-
Site-Specific Radio Channel Representation -- Current State and Future Applications
Authors:
Thomas Zemen,
Jorge Gomez-Ponce,
Aniruddha Chandra,
Michael Walter,
Enes Aksoy,
Ruisi He,
David Matolak,
Minseok Kim,
Jun-ichi Takada,
Sana Salous,
Reinaldo Valenzuela,
Andreas F. Molisch
Abstract:
A site-specific radio channel representation considers the surroundings of the communication system through the environment geometry, such as buildings, vegetation, and mobile objects including their material and surface properties. In this article, we focus on communication technologies for 5G and beyond that are increasingly able to exploit the specific environment geometry for both communicatio…
▽ More
A site-specific radio channel representation considers the surroundings of the communication system through the environment geometry, such as buildings, vegetation, and mobile objects including their material and surface properties. In this article, we focus on communication technologies for 5G and beyond that are increasingly able to exploit the specific environment geometry for both communication and sensing. We present methods for a site-specific radio channel representation that is spatially consistent, such that mobile transmitter and receveiver cause a correlated time-varying channel impulse response. When modelled as random, this channel impulse response has non-stationary statistical properties, i.e., a time-variant Doppler spectrum, power delay profile, K-factor and spatial correlation. A site-specific radio channel representation will enable research into emerging 5G and beyond technologies such as distributed multiple-input multiple-output systems, reconfigurable intelligent surfaces, multi-band communication, and joint communication and sensing. These 5G and beyond technologies will be deployed for a wide range of environments, from dense urban areas to railways, road transportation, industrial automation, and unmanned aerial vehicles.
△ Less
Submitted 18 June, 2024; v1 submitted 13 June, 2024;
originally announced June 2024.
-
Wireless Connectivity and Localization for Advanced Air Mobility Services
Authors:
Priyanka Sinha,
Md Moin Uddin Chowdhury,
Ismail Guvenc,
David W. Matolak,
Kamesh Namuduri
Abstract:
By serving as an analog to traffic signal lights, communication signaling for drone to drone communications holds the key to the success of advanced air mobility (AAM) in both urban and rural settings. Deployment of AAM applications such as air taxis and air ambulances, especially at large-scale, requires a reliable channel for a point-to-point and broadcast communication between two or more aircr…
▽ More
By serving as an analog to traffic signal lights, communication signaling for drone to drone communications holds the key to the success of advanced air mobility (AAM) in both urban and rural settings. Deployment of AAM applications such as air taxis and air ambulances, especially at large-scale, requires a reliable channel for a point-to-point and broadcast communication between two or more aircraft. Achieving such high reliability, in a highly mobile environment, requires communication systems designed for agility and efficiency. This paper presents the foundations for establishing and maintaining a reliable communication channel among multiple aircraft in unique AAM settings. Subsequently, it presents concepts and results on wireless coverage and mobility for AAM services using cellular networks as a ground network infrastructure. Finally, we analyze the wireless localization performance at 3D AAM corridors when cellular networks are utilized, considering different corridor heights and base station densities. We highlight future research directions and open problems to improve wireless coverage and localization throughout the manuscript.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Noncoherent Multiuser Chirp Spread Spectrum: Performance with Doppler and Asynchronism
Authors:
Nozhan Hosseini,
David W. Matolak
Abstract:
In this paper, we investigate multi user chirp spread spectrum with noncoherent detection as a continuation of our work on coherent detection in [1]. We derive the analytical bit error ratio (BER) expression for binary chirp spread spectrum (BCSS) in the presence of multiple access interference (MAI) caused by correlation with other user signals because of either asynchronism or Doppler shifts, or…
▽ More
In this paper, we investigate multi user chirp spread spectrum with noncoherent detection as a continuation of our work on coherent detection in [1]. We derive the analytical bit error ratio (BER) expression for binary chirp spread spectrum (BCSS) in the presence of multiple access interference (MAI) caused by correlation with other user signals because of either asynchronism or Doppler shifts, or both, and validate with simulations. To achieve this we analyze the signal cross correlations, and compare traditional linear chirps with our recently-proposed nonlinear chirps introduced in [1] and with other nonlinear chirps from the literature. In doing so we illustrate the superior performance of our new nonlinear chirp designs in these practical conditions, for the noncoherent counterpart of [1].
△ Less
Submitted 12 November, 2020;
originally announced November 2020.
-
EMR: A New Metric to Assess the Resilience of Directional mmWave Channels to Blockages
Authors:
Fatih Erden,
Ozgur Ozdemir,
Ismail Guvenc,
David W. Matolak
Abstract:
Millimeter-wave (mmWave) communication systems require narrow beams to increase communication range. If the dominant communication direction is blocked by an obstacle, an alternative and reliable spatial communication path should be quickly identified to maintain connectivity. In this paper, we introduce a new metric to quantify the effective multipath richness (EMR) of a directional communication…
▽ More
Millimeter-wave (mmWave) communication systems require narrow beams to increase communication range. If the dominant communication direction is blocked by an obstacle, an alternative and reliable spatial communication path should be quickly identified to maintain connectivity. In this paper, we introduce a new metric to quantify the effective multipath richness (EMR) of a directional communication channel by considering the strength and spatial diversity of the resolved paths, while also taking into account beamwidth and blockage characteristics. The metric is defined as a weighted sum of the number of multipath component (MPC) clusters, where clustering is performed based on the cosine-distance between the MPCs that have power above a certain threshold. This process returns a single scalar value for a transmitter (TX)/receiver (RX) location pair in a given environment. It is also possible to represent the EMR of the whole environment with a probability distribution function of the metric by considering a set of TX/RX locations. Using this proposed metric, one can assess the scattering richness of different communication environments to achieve a particular quality of service (QoS). This metric is especially informative and useful at higher frequencies, such as mmWave and terahertz (THz), where the propagation path loss and penetration loss are high, and directional non-light-of-sight (NLOS) communication is critical for the success of the network. We evaluate the proposed metric using our channel measurements at 28 GHz in a large indoor environment at a library setting for LOS and NLOS scenarios.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
DFT-spread-OFDM Based Chirp Transmission
Authors:
Alphan Sahin,
Nozhan Hosseini,
Hosseinali Jamal,
Safi Shams Muhtasimul Hoque,
David W. Matolak
Abstract:
In this study, we propose a framework for chirp-based communications by exploiting discrete Fourier transform-spread orthogonal frequency division multiplexing (DFT-s-OFDM). We show that a well-designed frequency-domain spectral sha** (FDSS) filter for DFT-s-OFDM can convert its single-carrier nature to a linear combination of chirps circularly translated in the time domain. Also, by exploiting…
▽ More
In this study, we propose a framework for chirp-based communications by exploiting discrete Fourier transform-spread orthogonal frequency division multiplexing (DFT-s-OFDM). We show that a well-designed frequency-domain spectral sha** (FDSS) filter for DFT-s-OFDM can convert its single-carrier nature to a linear combination of chirps circularly translated in the time domain. Also, by exploiting the properties of the Fourier series and Bessel function of the first kind, we analytically obtain the FDSS filter for an arbitrary chirp. We theoretically show that the chirps with low ripples in the frequency domain result in a lower bit-error ratio (BER) via less noise enhancement. We also address the noise enhancement by exploiting the repetitions in the frequency. The proposed framework offers a new way to efficiently synthesize chirps that can be used in Internet-of-Things (IoT), dual-function radar and communication (DFRC) or wireless sensing applications with existing DFT-s-OFDM transceivers.
△ Less
Submitted 21 November, 2020; v1 submitted 9 August, 2020;
originally announced August 2020.
-
Multicarrier Spectral Sha** for Non-White Interference Channels: Application to L-band Aviation Channels
Authors:
Hosseinali Jamal,
David W. Matolak
Abstract:
In this paper, we investigate an algorithm to attain additive white Gaussian noise (AWGN) performance in spectrally non-white channels, using multicarrier communications, i.e., orthogonal frequency division multiplexing (OFDM) and filterbank multicarrier (FBMC). The non-white channel can be from non-white noise, or more commonly, interference. Our algorithm uses a simple optimization method to fin…
▽ More
In this paper, we investigate an algorithm to attain additive white Gaussian noise (AWGN) performance in spectrally non-white channels, using multicarrier communications, i.e., orthogonal frequency division multiplexing (OFDM) and filterbank multicarrier (FBMC). The non-white channel can be from non-white noise, or more commonly, interference. Our algorithm uses a simple optimization method to find usable subcarriers and assigns different power levels to the subcarriers to attain the equivalent AWGN channel bit error ratio (BER). Subcarriers that experience very high interference are assigned as null subcarriers. After describing our analysis, we show results for two non-white interference signal examples: the Gaussian pulse shaped distance measuring equipment (DME) pulses, and a classical rectangular-pulse interference signal. The DME example is pertinent for currently proposed aviation communication systems, where new multicarrier techniques, e.g., the L-band digital aviation communication systems (LDACS) have been designed as an inlay approach between the high-power DME channels in the L-band. Our results show how using this adaptive technique can improve performance and spectral efficiency, whereas fixed bandwidth schemes such as LDACS could suffer significant performance degradation. These results show the utility of this idea for future adaptive and cognitive radio applications for aviation or other non-white channels.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Advanced Physical-Layer Technologies in VHF Data Link Communications
Authors:
Hosseinali Jamal,
David W. Matolak
Abstract:
Due to the rapidly increasing number of flights and high usage of VHF channels, the VHF spectrum is becoming much more crowded, and use of analog waveforms will likely not maintain the required performance. Therefore, digital communications have been considered due to larger spectral efficiency. Notably, VHF data link modes 2 and 3 (VDL2 and 3) using D8PSK modulation has been proposed. VDL2 and 3…
▽ More
Due to the rapidly increasing number of flights and high usage of VHF channels, the VHF spectrum is becoming much more crowded, and use of analog waveforms will likely not maintain the required performance. Therefore, digital communications have been considered due to larger spectral efficiency. Notably, VHF data link modes 2 and 3 (VDL2 and 3) using D8PSK modulation has been proposed. VDL2 and 3 received attention due to its simplicity and more constant amplitude waveform, yielding lower PAPR. Recently, advanced VHF digital link (A-VDL) was proposed for VHF. This scheme enables use of essentially the same platform as VDL except for the physical layer processing, including modulation. The proposed A-VDL, following DVB-S2 standard, uses APSK modulation with higher modulation order than VDL, hence providing higher spectral efficiency than VDL. Compared to the widely used QAM, APSK is more resistant to amplifier amplitude and phase distortions. Thus, APSK has become of interest for satellite communications, as well as VHF communications in A-VDL. In this paper, we investigate other advanced technologies such as channel encoding technique low-density parity-check (LDPC), more efficient standardized voice encoders, as well as better pulse sha** filters than the classical square-root raised-cosine filter used in VDL and A-VDL. Via simulations and analysis, we compare the proposed scheme's link margin, PAPR, and spectral efficiency compared to VDL and A-VDL, which both use Reed Solomon (RS) encoding. In addition, as another way of generating the same VDL waveforms (or possibly other single-carrier aeronautical band waveforms), we investigate the single-carrier type waveform used in cellular LTE and 5G uplink communication links, the discrete Fourier transform-spread OFDM (DFT-s-OFDM), and discuss how we can take advantage of using the same LTE and 5G hardware resources.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Attenuation of Several Common Building Materials in Millimeter-Wave Frequency Bands: 28, 73 and 91 GHz
Authors:
Nozhan Hosseini,
Mahfuza Khatun,
Changyu Guo,
Kairui Du,
Ozgur Ozdemir,
David W. Matolak,
Ismail Guvenc,
Hani Mehrpouyan
Abstract:
Future cellular systems will make use of millimeter wave (mmWave) frequency bands. Many users in these bands are located indoors, i.e., inside buildings, homes, and offices. Typical building material attenuations in these high frequency ranges are of interest for link budget calculations. In this paper, we report on a collaborative measurement campaign to find the attenuation of several typical bu…
▽ More
Future cellular systems will make use of millimeter wave (mmWave) frequency bands. Many users in these bands are located indoors, i.e., inside buildings, homes, and offices. Typical building material attenuations in these high frequency ranges are of interest for link budget calculations. In this paper, we report on a collaborative measurement campaign to find the attenuation of several typical building materials in three potential mmWave bands (28, 73, 91 GHz). Using directional antennas, we took multiple measurements at multiple locations using narrow-band and wide-band signals, and averaged out residual small-scale fading effects. Materials include clear glass, drywall (plasterboard), plywood, acoustic ceiling tile, and cinder blocks. Specific attenuations range from approximately 0.5 dB/cm for ceiling tile at 28 GHz to approximately 19 dB/cm for clear glass at 91 GHz.
△ Less
Submitted 26 April, 2020;
originally announced April 2020.
-
Requirements and Technologies Towards UAM: Communication, Navigation, and Surveillance
Authors:
M. Cenk Erturk,
Nozhan Hosseini,
Hosseinali Jamal,
Alphan Sahin,
David Matolak,
Jamal Haque
Abstract:
Urban air mobility (UAM) is a concept for creating an airborne transportation system that operates in urban settings with an on-board pilot and/or remote pilot in command (RPIC), or with a fully autonomous architecture. Although the passenger traffic will be mostly in and near urban environments, UAM is also being considered for air cargo, perhaps between cities. Such capability is pushing the cur…
▽ More
Urban air mobility (UAM) is a concept for creating an airborne transportation system that operates in urban settings with an on-board pilot and/or remote pilot in command (RPIC), or with a fully autonomous architecture. Although the passenger traffic will be mostly in and near urban environments, UAM is also being considered for air cargo, perhaps between cities. Such capability is pushing the current communication, navigation and surveillance (CNS) / air traffic management (ATM) systems that were not designed to support these types of aviation scenarios. The UAM aircraft will be operating in a congested environment, where CNS and ATM systems need to provide integrity, robustness, security, and very high availability for safety of UAM operations while evolving. As UAM is under research by academia and government agencies, the industry is driving technology towards aircraft prototypes. Critical UAM requirements are derived from command and control (C2) (particularly for RPIC scenario), data connectivity for passengers and flight systems, unmanned aircraft systems (UAS) to UAS communication to avoid collision, and data exchange for positioning and surveillance. In this paper, we study connectivity challenges and present requirements towards a robust UAM architecture through its concept of operations. In addition, we review the existing/potential CNS technologies towards UAM, i.e., 3rd generation partnership project (3GPP) fifth generation (5G) new radio (NR), navigation detect & avoid (DAA), and satellite systems and present conclusions on a future road-map for UAM CNS architecture.
△ Less
Submitted 26 April, 2020;
originally announced April 2020.
-
Golay Layer: Limiting Peak-to-Average Power Ratio for OFDM-based Autoencoders
Authors:
Alphan Sahin,
David W. Matolak
Abstract:
In this study, we propose a differentiable layer for OFDM-based autoencoders (OFDM-AEs) to avoid high instantaneous power without regularizing the cost function used during the training. The proposed approach relies on the manipulation of the parameters of a set of functions that yield complementary sequences (CSs) through a deep neural network (DNN). We guarantee the peak-to-average-power ratio (…
▽ More
In this study, we propose a differentiable layer for OFDM-based autoencoders (OFDM-AEs) to avoid high instantaneous power without regularizing the cost function used during the training. The proposed approach relies on the manipulation of the parameters of a set of functions that yield complementary sequences (CSs) through a deep neural network (DNN). We guarantee the peak-to-average-power ratio (PAPR) of each OFDM-AE symbol to be less than or equal to 3 dB. We also show how to normalize the mean power by using the functions in addition to PAPR. The introduced layer admits auxiliary parameters that allow one to control the amplitude and phase deviations in the frequency domain. Numerical results show that DNNs at the transmitter and receiver can achieve reliable communications under this protection layer at the expense of complexity.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Nonlinear Quasi-Synchronous Multi User Chirp Spread Spectrum Signaling
Authors:
Nozhan Hosseini,
David W. Matolak
Abstract:
Multi user orthogonal chirp spread spectrum (OCSS) can improve the spectral inefficiency of chirp spread spectrum (CSS) but is only feasible with perfect synchronism and without any channel dispersion. Asynchronism, channel dispersion, or unexpectedly large Doppler shifts can cause multiple access interference (MAI), which degrades performance. Conditions with small timing offsets we term quasi-sy…
▽ More
Multi user orthogonal chirp spread spectrum (OCSS) can improve the spectral inefficiency of chirp spread spectrum (CSS) but is only feasible with perfect synchronism and without any channel dispersion. Asynchronism, channel dispersion, or unexpectedly large Doppler shifts can cause multiple access interference (MAI), which degrades performance. Conditions with small timing offsets we term quasi-synchronous (QS). In this paper, we propose two new sets of nonlinear chirps to improve CSS system performance in QS conditions. We analytically and numerically evaluate cross-correlation distributions. We also derive the bit error probability for Binary CSS analytically and validate our theoretical result with both numerical and simulation results; our error probability expression is applicable to any binary time-frequency (TF) chirp waveform. Finally, we show that in QS conditions our two new nonlinear chirp designs outperform the classical linear chirp and all existing nonlinear chirps from the literature. To complete our analysis, we demonstrate that our nonlinear CSS designs outperform existing chirps in two realistic (empirically modeled) dispersive air to ground channels.
△ Less
Submitted 8 October, 2020; v1 submitted 21 September, 2019;
originally announced September 2019.
-
Chirp Spread Spectrum Signaling for Future Air-Ground Communications
Authors:
Nozhan Hosseini,
David W. Matolak
Abstract:
In this paper, we investigate the use of chirp spread spectrum signaling over air-ground channels. This includes evaluation of not only the traditional linear chirp, but also of a new chirp signal format we have devised for multiple access applications. This new format is more practical than prior multi-user chirp systems in the literature, because we allow for imperfect synchronism. Specifically…
▽ More
In this paper, we investigate the use of chirp spread spectrum signaling over air-ground channels. This includes evaluation of not only the traditional linear chirp, but also of a new chirp signal format we have devised for multiple access applications. This new format is more practical than prior multi-user chirp systems in the literature, because we allow for imperfect synchronism. Specifically we evaluate multi-user chirp signaling over air-ground channels in a quasi-synchronous condition. The air-ground channels we employ are models based upon an extensive NASA measurement campaign. We show that our new signaling scheme outperforms the classic linear chirp in these air-ground settings.
△ Less
Submitted 6 March, 2020; v1 submitted 9 September, 2019;
originally announced September 2019.
-
Indoor and Outdoor Penetration Loss Measurements at 73 and 81 GHz
Authors:
Mahfuza Khatun,
Changyu Guo,
David Matolak,
Hani Mehrpouyan
Abstract:
In this paper, we present millimeter-wave (mmWave) penetration loss measurements and analysis at E-bands-73 GHz and 81 GHz. Penetration loss was measured for common building materials such as clear glass, metal, tinted glass, wood, and drywall on the campus of Boise State University in the city of Boise. A horn antenna with a gain of 24 dBi was used at the transmitter and receiver at both bands, a…
▽ More
In this paper, we present millimeter-wave (mmWave) penetration loss measurements and analysis at E-bands-73 GHz and 81 GHz. Penetration loss was measured for common building materials such as clear glass, metal, tinted glass, wood, and drywall on the campus of Boise State University in the city of Boise. A horn antenna with a gain of 24 dBi was used at the transmitter and receiver at both bands, and both antennas were boresight-aligned with respect to the test material. A total of twelve locations were selected to test five materials. We tested two indoor materials (clear glass and wood) in at least two locations to determine the effect of penetration loss of materials in similar compositions. The average penetration loss and standard deviation were estimated for these indoor materials. We measured an average penetration loss of 2 to 9 dB for wood and glass, respectively. Furthermore, we measured the penetration loss of common indoor and outdoor building materials. We studied that outdoor materials had larger penetration losses, e.g., we obtained a penetration loss of 22.69 dB for outdoor metal, where this value dropped to 16.04 dB for indoor metal at 73 GHz. Similar results were also obtained for the 81 GHz channel, where the largest penetration loss was measured to be 26.5 dB through a tinted glass door in an outdoor setting.
△ Less
Submitted 31 July, 2019;
originally announced August 2019.
-
Millimeter-Wave Path Loss at 73 GHz in Indoor and Outdoor Airport Environments
Authors:
Mahfuza Khatun,
Changyu Guo,
Letizia Moro,
David Matolak,
Hani Mehrpouyan
Abstract:
In this paper, two large-scale fading path loss models are presented based on indoor and outdoor channel measurements at 73 GHz. The line-of-sight millimeter-wave propagation measurement campaigns were uniquely conducted within the indoor and outdoor environments at an airport setting, i.e., the Boise Airport. The channel measurements were made with directional transmit and receive antennas with a…
▽ More
In this paper, two large-scale fading path loss models are presented based on indoor and outdoor channel measurements at 73 GHz. The line-of-sight millimeter-wave propagation measurement campaigns were uniquely conducted within the indoor and outdoor environments at an airport setting, i.e., the Boise Airport. The channel measurements were made with directional transmit and receive antennas with a 24 dBi gain at different receive antenna heights. From the measured data, we obtained the parameters of two path loss models, i.e., the close-in reference distance model (CIM) and the floating-intercept model (FIM). Results show that the path loss exponents estimated from the CIM are very close to that of the free-space path loss model, while the FIM provides a better fit to the measurement data.
△ Less
Submitted 25 June, 2019;
originally announced June 2019.
-
Ultra-Wideband Air-to-Ground Propagation Channel Characterization in an Open Area
Authors:
Wahab Ali Gulzar Khawaja,
Ozgur Ozdemir,
Fatih Erden,
Ismail Guvenc,
David Matolak
Abstract:
This paper studies the air-to-ground (AG) ultra-wideband (UWB) propagation channel through measurements between 3.1 GHz to 4.8 GHz using unmanned-aerial-vehicles (UAVs). Different line-of-sight (LOS) and obstructed- LOS scenarios and two antenna orientations were used in the experiments. Channel statistics for different propagation scenarios were obtained, and the Saleh-Valenzuela (SV) model was f…
▽ More
This paper studies the air-to-ground (AG) ultra-wideband (UWB) propagation channel through measurements between 3.1 GHz to 4.8 GHz using unmanned-aerial-vehicles (UAVs). Different line-of-sight (LOS) and obstructed- LOS scenarios and two antenna orientations were used in the experiments. Channel statistics for different propagation scenarios were obtained, and the Saleh-Valenzuela (SV) model was found to provide a good fit for the statistical channel model. An analytical path loss model based on antenna gains in the elevation plane is provided for unobstructed UAV hovering and moving (in a circular path) propagation scenarios.
△ Less
Submitted 6 June, 2019;
originally announced June 2019.
-
UWB Air-to-Ground Propagation Channel Measurements and Modeling using UAVs
Authors:
Wahab Khawaja,
Ozgur Ozdemir,
Fatih Erden,
Ismail Guvenc,
David Matolak
Abstract:
This paper presents an experimental study of the air-to-ground (AG) propagation channel through ultrawideband(UWB) measurements in an open area using unmanned-aerial-vehicles (UAVs). Measurements were performed using UWB radios operating at a frequency range of 3.1 GHz - 4.8 GHz and UWB planar elliptical dipole antennas having an omni-directional pattern in the azimuth plane and typical donut shap…
▽ More
This paper presents an experimental study of the air-to-ground (AG) propagation channel through ultrawideband(UWB) measurements in an open area using unmanned-aerial-vehicles (UAVs). Measurements were performed using UWB radios operating at a frequency range of 3.1 GHz - 4.8 GHz and UWB planar elliptical dipole antennas having an omni-directional pattern in the azimuth plane and typical donut shaped pattern in the elevation plane. Three scenarios were considered for the channel measurements: (i)two receivers (RXs) at different heights above the ground and placed close to each other in line-of-sight (LOS) with the transmitter (TX) on the UAV and the UAV is hovering; (ii) RXs are in obstructed line-of-sight (OLOS) with the UAV TX due to foliage, and the UAV is hovering; and, (iii) UAV is moving in a circular path. Different horizontal and vertical distances between the RXs and TX were used in the measurements. In addition, two different antenna orientations were used on the UAV antennas (vertical and horizontal) to analyze the effects of antenna radiation patterns on the UWB AG propagation. From the empirical results, it was observed that the received power depends mainly on the antenna radiation pattern in the elevation plane when the antennas are oriented in the same direction, as expected for these omni-azimuth antennas. Moreover, the overall antenna gain at the TX and RX can be approximated using trigonometric functions of the elevation angle.
△ Less
Submitted 16 December, 2018;
originally announced December 2018.
-
UAV Command and Control, Navigation and Surveillance: A Review of Potential 5G and Satellite Systems
Authors:
Nozhan Hosseini,
Hosseinali Jamal,
David W. Matolak,
Jamal Haque,
Thomas Magesacher
Abstract:
Drones, unmanned aerial vehicles (UAVs), or unmanned aerial systems (UAS) are expected to be an important component of 5G/beyond 5G (B5G) communications. This includes their use within cellular architectures (5G UAVs), in which they can facilitate both wireless broadcast and point-to-point transmissions, usually using small UAS (sUAS). Allowing UAS to operate within airspace along with commercial,…
▽ More
Drones, unmanned aerial vehicles (UAVs), or unmanned aerial systems (UAS) are expected to be an important component of 5G/beyond 5G (B5G) communications. This includes their use within cellular architectures (5G UAVs), in which they can facilitate both wireless broadcast and point-to-point transmissions, usually using small UAS (sUAS). Allowing UAS to operate within airspace along with commercial, cargo, and other piloted aircraft will likely require dedicated and protected aviation spectrum at least in the near term, while regulatory authorities adapt to their use. The command and control (C2), or control and non-payload communications (CNPC) link provides safety critical information for the control of the UAV both in terrestrial-based line of sight (LOS) conditions and in satellite communication links for so-called beyond LOS (BLOS) conditions. In this paper, we provide an overview of these CNPC links as they may be used in 5G and satellite systems by describing basic concepts and challenges. We review new entrant technologies that might be used for UAV C2 as well as for payload communication, such as millimeter wave (mmWave) systems, and also review navigation and surveillance challenges. A brief discussion of UAV-to-UAV communication and hardware issues are also provided.
△ Less
Submitted 16 April, 2020; v1 submitted 6 December, 2018;
originally announced December 2018.
-
Dual-Polarization OFDM-OQAM Wireless Communication System
Authors:
Hosseinali Jamal,
David W. Matolak
Abstract:
In this paper we describe the overall idea and results of a recently proposed radio access technique based on filter bank multicarrier (FBMC) communication system using two orthogonal polarizations: dual-polarization FBMC (DP-FBMC). Using this system we can alleviate the intrinsic interference problem in FBMC systems. This enables use of all the multicarrier techniques used in cyclic-prefix orthog…
▽ More
In this paper we describe the overall idea and results of a recently proposed radio access technique based on filter bank multicarrier (FBMC) communication system using two orthogonal polarizations: dual-polarization FBMC (DP-FBMC). Using this system we can alleviate the intrinsic interference problem in FBMC systems. This enables use of all the multicarrier techniques used in cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM) systems for channel equalization, multiple-input/multiple-output (MIMO) processing, etc., without using the extra processing required for conventional FBMC. DP-FBMC also provides other interesting advantages over CP-OFDM and FBMC such as more robustness in multipath fading channels, and more robustness to receiver carrier frequency offset (CFO) and timing offset (TO). For DP-FBMC we propose three different structures based on different multiplexing techniques in time, frequency, and polarization. We will show that one of these structures has exactly the same system complexity and equipment as conventional FBMC. In our simulation results DP-FBMC has better bit error ratio (BER) performance in dispersive channels. Based on these results, DP-FBMC has potential as a promising candidate for future wireless communication systems.
△ Less
Submitted 30 June, 2018; v1 submitted 13 June, 2018;
originally announced June 2018.
-
Joint Power Allocation in Interference-Limited Networks via Distributed Coordinated Learning
Authors:
Roohollah Amiri,
Hani Mehrpouyan,
David Matolak,
Maged Elkashlan
Abstract:
The deployment of ultra-dense networks is one of the main methods to meet the 5G data rate requirements. However, high density of independent small base stations (SBSs) will increase the interference within the network. To circumvent this interference, there is a need to develop self-organizing methods to manage the resources of the network. In this paper, we present a distributed power allocation…
▽ More
The deployment of ultra-dense networks is one of the main methods to meet the 5G data rate requirements. However, high density of independent small base stations (SBSs) will increase the interference within the network. To circumvent this interference, there is a need to develop self-organizing methods to manage the resources of the network. In this paper, we present a distributed power allocation algorithm based on multi-agent Q-learning in an interference-limited network. The proposed method leverages coordination through simple message passing between SBSs to achieve an optimal joint power allocation. Simulation results show the optimality of the proposed method for a two-user case.
△ Less
Submitted 23 December, 2018; v1 submitted 6 June, 2018;
originally announced June 2018.
-
UWB Channel Sounding and Modeling for UAV Air-to-Ground Propagation Channels
Authors:
Wahab Khawaja,
Ismail Guvenc,
David Matolak
Abstract:
Unmanned aerial vehicles (UAVs) are expected to be used extensively in the near future in applications such as aerial surveillance, transportation, and disaster assistance. The conditions under which UAVs operate are different from those of conventional piloted aircrafts. This necessitates development of new air-to-ground (AG) propagation channel models for UAVs. To our best knowledge, there are l…
▽ More
Unmanned aerial vehicles (UAVs) are expected to be used extensively in the near future in applications such as aerial surveillance, transportation, and disaster assistance. The conditions under which UAVs operate are different from those of conventional piloted aircrafts. This necessitates development of new air-to-ground (AG) propagation channel models for UAVs. To our best knowledge, there are limited studies in the literature on sounding and modeling of ultrawideband (UWB) AG propagation channels. In this work, comprehensive UWB measurements are conducted for various UAV communication scenarios using Time Domain P410 UWB kits. Both time and frequency domain analysis of the measured data are carried out. Based on the measured data, stochastic path loss and multipath channel models are developed to characterize AG UWB propagation channels.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
PAPR Analysis for Dual-Polarization FBMC
Authors:
Hosseinali Jamal,
David W. Matolak
Abstract:
In a recent work we proposed a new radio access technique based on filter bank multi-carrier (FBMC) modulation using two orthogonal polarizations: dual-polarization FBMC (DP-FBMC). We showed that with good cross-polarization discrimination (XPD), DP-FBMC solves the intrinsic imaginary interference shortcoming of FBMC without extra processing. DP-FBMC also has other interesting advantages over cycl…
▽ More
In a recent work we proposed a new radio access technique based on filter bank multi-carrier (FBMC) modulation using two orthogonal polarizations: dual-polarization FBMC (DP-FBMC). We showed that with good cross-polarization discrimination (XPD), DP-FBMC solves the intrinsic imaginary interference shortcoming of FBMC without extra processing. DP-FBMC also has other interesting advantages over cyclic prefix orthogonal frequency-division multiplexing (CP-OFDM) and FBMC such as more robustness in dispersive channels, and it is also more robust to receiver carrier frequency offset (CFO) and timing offset (TO). In this paper we analyze the peak to average power ratio (PAPR) of DP-FBMC and compare PAPR simulation results with that of conventional FBMC, for different prototype filters and overlap** factors. According to the analysis and results, with a proper choice of prototype filter, DP-FBMC has comparable PAPR to FBMC.
△ Less
Submitted 17 January, 2019; v1 submitted 14 May, 2018;
originally announced May 2018.
-
Dual-Polarization FBMC for Improved Performance in Wireless Communication Systems
Authors:
Hosseinali Jamal,
David W. Matolak
Abstract:
Filter bank multi-carrier (FBMC) offers superior spectral properties compared to cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM), at the cost of an inherent shortcoming in dispersive channels called intrinsic imaginary interference. In this paper we propose a new FBMC based communication system using two orthogonal polarizations for wireless communication systems: dual-polarizat…
▽ More
Filter bank multi-carrier (FBMC) offers superior spectral properties compared to cyclic-prefix orthogonal frequency-division multiplexing (CP-OFDM), at the cost of an inherent shortcoming in dispersive channels called intrinsic imaginary interference. In this paper we propose a new FBMC based communication system using two orthogonal polarizations for wireless communication systems: dual-polarization FBMC (DP-FBMC). Using this system we can significantly suppress the FBMC intrinsic interference. Therefore in DP-FBMC all the multicarrier techniques used in CP-OFDM systems such as channel equalization, etc., should be applicable without using the complex processing methods required for conventional FBMC. DP-FBMC also has other interesting advantages over CP-OFDM and FBMC: it is more robust in highly dispersive channels, and also to receiver carrier frequency offset (CFO) and timing offset (TO). In our DP-FBMC system we propose three different structures based on different multiplexing techniques. We show that compared to conventional FBMC, one of these DP-FBMC structures has equivalent complexity and equipment requirements. We compare DP-FBMC with other systems through simulations. According to our results DP-FBMC has potential as a promising candidate for future wireless communication networks.
△ Less
Submitted 17 August, 2018; v1 submitted 7 May, 2018;
originally announced May 2018.
-
A Survey of Air-to-Ground Propagation Channel Modeling for Unmanned Aerial Vehicles
Authors:
Wahab Khawaja,
Ismail Guvenc,
David Matolak,
Uwe-Carsten Fiebig,
Nicolas Schneckenberger
Abstract:
In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envis…
▽ More
In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail when compared to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios.
△ Less
Submitted 5 January, 2018;
originally announced January 2018.