-
Waveform Learning under Phase Noise Impairment for Sub-THz Communications
Authors:
Dileepa Marasinghe,
Le Hang Nguyen,
Jafar Mohammadi,
Yejian Chen,
Thorsten Wild,
Nandana Rajatheva
Abstract:
The large untapped spectrum in sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. Phase noise (PN) is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the modest output power of the power amplifier demands limits on peak to average power ratio (PAPR) signal design. In this work, w…
▽ More
The large untapped spectrum in sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. Phase noise (PN) is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the modest output power of the power amplifier demands limits on peak to average power ratio (PAPR) signal design. In this work, we design a PN-robust, low PAPR single-carrier (SC) waveform by geometrically sha** the constellation and adapting the pulse sha** filter pair under practical PN modeling and adjacent channel leakage ratio (ACLR) constraints for a given excess bandwidth. We optimize the waveforms under conventional and state-of-the-art PN-aware demappers. Moreover, we introduce a neural-network (NN) demapper enhancing transceiver adaptability. We formulate the waveform optimization problem in its augmented Lagrangian form and use a back-propagation-inspired technique to obtain a design that is numerically robust to PN, while adhering to PAPR and ACLR constraints. The results substantiate the efficacy of the method, yielding up to 2.5 dB in the required Eb/N0 under stronger PN along with a PAPR reduction of 0.5 dB. Moreover, PAPR reductions up to 1.2 dB are possible with competitive BLER and SE performance in both low and high PN conditions.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Constellation Sha** under Phase Noise Impairment for Sub-THz Communications
Authors:
Dileepa Marasinghe,
Le Hang Nguyen,
Jafar Mohammadi,
Yejian Chen,
Thorsten Wild,
Nandana Rajatheva
Abstract:
The large untapped spectrum in the sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. One of the challenges in radio communications in sub-THz is the hardware impairments. Specifically, phase noise is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the moderate output power of th…
▽ More
The large untapped spectrum in the sub-THz allows for ultra-high throughput communication to realize many seemingly impossible applications in 6G. One of the challenges in radio communications in sub-THz is the hardware impairments. Specifically, phase noise is one key hardware impairment, which is accentuated as we increase the frequency and bandwidth. Furthermore, the moderate output power of the sub-THz power amplifier demands limits on peak to average power ratio (PAPR) signal design. Single carrier frequency domain equalization (SC-FDE) has been identified as a suitable candidate for sub-THz, although some challenges such as phase noise and PAPR still remain to be tackled. In this work, we design a phase noise robust, modest PAPR SC waveform by geometrically sha** the constellation under practical conditions. We formulate the waveform optimization problem in its augmented Lagrangian form and use a back-propagation-inspired technique to obtain a constellation design that is numerically robust to phase noise, while maintaining a relatively low PAPR compared to the conventional waveforms.
△ Less
Submitted 21 March, 2024; v1 submitted 21 November, 2023;
originally announced November 2023.
-
Vision Transformer with Convolutional Encoder-Decoder for Hand Gesture Recognition using 24 GHz Doppler Radar
Authors:
Kavinda Kehelella,
Gayangana Leelarathne,
Dhanuka Marasinghe,
Nisal Kariyawasam,
Viduneth Ariyarathna,
Arjuna Madanayake,
Ranga Rodrigo,
Chamira U. S. Edussooriya
Abstract:
Transformers combined with convolutional encoders have been recently used for hand gesture recognition (HGR) using micro-Doppler signatures. We propose a vision-transformer-based architecture for HGR with multi-antenna continuous-wave Doppler radar receivers. The proposed architecture consists of three modules: a convolutional encoderdecoder, an attention module with three transformer layers, and…
▽ More
Transformers combined with convolutional encoders have been recently used for hand gesture recognition (HGR) using micro-Doppler signatures. We propose a vision-transformer-based architecture for HGR with multi-antenna continuous-wave Doppler radar receivers. The proposed architecture consists of three modules: a convolutional encoderdecoder, an attention module with three transformer layers, and a multi-layer perceptron. The novel convolutional decoder helps to feed patches with larger sizes to the attention module for improved feature extraction. Experimental results obtained with a dataset corresponding to a two-antenna continuous-wave Doppler radar receiver operating at 24 GHz (published by Skaria et al.) confirm that the proposed architecture achieves an accuracy of 98.3% which substantially surpasses the state-of-the-art on the used dataset.
△ Less
Submitted 12 September, 2022;
originally announced September 2022.
-
LiDAR Aided Human Blockage Prediction for 6G
Authors:
Dileepa Marasinghe,
Nandana Rajatheva,
Matti Latva-aho
Abstract:
Leveraging higher frequencies up to THz band paves the way towards a faster network in the next generation of wireless communications. However, such shorter wavelengths are susceptible to higher scattering and path loss forcing the link to depend predominantly on the line-of-sight (LOS) path. Dynamic movement of humans has been identified as a major source of blockages to such LOS links. In this w…
▽ More
Leveraging higher frequencies up to THz band paves the way towards a faster network in the next generation of wireless communications. However, such shorter wavelengths are susceptible to higher scattering and path loss forcing the link to depend predominantly on the line-of-sight (LOS) path. Dynamic movement of humans has been identified as a major source of blockages to such LOS links. In this work, we aim to overcome this challenge by predicting human blockages to the LOS link enabling the transmitter to anticipate the blockage and act intelligently. We propose an end-to-end system of infrastructure-mounted LiDAR sensors to capture the dynamics of the communication environment visually, process the data with deep learning and ray casting techniques to predict future blockages. Experiments indicate that the system achieves an accuracy of 87% predicting the upcoming blockages while maintaining a precision of 78% and a recall of 79% for a window of 300 ms.
△ Less
Submitted 1 October, 2021;
originally announced October 2021.
-
Elevated LiDAR based Sensing for 6G -- 3D Maps with cm Level Accuracy
Authors:
Madhushanka Padmal,
Dileepa Marasinghe,
Vijitha Isuru,
Nalin Jayaweera,
Samad Ali,
Nandana Rajatheva
Abstract:
One key vertical application that will be enabled by 6G is the automation of the processes with the increased use of robots. As a result, sensing and localization of the surrounding environment becomes a crucial factor for these robots to operate. Light detection and ranging (LiDAR) has emerged as an appropriate method of sensing due to its capability of generating detail-rich information with hig…
▽ More
One key vertical application that will be enabled by 6G is the automation of the processes with the increased use of robots. As a result, sensing and localization of the surrounding environment becomes a crucial factor for these robots to operate. Light detection and ranging (LiDAR) has emerged as an appropriate method of sensing due to its capability of generating detail-rich information with high accuracy. However, LiDARs are power hungry devices that generate a lot of data, and these characteristics limit their use as on-board sensors in robots. In this paper, we present a novel approach on the methodology of generating an enhanced 3D map with improved field-of-view using multiple LiDAR sensors. We utilize an inherent property of LiDAR point clouds; rings and data from the inertial measurement unit (IMU) embedded in the sensor for registration of the point clouds. The generated 3D map has an accuracy of 10 cm when compared to the real-world measurements. We also carry out the practical implementation of the proposed method using two LiDAR sensors. Furthermore, we develop an application to utilize the generated map where a robot navigates through the mapped environment with minimal support from the sensors on-board. The LiDARs are fixed in the infrastructure at elevated positions. Thus this is applicable to vehicular and factory scenarios. Our results further validate the idea of using multiple elevated LiDARs as a part of the infrastructure for various applications.
△ Less
Submitted 22 February, 2021;
originally announced February 2021.
-
Factory Automation: Resource Allocation of an Elevated LiDAR System with URLLC Requirements
Authors:
Nalin Jayaweera,
Dileepa Marasinghe,
Nandana Rajatheva,
Matti Latva-aho
Abstract:
Ultra-reliable and low-latency communications (URLLC) play a vital role in factory automation. To share the situational awareness data collected from the infrastructure as raw or processed data, the system should guarantee the URLLC capability since this is a safety-critical application. In this work, the resource allocation problem for an infrastructure-based communication architecture (Elevated…
▽ More
Ultra-reliable and low-latency communications (URLLC) play a vital role in factory automation. To share the situational awareness data collected from the infrastructure as raw or processed data, the system should guarantee the URLLC capability since this is a safety-critical application. In this work, the resource allocation problem for an infrastructure-based communication architecture (Elevated LiDAR system/ ELiD) has been considered which can support the autonomous driving in a factory floor. The decoder error probability and the number of channel uses parameterize the reliability and the latency in the considered optimization problems. A maximum decoder error probability minimization problem and a total energy minimization problem have been considered in this work to analytically evaluate the performance of the ELiD system under different vehicle densities.
△ Less
Submitted 4 March, 2020;
originally announced March 2020.
-
Hierarchical User Clustering for mmWave-NOMA Systems
Authors:
Dileepa Marasinghe,
Nalin Jayaweera,
Nandana Rajatheva,
Matti Latva-aho
Abstract:
Non-orthogonal multiple access (NOMA) and mmWave are two complementary technologies that can support the capacity demand that arises in 5G and beyond networks. The increasing number of users are served simultaneously while providing a solution for the scarcity of the bandwidth. In this paper we present a method for clustering the users in a mmWave-NOMA system with the objective of maximizing the s…
▽ More
Non-orthogonal multiple access (NOMA) and mmWave are two complementary technologies that can support the capacity demand that arises in 5G and beyond networks. The increasing number of users are served simultaneously while providing a solution for the scarcity of the bandwidth. In this paper we present a method for clustering the users in a mmWave-NOMA system with the objective of maximizing the sum-rate. An unsupervised machine learning technique, namely, hierarchical clustering is utilized which does the automatic identification of the optimal number of clusters. The simulations prove that the proposed method can maximize the sum-rate of the system while satisfying the minimum QoS for all users without the need of the number of clusters as a prerequisite when compared to other clustering methods such as k-means clustering.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Block Error Performance of NOMA with HARQ-CC in Finite Blocklength
Authors:
Dileepa Marasinghe,
Nandana Rajatheva,
Matti Latva-aho
Abstract:
This paper investigates the performance of a two-user downlink non-orthogonal multiple access (NOMA) system using hybrid automatic repeat request with chase combining (HARQ-CC) in finite blocklength. First, an analytical framework is developed by deriving closed-form approximations for the individual average block error rate (BLER) of the near and the far user. Based upon that, the performance of…
▽ More
This paper investigates the performance of a two-user downlink non-orthogonal multiple access (NOMA) system using hybrid automatic repeat request with chase combining (HARQ-CC) in finite blocklength. First, an analytical framework is developed by deriving closed-form approximations for the individual average block error rate (BLER) of the near and the far user. Based upon that, the performance of NOMA is discussed in comparison to orthogonal multiple access (OMA), which draws the conclusion that NOMA outperforms OMA in terms of user fairness. Further, an algorithm is devised to determine the required blocklength and power allocation coefficients for NOMA that satisfies reliability targets for the users. The required blocklength for NOMA is compared to OMA, which shows NOMA has a lower blocklength requirement in high transmit signal-to-noise ratio (SNR) conditions, leading to lower latency than OMA when reliability requirements in terms of BLER for the two users are in the order of 10^(-5).
△ Less
Submitted 3 February, 2020; v1 submitted 30 October, 2019;
originally announced October 2019.