (V2V) direct links are prone to be blocked by surrounding vehicles. Emerging metasurface technologies enable the control of the electromagnetic wave reflection towards the desired direction, enriching the channel scattering to boost communication performance. Reconfigurable intelligent surfaces (RIS), and mostly the pre-configured counterpart intelligent reflecting surfaces (IRS), are a promising low-cost relaying system for 6G. This paper proposes using conformal metasurfaces (either C-RIS or C-IRS) deployed on vehicles' body to mitigate the blockage impact in a highway multi-lane scenario. In particular, conformal metasurfaces create artificial reflections to mitigate blockage by compensating for the non-flat shape of the vehicle's body, such as the lateral doors, with proper phase patterns. We analytically derive the phase pattern to apply to a cylindrical C-RIS/C-IRS approximating the shape of the car body, as a function of both incidence and reflection angles, considering cylindrical RIS/IRS as a generalization of conventional planar ones. We propose a novel design for optimally pre-configured C-IRS to mimic the behavior of an EM flat surface on car doors, proving the benefits of C-RIS and C-IRS in a multi-lane V2V highway scenario. The results show a consistent reduction of blockage probability when exploiting C-RIS/C-IRS, 20% for pre-configured C-IRS, and 70% for C-RIS, as well as a remarkable improvement in terms of average signal-to-noise ratio, respectively 10-20 dB for C-IRS and 30-40 dB for C-RIS.
△ Less
Submitted 21 January, 2022;
originally announced January 2022.
-
Dual Domain Waveform Design for Joint Communication and Sensing Systems
Authors:
Luca Rinaldi,
Dario Tagliaferri,
Francesco Linsalata,
Marouan Mizmizi,
Maurizio Magarini,
Umberto Spagnolini
Abstract:
The evolution of wireless communication systems towards millimeter-wave ($30-100$ GHz) and sub-THz ($>100$ GHz) frequency bands highlighted the need for accurate and fast beam management and a proactive link-blockage prediction in high-mobility scenarios. Joint Communication and Sensing (JC\&S) systems aim at equip** communication terminals with sensing capabilities using the same time/frequency…
▽ More
The evolution of wireless communication systems towards millimeter-wave ($30-100$ GHz) and sub-THz ($>100$ GHz) frequency bands highlighted the need for accurate and fast beam management and a proactive link-blockage prediction in high-mobility scenarios. Joint Communication and Sensing (JC\&S) systems aim at equip** communication terminals with sensing capabilities using the same time/frequency/space communication resources to solve, or alleviate, the aforementioned issues. For an efficient implementation, a suitable waveform design that combines communication and sensing capabilities is of utmost importance. This paper proposes a novel dual-domain waveform design approach that superimposes onto the Frequency-Time (FT) domain both the legacy orthogonal frequency division multiplexing modulation scheme and a sensing signal, purposely designed in the Delay-Doppler (DD) domain. The power of the two signals is properly allocated in FT and DD domains, respectively, to reduce their mutual interference and optimize both communication and sensing tasks. Numerical results show the effectiveness of the proposed JC\&S waveform design approach, yielding target communication and sensing performance with a full time-frequency resource sharing.
△ Less
Submitted 24 November, 2021;
originally announced November 2021.
-
Spatial-Interference Aware Cooperative Resource Allocation for 5G NR Sidelink Communications
Authors:
Silvia Mura,
Francesco Linsalata,
Marouan Mizmizi,
Maurizio Magarini,
Majid Nasiri Khormuji,
Peng Wang,
Alberto Perotti,
Umberto Spagnolini
Abstract:
Distributed resource allocation (RA) schemes have been introduced in cellular vehicle-to-everything (C-V2X) standard for vehicle-to-vehicle (V2V) sidelink (SL) communications to share the limited spectrum (sub-6GHz) efficiently. However, the recent progress in connected and automated vehicles and mobility services requires a huge amount of available spectrum resources. Therefore, millimeter-wave a…
▽ More
Distributed resource allocation (RA) schemes have been introduced in cellular vehicle-to-everything (C-V2X) standard for vehicle-to-vehicle (V2V) sidelink (SL) communications to share the limited spectrum (sub-6GHz) efficiently. However, the recent progress in connected and automated vehicles and mobility services requires a huge amount of available spectrum resources. Therefore, millimeter-wave and sub-THz frequencies are being considered as they offer a large free bandwidth. However, they require beamforming techniques to compensate for the higher path loss attenuation. The current fifth-generation (5G) RA standard for SL communication is inherited from the previous C-V2X standard, which is not suited for beam-based communication since it does not explore the spatial dimension. In this context, we propose a novel RA scheme that addresses the directional component by adding this third spatial dimension to the bandwidth part structure and promotes cooperation between vehicles in resource selection, namely cooperative three-dimensional RA. Numerical results show an average of 10% improvement in packet delivery ratio, an average 50% decrease in collision probability, and a 30% better channel busy ratio compared to the current standard, thus, confirming the validity of the proposed method.
△ Less
Submitted 15 November, 2021;
originally announced November 2021.
-
LoS-Map Construction for Proactive Relay of Opportunity Selection in 6G V2X Systems
Authors:
Francesco Linsalata,
Silvia Mura,
Marouan Mizmizi,
Maurizio Magarini,
Peng Wang,
Majid Nasiri Khormuji,
Alberto Perotti,
Umberto Spagnolini
Abstract:
Recent advances in Vehicle-to-Everything (V2X) technology and the upcoming sixth-generation (6G) network will dawn a new era for vehicular services with enhanced communication capabilities. Connected and Autonomous Vehicles (CAVs) are expected to deliver a new transportation experience, increasing the safety and efficiency of road networks. The use of millimeter-wave (mmW) frequencies guarantees a…
▽ More
Recent advances in Vehicle-to-Everything (V2X) technology and the upcoming sixth-generation (6G) network will dawn a new era for vehicular services with enhanced communication capabilities. Connected and Autonomous Vehicles (CAVs) are expected to deliver a new transportation experience, increasing the safety and efficiency of road networks. The use of millimeter-wave (mmW) frequencies guarantees a huge amount of bandwidth (> 1GHz) and a high data rate (> 10Gbit/s), which are required for CAVs applications. However, high frequency is impaired by severe path loss, and line of sight (LoS) propagation can be easily blocked by static and dynamic obstacles. Several solutions are being investigated, and the most promising one exploits relays. However, traditional relay schemes react to link failure and leverage instantaneous information, which impedes efficient relay selection in highly mobile and complex networks, such as vehicular scenarios. In this context, we propose a novel proactive relaying strategy that exploits the cooperation between CAVs and environment information to predict the dynamic LoS-map, which describes the links' evolution in time. The proactive relaying schemes exploit the dynamic LoS-map to maximize the network connectivity. A novel framework integrating realistic mobility patterns and geometric channel propagation models is proposed to analyze the performance in different scenarios. Numerical simulations suggest that the proactive relaying schemes mitigate beam blockage and maximize the average probability of connecting CAVs with reliable links.
△ Less
Submitted 5 April, 2022; v1 submitted 15 November, 2021;
originally announced November 2021.
-
Vehicular Blockage Modelling and Performance Analysis for mmWave V2V Communications
Authors:
Kai Dong,
Marouan Mizmizi,
Dario Tagliaferri,
Umberto Spagnolini
Abstract:
Vehicle-to-Everything (V2X) communications are revolutionizing the connectivity of transportation systems supporting safe and efficient road mobility. To meet the growing bandwidth eagerness of V2X services, millimeter-wave (e.g., 5G new radio over spectrum 26.50 - 48.20 GHz) and sub-THz (e.g., 120 GHz) frequencies are being investigated for the large available spectrum. Communication at these fre…
▽ More
Vehicle-to-Everything (V2X) communications are revolutionizing the connectivity of transportation systems supporting safe and efficient road mobility. To meet the growing bandwidth eagerness of V2X services, millimeter-wave (e.g., 5G new radio over spectrum 26.50 - 48.20 GHz) and sub-THz (e.g., 120 GHz) frequencies are being investigated for the large available spectrum. Communication at these frequencies requires beam-type connectivity as a solution for the severe path loss attenuation. However, beams can be blocked, with negative consequences for communication reliability. Blockage prediction is necessary and challenging when the blocker is dynamic in high mobility scenarios such as Vehicle-to-Vehicle (V2V). This paper presents an analytical model to derive the unconditional probability of blockage in a highway multi-lane scenario. The proposed model accounts for the traffic density, the 3D dimensions of the vehicles, and the position of the antennas. Moreover, by setting the communication parameters and a target quality of service, it is possible to predict the signal-to-noise ratio distribution and the service probability, which can be used for resource scheduling. Exhaustive numerical results confirm the validity of the proposed model.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Deep Learning of Transferable MIMO Channel Modes for 6G V2X Communications
Authors:
Lorenzo Cazzella,
Dario Tagliaferri,
Marouan Mizmizi,
Damiano Badini,
Christian Mazzucco,
Matteo Matteucci,
Umberto Spagnolini
Abstract:
In the emerging high mobility Vehicle-to-Everything (V2X) communications using millimeter Wave (mmWave) and sub-THz, Multiple-Input Multiple-Output (MIMO) channel estimation is an extremely challenging task. At mmWaves/sub-THz frequencies, MIMO channels exhibit few leading paths in the space-time domain (i.e., directions or arrival/departure and delays). Algebraic Low-rank (LR) channel estimation…
▽ More
In the emerging high mobility Vehicle-to-Everything (V2X) communications using millimeter Wave (mmWave) and sub-THz, Multiple-Input Multiple-Output (MIMO) channel estimation is an extremely challenging task. At mmWaves/sub-THz frequencies, MIMO channels exhibit few leading paths in the space-time domain (i.e., directions or arrival/departure and delays). Algebraic Low-rank (LR) channel estimation exploits space-time channel sparsity through the computation of position-dependent MIMO channel eigenmodes leveraging recurrent training vehicle passages in the coverage cell. LR requires vehicles' geographical positions and tens to hundreds of training vehicles' passages for each position, leading to significant complexity and control signalling overhead. Here we design a DL-based LR channel estimation method to infer MIMO channel eigenmodes in V2X urban settings, starting from a single LS channel estimate and without needing vehicle's position information. Numerical results show that the proposed method attains comparable Mean Squared Error (MSE) performance as the position-based LR. Moreover, we show that the proposed model can be trained on a reference scenario and be effectively transferred to urban contexts with different space-time channel features, providing comparable MSE performance without an explicit transfer learning procedure. This result eases the deployment in arbitrary dense urban scenarios.
△ Less
Submitted 31 August, 2021;
originally announced August 2021.
-
Position-agnostic Algebraic Estimation of 6G V2X MIMO Channels via Unsupervised Learning
Authors:
Lorenzo Cazzella,
Dario Tagliaferri,
Marouan Mizmizi,
Matteo Matteucci,
Damiano Badini,
Christian Mazzucco,
Umberto Spagnolini
Abstract:
MIMO systems in the context of 6G Vehicle-to-Everything (V2X) will require an accurate channel knowledge to enable efficient communication. Standard channel estimation techniques, such as Unconstrained Maximum Likelihood (U-ML), are extremely noisy in massive MIMO settings, while structured approaches, e.g., compressed sensing, are suited to low-mobility scenarios and are sensitive to hardware imp…
▽ More
MIMO systems in the context of 6G Vehicle-to-Everything (V2X) will require an accurate channel knowledge to enable efficient communication. Standard channel estimation techniques, such as Unconstrained Maximum Likelihood (U-ML), are extremely noisy in massive MIMO settings, while structured approaches, e.g., compressed sensing, are suited to low-mobility scenarios and are sensitive to hardware impairments. We propose a novel Multi-Vehicular algebraic channel estimation method for 6G V2X based on unsupervised learning which exploits recurrent vehicle passages in typical urban settings. Multiple training sequences are clustered via K-medoids algorithm based on their \textit{algebraic similarity} to retrieve the MIMO channel eigenmodes, which can be used to improve the channel estimates. Numerical results show remarkable benefits of the proposed method in terms of Mean Squared Error (MSE) compared to standard U-ML solution (15 dB less).
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
6G V2X Technologies and Orchestrated Sensing for Autonomous Driving
Authors:
Marouan Mizmizi,
Mattia Brambilla,
Dario Tagliaferri,
Christian Mazzucco,
Merouane Debbah,
Tomasz Mach,
Rino Simeone,
Silvio Mandelli,
Valerio Frascolla,
Renato Lombardi,
Maurizio Magarini,
Monica Nicoli,
Umberto Spagnolini
Abstract:
6G technology targets to revolutionize the mobility industry by revam** the role of wireless connections. In this article, we draw out our vision on an intelligent, cooperative, and sustainable mobility environment of the future, discussing how 6G will positively impact mobility services and applications. The scenario in focus is a densely populated area by smart connected entities that are mutu…
▽ More
6G technology targets to revolutionize the mobility industry by revam** the role of wireless connections. In this article, we draw out our vision on an intelligent, cooperative, and sustainable mobility environment of the future, discussing how 6G will positively impact mobility services and applications. The scenario in focus is a densely populated area by smart connected entities that are mutually connected over a 6G virtual bus, which enables access to an extensive and always up-to-date set of context-sensitive information. The augmented dataset is functional to let vehicles engage in adaptive and cooperative learning mechanisms, enabling fully automated functionalities with higher communication integrity and reduced risk of accidents while being a sentient and collaborative processing node of the same ecosystem. Smart sensing and communication technologies are discussed herein, and their convergence is devised by the pervasiveness of artificial intelligence in centralized or distributed and federated network architectures.
△ Less
Submitted 22 May, 2021;
originally announced June 2021.
-
Fastening the Initial Access in 5G NR Sidelink for 6G V2X Networks
Authors:
Marouan Mizmizi,
Francesco Linsalata,
Mattia Brambilla,
Filippo Morandi,
Kai Dong,
Maurizio Magarini,
Monica Nicoli,
Majid Nasiri Khormuji,
Peng Wang,
Renaud Alexandre Pitaval,
Umberto Spagnolini
Abstract:
The ever-increasing demand for intelligent, automated, and connected mobility solutions pushes for the development of an innovative sixth Generation (6G) of cellular networks. A radical transformation on the physical layer of vehicular communications is planned, with a paradigm shift towards beam-based millimeter Waves or sub-Terahertz communications, which require precise beam pointing for guaran…
▽ More
The ever-increasing demand for intelligent, automated, and connected mobility solutions pushes for the development of an innovative sixth Generation (6G) of cellular networks. A radical transformation on the physical layer of vehicular communications is planned, with a paradigm shift towards beam-based millimeter Waves or sub-Terahertz communications, which require precise beam pointing for guaranteeing the communication link, especially in high mobility. A key design aspect is a fast and proactive Initial Access (IA) algorithm to select the optimal beam to be used. In this work, we investigate alternative IA techniques to fasten the current fifth-generation (5G) standard, targeting an efficient 6G design. First, we discuss cooperative position-based schemes that rely on the position information. Then, motivated by the intuition of a non-uniform distribution of the communication directions due to road topology constraints, we design two Probabilistic Codebook (PCB) techniques of prioritized beams. In the first one, the PCBs are built leveraging past collected traffic information, while in the second one, we use the Hough Transform over the digital map to extract dominant road directions. We also show that the information coming from the angular probability distribution allows designing non-uniform codebook quantization, reducing the degradation of the performances compared to uniform one. Numerical simulation on realistic scenarios shows that PCBs-based beam selection outperforms the 5G standard in terms of the number of IA trials, with a performance comparable to position-based methods, without requiring the signaling of sensitive information.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Channel Estimation for 6G V2X HybridSystems using Multi-Vehicular Learning
Authors:
Marouan Mizmizi,
Dario Tagliaferri,
Damiano Badini,
Christian Mazzucco,
Umberto Spagnolini
Abstract:
Channel estimation for hybrid Multiple Input Multiple Output (MIMO) systems at Millimeter-Waves (mmW)/sub-THz is a fundamental, despite challenging, prerequisite for an efficient design of hybrid MIMO precoding/combining. Most works propose sequential search algorithms, e.g., Compressive Sensing (CS), that are most suited to static channels and consequently cannot apply to highly dynamic scenarios…
▽ More
Channel estimation for hybrid Multiple Input Multiple Output (MIMO) systems at Millimeter-Waves (mmW)/sub-THz is a fundamental, despite challenging, prerequisite for an efficient design of hybrid MIMO precoding/combining. Most works propose sequential search algorithms, e.g., Compressive Sensing (CS), that are most suited to static channels and consequently cannot apply to highly dynamic scenarios such as Vehicle-to-Everything (V2X). To address the latter ones, we leverage \textit{recurrent vehicle passages} to design a novel Multi Vehicular (MV) hybrid MIMO channel estimation suited for Vehicle-to-Infrastructure (V2I) and Vehicle-to-Network (V2N) systems. Our approach derives the analog precoder/combiner through a MV beam alignment procedure. For the digital precoder/combiner, we adapt the Low-Rank (LR) channel estimation method to learn the position-dependent eigenmodes of the received digital signal (after beamforming), which is used to estimate the compressed channel in the communication phase. Extensive numerical simulations, obtained with ray-tracing channel data and realistic vehicle trajectories, demonstrate the benefits of our solution in terms of both achievable Spectral Efficiency (SE) and Mean Square Error (MSE) compared to the Unconstrained Maximum Likelihood (U-ML) estimate of the compressed digital channel, making it suitable for both 5G and future 6G systems. Most notably, in some scenarios, we obtain the performance of the optimal Fully Digital (FD) systems.
△ Less
Submitted 21 May, 2021; v1 submitted 20 May, 2021;
originally announced May 2021.