-
End-to-End Waveform and Beamforming Optimization for RF Wireless Power Transfer
Authors:
Abdul Basit Khattak,
Onel L. A. López,
Amirhossein Azarbahram,
Deepak Kumar,
Matti Latva-aho
Abstract:
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power ampl…
▽ More
Radio frequency (RF) wireless power transfer (WPT) is a key technology for future low-power wireless systems. However, the inherently low end-to-end power transfer efficiency (PTE) is challenging for practical applications. The main factors contributing to it are the channel losses, transceivers' power consumption, and losses related, e.g., to the digital-to-analog converter (DAC), high-power amplifier, and rectenna. Optimizing PTE requires careful consideration of these factors, motivating the current work. Herein, we consider an analog multi-antenna power transmitter that aims to charge a single energy harvester. We first provide a mathematical framework to calculate the harvested power from multi-tone signal transmissions and the system power consumption. Then, we formulate the joint waveform and analog beamforming design problem to minimize power consumption and meet the charging requirements. Finally, we propose an optimization approach relying on swarm intelligence to solve the specified problem. Simulation results quantify the power consumption reduction as the DAC, phase shifters resolution, and antenna length are increased, while it is seen that increasing system frequency results in higher power consumption.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
A Novel Optimization-Based Collision Avoidance For Autonomous On-Orbit Assembly
Authors:
Siavash Tavana,
Sepideh Faghihi,
Anton de Ruiter,
Krishna Dev Kumar
Abstract:
The collision avoidance constraints are prominent as non-convex, non-differentiable, and challenging when defined in optimization-based motion planning problems. To overcome these issues, this paper presents a novel non-conservative collision avoidance technique using the notion of convex optimization to establish the distance between robotic spacecraft and space structures for autonomous on-orbit…
▽ More
The collision avoidance constraints are prominent as non-convex, non-differentiable, and challenging when defined in optimization-based motion planning problems. To overcome these issues, this paper presents a novel non-conservative collision avoidance technique using the notion of convex optimization to establish the distance between robotic spacecraft and space structures for autonomous on-orbit assembly operations. The proposed technique defines each ellipsoidal- and polyhedral-shaped object as the union of convex compact sets, each represented non-conservatively by a real-valued convex function. Then, the functions are introduced as a set of constraints to a convex optimization problem to produce a new set of differentiable constraints resulting from the optimality conditions. These new constraints are later fed into an optimal control problem to enforce collision avoidance where the motion planning for the autonomous on-orbit assembly takes place. Numerical experiments for two assembly scenarios in tight environments are presented to demonstrate the capability and effectiveness of the proposed technique. The results show that this framework leads to optimal non-conservative trajectories for robotic spacecraft in tight environments. Although developed for autonomous on-orbit assembly, this technique could be used for any generic motion planning problem where collision avoidance is crucial.
△ Less
Submitted 15 April, 2024; v1 submitted 11 April, 2024;
originally announced April 2024.
-
Dynamic Optimization for Monoclonal Antibody Production
Authors:
Morten Wahlgreen Kaysfeld,
Deepak Kumar,
Marcus Krogh Nielsen,
John Bagterp Jørgensen
Abstract:
This paper presents a dynamic optimization numerical case study for Monoclonal Antibody (mAb) production. The fermentation is conducted in a continuous perfusion reactor. We represent the existing model in terms of a general modeling methodology well-suited for simulation and optimization. The model consists of six ordinary differential equations (ODEs) for the non-constant volume and the five com…
▽ More
This paper presents a dynamic optimization numerical case study for Monoclonal Antibody (mAb) production. The fermentation is conducted in a continuous perfusion reactor. We represent the existing model in terms of a general modeling methodology well-suited for simulation and optimization. The model consists of six ordinary differential equations (ODEs) for the non-constant volume and the five components in the reactor. We extend the model with a glucose inhibition term to make the model feasible for optimization case studies. We formulate an optimization problem in terms of an optimal control problem (OCP) and consider four different setups for optimization. Compared to the base case, the optimal operation of the perfusion reactor increases the mAb yield with 44% when samples are taken from the reactor and with 52% without sampling. Additionally, our results show that multiple optimal feeding trajectories exist and that full glucose utilization can be forced without loss of mAb formation.
△ Less
Submitted 28 March, 2023; v1 submitted 20 February, 2023;
originally announced February 2023.
-
Data-driven multi-scale modeling and robust optimization of composite structure with uncertainty quantification
Authors:
Kazuma Kobayashi,
Shoaib Usman,
Carlos Castano,
Dinesh Kumar,
Syed Alam
Abstract:
It is important to accurately model materials' properties at lower length scales (micro-level) while translating the effects to the components and/or system level (macro-level) can significantly reduce the amount of experimentation required to develop new technologies. Robustness analysis of fuel and structural performance for harsh environments (such as power uprated reactor systems or aerospace…
▽ More
It is important to accurately model materials' properties at lower length scales (micro-level) while translating the effects to the components and/or system level (macro-level) can significantly reduce the amount of experimentation required to develop new technologies. Robustness analysis of fuel and structural performance for harsh environments (such as power uprated reactor systems or aerospace applications) using machine learning-based multi-scale modeling and robust optimization under uncertainties are required. The fiber and matrix material characteristics are potential sources of uncertainty at the microscale. The stacking sequence (angles of stacking and thickness of layers) of composite layers causes meso-scale uncertainties. It is also possible for macro-scale uncertainties to arise from system properties, like the load or the initial conditions. This chapter demonstrates advanced data-driven methods and outlines the specific capability that must be developed/added for the multi-scale modeling of advanced composite materials. This chapter proposes a multi-scale modeling method for composite structures based on a finite element method (FEM) simulation driven by surrogate models/emulators based on microstructurally informed meso-scale materials models to study the impact of operational parameters/uncertainties using machine learning approaches. To ensure optimal composite materials, composite properties are optimized with respect to initial materials volume fraction using data-driven numerical algorithms.
△ Less
Submitted 4 November, 2022; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Machine Learning and Artificial Intelligence-Driven Multi-Scale Modeling for High Burnup Accident-Tolerant Fuels for Light Water-Based SMR Applications
Authors:
Md. Shamim Hassan,
Abid Hossain Khan,
Richa Verma,
Dinesh Kumar,
Kazuma Kobayashi,
Shoaib Usman,
Syed Alam
Abstract:
The concept of small modular reactor has changed the outlook for tackling future energy crises. This new reactor technology is very promising considering its lower investment requirements, modularity, design simplicity, and enhanced safety features. The application of artificial intelligence-driven multi-scale modeling (neutronics, thermal hydraulics, fuel performance, etc.) incorporating Digital…
▽ More
The concept of small modular reactor has changed the outlook for tackling future energy crises. This new reactor technology is very promising considering its lower investment requirements, modularity, design simplicity, and enhanced safety features. The application of artificial intelligence-driven multi-scale modeling (neutronics, thermal hydraulics, fuel performance, etc.) incorporating Digital Twin and associated uncertainties in the research of small modular reactors is a recent concept. In this work, a comprehensive study is conducted on the multiscale modeling of accident-tolerant fuels. The application of these fuels in the light water-based small modular reactors is explored. This chapter also focuses on the application of machine learning and artificial intelligence in the design optimization, control, and monitoring of small modular reactors. Finally, a brief assessment of the research gap on the application of artificial intelligence to the development of high burnup composite accident-tolerant fuels is provided. Necessary actions to fulfill these gaps are also discussed.
△ Less
Submitted 25 September, 2022;
originally announced September 2022.
-
Polarization Diversity-enabled LOS/NLOS Identification via Carrier Phase Measurements
Authors:
Onel L. A. López,
Dileep Kumar,
Antti Tölli
Abstract:
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenom…
▽ More
The provision of accurate localization is an increasingly important feature of wireless networks. To this end, a reliable distinction between line-of-sight (LOS) and non-LOS (NLOS) radio links is necessary to avoid degenerative localization estimation biases. Interestingly, LOS and NLOS transmissions affect the polarization of the received signals differently. In this work, we leverage this phenomenon to propose a threshold-based LOS/NLOS classifier exploiting weighted differential carrier phase measurements over a single link with different polarization configurations. Operation in either full or limited polarization diversity systems is possible. We develop a framework for assessing the performance of the proposed classifier, and show through simulations the performance impact of the reflecting materials in NLOS scenarios. For instance, the classifier is far more efficient in NLOS scenarios with wooden reflectors than in those with metallic reflectors. Numerical results evince the potential performance gains from exploiting full polarization diversity, properly weighting the differential carrier phase measurements, and using multi-carrier/tone transmissions. Finally, we show that the optimum decision threshold is inversely proportional to the path power gain in dB, while it does not depend significantly on the material of potential NLOS reflectors.
△ Less
Submitted 15 January, 2023; v1 submitted 31 May, 2022;
originally announced June 2022.
-
Robust deep learning for eye fundus images: Bridging real and synthetic data for enhancing generalization
Authors:
Guilherme C. Oliveira,
Gustavo H. Rosa,
Daniel C. G. Pedronette,
João P. Papa,
Himeesh Kumar,
Leandro A. Passos,
Dinesh Kumar
Abstract:
Deep learning applications for assessing medical images are limited because the datasets are often small and imbalanced. The use of synthetic data has been proposed in the literature, but neither a robust comparison of the different methods nor generalizability has been reported. Our approach integrates a retinal image quality assessment model and StyleGAN2 architecture to enhance Age-related Macu…
▽ More
Deep learning applications for assessing medical images are limited because the datasets are often small and imbalanced. The use of synthetic data has been proposed in the literature, but neither a robust comparison of the different methods nor generalizability has been reported. Our approach integrates a retinal image quality assessment model and StyleGAN2 architecture to enhance Age-related Macular Degeneration (AMD) detection capabilities and improve generalizability. This work compares ten different Generative Adversarial Network (GAN) architectures to generate synthetic eye-fundus images with and without AMD. We combined subsets of three public databases (iChallenge-AMD, ODIR-2019, and RIADD) to form a single training and test set. We employed the STARE dataset for external validation, ensuring a comprehensive assessment of the proposed approach. The results show that StyleGAN2 reached the lowest Frechet Inception Distance (166.17), and clinicians could not accurately differentiate between real and synthetic images. ResNet-18 architecture obtained the best performance with 85% accuracy and outperformed the two human experts (80% and 75%) in detecting AMD fundus images. The accuracy rates were 82.8% for the test set and 81.3% for the STARE dataset, demonstrating the model's generalizability. The proposed methodology for synthetic medical image generation has been validated for robustness and accuracy, with free access to its code for further research and development in this field.
△ Less
Submitted 3 April, 2024; v1 submitted 25 March, 2022;
originally announced March 2022.
-
Latency-Aware Multi-antenna SWIPT System with Battery-Constrained Receivers
Authors:
Dileep Kumar,
Onel L. Alcaraz López,
Satya Krishna Joshi,
Antti Tölli
Abstract:
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. T…
▽ More
Power splitting (PS) based simultaneous wireless information and power transfer (SWIPT) is considered in a multi-user multiple-input-single-output broadcast scenario. Specifically, we focus on jointly configuring the transmit beamforming vectors and receive PS ratios to minimize the total transmit energy of the base station under the user-specific latency and energy harvesting (EH) requirements. The battery depletion phenomenon is avoided by preemptively incorporating information regarding the receivers' battery state and EH fluctuations into the resource allocation design. The resulting time-average sum-power minimization problem is temporally correlated, non-convex (including mutually coupled latency-battery queue dynamics), and in general intractable. We use the Lyapunov optimization framework and derive a dynamic control algorithm to transform the original problem into a sequence of deterministic and independent subproblems, which are then solved via two alternative approaches: i) semidefinite relaxation combined with fractional programming, and ii) successive convex approximation. Furthermore, we design a low-complexity closed-form iterative algorithm exploiting the Karush-Kuhn-Tucker optimality conditions for a specific scenario with delay bounded batteryless receivers. Numerical results provide insights on the robustness of the proposed design to realize an energy-efficient SWIPT system while ensuring latency and EH requirements in a time dynamic mobile access network.
△ Less
Submitted 22 October, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Latency-Constrained Highly-Reliable mmWave Communication via Multi-point Connectivity
Authors:
Dileep Kumar,
Satya Joshi,
Antti Tölli
Abstract:
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user…
▽ More
The sensitivity of millimeter-wave (mmWave) radio channel to blockage is a fundamental challenge in achieving low-latency and ultra-reliable connectivity. In this paper, we explore the viability of using coordinated multi-point (CoMP) transmission for a delay bounded and reliable mmWave communication. We propose a novel blockage-aware algorithm for the sum-power minimization problem under the user-specific latency requirements in a dynamic mobile access network. We use the Lyapunov optimization framework, and provide a dynamic control algorithm, which efficiently transforms a time-average stochastic problem into a sequence of deterministic subproblems. A robust beamformer design is then proposed by exploiting the queue backlogs and channel information, that efficiently allocates the required radio and cooperation resources, and proactively leverages the multi-antenna spatial diversity according to the instantaneous needs of the users. Further, to adapt to the uncertainties of the mmWave channel, we consider a pessimistic estimate of the rates over link blockage combinations and an adaptive selection of the CoMP serving set from the available remote radio units (RRUs). Moreover, after the relaxation of coupled and non-convex constraints via the Fractional Program (FP) techniques, a low-complexity closed-form iterative algorithm is provided by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. The simulation results manifest that, in the presence of random blockages, the proposed methods outperform the baseline scenarios and provide power-efficient, high-reliable, and low-latency mmWave communication.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
LyricJam: A system for generating lyrics for live instrumental music
Authors:
Olga Vechtomova,
Gaurav Sahu,
Dhruv Kumar
Abstract:
We describe a real-time system that receives a live audio stream from a jam session and generates lyric lines that are congruent with the live music being played. Two novel approaches are proposed to align the learned latent spaces of audio and text representations that allow the system to generate novel lyric lines matching live instrumental music. One approach is based on adversarial alignment o…
▽ More
We describe a real-time system that receives a live audio stream from a jam session and generates lyric lines that are congruent with the live music being played. Two novel approaches are proposed to align the learned latent spaces of audio and text representations that allow the system to generate novel lyric lines matching live instrumental music. One approach is based on adversarial alignment of latent representations of audio and lyrics, while the other approach learns to transfer the topology from the music latent space to the lyric latent space. A user study with music artists using the system showed that the system was useful not only in lyric composition, but also encouraged the artists to improvise and find new musical expressions. Another user study demonstrated that users preferred the lines generated using the proposed methods to the lines generated by a baseline model.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
QUARC: Quaternion Multi-Modal Fusion Architecture For Hate Speech Classification
Authors:
Deepak Kumar,
Nalin Kumar,
Subhankar Mishra
Abstract:
Hate speech, quite common in the age of social media, at times harmless but can also cause mental trauma to someone or even riots in communities. Image of a religious symbol with derogatory comment or video of a man abusing a particular community, all become hate speech with its every modality (such as text, image, and audio) contributing towards it. Models based on a particular modality of hate s…
▽ More
Hate speech, quite common in the age of social media, at times harmless but can also cause mental trauma to someone or even riots in communities. Image of a religious symbol with derogatory comment or video of a man abusing a particular community, all become hate speech with its every modality (such as text, image, and audio) contributing towards it. Models based on a particular modality of hate speech post on social media are not useful, rather, we need models like multi-modal fusion models that consider both image and text while classifying hate speech. Text-image fusion models are heavily parameterized, hence we propose a quaternion neural network-based model having additional fusion components for each pair of modalities. The model is tested on the MMHS150K twitter dataset for hate speech classification. The model shows an almost 75% reduction in parameters and also benefits us in terms of storage space and training time while being at par in terms of performance as compared to its real counterpart.
△ Less
Submitted 15 December, 2020;
originally announced December 2020.
-
Complementary Capabilities of Photoacoustic Imaging to Existing Optical Ocular Imaging Techniques
Authors:
Dipen Kumar,
Anju Goyal,
Alan Truhan,
Gary Abrams,
Rayyan Manwar
Abstract:
In this chapter, we will give a brief overview of fundus photography, SLO, and OCT while discussing photoacoustic imaging potential as the next major ocular imaging modality.
In this chapter, we will give a brief overview of fundus photography, SLO, and OCT while discussing photoacoustic imaging potential as the next major ocular imaging modality.
△ Less
Submitted 9 December, 2020; v1 submitted 7 December, 2020;
originally announced December 2020.
-
Fast automatic segmentation of thalamic nuclei from MP2RAGE acquisition at 7 Tesla
Authors:
Ritobrato Datta,
Micky K. Bacchus,
Dushyant Kumar,
Mark A. Elliott,
Aditya Rao,
Sudipto Dolui,
Ravinder Reddy,
Brenda L Banwell,
Manojkumar Saranathan
Abstract:
Purpose: Thalamic nuclei are largely invisible in conventional MRI due to poor contrast. Thalamus Optimized Multi-Atlas Segmentation (THOMAS) provides automatic segmentation of 12 thalamic nuclei using white-matter-nulled (WMn) MPRAGE sequence at 7T. Application of THOMAS to Magnetization Prepared 2 Rapid Gradient Echo (MP2RAGE) sequence acquired at 7T has been investigated in this study.
Method…
▽ More
Purpose: Thalamic nuclei are largely invisible in conventional MRI due to poor contrast. Thalamus Optimized Multi-Atlas Segmentation (THOMAS) provides automatic segmentation of 12 thalamic nuclei using white-matter-nulled (WMn) MPRAGE sequence at 7T. Application of THOMAS to Magnetization Prepared 2 Rapid Gradient Echo (MP2RAGE) sequence acquired at 7T has been investigated in this study.
Methods: 8 healthy volunteers and 5 pediatric-onset multiple sclerosis patients were recruited at the Children's Hospital of Philadelphia and scanned at Siemens 7T with WMn-MPRAGE and multi-echo MP2RAGE (ME-MP2RAGE) sequences. White-matter-nulled contrast was synthesized (MP2-SYN) from T1 maps from ME-MP2RAGE sequence. Thalamic nuclei were segmented using THOMAS joint label fusion algorithm from WMn-MPRAGE and MP2-SYN datasets. THOMAS pipeline was modified to use majority voting to segment the bias corrected MP2-UNI images. Thalamic nuclei from MP2-SYN and MP2-UNI images were evaluated against corresponding nuclei obtained from WMn-MPRAGE images using dice coefficients, volume similarity indices (VSI) and distance between centroids.
Results: For MP2-SYN, dice > 0.85 and VSI > 0.95 was achieved for the 5 larger nuclei and dice > 0.6 and VSI > 0.7 was achieved for the 7 smaller nuclei. The dice and VSI were slightly higher whilst the distance between centroids were smaller for MP2-SYN compared to MP2-UNI, indicating improved performance using the synthesized WMn image.
Discussion: THOMAS algorithm can successfully segment thalamic nuclei in routinely acquired bias-free MP2RAGE images with essentially equivalent quality when evaluated against WMn-MPRAGE, hence has wider applicability in studies focused on thalamic involvement in aging and disease.
△ Less
Submitted 27 June, 2020;
originally announced June 2020.
-
Intracranial Hemorrhage Detection Using Neural Network Based Methods With Federated Learning
Authors:
Utkarsh Chandra Srivastava,
Anshuman Singh,
Dr. K. Sree Kumar
Abstract:
Intracranial hemorrhage, bleeding that occurs inside the cranium, is a serious health problem requiring rapid and often intensive medical treatment. Such a condition is traditionally diagnosed by highly-trained specialists analyzing computed tomography (CT) scan of the patient and identifying the location and type of hemorrhage if one exists. We propose a neural network approach to find and classi…
▽ More
Intracranial hemorrhage, bleeding that occurs inside the cranium, is a serious health problem requiring rapid and often intensive medical treatment. Such a condition is traditionally diagnosed by highly-trained specialists analyzing computed tomography (CT) scan of the patient and identifying the location and type of hemorrhage if one exists. We propose a neural network approach to find and classify the condition based upon the CT scan. The model architecture implements a time distributed convolutional network. We observed accuracy above 92% from such an architecture, provided enough data. We propose further extensions to our approach involving the deployment of federated learning. This would be helpful in pooling learned parameters without violating the inherent privacy of the data involved.
△ Less
Submitted 17 March, 2022; v1 submitted 10 May, 2020;
originally announced May 2020.
-
Blockage-aware Reliable mmWave Access via Coordinated Multi-point Connectivity
Authors:
Dileep Kumar,
Jarkko Kaleva,
Antti Tölli
Abstract:
The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication…
▽ More
The fundamental challenge of the millimeter-wave (mmWave) frequency band is the sensitivity of the radio channel to blockages, which gives rise to unstable connectivity and impacts the reliability of a system. To this end, multi-point connectivity is a promising approach for ensuring the desired rate and reliability requirements. A robust beamformer design is proposed to improve the communication reliability by exploiting the spatial macro-diversity and a pessimistic estimate of rates over potential link blockage combinations. Specifically, we provide a blockage-aware algorithm for the weighted sum-rate maximization (WSRM) problem with parallel beamformer processing across distributed remote radio units (RRUs). Combinations of non-convex and coupled constraints are handled via successive convex approximation (SCA) framework, which admits a closed-form solution for each SCA step, by solving a system of Karush-Kuhn-Tucker (KKT) optimality conditions. Unlike the conventional coordinated multi-point (CoMP) schemes, the proposed blockage-aware beamformer design has, per-iteration, computational complexity in the order of RRU antennas instead of system-wide joint transmit antennas. This leads to a practical and computationally efficient implementation that is scalable to any arbitrary multi-point configuration. In the presence of random blockages, the proposed schemes are shown to significantly outperform baseline scenarios and result in reliable mmWave communication.
△ Less
Submitted 13 February, 2021; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Deep Barcodes for Fast Retrieval of Histopathology Scans
Authors:
Meghana Dinesh Kumar,
Morteza Babaie,
Hamid Tizhoosh
Abstract:
We investigate the concept of deep barcodes and propose two methods to generate them in order to expedite the process of classification and retrieval of histopathology images. Since binary search is computationally less expensive, in terms of both speed and storage, deep barcodes could be useful when dealing with big data retrieval. Our experiments use the dataset Kimia Path24 to test three pre-tr…
▽ More
We investigate the concept of deep barcodes and propose two methods to generate them in order to expedite the process of classification and retrieval of histopathology images. Since binary search is computationally less expensive, in terms of both speed and storage, deep barcodes could be useful when dealing with big data retrieval. Our experiments use the dataset Kimia Path24 to test three pre-trained networks for image retrieval. The dataset consists of 27,055 training images in 24 different classes with large variability, and 1,325 test images for testing. Apart from the high-speed and efficiency, results show a surprising retrieval accuracy of 71.62% for deep barcodes, as compared to 68.91% for deep features and 68.53% for compressed deep features.
△ Less
Submitted 30 April, 2018;
originally announced May 2018.
-
Design of Automated Dual Band 4G Jammer using MATLAB Simulink
Authors:
Tutika Chetan Sai,
G. Dinesh Kumar,
V. Charan,
S. Ramya
Abstract:
This paper presents a design of efficient smart jammer to jam the 4G signals, specifically band 3 and band 40 which can be predominantly used in India. The MATLAB Simulink tool was used for the analysis of the circuit design. Simulink, an advanced tool gives accurate results comparable to real-time analysis. The DSP toolbox of the Simulink library has been largely used to construct and view the re…
▽ More
This paper presents a design of efficient smart jammer to jam the 4G signals, specifically band 3 and band 40 which can be predominantly used in India. The MATLAB Simulink tool was used for the analysis of the circuit design. Simulink, an advanced tool gives accurate results comparable to real-time analysis. The DSP toolbox of the Simulink library has been largely used to construct and view the results of the model. The main objective of this paper is to receive the LTE signals, filter band 3 and band 40, add noise and increase the amplitude of the signal. The uniqueness of this design is the use of full wave rectifier in the circuit and the trigger enabled blocks. Full wave rectifier with added circuitry acts as a trigger to the jammer which contains the noise block and the gain block. Sine wave generators were used to replicate real-time signals and additional signals were added as noise. The advantage of the design is when none of the bands are detected, the output will not be generated, thus saving power. The incorporation of the detector circuit and trigger circuit ensures that power is not wasted by the jamming circuit when the signal is not detected. These jammers can be used in examination halls, conference halls and in secure location where telecommunication signals are unwanted.
△ Less
Submitted 3 March, 2018;
originally announced March 2018.
-
Performance analysis of FSO using relays and spatial diversity under log-normal fading channel
Authors:
Pranav Kumar Jha,
Nitin Kachare,
K Kalyani,
D. Sriram Kumar
Abstract:
The performance analysis of free space optical communication (FSO) system using relays and spatial diversity at the source is studied in this paper. The effect of atmospheric turbulence and attenuation, caused by different weather conditions and geometric losses, has also been considered for analysis. The exact closed-form expressions are presented for bit error rate (BER) of M-ary quadrature ampl…
▽ More
The performance analysis of free space optical communication (FSO) system using relays and spatial diversity at the source is studied in this paper. The effect of atmospheric turbulence and attenuation, caused by different weather conditions and geometric losses, has also been considered for analysis. The exact closed-form expressions are presented for bit error rate (BER) of M-ary quadrature amplitude modulation (M-QAM) technique for multi-hop multiple-input single-output (MISO) FSO system under log-normal fading channel. Furthermore, the link performance of multi-hop MISO and multi-hop single-input and single-output (SISO) FSO systems are compared to the different systems using on-off keying (OOK), repetition codes (RCs) and M-ary pulse amplitude modulation (M-PAM) techniques. A significant performance enhancement in terms of BER analysis and SNR gains is shown for multi-hop MISO and multi-hop SISO FSO systems with M-QAM over other existing systems with different modulation schemes. Moreover, Monte-Carlo simulations are used to validate the accuracy and consistency of the derived analytical results. Numerical results show that M-QAM modulated multi-hop MISO and multi-hop SISO FSO system with relays and spatial diversity outperforms other systems while having the same spectral efficiency of each system.
△ Less
Submitted 31 March, 2018; v1 submitted 2 October, 2017;
originally announced October 2017.
-
An Opportunistic-Non Orthogonal Multiple Access based Cooperative Relaying system over Rician Fading Channels
Authors:
Pranav Kumar Jha,
S Sushmitha Shree,
D. Sriram Kumar
Abstract:
Non-orthogonal Multiple Access (NOMA) has become a salient technology for improving the spectral efficiency of the next generation 5G wireless communication networks. In this paper, the achievable average rate of an Opportunistic Non-Orthogonal Multiple Access (O-NOMA) based Cooperative Relaying System (CRS) is studied under Rician fading channels with Channel State Information (CSI) available at…
▽ More
Non-orthogonal Multiple Access (NOMA) has become a salient technology for improving the spectral efficiency of the next generation 5G wireless communication networks. In this paper, the achievable average rate of an Opportunistic Non-Orthogonal Multiple Access (O-NOMA) based Cooperative Relaying System (CRS) is studied under Rician fading channels with Channel State Information (CSI) available at the source terminal. Based on CSI, for opportunistic transmission, the source immediately chooses either the direct transmission or the cooperative NOMA transmission using the relay, which can provide better achievable average rate performance than the existing Conventional-NOMA (C-NOMA) based CRS with no CSI at the source node. Furthermore, a mathematical expression is also derived for the achievable average rate and the results are compared with C-NOMA based CRS with no CSI at the transmitter end, over a range of increasing power allocation coefficients, transmit Signal-to-Noise Ratios (SNRs) and average channel powers. Numerical results show that the CRS using O-NOMA with CSI achieves better spectral efficiency in terms of the achievable average rate than the Conventional-NOMA based CRS without CSI. To check the consistency of the derived analytical results, Monte Carlo simulations are performed which verify that the results are consistent and matched well with the simulation results.
△ Less
Submitted 15 January, 2018; v1 submitted 29 September, 2017;
originally announced September 2017.
