Showing 1–50 of 50 results for author: Lu, N

A Multi-module Robust Method for Transient Stability Assessment against False Label Injection Cyberattacks

Authors: Hanxuan Wang, Na Lu, Yinhong Liu, Zhuqing Wang, Zixuan Wang

Abstract: The success of deep learning in transient stability assessment (TSA) heavily relies on high-quality training data. However, the label information in TSA datasets is vulnerable to contamination through false label injection (FLI) cyberattacks, resulting in degraded performance of deep TSA models. To address this challenge, a Multi-Module Robust TSA method (MMR) is proposed to rectify the supervised… ▽ More The success of deep learning in transient stability assessment (TSA) heavily relies on high-quality training data. However, the label information in TSA datasets is vulnerable to contamination through false label injection (FLI) cyberattacks, resulting in degraded performance of deep TSA models. To address this challenge, a Multi-Module Robust TSA method (MMR) is proposed to rectify the supervised training process misguided by FLI in an unsupervised manner. In MMR, a supervised classification module and an unsupervised clustering module are alternatively trained to improve the clustering friendliness of representation leaning, thereby achieving accurate clustering assignments. Leveraging the clustering assignments, we construct a training label corrector to rectify the injected false labels and progressively enhance robustness and resilience against FLI. However, there is still a gap on accuracy and convergence speed between MMR and FLI-free deep TSA models. To narrow this gap, we further propose a human-in-the-loop training strategy, named MMR-HIL. In MMR-HIL, potential false samples can be detected by modeling the training loss with a Gaussian distribution. From these samples, the most likely false samples and most ambiguous samples are re-labeled by a TSA experts guided bi-directional annotator and then subjected to penalized optimization, aimed at improving accuracy and convergence speed. Extensive experiments indicate that MMR and MMR-HIL both exhibit powerful robustness against FLI in TSA performance. Moreover, the contaminated labels can also be effectively corrected, demonstrating superior resilience of the proposed methods. △ Less

Submitted 10 June, 2024; originally announced June 2024.

Applying Fine-Tuned LLMs for Reducing Data Needs in Load Profile Analysis

Authors: Yi Hu, Hyeon** Kim, Kai Ye, Ning Lu

Abstract: This paper presents a novel method for utilizing fine-tuned Large Language Models (LLMs) to minimize data requirements in load profile analysis, demonstrated through the restoration of missing data in power system load profiles. A two-stage fine-tuning strategy is proposed to adapt a pre-trained LLMs, i.e., GPT-3.5, for missing data restoration tasks. Through empirical evaluation, we demonstrate t… ▽ More This paper presents a novel method for utilizing fine-tuned Large Language Models (LLMs) to minimize data requirements in load profile analysis, demonstrated through the restoration of missing data in power system load profiles. A two-stage fine-tuning strategy is proposed to adapt a pre-trained LLMs, i.e., GPT-3.5, for missing data restoration tasks. Through empirical evaluation, we demonstrate the effectiveness of the fine-tuned model in accurately restoring missing data, achieving comparable performance to state-of-the-art specifically designed models such as BERT-PIN. Key findings include the importance of prompt engineering and the optimal utilization of fine-tuning samples, highlighting the efficiency of few-shot learning in transferring knowledge from general user cases to specific target users. Furthermore, the proposed approach demonstrates notable cost-effectiveness and time efficiency compared to training models from scratch, making it a practical solution for scenarios with limited data availability and computing resources. This research has significant potential for application to other power system load profile analysis tasks. Consequently, it advances the use of LLMs in power system analytics, offering promising implications for enhancing the resilience and efficiency of power distribution systems. △ Less

Submitted 2 June, 2024; originally announced June 2024.

A Novel Vision Transformer based Load Profile Analysis using Load Images as Inputs

Authors: Hyeon** Kim, Yi Hu, Kai Ye, Ning Lu

Abstract: This paper introduces ViT4LPA, an innovative Vision Transformer (ViT) based approach for Load Profile Analysis (LPA). We transform time-series load profiles into load images. This allows us to leverage the ViT architecture, originally designed for image processing, as a pre-trained image encoder to uncover latent patterns within load data. ViT is pre-trained using an extensive load image dataset,… ▽ More This paper introduces ViT4LPA, an innovative Vision Transformer (ViT) based approach for Load Profile Analysis (LPA). We transform time-series load profiles into load images. This allows us to leverage the ViT architecture, originally designed for image processing, as a pre-trained image encoder to uncover latent patterns within load data. ViT is pre-trained using an extensive load image dataset, comprising 1M load images derived from smart meter data collected over a two-year period from 2,000 residential users. The training methodology is self-supervised, masked image modeling, wherein masked load images are restored to reveal hidden relationships among image patches. The pre-trained ViT encoder is then applied to various downstream tasks, including the identification of electric vehicle (EV) charging loads and behind-the-meter solar photovoltaic (PV) systems and load disaggregation. Simulation results illustrate ViT4LPA's superior performance compared to existing neural network models in downstream tasks. Additionally, we conduct an in-depth analysis of the attention weights within the ViT4LPA model to gain insights into its information flow mechanisms. △ Less

Submitted 11 April, 2024; originally announced April 2024.

An Interpretable Power System Transient Stability Assessment Method with Expert Guiding Neural-Regression-Tree

Authors: Hanxuan Wang, Na Lu, Zixuan Wang, Jiacheng Liu, Jun Liu

Abstract: Deep learning based transient stability assessment (TSA) has achieved great success, yet the lack of interpretability hinders its industrial application. Although a great number of studies have tried to explore the interpretability of network solutions, many problems still remain unsolved: (1) the difference between the widely accepted power system knowledge and the generated interpretive rules is… ▽ More Deep learning based transient stability assessment (TSA) has achieved great success, yet the lack of interpretability hinders its industrial application. Although a great number of studies have tried to explore the interpretability of network solutions, many problems still remain unsolved: (1) the difference between the widely accepted power system knowledge and the generated interpretive rules is large, (2) the probability characteristics of the neural network have not been fully considered during generating the interpretive rules, (3) the cost of the trade-off between accuracy and interpretability is too heavy to take. To address these issues, an interpretable power system Transient Stability Assessment method with Expert guiding Neural-Regression-Tree (TSA-ENRT) is proposed. TSA-ENRT utilizes an expert guiding nonlinear regression tree to approximate the neural network prediction and the neural network can be explained by the interpretive rules generated by the tree model. The nonlinearity of the expert guiding nonlinear regression tree is endowed with the extracted knowledge from a simple two-machine three-bus power system, which forms an expert knowledge base and thus the generated interpretive rules are more consistent with human cognition. Besides, the expert guiding tree model can build a bridge between the interpretive rules and the probability prediction of neural network in a regression way. By regularizing the neural network with the average decision length of ENRT, the association of the neural network and tree model is constructed in the model training level which provides a better trade-off between accuracy and interpretability. Extensive experiments indicate the interpretive rules generated by the proposed TSA-ENRT are highly consistent with the neural network prediction and more agreed with human expert cognition. △ Less

Submitted 3 April, 2024; originally announced April 2024.

Electrical Load Forecasting Model Using Hybrid LSTM Neural Networks with Online Correction

Authors: Nan Lu, Quan Ouyang, Yang Li, Changfu Zou

Abstract: Accurate electrical load forecasting is of great importance for the efficient operation and control of modern power systems. In this work, a hybrid long short-term memory (LSTM)-based model with online correction is developed for day-ahead electrical load forecasting. Firstly, four types of features are extracted from the original electrical load dataset, including the historical time series, time… ▽ More Accurate electrical load forecasting is of great importance for the efficient operation and control of modern power systems. In this work, a hybrid long short-term memory (LSTM)-based model with online correction is developed for day-ahead electrical load forecasting. Firstly, four types of features are extracted from the original electrical load dataset, including the historical time series, time index features, historical statistical features, and similarity features. Then, a hybrid LSTM-based electrical load forecasting model is designed, where an LSTM neural network block and a fully-connected neural network block are integrated that can model both temporal features (historical time series) and non-temporal features (the rest features). A gradient regularization-based offline training algorithm and an output layer parameter fine-tuning-based online model correction method are developed to enhance the model's capabilities to defend against disturbance and adapt to the latest load data distribution, thus improving the forecasting accuracy. At last, extensive experiments are carried out to validate the effectiveness of the proposed electrical load forecasting strategy with superior accuracy compared with commonly used forecasting models. △ Less

Submitted 6 March, 2024; originally announced March 2024.

Multi-Feeder Restoration using Multi-Microgrid Formation and Management

Authors: Valliappan Muthukaruppan, Rongxing Hu, Ashwin Shirsat, Mesut Baran, Ning Lu, Wenyuan Tang, David Lubkeman

Abstract: This papers highlights the benefit of coordinating resources on mulitple active distribution feeders during severe long duration outages through multi-microgrid formation. A graph-theory based multi-microgrid formation algorithm is developed which is agnostic of the underlying energy management scheme of the microgrids and solved in a rolling horizon fashion. The algorithm is then enhanced to hand… ▽ More This papers highlights the benefit of coordinating resources on mulitple active distribution feeders during severe long duration outages through multi-microgrid formation. A graph-theory based multi-microgrid formation algorithm is developed which is agnostic of the underlying energy management scheme of the microgrids and solved in a rolling horizon fashion. The algorithm is then enhanced to handle multiple feeders where formation of long laterals needs to be avoided due to potential voltage control issues in distribution systems. The algorithm is evaluated on a synthetic two feeder system derived from interconnecting two IEEE 123 node system. The results indicate increased service to loads in the system and better utilization of renewable resources. △ Less

Submitted 26 November, 2023; originally announced November 2023.

Comments: Submitted to IEEE PESGM 2024

Assessment of Transmission-level Fault Impacts on 3-phase and 1-phase Distribution IBR Operation

Authors: Qi Xiao, Jongha Woo, Lidong Song, Bei Xu, David Lubkeman, Ning Lu, Abdul Shafae Mohammed, Johan Enslin, Cara De Coste Chacko, Kat Sico, Steven G. Whisenant

Abstract: The widespread deployment of inverter-based resources (IBRs) renders distribution systems susceptible to transmission-level faults. This paper presents a comprehensive analysis of the impact of transmission-level faults on 3-phase and 1-phase distribution IBR operation. To evaluate distributed IBR trip** across various phases and locations on a distribution feeder, we conduct simulations of both… ▽ More The widespread deployment of inverter-based resources (IBRs) renders distribution systems susceptible to transmission-level faults. This paper presents a comprehensive analysis of the impact of transmission-level faults on 3-phase and 1-phase distribution IBR operation. To evaluate distributed IBR trip** across various phases and locations on a distribution feeder, we conduct simulations of both symmetrical and unsymmetrical transmission faults at progressively greater electrical distances on a real-time transmission and distribution (T&D) co-simulation platform. The IBR power-to-load ratios (PLRs) at 50%, 100%, and 300% are considered to emulate low, medium, and high IBR conditions. Our results indicate that, while 1-phase and 2-phase faults typically trigger fewer IBR trips when compared to 3-phase faults, a significant power imbalance arises from the trip** of 1-phase IBRs on the affected phases. The imbalance can result in significant power quality problems and unintended equipment trip**. It may be necessary to design fault-ride-through mechanisms specifically tailored to 1-phase IBRs to help mitigate the power imbalances caused by unbalanced faults. △ Less

Submitted 1 April, 2024; v1 submitted 19 November, 2023; originally announced November 2023.

BERT-PIN: A BERT-based Framework for Recovering Missing Data Segments in Time-series Load Profiles

Authors: Yi Hu, Kai Ye, Hyeon** Kim, Ning Lu

Abstract: Inspired by the success of the Transformer model in natural language processing and computer vision, this paper introduces BERT-PIN, a Bidirectional Encoder Representations from Transformers (BERT) powered Profile Inpainting Network. BERT-PIN recovers multiple missing data segments (MDSs) using load and temperature time-series profiles as inputs. To adopt a standard Transformer model structure for… ▽ More Inspired by the success of the Transformer model in natural language processing and computer vision, this paper introduces BERT-PIN, a Bidirectional Encoder Representations from Transformers (BERT) powered Profile Inpainting Network. BERT-PIN recovers multiple missing data segments (MDSs) using load and temperature time-series profiles as inputs. To adopt a standard Transformer model structure for profile inpainting, we segment the load and temperature profiles into line segments, treating each segment as a word and the entire profile as a sentence. We incorporate a top candidates selection process in BERT-PIN, enabling it to produce a sequence of probability distributions, based on which users can generate multiple plausible imputed data sets, each reflecting different confidence levels. We develop and evaluate BERT-PIN using real-world dataset for two applications: multiple MDSs recovery and demand response baseline estimation. Simulation results show that BERT-PIN outperforms the existing methods in accuracy while is capable of restoring multiple MDSs within a longer window. BERT-PIN, served as a pre-trained model, can be fine-tuned for conducting many downstream tasks, such as classification and super resolution. △ Less

Submitted 26 October, 2023; originally announced October 2023.

Imperfect Digital Twin Assisted Low Cost Reinforcement Training for Multi-UAV Networks

Authors: Xiucheng Wang, Nan Cheng, Longfei Ma, Zhisheng Yin, Tom. Luan, Ning Lu

Abstract: Deep Reinforcement Learning (DRL) is widely used to optimize the performance of multi-UAV networks. However, the training of DRL relies on the frequent interactions between the UAVs and the environment, which consumes lots of energy due to the flying and communication of UAVs in practical experiments. Inspired by the growing digital twin (DT) technology, which can simulate the performance of algor… ▽ More Deep Reinforcement Learning (DRL) is widely used to optimize the performance of multi-UAV networks. However, the training of DRL relies on the frequent interactions between the UAVs and the environment, which consumes lots of energy due to the flying and communication of UAVs in practical experiments. Inspired by the growing digital twin (DT) technology, which can simulate the performance of algorithms in the digital space constructed by co** features of the physical space, the DT is introduced to reduce the costs of practical training, e.g., energy and hardware purchases. Different from previous DT-assisted works with an assumption of perfect reflecting real physics by virtual digital, we consider an imperfect DT model with deviations for assisting the training of multi-UAV networks. Remarkably, to trade off the training cost, DT construction cost, and the impact of deviations of DT on training, the natural and virtually generated UAV mixing deployment method is proposed. Two cascade neural networks (NN) are used to optimize the joint number of virtually generated UAVs, the DT construction cost, and the performance of multi-UAV networks. These two NNs are trained by unsupervised and reinforcement learning, both low-cost label-free training methods. Simulation results show the training cost can significantly decrease while guaranteeing the training performance. This implies that an efficient decision can be made with imperfect DTs in multi-UAV networks. △ Less

Submitted 24 October, 2023; originally announced October 2023.

Phase Synchrony Component Self-Organization in Brain Computer Interface

Authors: Xu Niu, Na Lu, Huan Luo, Ruofan Yan

Abstract: Phase synchrony information plays a crucial role in analyzing functional brain connectivity and identifying brain activities. A widely adopted feature extraction pipeline, composed of preprocessing, selection of EEG acquisition channels, and phase locking value (PLV) calculation, has achieved success in motor imagery classification (MI). However, this pipeline is manual and reliant on expert knowl… ▽ More Phase synchrony information plays a crucial role in analyzing functional brain connectivity and identifying brain activities. A widely adopted feature extraction pipeline, composed of preprocessing, selection of EEG acquisition channels, and phase locking value (PLV) calculation, has achieved success in motor imagery classification (MI). However, this pipeline is manual and reliant on expert knowledge, limiting its convenience and adaptability to different application scenarios. Moreover, most studies have employed mediocre data-independent spatial filters to suppress noise, impeding the exploration of more significant phase synchronization phenomena. To address the issues, we propose the concept of phase synchrony component self-organization, which enables the adaptive learning of data-dependent spatial filters for automating both the preprocessing and channel selection procedures. Based on this concept, the first deep learning end-to-end network is developed, which directly extracts phase synchrony-based features from raw EEG signals and perform classification. The network learns optimal filters during training, which are obtained when the network achieves peak classification results. Extensive experiments have demonstrated that our network outperforms state-of-the-art methods. Remarkably, through the learned optimal filters, significant phase synchronization phenomena can be observed. Specifically, by calculating the PLV between a pair of signals extracted from each sample using two of the learned spatial filters, we have obtained an average PLV exceeding 0.87 across all tongue MI samples. This high PLV indicates a groundbreaking discovery in the synchrony pattern of tongue MI. △ Less

Submitted 11 October, 2023; v1 submitted 21 September, 2023; originally announced October 2023.

Adopting Dynamic VAR Compensators to Mitigate PV Impacts on Unbalanced Distribution Systems

Authors: Han Pyo Lee, Keith DSouza, Ke Chen, Ning Lu, Mesut Baran

Abstract: The growing integration of distributed energy resources into distribution systems poses challenges for voltage regulation. Dynamic VAR Compensators (DVCs) are a new generation of power electronics-based Volt/VAR compensation devices designed to address voltage issues in distribution systems with a high penetration of renewable generation resources. Currently, the IEEE Std. 1547-based Volt/VAR Curv… ▽ More The growing integration of distributed energy resources into distribution systems poses challenges for voltage regulation. Dynamic VAR Compensators (DVCs) are a new generation of power electronics-based Volt/VAR compensation devices designed to address voltage issues in distribution systems with a high penetration of renewable generation resources. Currently, the IEEE Std. 1547-based Volt/VAR Curve (VV-C) is widely used as the local control scheme for controlling a DVC. However, the effectiveness of this scheme is not well documented, and there is limited literature on alternative control and placement schemes that can maximize the effective use of a DVC. In this paper, we propose an optimal dispatch and control mechanism to enhance the conventional VV-C based localized DVC control. First, we establish a multi-objective optimization framework to identify the optimal dispatch strategy and suitable placement for the DVC. Next, we introduce two supervisory control strategies to determine the appropriate instances for adjusting the VV-C when the operating condition changes. The outlined scheme comprises two primary stages: time segmentation and VV-C fitting. Within this framework, each time segment aims to produce optimized Q-V trajectories. The proposed method is tested on a modified IEEE 123-bus test system using OpenDSS for a wide range of operating scenarios, including sunny and cloudy days. Simulation results demonstrate that the proposed scheme effectively reduces voltage variations compared to the standard VV-C specified in IEEE Std. 1547. △ Less

Submitted 12 September, 2023; originally announced September 2023.

Comments: Submitted to IEEE Access

Under-frequency Load Shedding for Power Reserve Management in Islanded Microgrids

Authors: Bei Xu, Victor Paduani, Qi Xiao, Lidong Song, David Lubkeman, Ning Lu

Abstract: This paper introduces under-frequency load shedding (UFLS) schemes specially designed to fulfill the power reserve requirements in islanded microgrids (MGs), where only one grid-forming resource is available for frequency regulation. When the power consumption of the MG exceeds a pre-defined threshold, the MG frequency will be lowered to various setpoints, thereby triggering UFLS for different lev… ▽ More This paper introduces under-frequency load shedding (UFLS) schemes specially designed to fulfill the power reserve requirements in islanded microgrids (MGs), where only one grid-forming resource is available for frequency regulation. When the power consumption of the MG exceeds a pre-defined threshold, the MG frequency will be lowered to various setpoints, thereby triggering UFLS for different levels of load reduction. Three types of controllable devices are considered for executing UFLS: sectionalizers, smart meters, and controllable appliances. To avoid unnecessary UFLS activation, various time delay settings are analyzed, allowing short-lived power spikes caused by events like motor startups or cold-load pickups to be disregarded. We tested the proposed UFLS schemes on a modified IEEE 123-bus system on the OPAL-RT eMEGASIM platform. Simulation results verify the efficacy of the proposed approaches in restoring power reserves, maintaining phase power balance, and effectively handling short-lived power fluctuations. Furthermore, in comparison to sectionalizer-based UFLS, using smart meters or controllable loads for UFLS allows for a more accurate per-phase load shedding in a progressive manner. As a result, it leads to better balanced three-phase voltage and serves more loads. △ Less

Submitted 6 September, 2023; v1 submitted 3 September, 2023; originally announced September 2023.

Comments: 10 pages, 15 figures

Digital Twin-Assisted Knowledge Distillation Framework for Heterogeneous Federated Learning

Authors: Xiucheng Wang, Nan Cheng, Longfei Ma, Rui** Sun, Rong Chai, Ning Lu

Abstract: In this paper, to deal with the heterogeneity in federated learning (FL) systems, a knowledge distillation (KD) driven training framework for FL is proposed, where each user can select its neural network model on demand and distill knowledge from a big teacher model using its own private dataset. To overcome the challenge of train the big teacher model in resource limited user devices, the digital… ▽ More In this paper, to deal with the heterogeneity in federated learning (FL) systems, a knowledge distillation (KD) driven training framework for FL is proposed, where each user can select its neural network model on demand and distill knowledge from a big teacher model using its own private dataset. To overcome the challenge of train the big teacher model in resource limited user devices, the digital twin (DT) is exploit in the way that the teacher model can be trained at DT located in the server with enough computing resources. Then, during model distillation, each user can update the parameters of its model at either the physical entity or the digital agent. The joint problem of model selection and training offloading and resource allocation for users is formulated as a mixed integer programming (MIP) problem. To solve the problem, Q-learning and optimization are jointly used, where Q-learning selects models for users and determines whether to train locally or on the server, and optimization is used to allocate resources for users based on the output of Q-learning. Simulation results show the proposed DT-assisted KD framework and joint optimization method can significantly improve the average accuracy of users while reducing the total delay. △ Less

Submitted 10 March, 2023; originally announced March 2023.

A Novel Feeder-level Microgrid Unit Commitment Algorithm Considering Cold-load Pickup, Phase Balancing, and Reconfiguration

Authors: Rongxing Hu, Ashwin Shirsat, Valliappan Muthukaruppan, Si Zhang, Yiyan Li, Lidong Song, Bei Xu, Victor Paduani, Ning Lu, Mesut Baran, Wenyuan Tang

Abstract: This paper presents a novel 2-stage microgrid unit commitment (Microgrid-UC) algorithm considering cold-load pickup (CLPU) effects, three-phase load balancing requirements, and feasible reconfiguration options. Microgrid-UC schedules the operation of switches, generators, battery energy storage systems, and demand response resources to supply 3-phase unbalanced loads in an islanded microgrid for m… ▽ More This paper presents a novel 2-stage microgrid unit commitment (Microgrid-UC) algorithm considering cold-load pickup (CLPU) effects, three-phase load balancing requirements, and feasible reconfiguration options. Microgrid-UC schedules the operation of switches, generators, battery energy storage systems, and demand response resources to supply 3-phase unbalanced loads in an islanded microgrid for multiple days. A performance-based CLPU model is developed to estimate additional energy needs of CLPU so that CLPU can be formulated into the traditional 2-stage UC scheduling process. A per-phase demand response budget term is added to the 1st stage UC objective function to meet 3-phase load unbalance limits. To reduce computational complexity in the 1st stage UC, we replace the spanning tree method with a feasible reconfiguration topology list method. The proposed algorithm is developed on a modified IEEE 123-bus system and tested on the real-time simulation testbed using actual load and PV data. Simulation results show that Microgrid-UC successfully accounts for CLPU, phase imbalance, and feeder reconfiguration requirements. △ Less

Submitted 19 January, 2023; originally announced January 2023.

Comments: 10 pages, submitted to IEEE Transactions on Smart Grid

Design Considerations of a Coordinative Demand Charge Mitigation Strategy

Authors: Rongxing Hu, Kai Ye, Hyeon** Kim, Hanpyo Lee, Ning Lu, Di Wu, PJ Rehm

Abstract: This paper presents a coordinative demand charge mitigation (DCM) strategy for reducing electricity consumption during system peak periods. Available DCM resources include batteries, diesel generators, controllable loads, and conservation voltage reduction. All resources are directly controlled by load serving entities. A mixed integer linear programming based energy management algorithm is develo… ▽ More This paper presents a coordinative demand charge mitigation (DCM) strategy for reducing electricity consumption during system peak periods. Available DCM resources include batteries, diesel generators, controllable loads, and conservation voltage reduction. All resources are directly controlled by load serving entities. A mixed integer linear programming based energy management algorithm is developed to optimally coordinate of DCM resources considering the load payback effect. To better capture system peak periods, two different kinds of load forecast are used: the day-ahead load forecast and the peak-hour probability forecast. Five DCM strategies are compared for reconciling the discrepancy between the two forecasting results. The DCM strategies are tested using actual utility data. Simulation results show that the proposed algorithm can effectively mitigate the demand charge while preventing the system peak from being shifted to the payback hours. We also identify the diminishing return effect, which can help load serving entities optimize the size of their DCM resources. △ Less

Submitted 1 February, 2023; v1 submitted 16 December, 2022; originally announced December 2022.

Comments: 5 pages, 2023 PESGM

A Modified Sequence-to-point HVAC Load Disaggregation Algorithm

Authors: Kai Ye, Hyeon** Kim, Yi Hu, Ning Lu, Di Wu, PJ Rehm

Abstract: This paper presents a modified sequence-to-point (S2P) algorithm for disaggregating the heat, ventilation, and air conditioning (HVAC) load from the total building electricity consumption. The original S2P model is convolutional neural network (CNN) based, which uses load profiles as inputs. We propose three modifications. First, the input convolution layer is changed from 1D to 2D so that normali… ▽ More This paper presents a modified sequence-to-point (S2P) algorithm for disaggregating the heat, ventilation, and air conditioning (HVAC) load from the total building electricity consumption. The original S2P model is convolutional neural network (CNN) based, which uses load profiles as inputs. We propose three modifications. First, the input convolution layer is changed from 1D to 2D so that normalized temperature profiles are also used as inputs to the S2P model. Second, a drop-out layer is added to improve adaptability and generalizability so that the model trained in one area can be transferred to other geographical areas without labelled HVAC data. Third, a fine-tuning process is proposed for areas with a small amount of labelled HVAC data so that the pre-trained S2P model can be fine-tuned to achieve higher disaggregation accuracy (i.e., better transferability) in other areas. The model is first trained and tested using smart meter and sub-metered HVAC data collected in Austin, Texas. Then, the trained model is tested on two other areas: Boulder, Colorado and San Diego, California. Simulation results show that the proposed modified S2P algorithm outperforms the original S2P model and the support-vector machine based approach in accuracy, adaptability, and transferability. △ Less

Submitted 24 February, 2023; v1 submitted 9 December, 2022; originally announced December 2022.

Comments: To be published in the proceedings of the 2023 IEEE PES General Meeting

Optimal Control Design for Operating a Hybrid PV Plant with Robust Power Reserves for Fast Frequency Regulation Services

Authors: Victor Paduani, Qi Xiao, Bei Xu, David Lubkeman, Ning Lu

Abstract: This paper presents an optimal control strategy for operating a solar hybrid system consisting of solar photovoltaic (PV) and a high-power, low-storage battery energy storage system (BESS). A state-space model of the hybrid PV plant is first derived, based on which an adaptive model predictive controller is designed. The controller's objective is to control the PV and BESS to follow power setpoint… ▽ More This paper presents an optimal control strategy for operating a solar hybrid system consisting of solar photovoltaic (PV) and a high-power, low-storage battery energy storage system (BESS). A state-space model of the hybrid PV plant is first derived, based on which an adaptive model predictive controller is designed. The controller's objective is to control the PV and BESS to follow power setpoints sent to the the hybrid system while maintaining desired power reserves and meeting system operational constraints. Furthermore, an extended Kalman filter (EKF) is implemented for estimating the battery SOC, and an error sensitivity is executed to assess its limitations. To validate the proposed strategy, detailed EMT models of the hybrid system are developed so that losses and control limits can be quantified accurately. Day-long simulations are performed in an OPAL-RT real-time simulator using second-by-second actual PV farm data as inputs. Results verify that the proposed method can follow power setpoints while maintaining power reserves in days of high irradiance intermittency even with a small BESS storage. △ Less

Submitted 7 December, 2022; originally announced December 2022.

Comments: Submitted to IEEE Transactions on Sustainable Energy

Load Profile Inpainting for Missing Load Data Restoration and Baseline Estimation

Authors: Yiyan Li, Lidong Song, Yi Hu, Hanpyo Lee, Di Wu, PJ Rehm, Ning Lu

Abstract: This paper introduces a Generative Adversarial Nets (GAN) based, Load Profile Inpainting Network (Load-PIN) for restoring missing load data segments and estimating the baseline for a demand response event. The inputs are time series load data before and after the inpainting period together with explanatory variables (e.g., weather data). We propose a Generator structure consisting of a coarse netw… ▽ More This paper introduces a Generative Adversarial Nets (GAN) based, Load Profile Inpainting Network (Load-PIN) for restoring missing load data segments and estimating the baseline for a demand response event. The inputs are time series load data before and after the inpainting period together with explanatory variables (e.g., weather data). We propose a Generator structure consisting of a coarse network and a fine-tuning network. The coarse network provides an initial estimation of the data segment in the inpainting period. The fine-tuning network consists of self-attention blocks and gated convolution layers for adjusting the initial estimations. Loss functions are specially designed for the fine-tuning and the discriminator networks to enhance both the point-to-point accuracy and realisticness of the results. We test the Load-PIN on three real-world data sets for two applications: patching missing data and deriving baselines of conservation voltage reduction (CVR) events. We benchmark the performance of Load-PIN with five existing deep-learning methods. Our simulation results show that, compared with the state-of-the-art methods, Load-PIN can handle varying-length missing data events and achieve 15-30% accuracy improvement. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: Submitted to IEEE Transactions on Smart Grid

SigT: An Efficient End-to-End MIMO-OFDM Receiver Framework Based on Transformer

Authors: Ziyou Ren, Nan Cheng, Rui** Sun, Xiucheng Wang, Ning Lu, Wenchao Xu

Abstract: Multiple-input multiple-output and orthogonal frequency-division multiplexing (MIMO-OFDM) are the key technologies in 4G and subsequent wireless communication systems. Conventionally, the MIMO-OFDM receiver is performed by multiple cascaded blocks with different functions and the algorithm in each block is designed based on ideal assumptions of wireless channel distributions. However, these assump… ▽ More Multiple-input multiple-output and orthogonal frequency-division multiplexing (MIMO-OFDM) are the key technologies in 4G and subsequent wireless communication systems. Conventionally, the MIMO-OFDM receiver is performed by multiple cascaded blocks with different functions and the algorithm in each block is designed based on ideal assumptions of wireless channel distributions. However, these assumptions may fail in practical complex wireless environments. The deep learning (DL) method has the ability to capture key features from complex and huge data. In this paper, a novel end-to-end MIMO-OFDM receiver framework based on \textit{transformer}, named SigT, is proposed. By regarding the signal received from each antenna as a token of the transformer, the spatial correlation of different antennas can be learned and the critical zero-shot problem can be mitigated. Furthermore, the proposed SigT framework can work well without the inserted pilots, which improves the useful data transmission efficiency. Experiment results show that SigT achieves much higher performance in terms of signal recovery accuracy than benchmark methods, even in a low SNR environment or with a small number of training samples. Code is available at https://github.com/SigTransformer/SigT. △ Less

Submitted 2 November, 2022; originally announced November 2022.

An Iterative Bidirectional Gradient Boosting Approach for CVR Baseline Estimation

Authors: Han Pyo Lee, Yiyan Li, Lidong Song, Di Wu, Ning Lu

Abstract: This paper presents a novel Iterative Bidirectional Gradient Boosting Model (IBi-GBM) for estimating the baseline of Conservation Voltage Reduction (CVR) programs. In contrast to many existing methods, we treat CVR baseline estimation as a missing data retrieval problem. The approach involves dividing the load and its corresponding temperature profiles into three periods: pre-CVR, CVR, and post-CV… ▽ More This paper presents a novel Iterative Bidirectional Gradient Boosting Model (IBi-GBM) for estimating the baseline of Conservation Voltage Reduction (CVR) programs. In contrast to many existing methods, we treat CVR baseline estimation as a missing data retrieval problem. The approach involves dividing the load and its corresponding temperature profiles into three periods: pre-CVR, CVR, and post-CVR. To restore the missing load profile during the CVR period, the method employs a three-step process. First, a forward-pass GBM is executed using data from the pre-CVR period as inputs. Subsequently, a backward-pass GBM is applied using data from the post-CVR period. The two restored load profiles are reconciled, considering pre-calculated weights derived from forecasting accuracy, and only the leftmost and rightmost points are retained. The newly restored points are then included as inputs for the subsequent iteration. This iterative procedure continues until the original load data in the CVR period is fully restored. We develop IBi-GBM using actual smart meter and Supervisory Control and Data Acquisition (SCADA) data. Our results demonstrate that IBi-GBM exhibits robust performance across various data resolutions and in different seasons and outperforms existing methods by achieving a 1-2% reduction in normalized Root Mean Square Error (nRMSE). △ Less

Submitted 14 December, 2023; v1 submitted 7 November, 2022; originally announced November 2022.

Comments: 10 pages

MultiLoad-GAN: A GAN-Based Synthetic Load Group Generation Method Considering Spatial-Temporal Correlations

Authors: Yi Hu, Yiyan Li, Lidong Song, Han Pyo Lee, PJ Rehm, Matthew Makdad, Edmond Miller, Ning Lu

Abstract: This paper presents a deep-learning framework, Multi-load Generative Adversarial Network (MultiLoad-GAN), for generating a group of synthetic load profiles (SLPs) simultaneously. The main contribution of MultiLoad-GAN is the capture of spatial-temporal correlations among a group of loads that are served by the same distribution transformer. This enables the generation of a large amount of correlat… ▽ More This paper presents a deep-learning framework, Multi-load Generative Adversarial Network (MultiLoad-GAN), for generating a group of synthetic load profiles (SLPs) simultaneously. The main contribution of MultiLoad-GAN is the capture of spatial-temporal correlations among a group of loads that are served by the same distribution transformer. This enables the generation of a large amount of correlated SLPs required for microgrid and distribution system studies. The novelty and uniqueness of the MultiLoad-GAN framework are three-fold. First, to the best of our knowledge, this is the first method for generating a group of load profiles bearing realistic spatial-temporal correlations simultaneously. Second, two complementary realisticness metrics for evaluating generated load profiles are developed: computing statistics based on domain knowledge and comparing high-level features via a deep-learning classifier. Third, to tackle data scarcity, a novel iterative data augmentation mechanism is developed to generate training samples for enhancing the training of both the classifier and the MultiLoad-GAN model. Simulation results show that MultiLoad-GAN can generate more realistic load profiles than existing approaches, especially in group level characteristics. With little finetuning, MultiLoad-GAN can be readily extended to generate a group of load or PV profiles for a feeder or a service area. △ Less

Submitted 23 August, 2023; v1 submitted 3 October, 2022; originally announced October 2022.

Comments: in IEEE Transactions on Smart Grid

A Novel Power-Band based Data Segmentation Method for Enhancing Meter Phase and Transformer-Meter Pairing Identification

Authors: Han Pyo Lee, PJ Rehm, Matthew Makdad, Edmond Miller, Ning Lu

Abstract: This paper presents a novel power-band-based data segmentation (PBDS) method to enhance the identification of meter phase and meter-transformer pairing. Meters that share the same transformer or are on the same phase typically exhibit strongly correlated voltage profiles. However, under high power consumption, there can be significant voltage drops along the line connecting a customer to the distr… ▽ More This paper presents a novel power-band-based data segmentation (PBDS) method to enhance the identification of meter phase and meter-transformer pairing. Meters that share the same transformer or are on the same phase typically exhibit strongly correlated voltage profiles. However, under high power consumption, there can be significant voltage drops along the line connecting a customer to the distribution transformer. These voltage drops significantly decrease the correlations among meters on the same phase or supplied by the same transformer, resulting in high misidentification rates. To address this issue, we propose using power bands to select highly correlated voltage segments for computing correlations, rather than relying solely on correlations computed from the entire voltage waveforms. The algorithm's performance is assessed by conducting tests using data gathered from 13 utility feeders. To ensure the credibility of the identification results, utility engineers conduct field verification for all 13 feeders. The verification results unequivocally demonstrate that the proposed algorithm surpasses existing methods in both accuracy and robustness. △ Less

Submitted 14 September, 2023; v1 submitted 30 September, 2022; originally announced October 2022.

Comments: Submitted to the IEEE Transactions on Power Delivery. arXiv admin note: text overlap with arXiv:2111.10500

An ICA-Based HVAC Load Disaggregation Method Using Smart Meter Data

Authors: Hyeon** Kim, Kai Ye, Han Pyo Lee, Rongxing Hu, Ning Lu, Di Wu, PJ Rehm

Abstract: This paper presents an independent component analysis (ICA) based unsupervised-learning method for heat, ventilation, and air-conditioning (HVAC) load disaggregation using low-resolution (e.g., 15 minutes) smart meter data. We first demonstrate that electricity consumption profiles on mild-temperature days can be used to estimate the non-HVAC base load on hot days. A residual load profile can then… ▽ More This paper presents an independent component analysis (ICA) based unsupervised-learning method for heat, ventilation, and air-conditioning (HVAC) load disaggregation using low-resolution (e.g., 15 minutes) smart meter data. We first demonstrate that electricity consumption profiles on mild-temperature days can be used to estimate the non-HVAC base load on hot days. A residual load profile can then be calculated by subtracting the mild-day load profile from the hot-day load profile. The residual load profiles are processed using ICA for HVAC load extraction. An optimization-based algorithm is proposed for post-adjustment of the ICA results, considering two bounding factors for enhancing the robustness of the ICA algorithm. First, we use the hourly HVAC energy bounds computed based on the relationship between HVAC load and temperature to remove unrealistic HVAC load spikes. Second, we exploit the dependency between the daily nocturnal and diurnal loads extracted from historical meter data to smooth the base load profile. Pecan Street data with sub-metered HVAC data were used to test and validate the proposed methods.Simulation results demonstrated that the proposed method is computationally efficient and robust across multiple customers. △ Less

Submitted 19 September, 2022; originally announced September 2022.

Feeder Microgrid Management on an Active Distribution System during a Severe Outage

Authors: Valliappan Muthukaruppan, Ashwin Shirsat, Rongxing Hu, Victor Paduani, Bei Xu, Yiyan Li, Mesut Baran, Ning Lu, David Lubkeman, Wenyuan Tang

Abstract: Forming a microgrid on a distribution system with large scale outage after a severe weather event is emerging as a viable solution to improve resiliency at the distribution level. This option becomes more attractive when the distribution system has high levels of distributed PV. The management of such feeder-level microgrid has however many challenges, such as limited resources that can be deploye… ▽ More Forming a microgrid on a distribution system with large scale outage after a severe weather event is emerging as a viable solution to improve resiliency at the distribution level. This option becomes more attractive when the distribution system has high levels of distributed PV. The management of such feeder-level microgrid has however many challenges, such as limited resources that can be deployed on the feeder quickly, and the limited real-time monitoring and control on the distribution system. Effective use of the distributed PV is also challenging as they are not monitored and controlled. To handle these challenges, the paper proposes a 2-stage hierarchical energy management scheme to securely operate these feeder level micorgrids. The first stage of the scheme solves a sequential rolling optimization problem to optimally schedule the main resources (such as a mobile diesel generator and battery storage unit). The second stage adopts a dispatching scheme for the main resources to adjust the stage-1 set-points closer to real- time. The proposed scheme has unique features to assure that the scheme is robust under highly varying operating conditions with limited system observability: (i) an innovative PV forecast error adjustment and a dynamic reserve adjustment scheme to handle the extreme uncertainty on PV power output, and (ii) an intelligent fuel management scheme to assure that the resources are utilized optimally over the multiple days of the restoration period. The proposed algorithm is tested on sample system with real-time data. The results show that the proposed scheme performs well in maximizing service to loads by effective use of all the resources and by properly taking into account the challenging operating conditions. △ Less

Submitted 22 August, 2022; originally announced August 2022.

Comments: 9 pages, Journal Paper submitted to IEEE Transactions on Power System

On-Demand Resource Management for 6G Wireless Networks Using Knowledge-Assisted Dynamic Neural Networks

Authors: Longfei Ma, Nan Cheng, Xiucheng Wang, Rui** Sun, Ning Lu

Abstract: On-demand service provisioning is a critical yet challenging issue in 6G wireless communication networks, since emerging services have significantly diverse requirements and the network resources become increasingly heterogeneous and dynamic. In this paper, we study the on-demand wireless resource orchestration problem with the focus on the computing delay in orchestration decision-making process.… ▽ More On-demand service provisioning is a critical yet challenging issue in 6G wireless communication networks, since emerging services have significantly diverse requirements and the network resources become increasingly heterogeneous and dynamic. In this paper, we study the on-demand wireless resource orchestration problem with the focus on the computing delay in orchestration decision-making process. Specifically, we take the decision-making delay into the optimization problem. Then, a dynamic neural network (DyNN)-based method is proposed, where the model complexity can be adjusted according to the service requirements. We further build a knowledge base representing the relationship among the service requirements, available computing resources, and the resource allocation performance. By exploiting the knowledge, the width of DyNN can be selected in a timely manner, further improving the performance of orchestration. Simulation results show that the proposed scheme significantly outperforms the traditional static neural network, and also shows sufficient flexibility in on-demand service provisioning. △ Less

Submitted 2 August, 2022; originally announced August 2022.

Report number: unic-01

SA-HMTS: A Secure and Adaptive Hierarchical Multi-timescale Framework for Resilient Load Restoration Using A Community Microgrid

Authors: Ashwin Shirsat, Valliappan Muthukaruppan, Rongxing Hu, Victor Paduani, Bei Xu, Lidong Song, Yiyan Li, Ning Lu, Mesut Baran, David Lubkeman, Wenyuan Tang

Abstract: Distribution system integrated community microgrids (CMGs) can partake in restoring loads during extended duration outages. At such times, the CMG is challenged with limited resource availability, absence of robust grid support, and heightened demand-supply uncertainty. This paper proposes a secure and adaptive three-stage hierarchical multi-timescale framework for scheduling and real-time (RT) di… ▽ More Distribution system integrated community microgrids (CMGs) can partake in restoring loads during extended duration outages. At such times, the CMG is challenged with limited resource availability, absence of robust grid support, and heightened demand-supply uncertainty. This paper proposes a secure and adaptive three-stage hierarchical multi-timescale framework for scheduling and real-time (RT) dispatch of CMGs with hybrid PV systems to address these challenges. The framework enables the CMG to dynamically expand its boundary to support the neighboring grid sections and is adaptive to the changing forecast error impacts. The first stage solves a stochastic extended duration scheduling (EDS) problem to obtain referral plans for optimal resource rationing. The intermediate near-real-time (NRT) scheduling stage updates the EDS schedule closer to the dispatch time using newly obtained forecasts, followed by the RT dispatch stage. To make the dispatch decisions more secure and robust against forecast errors, a novel concept called delayed recourse is proposed. The methodology is evaluated via numerical simulations on a modified IEEE 123-bus system and validated using OpenDSS/hardware-in-loop simulations. The results show superior performance in maximizing load supply and continuous secure CMG operation under numerous operating scenarios. △ Less

Submitted 10 February, 2022; originally announced February 2022.

Reinforcement Learning for Volt-Var Control: A Novel Two-stage Progressive Training Strategy

Authors: Si Zhang, Mingzhi Zhang, Rongxing Hu, David Lubkeman, Yunan Liu, Ning Lu

Abstract: This paper develops a reinforcement learning (RL)approach to solve a cooperative, multi-agent Volt-Var Control (VVC) problem for high solar penetration distribution systems. The ingenuity of our RL method lies in a novel two-stage progressive training strategy that can effectively improve training speed and convergence of the machine learning algorithm. In Stage 1(individual training), while holdi… ▽ More This paper develops a reinforcement learning (RL)approach to solve a cooperative, multi-agent Volt-Var Control (VVC) problem for high solar penetration distribution systems. The ingenuity of our RL method lies in a novel two-stage progressive training strategy that can effectively improve training speed and convergence of the machine learning algorithm. In Stage 1(individual training), while holding all the other agents inactive, we separately train each agent to obtain its own optimal VVC actions in the action space: {consume, generate, do-nothing}. In Stage 2 (cooperative training), all agents are trained again coordinatively to share VVC responsibility. Rewards and costs in our RL scheme include (i) a system-level reward (for taking an action), (ii) an agent-level reward (for doing-nothing), and(iii) an agent-level action cost function. This new framework allows rewards to be dynamically allocated to each agent based on their contribution while accounting for the trade-off between control effectiveness and action cost. The proposed methodology is tested and validated in a modified IEEE 123-bus system using realistic PV and load profiles. Simulation results confirm that the proposed approach is robust and computationally efficient; and it achieves desirable volt-var control performance under a wide range of operation conditions. △ Less

Submitted 23 November, 2021; originally announced November 2021.

Comments: 5 pages

A Novel Data Segmentation Method for Data-driven Phase Identification

Authors: Han Pyo Lee, Mingzhi Zhang, Mesut Baran, Ning Lu, PJ Rehm, Edmond Miller, Matthew Makdad

Abstract: This paper presents a smart meter phase identification algorithm for two cases: meter-phase-label-known and meter-phase-label-unknown. To improve the identification accuracy, a data segmentation method is proposed to exclude data segments that are collected when the voltage correlation between smart meters on the same phase are weakened. Then, using the selected data segments, a hierarchical clust… ▽ More This paper presents a smart meter phase identification algorithm for two cases: meter-phase-label-known and meter-phase-label-unknown. To improve the identification accuracy, a data segmentation method is proposed to exclude data segments that are collected when the voltage correlation between smart meters on the same phase are weakened. Then, using the selected data segments, a hierarchical clustering method is used to calculate the correlation distances and cluster the smart meters. If the phase labels are unknown, a Connected-Triple-based Similarity (CTS) method is adapted to further improve the phase identification accuracy of the ensemble clustering method. The methods are developed and tested on both synthetic and real feeder data sets. Simulation results show that the proposed phase identification algorithm outperforms the state-of-the-art methods in both accuracy and robustness. △ Less

Submitted 19 November, 2021; originally announced November 2021.

Comments: 5 pages, 6 figures, 2022 PES General Meeting

Novel Real-Time EMT-TS Modeling Architecture for Feeder Blackstart Simulations

Authors: Victor Paduani, Bei Xu, David Lubkeman, Ning Lu

Abstract: This paper presents the development and benchmarking of a novel real-time electromagnetic-transient and transient-stability (EMT-TS) modeling architecture for distribution feeder restoration studies. The work presents for the first time in the literature a real-time EMT-TS testbed in which the grid-forming unit is simulated in EMT domain, operating as the slack bus of the phasor domain while inclu… ▽ More This paper presents the development and benchmarking of a novel real-time electromagnetic-transient and transient-stability (EMT-TS) modeling architecture for distribution feeder restoration studies. The work presents for the first time in the literature a real-time EMT-TS testbed in which the grid-forming unit is simulated in EMT domain, operating as the slack bus of the phasor domain while including unbalanced voltage conditions. To evaluate the performance and limitations of the proposed model, an equivalent EMT testbed is developed to serve as a benchmark. First, the co-simulation framework and the domain coupling methodology are introduced. Next, the steady-state operation of the EMT-TS and EMT models are matched. Then, tests are conducted to analyze the transient performance of the proposed EMT-TS model when compared to its EMT benchmark. Results reveal that when utilizing a battery energy storage system (BESS) as the grid-forming unit, the EMT-TS testbed can maintain high accuracy for typical load steps. △ Less

Submitted 18 November, 2021; originally announced November 2021.

Comments: Submitted to 2022 PESGM

A Novel Grid-forming Voltage Control Strategy for Supplying Unbalanced Microgrid Loads Using Inverter-based Resources

Authors: Bei Xu, Victor Paduani, Hui Yu, David Lubkeman, Ning Lu

Abstract: This paper presents a novel grid-forming voltage control strategy for a battery energy storage system to maintain balanced three-phase output voltages when serving unbalanced loads. A stationary reference frame ($αβ$) based control scheme is proposed to regulate positive-sequence and negative-sequence voltages. Compared with the conventional rotating reference frame ($dq$) based control scheme, th… ▽ More This paper presents a novel grid-forming voltage control strategy for a battery energy storage system to maintain balanced three-phase output voltages when serving unbalanced loads. A stationary reference frame ($αβ$) based control scheme is proposed to regulate positive-sequence and negative-sequence voltages. Compared with the conventional rotating reference frame ($dq$) based control scheme, the proposed scheme shows better dynamic performance. Then, we analyze the system zero-sequence network and propose adding a grounding transformer to the Y/Yg connected output transformer to further reduce the voltage unbalance at the point of common coupling. The simulation results demonstrate the effective performance of the proposed voltage control scheme. Based on the results, the power-voltage unbalance curve is derived for different output transformer configurations to establish the relationship between the power unbalance limit and the voltage unbalance limit for microgrid power scheduling. △ Less

Submitted 21 November, 2021; v1 submitted 17 November, 2021; originally announced November 2021.

Comments: 5 pages, 6 figures, 2022 PESGM conference

A TCN-based Hybrid Forecasting Framework for Hours-ahead Utility-scale PV Forecasting

Authors: Yiyan Li, Lidong Song, Si Zhang, Laura Kraus, Taylor Adcox, Roger Willardson, Abhishek Komandur, Ning Lu

Abstract: This paper presents a Temporal Convolutional Network (TCN) based hybrid PV forecasting framework for enhancing hours-ahead utility-scale PV forecasting. The hybrid framework consists of two forecasting models: a physics-based trend forecasting (TF) model and a data-driven cloud-event forecasting (CF) model. Three TCNs are integrated in the framework for: i) blending the inputs from different Numer… ▽ More This paper presents a Temporal Convolutional Network (TCN) based hybrid PV forecasting framework for enhancing hours-ahead utility-scale PV forecasting. The hybrid framework consists of two forecasting models: a physics-based trend forecasting (TF) model and a data-driven cloud-event forecasting (CF) model. Three TCNs are integrated in the framework for: i) blending the inputs from different Numerical Weather Prediction sources for the TF model to achieve superior performance on forecasting hourly PV profiles, ii) capturing spatial-temporal correlations between detector sites and the target site in the CF model to achieve more accurate forecast of intra-hour PV power drops, and iii) reconciling TF and CF results to obtain coherent hours-ahead PV forecast with both hourly trends and intra-hour fluctuations well preserved. To automatically identify the most contributive neighboring sites for forming a detector network, a scenario-based correlation analysis method is developed, which significantly improves the capability of the CF model on capturing large power fluctuations caused by cloud movements. The framework is developed, tested, and validated using actual PV data collected from 95 PV farms in North Carolina. Simulation results show that the performance of 6 hours ahead PV power forecasting is improved by approximately 20% compared with state-of-the-art methods. △ Less

Submitted 17 August, 2022; v1 submitted 16 November, 2021; originally announced November 2021.

Comments: Submitted to IEEE Transactions on Smart Grid

A Data-driven Probabilistic-based Flexibility Region Estimation Method for Aggregated Distributed Energy Resources

Authors: Mingzhi Zhang, Xiangqi Zhu, Ning Lu

Abstract: This paper presents a data-driven, distributionally robust chance-constrained optimization method for estimating the real and reactive power controllability of aggregated distributed energy resources (DER). At the DER-level, a two-dimensional flexibility region can be formed based on the real and reactive power regulating limits of each DER considering forecast uncertainty. At the feeder-level, an… ▽ More This paper presents a data-driven, distributionally robust chance-constrained optimization method for estimating the real and reactive power controllability of aggregated distributed energy resources (DER). At the DER-level, a two-dimensional flexibility region can be formed based on the real and reactive power regulating limits of each DER considering forecast uncertainty. At the feeder-level, an aggregated flexibility region is computed via a multi-directional search method. In each search direction, extend the real and reactive power of each controllable DER towards its operational limits until: i) all DERs' maximum operational limits are reached or, ii) one or more of the distribution network operational limits are violated. The method enables three key features for operating aggregated DER resources: controllability estimation, visualization, and risk quantification. Simulation results demonstrated the effectiveness of the algorithm and quantified the impact of different parameter settings on the flexibility region boundary changes. The proposed algorithm is robust and computationally efficient and can meet real-time computing needs. △ Less

Submitted 14 October, 2021; originally announced October 2021.

ProfileSR-GAN: A GAN based Super-Resolution Method for Generating High-Resolution Load Profiles

Authors: Lidong Song, Yiyan Li, Ning Lu

Abstract: It is a common practice for utilities to down-sample smart meter measurements from high resolution (e.g. 1-min or 1-sec) to low resolution (e.g. 15-, 30- or 60-min) to lower the data transmission and storage cost. However, down-sampling can remove high-frequency components from time-series load profiles, making them unsuitable for in-depth studies such as quasi-static power flow analysis or non-in… ▽ More It is a common practice for utilities to down-sample smart meter measurements from high resolution (e.g. 1-min or 1-sec) to low resolution (e.g. 15-, 30- or 60-min) to lower the data transmission and storage cost. However, down-sampling can remove high-frequency components from time-series load profiles, making them unsuitable for in-depth studies such as quasi-static power flow analysis or non-intrusive load monitoring (NILM). Thus, in this paper, we propose ProfileSR-GAN: a Generative Adversarial Network (GAN) based load profile super-resolution (LPSR) framework for restoring high-frequency components lost through the smoothing effect of the down-sampling process. The LPSR problem is formulated as a Maximum-a-Prior problem. When training the ProfileSR-GAN generator network, to make the generated profiles more realistic, we introduce two new shape-related losses in addition to conventionally used content loss: adversarial loss and feature-matching loss. Moreover, a new set of shape-based evaluation metrics are proposed to evaluate the realisticness of the generated profiles. Simulation results show that ProfileSR-GAN outperforms Mean-Square Loss based methods in all shape-based metrics. The successful application in NILM further demonstrates that ProfileSR-GAN is effective in recovering high-resolution realistic waveforms. △ Less

Submitted 26 January, 2022; v1 submitted 18 July, 2021; originally announced July 2021.

A Unified Power-Setpoint Tracking Algorithm for Utility-Scale PV Systems with Power Reserves and Fast Frequency Response Capabilities

Authors: Victor Paduani, Hui Yu, Bei Xu, Ning Lu

Abstract: This paper presents a fast power-setpoint tracking algorithm to enable utility-scale photovoltaic (PV) systems to provide high quality grid services such as power reserves and fast frequency response. The algorithm unites maximum power-point estimation (MPPE) with flexible power-point tracking (FPPT) control to improve the performance of both algorithms, achieving fast and accurate PV power-setpoi… ▽ More This paper presents a fast power-setpoint tracking algorithm to enable utility-scale photovoltaic (PV) systems to provide high quality grid services such as power reserves and fast frequency response. The algorithm unites maximum power-point estimation (MPPE) with flexible power-point tracking (FPPT) control to improve the performance of both algorithms, achieving fast and accurate PV power-setpoint tracking even under rapid solar irradiance changes. The MPPE is developed using a real-time, nonlinear curve-fitting approach based on the Levenberg-Marquardt algorithm. A modified adaptive FPPT based on the Perturb and Observe technique is developed for the power-setpoint tracking. By using MPPE to decouple the impact of irradiance changes on the measured PV output power, we develop a fast convergence technique for tracking power-reference changes within three FPPT iterations. Furthermore, to limit the maximum output power ripple, a new design is introduced for the steady-state voltage step size of the adaptive FPPT. The proposed algorithm is implemented on a testbed consisting of a 500 kVA three-phase, single-stage, utility-scale PV system on the OPAL-RT eMEGASIM platform. Results show that the proposed method outperforms the state-of-the-art. △ Less

Submitted 4 October, 2021; v1 submitted 11 May, 2021; originally announced May 2021.

Comments: Accepted by IEEE Transactions on Sustainable Energy

A Two-Stage Coordinative Zonal Volt/VAR Control Scheme for Distribution Systems with High Inverter-based Resources

Authors: Asmaa Alrushoud, Ning Lu

Abstract: This paper presents a two-stage zonal Volt/VAR control scheme for coordinating inverter-based resources (IBR) with utility-owned voltage regulators (VR) to regulate voltage in unbalanced 3-phase distribution systems. First, correlations between nodal voltages are derived from nodal voltage sensitivity studies. Then, the feeder is partitioned into non-overlap**, weakly-coupled voltage control zon… ▽ More This paper presents a two-stage zonal Volt/VAR control scheme for coordinating inverter-based resources (IBR) with utility-owned voltage regulators (VR) to regulate voltage in unbalanced 3-phase distribution systems. First, correlations between nodal voltages are derived from nodal voltage sensitivity studies. Then, the feeder is partitioned into non-overlap**, weakly-coupled voltage control zones based on nodal voltage correlations. IBR are used in the first stage to regulate voltage changes continuously and VR are used in the second stage to regulate large voltage deviations. An online VR voltage setpoint tuning strategy is developed to reduce excessive tap changes and avoid large voltage fluctuations without retrofitting existing VR controllers. In addition, the proposed algorithm uses real-time voltage measurements only from the critical nodes (typically less than 4% of total nodes) to reduce the sensing and communication needs. Actual distribution feeder topologies and load and PV time-series data are used to verify the performance of the algorithm. Because the method is a rule-based approach, it runs extremely fast, requires fewer measurements, and requires no retrofit to the existing VR control mechanisms. Simulation results show that the performance of the proposed method in terms of voltage control results and average numbers of VR tap changes are satisfactory. △ Less

Submitted 4 May, 2021; originally announced May 2021.

Comments: Submitted to IEEE Trans. on Smart Grid

EMS and DMS Integration of the Coordinative Real-time Sub-Transmission Volt-Var Control Tool under High DER Penetration

Authors: Quan Nguyen, Jim Ogle, Xiaoyuan Fan, Xinda Ke, Mallikarjuna R. Vallem, Nader Samaan, Ning Lu

Abstract: This paper proposes an applicable approach to deploy the Coordinative Real-time Sub-Transmission Volt-Var Control Tool (CReST-VCT), and a holistic system integration framework considering both the energy management system (EMS) and distribution system management system (DMS). This provides an architectural basis and can serve as the implementation guideline of CReST-VCT and other advanced grid sup… ▽ More This paper proposes an applicable approach to deploy the Coordinative Real-time Sub-Transmission Volt-Var Control Tool (CReST-VCT), and a holistic system integration framework considering both the energy management system (EMS) and distribution system management system (DMS). This provides an architectural basis and can serve as the implementation guideline of CReST-VCT and other advanced grid support tools, to co-optimize the operation benefits of distributed energy resources (DERs) and assets in both transmission and distribution networks. Potential communication protocols for different physical domains of a real application is included. Performance and security issues are also discussed, along with specific considerations for field deployment. Finally, the paper presents a viable pathway for CReST-VCT and other advanced grid support tools to be integrated in an open-source standardized-based platform that supports distribution utilities. △ Less

Submitted 18 March, 2021; originally announced March 2021.

Comments: 5 pages, 3 figures, conference

A Zonal Volt/VAR Control Mechanism for High PV Penetration Distribution Systems

Authors: Asmaa Alrushoud, Catie McEntee, Ning Lu

Abstract: This paper presents a zonal Volt/VAR control scheme that coordinates Photovoltaic (PV) inverters for providing voltage regulation on 3-phase unbalanced distribution feeders. Voltage sensitivity studies are conducted to uncover the dependency between nodal voltage changes and the reactive power injections at nodes with smart PV inverters. A fast incremental clustering method is developed to divide… ▽ More This paper presents a zonal Volt/VAR control scheme that coordinates Photovoltaic (PV) inverters for providing voltage regulation on 3-phase unbalanced distribution feeders. Voltage sensitivity studies are conducted to uncover the dependency between nodal voltage changes and the reactive power injections at nodes with smart PV inverters. A fast incremental clustering method is developed to divide the distribution feeder into weakly coupled zones based on correlations of nodal voltage sensitivities. Because each zone is weakly coupled, voltage of each zone can be controlled independently. Thus, in each zone, a rule-based voltage controller will dispatch PV smart inverters to provide reactive power control for correcting the over/under voltages. An actual distribution feeder in North Carolina is used as a test bed. Simulation results show that the proposed zonal based Volt/VAR control mechanism can maintain the voltage in the distribution system within limits and solves faster than the centralized controller. △ Less

Submitted 18 January, 2021; v1 submitted 31 December, 2020; originally announced January 2021.

Comments: 5 pages, 8 figures, submitted to 2021 IEEE PES General Meeting

Hierarchical Multi-timescale Framework For Operation of Dynamic Community Microgrid

Authors: Ashwin Shirsat, Valliappan Muthukaruppan, Rongxing Hu, Ning Lu, Mesut Baran, David Lubkeman, Wenyuan Tang

Abstract: Distribution system integrated community microgrids (CMGs) can restore loads during extended outages. The CMG is challenged with limited resource availability, absence of a robust grid-support, and demand-supply uncertainty. To address these challenges, this paper proposes a three-stage hierarchical multi-timescale framework for scheduling and real-time (RT) dispatch of CMGs. The CMG's ability to… ▽ More Distribution system integrated community microgrids (CMGs) can restore loads during extended outages. The CMG is challenged with limited resource availability, absence of a robust grid-support, and demand-supply uncertainty. To address these challenges, this paper proposes a three-stage hierarchical multi-timescale framework for scheduling and real-time (RT) dispatch of CMGs. The CMG's ability to dynamically expand its boundary to support the neighboring grid sections is also considered. The first stage solves a stochastic day-ahead (DA) scheduling problem to obtain referral plans for optimal resource rationing. The intermediate near real-time scheduling stage updates the DA schedule closer to the dispatch time, followed by the RT dispatch stage. The proposed methodology is validated via numerical simulations on a modified IEEE 123-bus system, which shows superior performance in terms of RT load supplied under different forecast error cases, outage duration scenarios, and against the traditionally used two-stage approach. △ Less

Submitted 6 January, 2021; v1 submitted 19 November, 2020; originally announced November 2020.

Comments: Submitted to 2021 IEEE PES General Meeting

Maximum Power Reference Tracking Algorithm for Power Curtailment of Photovoltaic Systems

Authors: Victor Paduani, Lidong Song, Bei Xu, Dr. Ning Lu

Abstract: This paper presents an algorithm for power curtail-ment of photovoltaic (PV) systems under fast solar irradiance intermittency. Based on the Perturb and Observe (P&O) technique, the method contains an adaptive gain that is compensated in real-time to account for moments of lower power availability. In addition, an accumulator is added to the calculation of the step size to reduce the overshoot cau… ▽ More This paper presents an algorithm for power curtail-ment of photovoltaic (PV) systems under fast solar irradiance intermittency. Based on the Perturb and Observe (P&O) technique, the method contains an adaptive gain that is compensated in real-time to account for moments of lower power availability. In addition, an accumulator is added to the calculation of the step size to reduce the overshoot caused by large irradiance swings. A testbed of a three-phase single-stage, 500 kVA PV system is developed on the OPAL-RT eMEGAsim real-time simulator. Field irradiance data and a regulation signal from PJM (RTO) are used to compare the performance of the proposed method with other techniques found in the literature. Results indicate an operation with smaller overshoot, less dc-link voltage oscillations, and improved power reference tracking capability. △ Less

Submitted 11 May, 2021; v1 submitted 18 November, 2020; originally announced November 2020.

Comments: Accepted by 2021 IEEE PES General Meeting

A Load Switching Group based Feeder-level Microgrid Energy Management Algorithm for Service Restoration in Power Distribution System

Authors: Rongxing Hu, Yiyan Li, Si Zhang, Ashwin Shirsat, Valliappan Muthukaruppan, Wenyuan Tang, Mesut Baran, David Lubkeman, Ning Lu

Abstract: This paper presents a load switching group based energy management system (LSG-EMS) for operating microgrids on a distribution feeder powered by one or multiple grid-forming distributed energy resources. Loads on a distribution feeder are divided into load switching groups that can be remotely switched on and off. The LSG-EMS algorithm, formulated as a mixed-integer linear programming (MILP) probl… ▽ More This paper presents a load switching group based energy management system (LSG-EMS) for operating microgrids on a distribution feeder powered by one or multiple grid-forming distributed energy resources. Loads on a distribution feeder are divided into load switching groups that can be remotely switched on and off. The LSG-EMS algorithm, formulated as a mixed-integer linear programming (MILP) problem, has an objective function of maximizing the served loads while minimizing the total number of switching actions. A new set of topology constraints are developed for allowing multiple microgrids to be formed on the feeder and selecting the optimal supply path. Customer comfort is accounted for by maximizing the supply duration in the customer preferred service period and enforcing a minimum service duration. The proposed method is demonstrated on a modified IEEE 33-bus system using actual customer data. Simulation results show that the LSG-EMS successfully coordinates multiple grid-forming sources by selecting an optimal supply topology that maximizes the supply period of both the critical and noncritical loads while minimizing customer service interruptions in the service restoration process. △ Less

Submitted 17 November, 2020; originally announced November 2020.

Comments: 5 pages, 7 figures, submitted to 2021 IEEE PES General Meeting

A Regression-based Voltage Estimation Method for Distribution Volt-Var Control with Limited Data

Authors: Catie McEntee, Ning Lu, David Lubkeman

Abstract: This paper presents a regression-based method for estimating voltages and voltage sensitivities for volt-var control on distribution circuits with limited data. The estimator uses power flow results for representative load and PV output scenarios as training data. Using linear regressions on power flow results, the voltages at critical nodes are calculated online based on power measurements at the… ▽ More This paper presents a regression-based method for estimating voltages and voltage sensitivities for volt-var control on distribution circuits with limited data. The estimator uses power flow results for representative load and PV output scenarios as training data. Using linear regressions on power flow results, the voltages at critical nodes are calculated online based on power measurements at the feeder head and at each PV plant. The voltage sensitivity to changes in reactive power injection by each PV plant is also found online using regressions on power flow results. The estimator thus provides the estimated critical voltages and their sensitivities to each possible control action. The estimator is tested in conjunction with a volt-var optimization on real, unbalanced rural distribution feeder. The optimal control actions and voltage results using the estimator are compared to the optimal results assuming full visibility of the distribution system. Results show that the estimator can estimate voltages and sensitivities with adequate accuracy for successful centralized volt-var control. △ Less

Submitted 23 October, 2020; originally announced October 2020.

A Meta-learning based Distribution System Load Forecasting Model Selection Framework

Authors: Yiyan Li, Si Zhang, Rongxing Hu, Ning Lu

Abstract: This paper presents a meta-learning based, automatic distribution system load forecasting model selection framework. The framework includes the following processes: feature extraction, candidate model labeling, offline training, and online model recommendation. Using user load forecasting needs as input features, multiple meta-learners are used to rank the available load forecast models based on t… ▽ More This paper presents a meta-learning based, automatic distribution system load forecasting model selection framework. The framework includes the following processes: feature extraction, candidate model labeling, offline training, and online model recommendation. Using user load forecasting needs as input features, multiple meta-learners are used to rank the available load forecast models based on their forecasting accuracy. Then, a scoring-voting mechanism weights recommendations from each meta-leaner to make the final recommendations. Heterogeneous load forecasting tasks with different temporal and technical requirements at different load aggregation levels are set up to train, validate, and test the performance of the proposed framework. Simulation results demonstrate that the performance of the meta-learning based approach is satisfactory in both seen and unseen forecasting tasks. △ Less

Submitted 15 April, 2021; v1 submitted 24 September, 2020; originally announced September 2020.

Comments: accepted by Applied Energy

Diesel Generator Model Parameterization for Microgrid Simulation Using Hybrid Box-Constrained Levenberg-Marquardt Algorithm

Authors: Qian Long, Hui Yu, Fuhong Xie, Ning Lu, David Lubkeman

Abstract: Existing generator parameterization methods, typically developed for large turbine generator units, are difficult to apply to small kW-level diesel generators in microgrid applications. This paper presents a model parameterization method that estimates a complete set of kW-level diesel generator parameters simultaneously using only load-step-change tests with limited measurement points. This metho… ▽ More Existing generator parameterization methods, typically developed for large turbine generator units, are difficult to apply to small kW-level diesel generators in microgrid applications. This paper presents a model parameterization method that estimates a complete set of kW-level diesel generator parameters simultaneously using only load-step-change tests with limited measurement points. This method provides a more cost-efficient and robust approach to achieve high-fidelity modeling of diesel generators for microgrid dynamic simulation. A two-stage hybrid box-constrained Levenberg-Marquardt (H-BCLM) algorithm is developed to search the optimal parameter set given the parameter bounds. A heuristic algorithm, namely Generalized Opposition-based Learning Genetic Algorithm (GOL-GA), is applied to identify proper initial estimates at the first stage, followed by a modified Levenberg-Marquardt algorithm designed to fine tune the solution based on the first-stage result. The proposed method is validated against dynamic simulation of a diesel generator model and field measurements from a 16kW diesel generator unit. △ Less

Submitted 25 September, 2020; v1 submitted 22 September, 2020; originally announced September 2020.

Comments: 9 pages, 9 figures, accepted by IEEE Transactions on Smart Grids

Impacts of PV Capacity Allocation Methods on Distribution Planning Studies

Authors: Asmaa Alrushoud, Ning Lu

Abstract: This paper presents a new method for assessing the amount of photovoltaics that can be accommodated on a distribution feeder before disrupting the normal operational conditions, commonly referred to hosting capacity. An optimal-capacity-based (OCB) PV allocation method is proposed to evaluate PV hosting capacity. We fist use load allocation method to allocate realistic load profiles to each load n… ▽ More This paper presents a new method for assessing the amount of photovoltaics that can be accommodated on a distribution feeder before disrupting the normal operational conditions, commonly referred to hosting capacity. An optimal-capacity-based (OCB) PV allocation method is proposed to evaluate PV hosting capacity. We fist use load allocation method to allocate realistic load profiles to each load node down to each household. Instead of randomly assigning the installed capacity of PV to each household, the optimal size of PV for each house is first calculated based on the annual load profiles. Different PV allocation methods for hosting capacity calculation are first compared using the IEEE 123-bus system as a benchmark. An actual distribution feeder in North Carolina area is used to validate the results in realistic distribution systems. The simulation results show that the impact of PV capacity allocation methods on hosting capacity assessment is significant. We also investigate the zonal allocation method for weak zone identification to address the cluster phenomena in technology diffusion. △ Less

Submitted 21 April, 2020; originally announced April 2020.

Time Series Classification for Locating Forced Oscillation Sources

Authors: Yao Meng, Zhe Yu, Ning Lu, Di shi

Abstract: Forced oscillations are caused by sustained cyclic disturbances. This paper presents a machine learning (ML) based time-series classification method that uses the synchrophasor measurements to locate the sources of forced oscillations for fast disturbance removal. Sequential feature selection is used to identify the most informative measurements of each power plant so that multivariate time series… ▽ More Forced oscillations are caused by sustained cyclic disturbances. This paper presents a machine learning (ML) based time-series classification method that uses the synchrophasor measurements to locate the sources of forced oscillations for fast disturbance removal. Sequential feature selection is used to identify the most informative measurements of each power plant so that multivariate time series (MTS) can be constructed. By training the Mahalanobis matrix, we measure and compare the distance between the MTSs. Templates for representing each class is constructed to reduce the size of training datasets and improve the online matching efficiency. Dynamic time war** (DTW) algorithm is used to align the out-of-sync MTSs to account for oscillation detection errors. The algorithm is validated on two test systems: the IEEE 39-bus system and the WECC 179-bus system. When a forced oscillation occurs, MTSs will be constructed by designated PMU measurements. Then, the MTSs will be classified by the trained classifiers, the class membership of which corresponds to the location of each oscillation source. Simulation results show that the proposed method can be used online to identify the forced oscillation sources with high accuracy. The robustness of the proposed algorithm in the presence of oscillation detection errors is also quantified. △ Less

Submitted 15 April, 2020; originally announced April 2020.

Comments: submitted to IEEE Trans. on Smart Grid

FeederGAN: Synthetic Feeder Generation via Deep Graph Adversarial Nets

Authors: Ming Liang, Yao Meng, Jiyu Wang, David Lubkeman, Ning Lu

Abstract: This paper presents a novel, automated, generative adversarial networks (GAN) based synthetic feeder generation mechanism, abbreviated as FeederGAN. FeederGAN digests real feeder models represented by directed graphs via a deep learning framework powered by GAN and graph convolutional networks (GCN). Information of a distribution feeder circuit is extracted from its model input files so that the d… ▽ More This paper presents a novel, automated, generative adversarial networks (GAN) based synthetic feeder generation mechanism, abbreviated as FeederGAN. FeederGAN digests real feeder models represented by directed graphs via a deep learning framework powered by GAN and graph convolutional networks (GCN). Information of a distribution feeder circuit is extracted from its model input files so that the device connectivity is mapped onto the adjacency matrix and the device characteristics, such as circuit types (i.e., 3-phase, 2-phase, and 1-phase) and component attributes (e.g., length and current ratings), are mapped onto the attribute matrix. Then, Wasserstein distance is used to optimize the GAN and GCN is used to discriminate the generated graphs from the actual ones. A greedy method based on graph theory is developed to reconstruct the feeder using the generated adjacency and attribute matrices. Our results show that the GAN generated feeders resemble the actual feeder in both topology and attributes verified by visual inspection and by empirical statistics obtained from actual distribution feeders. △ Less

Submitted 16 September, 2020; v1 submitted 3 April, 2020; originally announced April 2020.

Comments: Accepted by IEEE Trans. on Smart Grid

An Networked HIL Simulation System for Modeling Large-scale Power Systems

Authors: Fuhong Xie, Catie McEntee, Mingzhi Zhang, Ning Lu, Xinda Ke, Mallikarjuna R. Vallem, Nader Samaan

Abstract: This paper presents a network hardware-in-the-loop (HIL) simulation system for modeling large-scale power systems. Researchers have developed many HIL test systems for power systems in recent years. Those test systems can model both microsecond-level dynamic responses of power electronic systems and millisecond-level transients of transmission and distribution grids. By integrating individual HIL… ▽ More This paper presents a network hardware-in-the-loop (HIL) simulation system for modeling large-scale power systems. Researchers have developed many HIL test systems for power systems in recent years. Those test systems can model both microsecond-level dynamic responses of power electronic systems and millisecond-level transients of transmission and distribution grids. By integrating individual HIL test systems into a network of HIL test systems, we can create large-scale power grid digital twins with flexible structures at required modeling resolution that fits for a wide range of system operating conditions. This will not only significantly reduce the need for field tests when develo** new technologies but also greatly shorten the model development cycle. In this paper, we present a networked OPAL-RT based HIL test system for develo** transmission-distribution coordinative Volt-VAR regulation technologies as an example to illustrate system setups, communication requirements among different HIL simulation systems, and system connection mechanisms. Impacts of communication delays, information exchange cycles, and computing delays are illustrated. Simulation results show that the performance of a networked HIL test system is satisfactory. △ Less

Submitted 17 February, 2020; originally announced February 2020.

Repurposing an Energy System Optimization Model for Seasonal Power Generation Planning

Authors: A. R. de Queiroz, D. Mulcahy, A. Sankarasubramanian, J. P. Deane, G. Mahinthakumar, N. Lu, J. F. DeCarolis

Abstract: Seasonal climate variations affect electricity demand, which in turn affects month-to-month electricity planning and operations. Electricity system planning at the monthly timescale can be improved by adapting climate forecasts to estimate electricity demand and utilizing energy models to estimate monthly electricity generation and associated operational costs. The objective of this paper is to de… ▽ More Seasonal climate variations affect electricity demand, which in turn affects month-to-month electricity planning and operations. Electricity system planning at the monthly timescale can be improved by adapting climate forecasts to estimate electricity demand and utilizing energy models to estimate monthly electricity generation and associated operational costs. The objective of this paper is to develop and test a computationally efficient model that can support seasonal planning while preserving key aspects of system operation over hourly and daily timeframes. To do so, an energy system optimization model is repurposed for seasonal planning using features drawn from a unit commitment model. Different scenarios utilizing a well-known test system are used to evaluate the errors associated with both the repurposed energy system model and an imperfect load forecast. The results show that the energy system optimization model using an imperfect load forecast produces differences in monthly cost and generation levels that are less than 2% compared with a unit commitment model using a perfect load forecast. The enhanced energy system optimization model can be solved approximately 100 times faster than the unit commitment model, making it a suitable tool for future work aimed at evaluating seasonal electricity generation and demand under uncertainty. △ Less

Submitted 9 November, 2019; originally announced November 2019.

Comments: 22 pages, 5 figures

Journal ref: Energy, 181: 1321-1330 (2019)

A Novel Sliding Mode Control for a Class of Affine Dynamic Systems

Authors: Zuren Feng, Ruizhi Sha, Na Lu, Chenlong He

Abstract: This paper proposes a novel sliding mode control (SMC) method for a class of affine dynamic systems. In this type of systems, the high-frequency gain matrix (HFGM), which is the matrix multiplying the control vector in the dynamic equation of the sliding variables vector, is neither deterministic nor positive definite. This case has rarely been covered by general SMC methods, which perform well un… ▽ More This paper proposes a novel sliding mode control (SMC) method for a class of affine dynamic systems. In this type of systems, the high-frequency gain matrix (HFGM), which is the matrix multiplying the control vector in the dynamic equation of the sliding variables vector, is neither deterministic nor positive definite. This case has rarely been covered by general SMC methods, which perform well under the condition that the HFGM is certain or uncertain but positive definite. In this study, the control law is determined by solving a nonlinear vector equation instead of the conventional algebraic expression, which is not applicable when the HFGM is uncertain and non-positive definite. Theorems with some relaxed system parametric uncertainty assumptions are proposed to guarantee the existence and uniqueness of the solution, and proofs of them, based on the principle of the convex cone set, are given in the text. The proposed control strategy can be easily applied in practice, and the chattering caused by the discontinuous control can be suppressed, as it can in general SMCs. The proposed controller was used in two affine dynamic systems, and the simulation results demonstrate its effectiveness. △ Less

Submitted 14 August, 2018; originally announced August 2018.

Air-Ground Integrated Mobile Edge Networks: Architecture, Challenges and Opportunities

Authors: Nan Cheng, Wenchao Xu, Weisen Shi, Yi Zhou, Ning Lu, Haibo Zhou, Xuemin, Shen

Abstract: The ever-increasing mobile data demands have posed significant challenges in the current radio access networks, while the emerging computation-heavy Internet of things (IoT) applications with varied requirements demand more flexibility and resilience from the cloud/edge computing architecture. In this article, to address the issues, we propose a novel air-ground integrated mobile edge network (AGM… ▽ More The ever-increasing mobile data demands have posed significant challenges in the current radio access networks, while the emerging computation-heavy Internet of things (IoT) applications with varied requirements demand more flexibility and resilience from the cloud/edge computing architecture. In this article, to address the issues, we propose a novel air-ground integrated mobile edge network (AGMEN), where UAVs are flexibly deployed and scheduled, and assist the communication, caching, and computing of the edge network. In specific, we present the detailed architecture of AGMEN, and investigate the benefits and application scenarios of drone-cells, and UAV-assisted edge caching and computing. Furthermore, the challenging issues in AGMEN are discussed, and potential research directions are highlighted. △ Less

Submitted 12 April, 2018; originally announced April 2018.

Comments: Accepted by IEEE Communications Magazine. 5 figures