-
Characterization of Spatial-Temporal Channel Statistics from Indoor Measurement Data at D Band
Authors:
Chathuri Weragama,
Joonas Kokkoniemi,
Mar Francis De Guzman,
Katsuyuki Haneda,
Pekka Kyosti,
Markku Juntti
Abstract:
Millimeter-wave (mmWave) and D Band (110--170~GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond, owing to their ability to enhance performance metrics such as capacity, ultra-low latency, and spectral efficiency. This paper concentrates on deriving statistical insights into power, delay, and the number of paths based on measurements c…
▽ More
Millimeter-wave (mmWave) and D Band (110--170~GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond, owing to their ability to enhance performance metrics such as capacity, ultra-low latency, and spectral efficiency. This paper concentrates on deriving statistical insights into power, delay, and the number of paths based on measurements conducted across four distinct locations at a center frequency of 143.1 GHz. The findings underscore the suitability of various distributions in characterizing power behavior in line-of-sight (LOS) scenarios, including lognormal, Nakagami, gamma, and beta distributions, whereas the loglogistic distribution gives the optimal fit for power distribution in non-line-of-sight (NLOS) scenarios. Moreover, the exponential distribution shows to be the most appropriate model for the delay distribution in both LOS and NLOS scenarios. In terms of the number of paths, observations indicate a tendency for the highest concentration within the 10 m to 30 m distance range between the transmitter (Tx) and receiver (Rx). These insights shed light on the statistical nature of D band propagation characteristics, which are vital for informing the design and optimization of future 6G communication systems
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Beyond 5G RIS mmWave Systems: Where Communication and Localization Meet
Authors:
Jiguang He,
Fan Jiang,
Kamran Keykhosravi,
Joonas Kokkoniemi,
Henk Wymeersch,
Markku Juntti
Abstract:
Upcoming beyond fifth generation (5G) communications systems aim at further enhancing key performance indicators and fully supporting brand new use cases by embracing emerging techniques, e.g., reconfigurable intelligent surface (RIS), integrated communication, localization, and sensing, and mmWave/THz communications. The wireless intelligence empowered by state-of-the-art artificial intelligence…
▽ More
Upcoming beyond fifth generation (5G) communications systems aim at further enhancing key performance indicators and fully supporting brand new use cases by embracing emerging techniques, e.g., reconfigurable intelligent surface (RIS), integrated communication, localization, and sensing, and mmWave/THz communications. The wireless intelligence empowered by state-of-the-art artificial intelligence techniques has been widely considered at the transceivers, and now the paradigm is deemed to be shifted to the smart control of radio propagation environment by virtue of RISs. In this article, we argue that to harness the full potential of RISs, localization and communication must be tightly coupled. This is in sharp contrast to 5G and earlier generations, where localization was a minor additional service. To support this, we first introduce the fundamentals of RIS mmWave channel modeling, followed by RIS channel state information acquisition and link establishment. Then, we deal with the connection between localization and communications, from a separate and joint perspective.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Stochastic Geometry based Interference Analysis of Multiuser mmWave Networks with RIS
Authors:
Joonas Kokkoniemi,
Markku Juntti
Abstract:
In this paper, we utilize tools from stochastic geometry to estimate the interference propagation via reconfigurable intelligent surface (RIS) in the millimeter wave (mmWave, 30-300 GHz) band and specifically on the D band (110-170 GHz). The RISs have been of great interest lately to maximize the channel gains in non-line-of-sight (NLOS) communication situations. We derive expressions for stochast…
▽ More
In this paper, we utilize tools from stochastic geometry to estimate the interference propagation via reconfigurable intelligent surface (RIS) in the millimeter wave (mmWave, 30-300 GHz) band and specifically on the D band (110-170 GHz). The RISs have been of great interest lately to maximize the channel gains in non-line-of-sight (NLOS) communication situations. We derive expressions for stochastic interference level in RIS powered systems and validate those with simulations. It will be shown that the interference levels via RIS link are rather small compared to the designed RIS link or the LOS interference as the random interference loses significant part of the RIS gain. We also analyse the validity of far field channel and antenna gains in the near field of a large array. It is shown that, while the high frequency systems require large arrays that push the far field far away from the antenna, the far field equations are very accurate up to about half way of the near field.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Channel Estimation and Hybrid Architectures for RIS-Assisted Communications
Authors:
Jiguang He,
Nhan Thanh Nguyen,
Rafaela Schroeder,
Visa Tapio,
Joonas Kokkoniemi,
Markku Juntti
Abstract:
Reconfigurable intelligent surfaces (RISs) are considered as potential technologies for the upcoming sixth-generation (6G) wireless communication system. Various benefits brought by deploying one or multiple RISs include increased spectrum and energy efficiency, enhanced connectivity, extended communication coverage, reduced complexity at transceivers, and even improved localization accuracy. Howe…
▽ More
Reconfigurable intelligent surfaces (RISs) are considered as potential technologies for the upcoming sixth-generation (6G) wireless communication system. Various benefits brought by deploying one or multiple RISs include increased spectrum and energy efficiency, enhanced connectivity, extended communication coverage, reduced complexity at transceivers, and even improved localization accuracy. However, to unleash their full potential, fundamentals related to RISs, ranging from physical-layer (PHY) modelling to RIS phase control, need to be addressed thoroughly. In this paper, we provide an overview of some timely research problems related to the RIS technology, i.e., PHY modelling (including also physics), channel estimation, potential RIS architectures, and RIS phase control (via both model-based and data-driven approaches), along with recent numerical results. We envision that more efforts will be devoted towards intelligent wireless environments, enabled by RISs.
△ Less
Submitted 14 April, 2021;
originally announced April 2021.
-
Channel Modeling and Performance Analysis of Airplane-Satellite Terahertz Band Communications
Authors:
J. Kokkoniemi,
J. M. Jornet,
V. Petrov,
E. Koucheryavy,
M. Juntti
Abstract:
Wireless connectivity in airplanes is becoming more important, demanded, and common. One of the largest bottlenecks with the in-flight Internet is that the airplane is far away from both the satellites and the ground base stations during most of the flight time. Maintaining a reliable and high-rate wireless connection with the airplane over such a long-range link thus becomes a challenge. Microwav…
▽ More
Wireless connectivity in airplanes is becoming more important, demanded, and common. One of the largest bottlenecks with the in-flight Internet is that the airplane is far away from both the satellites and the ground base stations during most of the flight time. Maintaining a reliable and high-rate wireless connection with the airplane over such a long-range link thus becomes a challenge. Microwave frequencies allow for long link distances but lack the data rate to serve up to several hundreds of potential onboard customers. Higher bands in the millimeter-wave spectrum (30 GHz-300 GHz) have, therefore, been utilized to overcome the bandwidth limitations. Still, the per-user throughput with state-of-the-art millimeter-wave systems is an order of magnitude lower than the one available with terrestrial wireless networks. In this paper, we take a step further and study the channel characteristics for the terahertz band (THz, 0.3 THz-10 THz) in order to map the feasibility of this band for aviation. We first propose a detailed channel model for aerial THz communications taking into account both the non-flat Earth geometry and the main features of the frequency-selective THz channel. We then apply this model to estimate the characteristics of aerial THz links in different conditions. We finally determine the altitudes where the use of airplane-to-satellite THz connection becomes preferable over the airplane-to-ground THz link. Our results reveal that the capacity of the airborne THz link may reach up to 120 Gbit/s, thus enabling cellular-equivalent data rates to the passengers and staff during the entire flight.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
A Line-of-Sight Channel Model for the 100-450 Gigahertz Frequency Band
Authors:
Joonas Kokkoniemi,
Janne Lehtomäki,
Markku Juntti
Abstract:
This paper documents a simple parametric polynomial line-of-sight channel model for 100-450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110-170 GHz) and the low-THz band (around 275-325 GHz). The main focus herein is to derive a simple, compact, and accurate molecular absorption loss model for the 100-450 GHz band. The derived model r…
▽ More
This paper documents a simple parametric polynomial line-of-sight channel model for 100-450 GHz band. The band comprises two popular beyond fifth generation (B5G) frequency bands, namely, the D band (110-170 GHz) and the low-THz band (around 275-325 GHz). The main focus herein is to derive a simple, compact, and accurate molecular absorption loss model for the 100-450 GHz band. The derived model relies on simple absorption line shape functions that are fitted to the actual response given by complex but exact database approach. The model is also reducible for particular sub-bands within the full range of 100-450 GHz, further simplifying the absorption loss estimate. The proposed model is shown to be very accurate by benchmarking it against the exact response and the similar models given by International Telecommunication Union Radio Communication Sector (ITU-R). The loss is shown to be within $\pm$2 dBs from the exact response for one kilometer link in highly humid environment. Therefore, the its accuracy is even much better in the case of usually considered shorter range future B5G wireless systems.
△ Less
Submitted 12 February, 2020;
originally announced February 2020.
