Showing 1–23 of 23 results for author: Liao, S

EVA-GAN: Enhanced Various Audio Generation via Scalable Generative Adversarial Networks

Authors: Shijia Liao, Shiyi Lan, Arun George Zachariah

Abstract: The advent of Large Models marks a new era in machine learning, significantly outperforming smaller models by leveraging vast datasets to capture and synthesize complex patterns. Despite these advancements, the exploration into scaling, especially in the audio generation domain, remains limited, with previous efforts didn't extend into the high-fidelity (HiFi) 44.1kHz domain and suffering from bot… ▽ More The advent of Large Models marks a new era in machine learning, significantly outperforming smaller models by leveraging vast datasets to capture and synthesize complex patterns. Despite these advancements, the exploration into scaling, especially in the audio generation domain, remains limited, with previous efforts didn't extend into the high-fidelity (HiFi) 44.1kHz domain and suffering from both spectral discontinuities and blurriness in the high-frequency domain, alongside a lack of robustness against out-of-domain data. These limitations restrict the applicability of models to diverse use cases, including music and singing generation. Our work introduces Enhanced Various Audio Generation via Scalable Generative Adversarial Networks (EVA-GAN), yields significant improvements over previous state-of-the-art in spectral and high-frequency reconstruction and robustness in out-of-domain data performance, enabling the generation of HiFi audios by employing an extensive dataset of 36,000 hours of 44.1kHz audio, a context-aware module, a Human-In-The-Loop artifact measurement toolkit, and expands the model to approximately 200 million parameters. Demonstrations of our work are available at https://double-blind-eva-gan.cc. △ Less

Submitted 30 January, 2024; originally announced February 2024.

A Convex Optimization Approach to Compute Trap** Regions for Lossless Quadratic Systems

Authors: Shih-Chi Liao, A. Leonid Heide, Maziar S. Hemati, Peter J. Seiler

Abstract: Quadratic systems with lossless quadratic terms arise in many applications, including models of atmosphere and incompressible fluid flows. Such systems have a trap** region if all trajectories eventually converge to and stay within a bounded set. Conditions for the existence and characterization of trap** regions have been established in prior works for boundedness analysis. However, prior sol… ▽ More Quadratic systems with lossless quadratic terms arise in many applications, including models of atmosphere and incompressible fluid flows. Such systems have a trap** region if all trajectories eventually converge to and stay within a bounded set. Conditions for the existence and characterization of trap** regions have been established in prior works for boundedness analysis. However, prior solutions have used non-convex optimization methods, resulting in conservative estimates. In this paper, we build on this prior work and provide a convex semidefinite programming condition for the existence of a trap** region. The condition allows precise verification or falsification of the existence of a trap** region. If a trap** region exists, then we provide a second semidefinite program to compute the least conservative trap** region in the form of a ball. Two low-dimensional systems are provided as examples to illustrate the results. A third high-dimensional example is also included to demonstrate that the computation required for the analysis can be scaled to systems of up to $\sim O(100)$ states. The proposed method provides a precise and computationally efficient numerical approach for computing trap** regions. We anticipate this work will benefit future studies on modeling and control of lossless quadratic dynamical systems. △ Less

Submitted 9 January, 2024; originally announced January 2024.

Material decomposition for dual-energy propagation-based phase-contrast CT

Authors: Suyu Liao, Huitao Zhang, Peng Zhang, Yining Zhu

Abstract: Material decomposition refers to using the energy dependence of material physical properties to differentiate materials in a sample, which is a very important application in computed tomography(CT). In propagation-based X-ray phase-contrast CT, the phase retrieval and Reconstruction are always independent. Moreover, like in conventional CT, the material decomposition methods in this technique can… ▽ More Material decomposition refers to using the energy dependence of material physical properties to differentiate materials in a sample, which is a very important application in computed tomography(CT). In propagation-based X-ray phase-contrast CT, the phase retrieval and Reconstruction are always independent. Moreover, like in conventional CT, the material decomposition methods in this technique can be classified into two types based on pre-reconstruction and post-reconstruction (two-step). The CT images often suffer from noise and artifacts in those methods because of no feedback and correction from the intensity data. This work investigates an iterative method to obtain material decomposition directly from the intensity data in different energies, which means that we perform phase retrieval, reconstruction and material decomposition in a one step. Fresnel diffraction is applied to forward propagation and CT images interact with this intensity data throughout the iterative process. Experiments results demonstrate that compared with two-step methods, the proposed method is superior in accurate material decomposition and noise reduction. △ Less

Submitted 29 November, 2023; originally announced November 2023.

Image Blind Denoising Using Dual Convolutional Neural Network with Skip Connection

Authors: Wencong Wu, Shicheng Liao, Guannan Lv, Peng Liang, Yungang Zhang

Abstract: In recent years, deep convolutional neural networks have shown fascinating performance in the field of image denoising. However, deeper network architectures are often accompanied with large numbers of model parameters, leading to high training cost and long inference time, which limits their application in practical denoising tasks. In this paper, we propose a novel dual convolutional blind denoi… ▽ More In recent years, deep convolutional neural networks have shown fascinating performance in the field of image denoising. However, deeper network architectures are often accompanied with large numbers of model parameters, leading to high training cost and long inference time, which limits their application in practical denoising tasks. In this paper, we propose a novel dual convolutional blind denoising network with skip connection (DCBDNet), which is able to achieve a desirable balance between the denoising effect and network complexity. The proposed DCBDNet consists of a noise estimation network and a dual convolutional neural network (CNN). The noise estimation network is used to estimate the noise level map, which improves the flexibility of the proposed model. The dual CNN contains two branches: a u-shaped sub-network is designed for the upper branch, and the lower branch is composed of the dilated convolution layers. Skip connections between layers are utilized in both the upper and lower branches. The proposed DCBDNet was evaluated on several synthetic and real-world image denoising benchmark datasets. Experimental results have demonstrated that the proposed DCBDNet can effectively remove gaussian noise in a wide range of levels, spatially variant noise and real noise. With a simple model structure, our proposed DCBDNet still can obtain competitive denoising performance compared to the state-of-the-art image denoising models containing complex architectures. Namely, a favorable trade-off between denoising performance and model complexity is achieved. Codes are available at https://github.com/WenCongWu/DCBDNet. △ Less

Submitted 4 April, 2023; originally announced April 2023.

KD-DLGAN: Data Limited Image Generation via Knowledge Distillation

Authors: Kaiwen Cui, Yingchen Yu, Fangneng Zhan, Shengcai Liao, Shijian Lu1, Eric Xing

Abstract: Generative Adversarial Networks (GANs) rely heavily on large-scale training data for training high-quality image generation models. With limited training data, the GAN discriminator often suffers from severe overfitting which directly leads to degraded generation especially in generation diversity. Inspired by the recent advances in knowledge distillation (KD), we propose KD-DLGAN, a knowledge-dis… ▽ More Generative Adversarial Networks (GANs) rely heavily on large-scale training data for training high-quality image generation models. With limited training data, the GAN discriminator often suffers from severe overfitting which directly leads to degraded generation especially in generation diversity. Inspired by the recent advances in knowledge distillation (KD), we propose KD-DLGAN, a knowledge-distillation based generation framework that introduces pre-trained vision-language models for training effective data-limited generation models. KD-DLGAN consists of two innovative designs. The first is aggregated generative KD that mitigates the discriminator overfitting by challenging the discriminator with harder learning tasks and distilling more generalizable knowledge from the pre-trained models. The second is correlated generative KD that improves the generation diversity by distilling and preserving the diverse image-text correlation within the pre-trained models. Extensive experiments over multiple benchmarks show that KD-DLGAN achieves superior image generation with limited training data. In addition, KD-DLGAN complements the state-of-the-art with consistent and substantial performance gains. △ Less

Submitted 30 March, 2023; originally announced March 2023.

Journal ref: CVPR2023

Quadratic Constraints for Local Stability Analysis of Quadratic Systems

Authors: Shih-Chi Liao, Maziar S. Hemati, Peter Seiler

Abstract: This paper proposes new quadratic constraints (QCs) to bound a quadratic polynomial. Such QCs can be used in dissipation ineqaulities to analyze the stability and performance of nonlinear systems with quadratic vector fields. The proposed QCs utilize the sign-indefiniteness of certain classes of quadratic polynomials. These new QCs provide a tight bound on the quadratic terms along specific direct… ▽ More This paper proposes new quadratic constraints (QCs) to bound a quadratic polynomial. Such QCs can be used in dissipation ineqaulities to analyze the stability and performance of nonlinear systems with quadratic vector fields. The proposed QCs utilize the sign-indefiniteness of certain classes of quadratic polynomials. These new QCs provide a tight bound on the quadratic terms along specific directions. This reduces the conservatism of the QC bounds as compared to the QCs in previous work. Two numerical examples of local stability analysis are provided to demonstrate the effectiveness of the proposed QCs. △ Less

Submitted 8 September, 2022; originally announced September 2022.

Comments: 6 pages, 4 figures, to be published in IEEE Conference on Decision and Control 2022

One-step Method for Material Quantitation using In-line Tomography with Single Scanning

Authors: Suyu Liao, Shiwo Deng, Yining Zhu, Huitao Zhang, Pei** Zhu, Kai Zhang, Xing Zhao

Abstract: Objective: Quantitative technique based on In-line phase-contrast computed tomography with single scanning attracts more attention in application due to the flexibility of the implementation. However, the quantitative results usually suffer from artifacts and noise, since the phase retrieval and reconstruction are independent ("two-steps") without feedback from the original data. Our goal is to de… ▽ More Objective: Quantitative technique based on In-line phase-contrast computed tomography with single scanning attracts more attention in application due to the flexibility of the implementation. However, the quantitative results usually suffer from artifacts and noise, since the phase retrieval and reconstruction are independent ("two-steps") without feedback from the original data. Our goal is to develop a method for material quantitative imaging based on a priori information specifically for the single-scanning data. Method: An iterative method that directly reconstructs the refractive index decrement delta and imaginary beta of the object from observed data ("one-step") within single object-to-detector distance (ODD) scanning. Simultaneously, high-quality quantitative reconstruction results are obtained by using a linear approximation that achieves material decomposition in the iterative process. Results: By comparing the equivalent atomic number of the material decomposition results in experiments, the accuracy of the proposed method is greater than 97.2%. Conclusion: The quantitative reconstruction and decomposition results are effectively improved, and there are feedback and corrections during the iteration, which effectively reduce the impact of noise and errors. Significance: This algorithm has the potential for quantitative imaging research, especially for imaging live samples and human breast preclinical studies. △ Less

Submitted 17 April, 2022; originally announced April 2022.

Journal ref: IEEE Transactions on Biomedical Engineering, 2022

Robust Control Barrier Functions with Sector-Bounded Uncertainties

Authors: Jyot Buch, Shih-Chi Liao, Peter Seiler

Abstract: This paper focuses on safety critical control with sector-bounded uncertainties at the plant input. The uncertainties can represent nonlinear and/or time-varying components. We propose a new robust control barrier function (RCBF) approach to enforce safety requirements in the presence of these uncertainties. The primary objective is to minimally alter the given baseline control command to guarante… ▽ More This paper focuses on safety critical control with sector-bounded uncertainties at the plant input. The uncertainties can represent nonlinear and/or time-varying components. We propose a new robust control barrier function (RCBF) approach to enforce safety requirements in the presence of these uncertainties. The primary objective is to minimally alter the given baseline control command to guarantee safety in the presence of modeled uncertainty. The resulting min-norm optimization problem can be recast as a Second-Order Cone Program (SOCP) to enable online implementation. Properties of this controller are studied and a numerical example is provided to illustrate the effectiveness of this approach. △ Less

Submitted 6 September, 2021; originally announced September 2021.

Comments: 7 Pages, 4 Figures, Submitted to LCSS/ACC 2022

Multi-Modal MRI Reconstruction Assisted with Spatial Alignment Network

Authors: Kai Xuan, Lei Xiang, Xiaoqian Huang, Lichi Zhang, Shu Liao, Dinggang Shen, Qian Wang

Abstract: In clinical practice, multi-modal magnetic resonance imaging (MRI) with different contrasts is usually acquired in a single study to assess different properties of the same region of interest in the human body. The whole acquisition process can be accelerated by having one or more modalities under-sampled in the $k$-space. Recent research has shown that, considering the redundancy between differen… ▽ More In clinical practice, multi-modal magnetic resonance imaging (MRI) with different contrasts is usually acquired in a single study to assess different properties of the same region of interest in the human body. The whole acquisition process can be accelerated by having one or more modalities under-sampled in the $k$-space. Recent research has shown that, considering the redundancy between different modalities, a target MRI modality under-sampled in the $k$-space can be more efficiently reconstructed with a fully-sampled reference MRI modality. However, we find that the performance of the aforementioned multi-modal reconstruction can be negatively affected by subtle spatial misalignment between different modalities, which is actually common in clinical practice. In this paper, we improve the quality of multi-modal reconstruction by compensating for such spatial misalignment with a spatial alignment network. First, our spatial alignment network estimates the displacement between the fully-sampled reference and the under-sampled target images, and warps the reference image accordingly. Then, the aligned fully-sampled reference image joins the multi-modal reconstruction of the under-sampled target image. Also, considering the contrast difference between the target and reference images, we have designed a cross-modality-synthesis-based registration loss in combination with the reconstruction loss, to jointly train the spatial alignment network and the reconstruction network. The experiments on both clinical MRI and multi-coil $k$-space raw data demonstrate the superiority and robustness of the multi-modal MRI reconstruction empowered with our spatial alignment network. Our code is publicly available at \url{https://github.com/woxuankai/SpatialAlignmentNetwork}. △ Less

Submitted 2 April, 2022; v1 submitted 12 August, 2021; originally announced August 2021.

Comments: Final version, IEEE Transactions on Medical Imaging, code available at \url{https://github.com/woxuankai/SpatialAlignmentNetwork}

Color-complexity enabled exhaustive color-dots identification and spatial patterns testing in images

Authors: Shuting Liao, Li-Yu Liu, Ting-An Chen, Kuang-Yu Chen, Fushing Hsieh

Abstract: Targeted color-dots with varying shapes and sizes in images are first exhaustively identified, and then their multiscale 2D geometric patterns are extracted for testing spatial uniformness in a progressive fashion. Based on color theory in physics, we develop a new color-identification algorithm relying on highly associative relations among the three color-coordinates: RGB or HSV. Such high associ… ▽ More Targeted color-dots with varying shapes and sizes in images are first exhaustively identified, and then their multiscale 2D geometric patterns are extracted for testing spatial uniformness in a progressive fashion. Based on color theory in physics, we develop a new color-identification algorithm relying on highly associative relations among the three color-coordinates: RGB or HSV. Such high associations critically imply low color-complexity of a color image, and renders potentials of exhaustive identification of targeted color-dots of all shapes and sizes. Via heterogeneous shaded regions and lighting conditions, our algorithm is shown being robust, practical and efficient comparing with the popular Contour and OpenCV approaches. Upon all identified color-pixels, we form color-dots as individually connected networks with shapes and sizes. We construct minimum spanning trees (MST) as spatial geometries of dot-collectives of various size-scales. Given a size-scale, the distribution of distances between immediate neighbors in the observed MST is extracted, so do many simulated MSTs under the spatial uniformness assumption. We devise a new algorithm for testing 2D spatial uniformness based on a Hierarchical clustering tree upon all involving MSTs. Our developments are illustrated on images obtained by mimicking chemical spraying via drone in Precision Agriculture. △ Less

Submitted 28 July, 2020; originally announced July 2020.

Comments: 21 pages, 21 figures

Standoff Through-the-Wall Sensing at Ka-Band Microwave

Authors: S. Liao, T. Elmer, S. Bakhtiari, N. Gopalsami, N. Cox, J. Wiencek, A. C. Raptis

Abstract: Conventional microwave remote sensing/imaging of through-the-wall objects made of different materials is usually performed at frequencies below 3 GHz that provide relatively low spatial resolution. In this paper, we evaluate the ability and sensitivity of high-frequency microwave or millimeter wave standoff sensing of through-the-wall objects to achieve high spatial resolution. The target under st… ▽ More Conventional microwave remote sensing/imaging of through-the-wall objects made of different materials is usually performed at frequencies below 3 GHz that provide relatively low spatial resolution. In this paper, we evaluate the ability and sensitivity of high-frequency microwave or millimeter wave standoff sensing of through-the-wall objects to achieve high spatial resolution. The target under study is a sandwich structure consisting of different object materials placed between two wall blocks. An Agilent PNA-X series (model N5245A) vector network analyzer is used to sweep over the entire Ka-band (26.5 GHz to 40 GHz). The beam is then directed to a standard rectangular horn antenna and collimated by a 6-inch-diameter Gaussian lens towards the sandwich structure (wall block/object/wall block). The reflected electromagnetic wave is picked up by the same system as the complex S-parameter S11. Both amplitude and phase of the reflected signal are used to recognize different materials sandwiched between the cement blocks. The experimental results are compared with the theoretical calculations, which show satisfactory agreement for the cases evaluated in this work. △ Less

Submitted 12 July, 2020; originally announced July 2020.

Comments: 15 pages, 7 figures, more references added to a paper to Materials Evaluation

Journal ref: Materials Evaluation, American Society of Nondestructive Testing, vol. 70, no. 10, pp. 1136-1145, Oct. 2012

Ultra-sensitive Parity-Time Symmetry based Graphene FET (PTS-GFET) Sensors

Authors: Lu Ou, Shaolin Liao

Abstract: A novel ultra-sensitive Parity-Time symmetry based Graphene FET (PTS-GFET) sensor is studied for gas concentration detection. The PTS-GFET sensor effectively integrates the sensitivity of the PT symmetry around its Exceptional Point (EP) and the tunability of the GFET conductance. The change of GFET conductance with the gas concentration can be brought back to the EP of the PTS-GFET by tuning the… ▽ More A novel ultra-sensitive Parity-Time symmetry based Graphene FET (PTS-GFET) sensor is studied for gas concentration detection. The PTS-GFET sensor effectively integrates the sensitivity of the PT symmetry around its Exceptional Point (EP) and the tunability of the GFET conductance. The change of GFET conductance with the gas concentration can be brought back to the EP of the PTS-GFET by tuning the gate voltage on the GFET. Thus, the applied gate voltage indicates the gas concentration. The minimum detectable gas concentration has been derived and estimated based on the experimental data, which shows that PTS-GFET can detect gas concentration below 50 ppb. △ Less

Submitted 9 July, 2020; originally announced July 2020.

Comments: 4 pages, 2 figures. Preprint of a paper to be submitted to 2020 Asia-Pacific Microwave Conference (APMC2020), Hong Kong, 8-11 December, 2020

High-speed Millimeter-wave 5G/6G Image Transmission via Artificial Intelligence

Authors: Shaolin Liao, Lu Ou

Abstract: Artificial Intelligence (AI) has been used to jointly optimize a mmWave Compressed Sensing (CS) for high-speed 5G/6G image transmission. Specifically, we have developed a Dictionary Learning Compressed Sensing neural Network (DL-CSNet) to realize three key functionalities: 1) to learn the dictionary basis of the images for transmission; 2) to optimize the Hadamard measurement matrix; and 3) to rec… ▽ More Artificial Intelligence (AI) has been used to jointly optimize a mmWave Compressed Sensing (CS) for high-speed 5G/6G image transmission. Specifically, we have developed a Dictionary Learning Compressed Sensing neural Network (DL-CSNet) to realize three key functionalities: 1) to learn the dictionary basis of the images for transmission; 2) to optimize the Hadamard measurement matrix; and 3) to reconstruct the lossless images with the learned dictionary basis. A 94-GHz prototype has been built and up to one order of image transmission speed increase has been realized for letters ``A" to ``Z". △ Less

Submitted 6 July, 2020; originally announced July 2020.

Comments: 3 pages, 2 figures, preprint to be submitted to the 2020 Asia-Pacific Microwave Conference (APMC2020), Hong Kong SAR, PR China, 8-11 December, 2020

Fast Computation of Electromagnetic Wave Propagation and Scattering for Quasi-cylindrical Geometry

Authors: Shaolin Liao

Abstract: The cylindrical Taylor Interpolation through FFT (TI-FFT) algorithm for computation of the near-field and far-field in the quasi-cylindrical geometry has been introduced. The modal expansion coefficient of the vector potentials ${\bf F}$ and ${\bf A}$ within the context of the cylindrical harmonics (TE and TM modes) can be expressed in the closed-form expression through the cylindrical addition th… ▽ More The cylindrical Taylor Interpolation through FFT (TI-FFT) algorithm for computation of the near-field and far-field in the quasi-cylindrical geometry has been introduced. The modal expansion coefficient of the vector potentials ${\bf F}$ and ${\bf A}$ within the context of the cylindrical harmonics (TE and TM modes) can be expressed in the closed-form expression through the cylindrical addition theorem. For the quasi-cylindrical geometry, the modal expansion coefficient can be evaluated through FFT with the help of the Taylor Interpolation (TI) technique. The near-field on any arbitrary cylindrical surface can be obtained through the Inverse Fourier Transform (IFT). The far-field can be obtained through the Near-Field Far-Field (NF-FF) transform. The cylindrical TI-FFT algorithm has the advantages of $\mathcal{O} \left( \hbox{N} \log_2 \hbox{N} \right)$ computational complexity for $\hbox{N} = \hbox{N}_φ\times \hbox{N}_z$ computational grid, small sampling rate (large sampling spacing) and no singularity problem. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: 6 pages, 5 figures

Journal ref: PIERRS, vol. 3, no. 1, pp. 96-100, 2007

Rigorous Quantum Formulation of Parity-Time Symmetric Coupled Resonators

Authors: Shaolin Liao, Lu Ou

Abstract: Rigorous quantum formulation of the Parity-Time (PT) symmetry phenomenon in the RF/microwave regime for a coupled coil resonators with lump elements has been presented. The coil resonator is described by the lump-element model that consists of an inductor (L), a resistor (R) and a capacitor (C). Rigorous quantum Hamiltonian for the coupled LRC coil resonators system has been derived through twice… ▽ More Rigorous quantum formulation of the Parity-Time (PT) symmetry phenomenon in the RF/microwave regime for a coupled coil resonators with lump elements has been presented. The coil resonator is described by the lump-element model that consists of an inductor (L), a resistor (R) and a capacitor (C). Rigorous quantum Hamiltonian for the coupled LRC coil resonators system has been derived through twice basis transforms of the original basis. The first basis transform rotates the original basis such that off-diagonal terms of the governing matrix of the equation system of the coupled coil resonators reduces to constants. Then a second basis transform obtains the quantum Hamiltonian, including the diagonal effective complex frequencies and the off-diagonal coupling terms, together with the transformed basis. With the obtain quantum Hamiltonian, the eigenvalues and eigenvectors of the coupled coil resonators can be obtained as usual as the quantum Hamiltonian. Finally, numerical simulation verifies the correctness of the theory. The quantum formulation of the coupled coil resonators can provide better guideline to design a better PT-symmetric system. △ Less

Submitted 2 July, 2020; originally announced July 2020.

Comments: 10 pages, 2 figures, preprint of a paper submitted to PIER B (http://www.jpier.org/PIERB/), July 2, 2020

Millimeter Wave Doppler Sensor for Nondestructive Evaluation of Materials

Authors: S. Liao, S. Bakhtiari, T. Elmer, B. Lawrence, E. R. Koehl, N. Gopalsami, A. Raptis

Abstract: Resonance modes are intrinsic characteristics of objects when excited at those frequencies. Probing the resonance signatures can reveal useful information about material composition, geometry, presence of defects, and other characteristics of the object under test. Vibration spectra can be measured remotely with high degree of sensitivity using a millimeter wave (mmW) Doppler sensor and a remote e… ▽ More Resonance modes are intrinsic characteristics of objects when excited at those frequencies. Probing the resonance signatures can reveal useful information about material composition, geometry, presence of defects, and other characteristics of the object under test. Vibration spectra can be measured remotely with high degree of sensitivity using a millimeter wave (mmW) Doppler sensor and a remote excitation source. This novel nondestructive evaluation (NDE) method can work in a non-contact manner as an alternative or complementary approach to conventional NDE methods such as those based on acoustic/ultrasonic and optical techniques. Millimeter wave vibrometry can be used for a wide range of civil and national security applications. Examples include detection of defects and degradation for diagnostics and prognostics of materials components and rapid standoff inspection of shielded/sealed containers for contraband. In this paper, we evaluate the performance of a compact mmW vibrometer developed at Argonne. Our 94 GHz I-Q Doppler sensor monitors the mechanical vibration signature of the object under interrogation that is induced by continuous wave excitation. For proof-of-principle demonstrations, the test objects were mechanically excited by an electronically controlled shaker using sinusoidal waves at various frequencies ranging from DC to 200 Hz. We will present a number of laboratory test results and will discuss the method's applicability to some practical NDE applications. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: 10 pages, 10 figures

Journal ref: 21st Annual Research Symposium and Spring Conference 2012, Dallas, TX USA, 2012

Ultrasonic and Electromagnetic Sensors for Downhole Reservoir Characterization

Authors: K. Wang, H. T. Chien, S. Liao, L. P. Yuan, S. H. Sheen, S. Bakhtiari, A. C. Raptis

Abstract: The current work covers the evaluation of ultrasonic and electromagnetic (EM) techniques applied to temperature measurement and flow characterization for Enhanced Geothermal System (EGS). We have evaluated both ultrasonic techniques and microwave radiometry for temperature gradient and profile measurements. A waveguide-based ultrasonic probe was developed to measure the temperature gradient. A sta… ▽ More The current work covers the evaluation of ultrasonic and electromagnetic (EM) techniques applied to temperature measurement and flow characterization for Enhanced Geothermal System (EGS). We have evaluated both ultrasonic techniques and microwave radiometry for temperature gradient and profile measurements. A waveguide-based ultrasonic probe was developed to measure the temperature gradient. A statistic approach on estimating the average grain size via spectral analysis of the scattered ultrasonic signals is introduced. For directional temperature measurement, different microwave antenna designs are compared numerically and an array loop antenna design is selected for further development. Finally techniques to characterize the porosity and permeability of a hot dry rock resource are presented. △ Less

Submitted 30 June, 2020; originally announced July 2020.

Comments: 7 pages, 5 figures

Journal ref: PROCEEDINGS, Thirty-Sixth Workshop on Geothermal Reservoir Engineering Stanford University, Stanford, California, January 31 - February 2, 2011 SGP-TR-191

Control and Readout Software in Superconducting Quantum Computing

Authors: Cheng Guo, FuTian Liang, ** Lin, Yu Xu, LiHua Sun, ShengKai Liao, ChengZhi Peng, WeiYue Liu

Abstract: Digital-to-analog converter (DAC) and analog-to-digital converter (ADC) as an important part of the superconducting quantum computer are used to control and readout the qubit states. The complexity of instrument manipulation increases rapidly as the number of qubits grows. Low-speed data transmission, imperfections of realistic instruments and coherent control of qubits are gradually highlighted w… ▽ More Digital-to-analog converter (DAC) and analog-to-digital converter (ADC) as an important part of the superconducting quantum computer are used to control and readout the qubit states. The complexity of instrument manipulation increases rapidly as the number of qubits grows. Low-speed data transmission, imperfections of realistic instruments and coherent control of qubits are gradually highlighted which have become the bottlenecks in scaling up the number of qubits. To deal with the challenges, we present a solution in this study. Based on client-server (C/S) model, we develop two servers called Readout Server and Control Server for managing self-innovation digitizer, arbitrary waveform generator (AWG) and ultra-precision DC source which enable to implement physical experiments rapidly. Both Control Server and Readout Server consist three parts: resource manager, waveform engine and communication interface. The resource manager maps the resources of separate instruments to a unified virtual instrument and automatically aligns the timing of waveform channels. The waveform engine generates and processes the waveform for AWGs or captures and analyzes the data from digitizers. The communication interface is responsible for sending and receiving data in an efficient manner. We design a simple data link protocol for digitizers and a multi-threaded communication mechanism for AWGs. By using different network optimization strategies, both data transmission speed of digitizers and AWGs reach hundreds of Mbps through a single Gigabit-NIC. △ Less

Submitted 11 June, 2018; originally announced June 2018.

Comments: 4 pages, 7 figures, 1 table

Scalable Self-Adaptive Synchronous Triggering System in Superconducting Quantum Computing

Authors: Li-Hua Sun, Fu-Tian Liang, ** Lin, Cheng Guo, Yu Xu, Sheng-Kai Liao, Cheng-Zhi Peng

Abstract: Superconducting quantum computers (SQC) can solve some specific problems which are deeply believed to be intractable for classical computers. The control and measurement of qubits can't go on without the synchronous operation of digital-to-analog converters (DAC) array and the controlled sampling of analog-to-digital converters (ADC). In this paper, a scalable self-adaptive synchronous triggering… ▽ More Superconducting quantum computers (SQC) can solve some specific problems which are deeply believed to be intractable for classical computers. The control and measurement of qubits can't go on without the synchronous operation of digital-to-analog converters (DAC) array and the controlled sampling of analog-to-digital converters (ADC). In this paper, a scalable self-adaptive synchronous triggering system is proposed to ensure the synchronized operation of multiple qubits. The skew of the control signal between different qubits is less than 25 ps. After upgrading the clock design, the 250 MHz single-tone phase noise of DAC has been increased about 15 dB. The phase noise of the 6.25 GHz qubit control signal has an improvement of about 6 dB. △ Less

Submitted 10 June, 2018; originally announced June 2018.

Comments: 5 pages, 12 figures, IEEE Real Time Conference

Technique of active phase stabilization for the interferometer with 128 actively selectable paths

Authors: Yu Xu, ** Lin, Yu-Huai Li, Hui Dai, Sheng-Kai Liao, Cheng-Zhi Peng

Abstract: A variable-delay optical interferometer with 128 actively selectable delays and a technique of active phase stabilization are innovatively designed and applied for the first time in the experiment of round-robin differential phase shift quantum key distribution (RRDPS-QKD). According to the RRDPS protocol, larger number of delay channels in interferometer can ensure higher tolerance of bit errors,… ▽ More A variable-delay optical interferometer with 128 actively selectable delays and a technique of active phase stabilization are innovatively designed and applied for the first time in the experiment of round-robin differential phase shift quantum key distribution (RRDPS-QKD). According to the RRDPS protocol, larger number of delay channels in interferometer can ensure higher tolerance of bit errors, eliminating the fundamental threshold of bit error rate of 11% of traditional BB84 protocol. Considering that the implementation of RRDPS protocol relys on the realizaiton of the interferometer, therefore, an interferometer with 128 selectable delay paths is constructed and demands the ability of fast switching at the rate of 10 kHz, which requires dynamic stability of multiple paths. Thus, a specific designed phase stabilization technique with closed real time feedback loop is introduced to guarantee the high visibility of interferometer selections dynamically. The active phase stabilization technique employs a phase modulator (PM) driven by a DAC to adjust the relative phase between the two arms of the interferometer. By monitoring photon counting rates of two Up-Conversion Detectors (UCD) at two output ports of the interferometer, a Field Programmable Gate Array (FPGA) calculates and finds the optimal code value for the DAC, maintaining a high visibility of the interferometer every time a new light path is selected. The visibility of most of the 128 interferometer selections can simultaneously be maintained over 96% during the QKD, which lays the foundation for the RRDPS experiment. △ Less

Submitted 10 June, 2018; originally announced June 2018.

Comments: 4 pages, 4 figures, 21st IEEE Real Time Conference

High Performance and Scalable AWG for Superconducting Quantum Computing

Authors: ** Lin, Fu-Tian Liang, Yu Xu, Li-Hua Sun, Cheng Guo, Sheng-Kai Liao, Cheng-Zhi Peng

Abstract: Superconducting quantum computer is manufactured based on semiconductor process which makes qubits integration possible. At the same time, this kind of qubit exhibits high performance fidelity, de-coherence time, scalability and requires a programmable arbitrary waveform generator (AWG). This paper presents implementation of an AWG which composed of two gigabit samples per second (GSPS) sampling r… ▽ More Superconducting quantum computer is manufactured based on semiconductor process which makes qubits integration possible. At the same time, this kind of qubit exhibits high performance fidelity, de-coherence time, scalability and requires a programmable arbitrary waveform generator (AWG). This paper presents implementation of an AWG which composed of two gigabit samples per second (GSPS) sampling rate, 16 bit vertical resolution digital to analog converters (DACs). The AWG integrated with separate microwave devices onto a metal plate for the scale-up consideration. A special waveform sequence output controller is designed to realize seamless waveform switching and arbitrary waveform generator. The jitter in multiple AWG channels is around 10ps, Integral nonlinearity (INL) as well as differential nonlinearity (DNL) is about 2 LSB, and the qubit performance of the de-coherence time (T2*) achieved 33% promotion over that of a commercial 1 GSPS, 14 bit AWG. △ Less

Submitted 10 June, 2018; originally announced June 2018.

Comments: 5 pages,9 figures.21st IEEE Real Time Conference

A 3.8 ps RMS time synchronization implemented in a 20 nm FPGA

Authors: Hong-Bo Xie, Yang Li, Qi Shen, Sheng-Kai Liao, Cheng-Zhi Peng

Abstract: A 3.8ps root mean square (RMS) time synchronization implemented in a 20nm fabrication process ultrascale kintex Field Programmable Gate Array (FPGA) is presented. The multichannel high-speed serial transceivers (e.g. GTH) play a key role in a wide range of applications, such as the optical source for quantum key distribution systems. However, owing to the independent clock dividers existed in each… ▽ More A 3.8ps root mean square (RMS) time synchronization implemented in a 20nm fabrication process ultrascale kintex Field Programmable Gate Array (FPGA) is presented. The multichannel high-speed serial transceivers (e.g. GTH) play a key role in a wide range of applications, such as the optical source for quantum key distribution systems. However, owing to the independent clock dividers existed in each transceiver, the random skew would appear among the multiple channels every time the system powers up or resets. A self-phase alignment method provided by Xilinx Corporation could reach a precision with 22 ps RMS and 100 ps maximum variation, which is far from meeting the demand of applications with rate up to 2.5 Gbps. To implement a high-precision intrachannel time synchronization, a protocol combined of a high-precision time-to-digital converter (TDC) and a tunable phase interpolator (PI) is presented. The TDC based on the carry8 primitive is applied to measure the intrachannel skew with 40.7ps bin size. The embedded tunable PI in each GTH channel has a theoretical step size of 3.125 ps. By tuning the PI in the minimal step size, the final intrachannel time synchronization reaches a 3.8 ps RMS precision and maximal variation 20 ps, much better than the self-phase alignment method. Besides, a desirable time offset of every channel can be implemented with a closed-loop control. △ Less

Submitted 8 June, 2018; originally announced June 2018.

Comments: 4 pages,5 figures.21st IEEE Real Time Conference

Optimal Control Theory in Intelligent Transportation Systems Research - A Review

Authors: Jimmy SJ. Ren, Wei Wang, Stephen Shaoyi Liao

Abstract: Continuous motorization and urbanization around the globe leads to an expansion of population in major cities. Therefore, ever-growing pressure imposed on the existing mass transit systems calls for a better technology, Intelligent Transportation Systems (ITS), to solve many new and demanding management issues. Many studies in the extant ITS literature attempted to address these issues within whic… ▽ More Continuous motorization and urbanization around the globe leads to an expansion of population in major cities. Therefore, ever-growing pressure imposed on the existing mass transit systems calls for a better technology, Intelligent Transportation Systems (ITS), to solve many new and demanding management issues. Many studies in the extant ITS literature attempted to address these issues within which various research methodologies were adopted. However, there is very few paper summarized what does optimal control theory (OCT), one of the sharpest tools to tackle management issues in engineering, do in solving these issues. It{\textquoteright}s both important and interesting to answer the following two questions. (1) How does OCT contribute to ITS research objectives? (2) What are the research gaps and possible future research directions? We searched 11 top transportation and control journals and reviewed 41 research articles in ITS area in which OCT was used as the main research methodology. We categorized the articles by four different ways to address our research questions. We can conclude from the review that OCT is widely used to address various aspects of management issues in ITS within which a large portion of the studies aimed to reduce traffic congestion. We also critically discussed these studies and pointed out some possible future research directions towards which OCT can be used. △ Less

Submitted 13 April, 2013; originally announced April 2013.