-
Grid-Forming Loads: Can the loads be in charge of forming the grid in modern power systems?
Authors:
Oriol Gomis-Bellmunt,
Saman Dadjo Tavakoli,
Vinicius A. Lacerda,
Eduardo Prieto-Araujo
Abstract:
Modern power systems are facing the tremendous challenge of integrating vast amounts of variable (non-dispatchable) renewable generation capacity, such as solar photovoltaic or wind power. In this context, the required power system flexibility needs to be allocated in other units that can include energy storage, demand management or providing reserve from renewables curtailing the output power. Th…
▽ More
Modern power systems are facing the tremendous challenge of integrating vast amounts of variable (non-dispatchable) renewable generation capacity, such as solar photovoltaic or wind power. In this context, the required power system flexibility needs to be allocated in other units that can include energy storage, demand management or providing reserve from renewables curtailing the output power. The present paper proposes the new concept of grid-forming load, which can be considered a totally flexible concept of demand. The concept is not only ensuring the load is supporting the grid stability by adapting the load to the overall system balancing, but also ensures that the load is actually contributing to form the grid and to provide synchronization power to the overall system. In this sense, the new concept allows running a system powered only by renewables operating at maximum power (or operator defined set-point) in grid-following mode, while the overall system control is ubicated in the demand side. This is an important change of paradigm as it considers that all the flexibility, synchronism and stability provision is on the demand side. This concept can applied either to isolated systems or also to future power systems, where millions of loads steer the power system while the renewables are operating at full power. The paper proposes the concept, suggests possible control implementations of the grid-forming load and analyses the concept in four simulation case studies.
△ Less
Submitted 27 August, 2022;
originally announced August 2022.
-
Definition of scenarios for modern power systems with a high renewable energy share
Authors:
Carlos Collados-Rodríguez,
Eduard Antolí-Gil,
Enric Sánchez-Sánchez,
Jaume Girona-Badia,
Vinícius Albernaz Lacerda,
Marc Cheah-Mañe,
Eduardo Prieto-Araujo,
Oriol Gomis-Bellmunt
Abstract:
Recent environmental policies have led many academic, industrial and governmental stakeholders to design and plan scenarios with very high share of renewable energy sources (RES). New system elements such as High-voltage Direct Current (HVDC) transmission, Microgrids, Virtual Power Plants (VPP) and Dynamic Virtual Power Plants (DVPP) are being increasingly studied with respect to their contributio…
▽ More
Recent environmental policies have led many academic, industrial and governmental stakeholders to design and plan scenarios with very high share of renewable energy sources (RES). New system elements such as High-voltage Direct Current (HVDC) transmission, Microgrids, Virtual Power Plants (VPP) and Dynamic Virtual Power Plants (DVPP) are being increasingly studied with respect to their contribution to integrate future RES plants in the main grid. Several future scenarios are being analysed for each system and region, to ensure that the future energy systems, composed mostly of RES, can remain stable, match the demand during the seasonal variations across the year and are economically feasible. In this article, different types of energy scenarios are considered to obtain a range of options in terms of size, renewable generation technologies, and electrical network configuration. The scenarios were studied in the context of the POSYTYF project and were quantified through an optimization-based algorithm, using specific locations in Europe, and real data related to the availability of different RES, as well as the demand. It has been shown that photovoltaic (PV) and wind generation can provide the renewable backbone but they lack the flexibility needed to achieve a very high share in the energy mix. Other technologies, such as solar thermal and pumped hydro, become important to cover the last range of integration, as they provide a high flexibility, which is crucial for high share.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
Modelling Approaches of Power Systems Considering Grid-Connected Converters and Renewable Generation Dynamics
Authors:
Vinícius Albernaz Lacerda,
Jaume Girona-Badia,
Stephan Kusche,
Florian Pöschke,
Eduardo Prieto-Araujo,
Horst Schulte,
Oriol Gomis-Bellmunt
Abstract:
This paper presents a comparative analysis of several modelling approaches of key elements used in simulations of power systems with renewable energy sources. Different models of synchronous generators, transmission lines, converters, wind generators and photovoltaic (PV) power plants are compared to assess the most suitable models for grid-connection studies. It also analyses how the dynamics of…
▽ More
This paper presents a comparative analysis of several modelling approaches of key elements used in simulations of power systems with renewable energy sources. Different models of synchronous generators, transmission lines, converters, wind generators and photovoltaic (PV) power plants are compared to assess the most suitable models for grid-connection studies. It also analyses how the dynamics of PV power plants and the mechanical dynamics of wind generators affect the electrical variables on the grid side. The models were compared in terms of precision and computational time through simulations of load connection, short-circuits, disconnection of generators and lines in a benchmark system modelled in Simulink.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
Modelling and Simulation of Power Systems with Grid-Connected Converters in OpenModelica
Authors:
Lluc Figueras Llerins,
Vinícius Albernaz Lacerda,
Adrien Guironnet,
Quentin Cossart,
Eduardo Prieto-Araujo,
Oriol Gomis-Bellmunt
Abstract:
This paper analyses the capabilities of the OpenModelica environment to perform electromagnetic transient (EMT) type simulations of power transmission systems with grid-connected converters. A power transmission system has been modelled and simulated in OpenModelica and Simulink to compare both tools in terms of accuracy, robustness, flexibility and computational performance. Power system transien…
▽ More
This paper analyses the capabilities of the OpenModelica environment to perform electromagnetic transient (EMT) type simulations of power transmission systems with grid-connected converters. A power transmission system has been modelled and simulated in OpenModelica and Simulink to compare both tools in terms of accuracy, robustness, flexibility and computational performance. Power system transient studies such as faults and switching of capacitor banks have been performed. The results confirmed an excellent overall agreement between both software and demonstrated a remarkable potential for using OpenModelica for EMT-type modelling and simulation of future power electronic dominated grids.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
-
Phasor Modelling Approaches and Simulation Guidelines of Voltage-Source Converters in Grid-Integration Studies
Authors:
Vinícius Albernaz Lacerda,
Eduardo Prieto Araujo,
Marc Cheah-Mañe,
Oriol Gomis-Bellmunt
Abstract:
This paper reviews Voltage-Source Converters (VSCs) EMT and Phasor models currently used to simulate converter-interfaced generation (CIG) and renewable energy resources integration to power systems. Several modelling guidelines and suitability analyses were provided based on a comprehensive comparative study among the models. Various studies were performed in a small system and a large system, mo…
▽ More
This paper reviews Voltage-Source Converters (VSCs) EMT and Phasor models currently used to simulate converter-interfaced generation (CIG) and renewable energy resources integration to power systems. Several modelling guidelines and suitability analyses were provided based on a comprehensive comparative study among the models. Various studies were performed in a small system and a large system, modelled in Simulink. We address a gap related to the suitability of CIGs phasor models in studies where the boundary between electromagnetic and electromechanical transients overlap. An insightful analysis of the adequate simulation time step for each model and study is also provided, along with several simulation guidelines.
△ Less
Submitted 1 December, 2021;
originally announced December 2021.
