-
Sparse RF Lens Antenna Array Design for AoA Estimation in Wideband Systems: Placement Optimization and Performance Analysis
Authors:
Joo-Hyun Jo,
Jae-Nam Shim,
Chan-Byoung Chae,
Dong Ku Kim,
Robert W. Heath Jr
Abstract:
In this paper, we propose a novel architecture for a lens antenna array (LAA) designed to work with a small number of antennas and enable angle-of-arrival (AoA) estimation for advanced 5G vehicle-to-everything (V2X) use cases that demand wider bandwidths and higher data rates. We derive a received signal in terms of optical analysis to consider the variability of the focal region for different car…
▽ More
In this paper, we propose a novel architecture for a lens antenna array (LAA) designed to work with a small number of antennas and enable angle-of-arrival (AoA) estimation for advanced 5G vehicle-to-everything (V2X) use cases that demand wider bandwidths and higher data rates. We derive a received signal in terms of optical analysis to consider the variability of the focal region for different carrier frequencies in a wideband multi-carrier system. By taking full advantage of the beam squint effect for multiple pilot signals with different frequencies, we propose a novel reconfiguration of antenna array (RAA) for the sparse LAA and a max-energy antenna selection (MS) algorithm for the AoA estimation. In addition, this paper presents an analysis of the received power at the single antenna with the maximum energy and compares it to simulation results. In contrast to previous studies on LAA that assumed a large number of antennas, which can require high complexity and hardware costs, the proposed RAA with MS estimation algorithm is shown meets the requirements of 5G V2X in a vehicular environment while utilizing limited RF hardware and has low complexity.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
AoA-based Position and Orientation Estimation Using Lens MIMO in Cooperative Vehicle-to-Vehicle Systems
Authors:
Joo-Hyun Jo,
Jae-Nam Shim,
Byoungnam,
Kim,
Chan-Byoung Chae,
Dong Ku Kim
Abstract:
Positioning accuracy is a critical requirement for vehicle-to-everything (V2X) use cases. Therefore, this paper derives the theoretical limits of estimation for the position and orientation of vehicles in a cooperative vehicle-to-vehicle (V2V) scenario, using a lens-based multiple-input multiple-output (lens-MIMO) system. Following this, we analyze the Cram$\acute{\text{e}}$r-Rao lower bounds (CRL…
▽ More
Positioning accuracy is a critical requirement for vehicle-to-everything (V2X) use cases. Therefore, this paper derives the theoretical limits of estimation for the position and orientation of vehicles in a cooperative vehicle-to-vehicle (V2V) scenario, using a lens-based multiple-input multiple-output (lens-MIMO) system. Following this, we analyze the Cram$\acute{\text{e}}$r-Rao lower bounds (CRLBs) of the position and orientation estimation and explore a received signal model of a lens-MIMO for the particular angle of arrival (AoA) estimation with a V2V geometric model. Further, we propose a lower complexity AoA estimation technique exploiting the unique characteristics of the lens-MIMO for a single target vehicle; as a result, its estimation scheme is effectively extended by the successive interference cancellation (SIC) method for multiple target vehicles. Given these AoAs, we investigate the lens-MIMO estimation capability for the positions and orientations of vehicles. Subsequently, we prove that the lens-MIMO outperforms a conventional uniform linear array (ULA) in a certain configuration of a lens's structure. Finally, we confirm that the proposed localization algorithm is superior to ULA's CRLB as the resolution of the lens increases in spite of the lower complexity.
△ Less
Submitted 29 June, 2023;
originally announced June 2023.
-
Beam Squint in Ultra-wideband mmWave Systems: RF Lens Array vs. Phase-Shifter-Based Array
Authors:
Sang-Hyun Park,
Byoungnam Kim,
Dong Ku Kim,
Linglong Dai,
Kai-Kit Wong,
Chan-Byoung Chae
Abstract:
In this article, we discuss the potential of radio frequency (RF) lens for ultra-wideband millimeter-wave (mmWave) systems. In terms of the beam squint, we compare the proposed RF lens antenna with the phase shifter-based array for hybrid beamforming. To reduce the complexities for fully digital beamforming, researchers have come up with RF lens-based hybrid beamforming. The use of mmWave systems,…
▽ More
In this article, we discuss the potential of radio frequency (RF) lens for ultra-wideband millimeter-wave (mmWave) systems. In terms of the beam squint, we compare the proposed RF lens antenna with the phase shifter-based array for hybrid beamforming. To reduce the complexities for fully digital beamforming, researchers have come up with RF lens-based hybrid beamforming. The use of mmWave systems, however, causes an increase in bandwidth, which gives rise to the beam squint phenomenon. We first find the causative factors for beam squint in the dielectric RF lens antenna. Based on the beamforming gain at each frequency, we verify that, in a specific situation, RF lens can be free of the beam squint effect. We use 3D electromagnetic analysis software to numerically interpret the beam squint of each antenna type. Based on the results, we present the degraded spectral efficiency by system-level simulations with 3D indoor ray tracing. Finally, to verify our analysis, we fabricate an actual RF lens antenna and demonstrate the real performance using a mmWave, NI PXIe, software-defined radio system.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Secure Transmission for Hierarchical Information Accessibility in Downlink MU-MIMO
Authors:
Kanguk Lee,
**seok Choi,
Dong Ku Kim,
Jeonghun Park
Abstract:
Physical layer security is a useful tool to prevent confidential information from wiretap**. In this paper, we consider a generalized model of conventional physical layer security, referred to as hierarchical information accessibility (HIA). A main feature of the HIA model is that a network has a hierarchy in information accessibility, wherein decoding feasibility is determined by a priority of…
▽ More
Physical layer security is a useful tool to prevent confidential information from wiretap**. In this paper, we consider a generalized model of conventional physical layer security, referred to as hierarchical information accessibility (HIA). A main feature of the HIA model is that a network has a hierarchy in information accessibility, wherein decoding feasibility is determined by a priority of users. Under this HIA model, we formulate a sum secrecy rate maximization problem with regard to precoding vectors. This problem is challenging since multiple non-smooth functions are involved into the secrecy rate to fulfill the HIA conditions and also the problem is non-convex. To address the challenges, we approximate the minimum function by using the LogSumExp technique, thereafter obtain the first-order optimality condition. One key observation is that the derived condition is cast as a functional eigenvalue problem, where the eigenvalue is equivalent to the approximated objective function of the formulated problem. Accordingly, we show that finding a principal eigenvector is equivalent to finding a local optimal solution. To this end, we develop a novel method called generalized power iteration for HIA (GPI-HIA). Simulations demonstrate that the GPI-HIA significantly outperforms other baseline methods in terms of the secrecy rate.
△ Less
Submitted 16 September, 2021;
originally announced September 2021.
-
Demo: MmWave Lens MIMO
Authors:
Sang-Hyun Park,
Dongsoo Jun,
Byoungnam Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
In fifth-generation (5G) communication, the RF lens antenna is introduced with advantages of high antenna gain and low hardware cost in analog/digital hybrid beamforming technology. In this paper, we design and manufacture the appropriate RF lens antenna for mmWave communication identified in simulation analysis and present a real-time mmWave lens MIMO testbed. Furthermore, in conventional phase-s…
▽ More
In fifth-generation (5G) communication, the RF lens antenna is introduced with advantages of high antenna gain and low hardware cost in analog/digital hybrid beamforming technology. In this paper, we design and manufacture the appropriate RF lens antenna for mmWave communication identified in simulation analysis and present a real-time mmWave lens MIMO testbed. Furthermore, in conventional phase-shift MIMO, beam-squint, a problem caused by the wideband of mmWave communication, is estimated with the fabricated RF lens antenna.
△ Less
Submitted 27 April, 2020;
originally announced April 2020.
-
Ultrareliable and Low-Latency Communication Techniques for Tactile Internet Services
Authors:
Kwang Soon Kim,
Dong Ku Kim,
Chan-Byoung Chae,
Sunghyun Choi,
Young-Chai Ko,
Jonghyun Kim,
Yeon-Geun Lim,
Minho Yang,
Sundo Kim,
Byungju Lim,
Kwanghoon Lee,
Kyung Lin Ryu
Abstract:
This paper presents novel ultrareliable and low-latency communication (URLLC) techniques for URLLC services, such as Tactile Internet services. Among typical use-cases of URLLC services are tele-operation, immersive virtual reality, cooperative automated driving, and so on. In such URLLC services, new kinds of traffic such as haptic information including kinesthetic information and tactile informa…
▽ More
This paper presents novel ultrareliable and low-latency communication (URLLC) techniques for URLLC services, such as Tactile Internet services. Among typical use-cases of URLLC services are tele-operation, immersive virtual reality, cooperative automated driving, and so on. In such URLLC services, new kinds of traffic such as haptic information including kinesthetic information and tactile information need to be delivered in addition to high-quality video and audio traffic in traditional multimedia services. Further, such a variety of traffic has various characteristics in terms of packet sizes and data rates with a variety of requirements of latency and reliability. Furthermore, some traffic may occur in a sporadic manner but require reliable delivery of packets of medium to large sizes within a low latency, which is not supported by current state-of-the-art wireless communication systems and is very challenging for future wireless communication systems. Thus, to meet such a variety of tight traffic requirements in a wireless communication system, novel technologies from the physical layer to the network layer need to be devised. In this paper, some novel physical layer technologies such as waveform multiplexing, multiple access scheme, channel code design, synchronization, and full-duplex transmission for spectrally-efficient URLLC are introduced. In addition, a novel performance evaluation approach, which combines a ray-tracing tool and system-level simulation, is suggested for evaluating the performance of the proposed schemes. Simulation results show the feasibility of the proposed schemes providing realistic URLLC services in realistic geographical environments, which encourages further efforts to substantiate the proposed work.
△ Less
Submitted 9 July, 2019;
originally announced July 2019.
-
RF Lens-Embedded Antenna Array for mmWave MIMO: Design and Performance
Authors:
Yae Jee Cho,
Gee-Yong Suk,
Byoungnam Kim,
Dong Ku Kim,
Chan-Byoung Chae
Abstract:
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmW…
▽ More
The requirement of high data-rate in the fifth generation wireless systems (5G) calls for the ultimate utilization of the wide bandwidth in the mmWave frequency band. Researchers seeking to compensate for mmWave's high path loss and to achieve both gain and directivity have proposed that mmWave multiple-input multiple-output (MIMO) systems make use of beamforming systems. Hybrid beamforming in mmWave demonstrates promising performance in achieving high gain and directivity by using phase shifters at the analog processing block. What remains a problem, however, is the actual implementation of mmWave beamforming systems; to fabricate such a system is costly and complex. With the aim of reducing such cost and complexity, this article presents actual prototypes of the lens antenna as an effective device to be used in the future 5G mmWave hybrid beamforming systems. Using a lens as a passive phase shifter enables beamforming without the heavy network of active phase shifters, while gain and directivity are achieved by the energy-focusing property of the lens. Proposed in this article are two types of lens antennas, one for static and the other for mobile usage. Their performance is evaluated using measurements and simulation data along with link-level analysis via a software defined radio (SDR) platform. Results show the promising potential of the lens antenna for its high gain and directivity, and its improved beam-switching feasibility compared to when a lens is not used. System-level evaluations reveal the significant throughput enhancement in both real indoor and outdoor environments. Moreover, the lens antenna's design issues are also discussed by evaluating different lens sizes.
△ Less
Submitted 22 January, 2018;
originally announced January 2018.
