-
Buckling-induced transmission switching in phononic waveguides in the presence of disorder
Authors:
Ali Kanj,
Alexander F. Vakakis,
Sameh Tawfick
Abstract:
On-chip phononic circuits tailor the transmission of elastic waves, which can couple to electronic and photonic systems, enabling new signal manipulation capabilities. Phononic circuits rely on waveguides that transmit elastic waves within desired frequency passbands, typically designed based on the Bloch modes of the waveguide constitutive cell, assuming linearity and periodicity. MEMS waveguides…
▽ More
On-chip phononic circuits tailor the transmission of elastic waves, which can couple to electronic and photonic systems, enabling new signal manipulation capabilities. Phononic circuits rely on waveguides that transmit elastic waves within desired frequency passbands, typically designed based on the Bloch modes of the waveguide constitutive cell, assuming linearity and periodicity. MEMS waveguides composed of coupled drumhead (membrane) resonators offer tunable MHz operation frequencies for applications in nonlinear optomechanics, topological insulators, phononic cavities, and acoustic switching. Here, we construct a reduced-order model (ROM) to demonstrate the switching of signal transmission in drumhead-resonator waveguides due to thermoelastic buckling. The ROM shows that buckling amplifies existing structural disorders, breaking the periodicity required for waveguide transmission through the first passband. This periodicity breaking manifests in the localization of the first-passband modes, like classical Anderson localization caused by disorders. The proposed ROM is essential to study the investigated phenomena since Bloch mode analysis fails for weakly-disordered (< 5%) finite waveguides due to the disorder amplification caused by the thermoelastic buckling. The illustrated transmission control should be useful for logical acoustic operations, like switching, and can be extended to 2D circuits in the future.
△ Less
Submitted 27 January, 2023;
originally announced January 2023.
-
Ultra-tuning of nonlinear drumhead MEMS resonators by electro-thermoelastic buckling
Authors:
Ali Kanj,
Paolo F. Ferrari,
Arend M. van der Zande,
Alexander F. Vakakis,
Sameh Tawfick
Abstract:
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators…
▽ More
Nonlinear micro-electro-mechanical systems (MEMS) resonators open new opportunities in sensing and signal manipulation compared to their linear counterparts by enabling frequency tuning and increased bandwidth. Here, we design, fabricate and study drumhead resonators exhibiting strongly nonlinear dynamics and develop a reduced order model (ROM) to capture their response accurately. The resonators undergo electrostatically-mediated thermoelastic buckling which tunes their natural frequency from 4.7 to 11.3 MHz, a factor of 2.4x tunability. Moreover, the imposed buckling switches the nonlinearity of the resonators between purely stiffening, purely softening, and even softening-to-stiffening. Accessing these exotic dynamics requires precise control of the temperature and the DC electrostatic forces near the resonator's critical-buckling point. To explain the observed tunability, we develop a one-dimensional physics-based ROM that predicts the linear and nonlinear response of the fundamental bending mode of these drumhead resonators. The ROM captures the dynamic effects of the internal stresses resulting from three sources: The residual stresses from the fabrication process, the mismatch in thermal expansion between the constituent layers, and lastly, the applied electrostatic forces. The ROM replicates the observed tunability of linear (within 5.5% error) and nonlinear responses even near the states of critical buckling. These remarkable nonlinear and large tunability of the natural frequency are valuable features for on-chip acoustic devices in broad applications such as signal manipulation, filtering, and MEMS waveguides.
△ Less
Submitted 10 October, 2022;
originally announced October 2022.
-
Design, Dynamics, and Dissipation of a Torsional-Magnetic Spring Mechanism
Authors:
Ali Kanj,
Rhinithaa P. Thanalakshme,
Chengzhang Li,
John Kulikowski,
Gaurav Bahl,
Sameh Tawfick
Abstract:
We present an analytical and experimental study of torsional magnetic mechanism where the restoring torque is due to magnetic field interactions between rotating and fixed permanent magnets. The oscillator consists of a ball bearing-supported permanent magnet, called the rotor, placed between two fixed permanent magnets called the stators. Perturbing the rotor from its equilibrium angle induces a…
▽ More
We present an analytical and experimental study of torsional magnetic mechanism where the restoring torque is due to magnetic field interactions between rotating and fixed permanent magnets. The oscillator consists of a ball bearing-supported permanent magnet, called the rotor, placed between two fixed permanent magnets called the stators. Perturbing the rotor from its equilibrium angle induces a restoring magnetic torque whose effect is modeled as a torsional spring. This restoring effect is accompanied by dissipation mechanisms arising from structural viscoelasticity, air and electromagnetic dam**, as well as friction in the ball bearings. To investigate the system dynamics, we constructed an experimental setup capable of mechanical, electrical and magnetic measurements. For various rotor-stator gaps in this setup, we validated an analytical model that assumes viscous and dry (Coulomb) dam** during the rotor free response. Moreover, we forced the rotor by a neighboring electromagnetic coil into high amplitude oscillations. We observed unusual resonator nonlinearity: at large rotor-stator gaps, the oscillations are softening; at reduced gaps, the oscillations stiffen-then-soften. The developed reduced-order models capture the nonlinear effects of the rotor-to-stator and the rotor-to-coil distances. These magnetic oscillators are promising in low-frequency electromagnetic signal transmission and in designing magneto-elastic metamaterials with tailorable nonlinearity.
△ Less
Submitted 27 December, 2021;
originally announced December 2021.
-
Magneto-Mechanical Transmitters for Ultra-Low Frequency Near-field Communication
Authors:
Rhinithaa P. Thanalakshme,
Ali Kanj,
JunHwan Kim,
Elias Wilken-Resman,
Jiheng **g,
Inbar H. Grinberg,
Jennifer T. Bernhard,
Sameh Tawfick,
Gaurav Bahl
Abstract:
Electromagnetic signals in the ultra-low frequency (ULF) range below 3 kHz are well suited for underwater and underground wireless communication thanks to low signal attenuation and high penetration depth. However, it is challenging to design ULF transmitters that are simultaneously compact and energy efficient using traditional approaches, e.g., using coils or dipole antennas. Recent works have c…
▽ More
Electromagnetic signals in the ultra-low frequency (ULF) range below 3 kHz are well suited for underwater and underground wireless communication thanks to low signal attenuation and high penetration depth. However, it is challenging to design ULF transmitters that are simultaneously compact and energy efficient using traditional approaches, e.g., using coils or dipole antennas. Recent works have considered magneto-mechanical alternatives, in which ULF magnetic fields are generated using the motion of permanent magnets, since they enable extremely compact ULF transmitters that can operate with low energy consumption and are suitable for human-portable applications. Here we explore the design and operating principles of resonant magneto-mechanical transmitters (MMT) that operate over frequencies spanning a few 10's of Hz up to 1 kHz. We experimentally demonstrate two types of MMT designs using both single-rotor and multi-rotor architectures. We study the nonlinear electro-mechanical dynamics of MMTs using point dipole approximation and magneto-static simulations. We further experimentally explore techniques to control the operation frequency and demonstrate amplitude modulation up to 10 bits-per-second.
△ Less
Submitted 2 January, 2021; v1 submitted 28 December, 2020;
originally announced December 2020.
