-
Tethered Power for a Series of Quadcopters: Analysis and Applications
Authors:
Karan P. Jain,
Prasanth Kotaru,
Massimiliano de Sa,
Koushil Sreenath,
Mark W. Mueller
Abstract:
Tethered quadcopters are used for extended flight operations where the power to the system is provided via a tether connected to an external power source. In this work, we consider a system of multiple quadcopters powered by a single tether. We study the design factors that influence the power requirements, such as the electrical resistance of the tether, input voltage, and quadcopters' positions.…
▽ More
Tethered quadcopters are used for extended flight operations where the power to the system is provided via a tether connected to an external power source. In this work, we consider a system of multiple quadcopters powered by a single tether. We study the design factors that influence the power requirements, such as the electrical resistance of the tether, input voltage, and quadcopters' positions. We present an analysis to predict the required power to be supplied to a series of N tethered quadcopters, with respect to the thrust of each quadcopter which guarantees electrical safety and helps in design optimization. We find that there is a critical boundary of thrusts that cannot be exceeded due to fundamental electrical limitations. We compare the power consumption for one tethered quadcopter and two tethered quadcopters and show that for large quadcopters far enough from the anchor point, a two-quadcopter system consumes lesser power. We show that, for a representative use case of firefighting, a tethered system with two quadcopters consumes 26% less power than a corresponding system with one quadcopter. Finally, we present experiments demonstrating the use of a two-quadcopter tethered system as compared to a one-quadcopter tethered system in a cluttered environment, such as passing through a window and gras** an object over an obstacle.
△ Less
Submitted 26 September, 2022; v1 submitted 15 March, 2022;
originally announced March 2022.
-
Docking two multirotors in midair using relative vision measurements
Authors:
Karan P. Jain,
Minos Park,
Mark W. Mueller
Abstract:
Modular robots have been rising in popularity for a variety of applications, and autonomous midair docking is a necessary task for real world deployment of these robots. We present a state estimator based on the extended Kalman filter for relative localization of one multirotor with respect to another using only onboard sensors, specifically an inertial measurement unit and a camera-marker pair. A…
▽ More
Modular robots have been rising in popularity for a variety of applications, and autonomous midair docking is a necessary task for real world deployment of these robots. We present a state estimator based on the extended Kalman filter for relative localization of one multirotor with respect to another using only onboard sensors, specifically an inertial measurement unit and a camera-marker pair. Acceleration and angular velocity measurements along with relative pose measurements from a camera on the first multirotor looking at a marker on the second multirotor are used to estimate the relative position and velocity of the first multirotor with respect to the second, and the absolute attitude of the first multirotor. We also present a control architecture to use these onboard state estimates to control the first multirotor at a desired setpoint with respect to the second. The performance of the estimator and control architecture are experimentally validated by successfully and repeatably performing midair docking -- a task that requires relative position precision on the order of a centimeter.
△ Less
Submitted 11 November, 2020;
originally announced November 2020.
-
Staging energy sources to extend flight time of a multirotor UAV
Authors:
Karan P. Jain,
Jerry Tang,
Koushil Sreenath,
Mark W. Mueller
Abstract:
Energy sources such as batteries do not decrease in mass after consumption, unlike combustion-based fuels. We present the concept of staging energy sources, i.e. consuming energy in stages and ejecting used stages, to progressively reduce the mass of aerial vehicles in-flight which reduces power consumption, and consequently increases flight time. A flight time vs. energy storage mass analysis is…
▽ More
Energy sources such as batteries do not decrease in mass after consumption, unlike combustion-based fuels. We present the concept of staging energy sources, i.e. consuming energy in stages and ejecting used stages, to progressively reduce the mass of aerial vehicles in-flight which reduces power consumption, and consequently increases flight time. A flight time vs. energy storage mass analysis is presented to show the endurance benefit of staging to multirotors. We consider two specific problems in discrete staging -- optimal order of staging given a certain number of energy sources, and optimal partitioning of a given energy storage mass budget into a given number of stages. We then derive results for two continuously staged cases -- an internal combustion engine driving propellers and a rocket engine. Notably, we show that a multicopter powered by internal combustion has an upper limit on achievable flight time independent of the available fuel mass, but no such limit exists for rocket propulsion. Lastly, we validate the analysis with flight experiments on a custom two-stage battery-powered quadcopter. This quadcopter can eject a battery stage after consumption in-flight using a custom-designed mechanism, and continue hovering using the next stage. The experimental flight times match well with those predicted from the analysis for our vehicle. We achieve a 19% increase in flight time using the batteries in two stages as compared to a single stage.
△ Less
Submitted 11 November, 2020; v1 submitted 9 March, 2020;
originally announced March 2020.
-
Flying batteries: In-flight battery switching to increase multirotor flight time
Authors:
Karan P. Jain,
Mark W. Mueller
Abstract:
We present a novel approach to increase the flight time of a multirotor via mid-air docking and in-flight battery switching. A main quadcopter flying using a primary battery has a docking platform attached to it. A 'flying battery' - a small quadcopter carrying a secondary battery - is equipped with docking legs that can mate with the main quadcopter's platform. Connectors between the legs and the…
▽ More
We present a novel approach to increase the flight time of a multirotor via mid-air docking and in-flight battery switching. A main quadcopter flying using a primary battery has a docking platform attached to it. A 'flying battery' - a small quadcopter carrying a secondary battery - is equipped with docking legs that can mate with the main quadcopter's platform. Connectors between the legs and the platform establish electrical contact on docking, and enable power transfer from the secondary battery to the main quadcopter. A custom-designed circuit allows arbitrary switching between the primary battery and secondary battery. We demonstrate the concept in a flight experiment involving repeated docking, battery switching, and undocking. The experiment increases the flight time of the main quadcopter by a factor of 4.7x compared to solo flight, and 2.2x a theoretical limit for that given multirotor. Importantly, this increase in flight time is not associated with a large increase in overall vehicle mass or size, leaving the main quadcopter in fundamentally the same safety class.
△ Less
Submitted 25 March, 2020; v1 submitted 22 September, 2019;
originally announced September 2019.
-
Predictive Control for Chasing a Ground Vehicle using a UAV
Authors:
Jaeseung Byun,
Karan P. Jain,
Siddharth H. Nair,
Haoyun Xu,
Jiaming Zha
Abstract:
We propose a high-level planner for a multirotor to chase a ground vehicle, while simultaneously respecting various state and input constraints. Assuming a minimal kinematic model for the ground vehicle, we use data collected online to generate predictions for our planner within a model predictive control framework. Our solution is demonstrated, both via simulations and experiments on a stable qua…
▽ More
We propose a high-level planner for a multirotor to chase a ground vehicle, while simultaneously respecting various state and input constraints. Assuming a minimal kinematic model for the ground vehicle, we use data collected online to generate predictions for our planner within a model predictive control framework. Our solution is demonstrated, both via simulations and experiments on a stable quadcopter platform.
△ Less
Submitted 22 May, 2019;
originally announced May 2019.