-
Cell-free massive MIMO Channels in an Urban Environment -- Measurements and Channel Statistics
Authors:
Yuning Zhang,
Thomas Choi,
Zihang Cheng,
Jorge Gomez-Ponce,
Issei Kanno,
Masaaki Ito,
Andreas F. Molisch
Abstract:
Cell-free massive MIMO (CF-mMIMO), where each user equipment (UE) is connected to multiple access points (APs), is emerging as an important component for 5G and 6G cellular systems. Accurate channel models based on measurements are required to optimize their design and deployment. This paper presents an extensive measurement campaign for CF-mMIMO in an urban environment. A new "virtual AP" techniq…
▽ More
Cell-free massive MIMO (CF-mMIMO), where each user equipment (UE) is connected to multiple access points (APs), is emerging as an important component for 5G and 6G cellular systems. Accurate channel models based on measurements are required to optimize their design and deployment. This paper presents an extensive measurement campaign for CF-mMIMO in an urban environment. A new "virtual AP" technique measures channels between 80 UE locations and more than 20,000 possible microcellular AP locations. Measurements are done at 3.5 GHz carrier frequency with 350 MHz bandwidth (BW). The paper describes the measurement setup and data processing, shows sample results and their physical interpretation, and provides statistics for key quantities such as pathloss, shadowing, delay spread (DS), and delay window. We find pathloss coefficients of 2.9 and 10.4 for line-of-sight (LOS) and non line-of-sight (NLOS), respectively, where the high LOS coefficient is mainly because larger distance leads to more grazing angle of incidence and thus lower antenna gain in our setup. Shadowing standard deviations are 5.1/16.6 dB, and root mean squared (RMS) DSs of -80.6/-72.6 dBs. The measurements can also be used for parameterizing a CUNEC-type model, which will be reported in future work.
△ Less
Submitted 3 June, 2024;
originally announced June 2024.
-
Large-scale Outdoor Cell-free mMIMO Channel Measurement in an Urban Scenario at 3.5 GHz
Authors:
Yuning Zhang,
Thomas Choi,
Zihang Cheng,
Issei Kanno,
Masaaki Ito,
Jorge Gomez-Ponce,
Hussein Hammoud,
Bowei Wu,
Ashwani Pradhan,
Kelvin Arana,
Pramod Krishna,
Tianyi Yang,
Tyler Chen,
Ishita Vasishtha,
Haoyu Xie,
Linyu Sun,
Andreas F. Molisch
Abstract:
The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban environment. We measured impulse responses between over 20,000 potential access point (AP) locations and 80 user equipments (UEs) at 3.5 GHz with 350 MHz bandw…
▽ More
The design of cell-free massive MIMO (CF-mMIMO) systems requires accurate, measurement-based channel models. This paper provides the first results from the by far most extensive outdoor measurement campaign for CF-mMIMO channels in an urban environment. We measured impulse responses between over 20,000 potential access point (AP) locations and 80 user equipments (UEs) at 3.5 GHz with 350 MHz bandwidth (BW). Measurements use a "virtual array" approach at the AP and a hybrid switched/virtual approach at the UE. This paper describes the sounder design, measurement environment, data processing, and sample results, particularly the evolution of the power-delay profiles (PDPs) as a function of the AP locations, and its relation to the propagation environment.
△ Less
Submitted 6 June, 2024; v1 submitted 31 May, 2024;
originally announced May 2024.
-
Trajectory tracking control of the second-order chained form system by using state transitions
Authors:
Mayu Nakayama,
Masahide Ito
Abstract:
This paper proposes a novel control approach composed of sinusoidal reference trajectories and trajectory tracking controller for the second-order chained form system. The system is well-known as a canonical form for a class of second-order nonholonomic systems obtained by appropriate transformation of the generalized coordinates and control inputs. The system is decomposed into three subsystems,…
▽ More
This paper proposes a novel control approach composed of sinusoidal reference trajectories and trajectory tracking controller for the second-order chained form system. The system is well-known as a canonical form for a class of second-order nonholonomic systems obtained by appropriate transformation of the generalized coordinates and control inputs. The system is decomposed into three subsystems, two of them are the so-called double integrators and the other subsystem is a nonlinear system depending on one of the double integrators. The double integrators are linearly controllable, which enables to transit the value of the position state in order to modify the nature of the nonlinear system that depends on them. Transiting the value to "one" corresponds to modifying the nonlinear subsystem into the double integrator; transiting the value to "zero" corresponds to modifying the nonlinear subsystem into an uncontrollable linear autonomous system. Focusing on this nature, this paper proposes a feedforward control strategy. Furthermore, from the perspective of practical usefulness, the control strategy is extended into trajectory tracking control by using proportional-derivative feedback. The effectiveness of the proposed method is demonstrated through several numerical experiments including an application to an underactuated manipulator.
△ Less
Submitted 18 January, 2023; v1 submitted 11 January, 2023;
originally announced January 2023.
-
Energy Efficiency of Uplink Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channel
Authors:
Thomas Choi,
Masaaki Ito,
Issei Kanno,
Jorge Gomez-Ponce,
Colton Bullard,
Takeo Ohseki,
Kosuke Yamazaki,
Andreas F. Molisch
Abstract:
Cell-free massive MIMO (CF-mMIMO) provides wireless connectivity for a large number of user equipments (UEs) using access points (APs) distributed across a wide area with high spectral efficiency (SE). The energy efficiency (EE) of the uplink is determined by (i) the transmit power control (TPC) algorithms, (ii) the numbers, configurations, and locations of the APs and the UEs, and (iii) the propa…
▽ More
Cell-free massive MIMO (CF-mMIMO) provides wireless connectivity for a large number of user equipments (UEs) using access points (APs) distributed across a wide area with high spectral efficiency (SE). The energy efficiency (EE) of the uplink is determined by (i) the transmit power control (TPC) algorithms, (ii) the numbers, configurations, and locations of the APs and the UEs, and (iii) the propagation channels between the APs and the UEs. This paper investigates all three aspects, based on extensive (~30,000 possible AP locations and 128 possible UE locations) channel measurement data at 3.5 GHz. We compare three different TPC algorithms, namely maximization of transmit power (max-power), maximization of minimum SE (max-min SE), and maximization of minimum EE (max-min EE) while guaranteeing a target SE. We also compare various antenna arrangements including fully-distributed and semi-distributed systems, where APs can be located on a regular grid or randomly, and the UEs can be placed in clusters or far apart. Overall, we show that the max-min EE TPC is highly effective in improving the uplink EE, especially when no UE within a set of served UEs is in a bad channel condition and when the BS antennas are fully-distributed.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Evaluation on Energy Efficiency of UE in UL Cell-Free Massive MIMO System With Power Control Methods
Authors:
Masaaki Ito,
Issei Kanno,
Takeo Ohseki,
Kosuke Yamazaki,
Yoji Kishi,
Thomas Choi,
Andreas F. Molisch
Abstract:
Cell-free massive multiple-input multiple-output (CF mMIMO) systems are expected to provide faster and more robust connections to user equipments (UEs) by cooperation of a massive number of distributed access points, and to be one of the key technologies for beyond 5G (B5G). In B5G, energy efficiency (EE) is one of the most important key indicators because various kinds of devices connect to the n…
▽ More
Cell-free massive multiple-input multiple-output (CF mMIMO) systems are expected to provide faster and more robust connections to user equipments (UEs) by cooperation of a massive number of distributed access points, and to be one of the key technologies for beyond 5G (B5G). In B5G, energy efficiency (EE) is one of the most important key indicators because various kinds of devices connect to the network and communicate with each other. While previously proposed transmit power control methods in CF mMIMO systems have aimed to maximize spectral efficiency or total EE, we evaluate in this paper a different approach for maximizing the minimum EE among all UEs. We show that this algorithm can provide the optimum solution in polynomial time, and demonstrate with simulations the improved minimum EE compared to conventional methods.
△ Less
Submitted 4 October, 2021;
originally announced October 2021.
-
Uplink Energy Efficiency of Cell-Free Massive MIMO With Transmit Power Control in Measured Propagation Channels
Authors:
Thomas Choi,
Masaaki Ito,
Issei Kanno,
Takeo Oseki,
Kosuke Yamazaki,
Andreas F. Molisch
Abstract:
Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the "target" spectral efficiency (SE) is met, it is important to optimize…
▽ More
Cell-free massive MIMO (CF-mMIMO) is expected to provide reliable wireless services for a large number of user equipments (UEs) using access points (APs) distributed across a wide area. When the UEs are battery-powered, uplink energy efficiency (EE) becomes an important performance metric for CF-mMIMO systems. Therefore, if the "target" spectral efficiency (SE) is met, it is important to optimize the uplink EE when setting the transmit powers of the UEs. Also, such transmit power control (TPC) method must be tested on channel data from real-world measurements to prove its effectiveness. In this paper, we compare three different TPC algorithms using zero-forcing reception by applying them to 3.5 GHz channel measurement data featuring ~30,000 possible AP locations and 8 UE locations in a 200mx200m area. We show that the max-min EE algorithm is highly effective in improving the uplink EE at a target SE, especially if the number of single-antenna APs is large, circuit power consumption is low, and the maximum allowed transmit power of the UEs is high.
△ Less
Submitted 4 August, 2021;
originally announced August 2021.
-
Using a Drone Sounder to Measure Channels for Cell-Free Massive MIMO Systems
Authors:
Thomas Choi,
Jorge Gomez-Ponce,
Colton Bullard,
Issei Kanno,
Masaaki Ito,
Takeo Ohseki,
Kosuke Yamazaki,
Andreas F. Molisch
Abstract:
Measurements of the propagation channel form the basis of all realistic system performance evaluations, as foundation of statistical channel models or to verify ray tracing. This is also true for the analysis of cell-free massive multi-input multi-output (CF-mMIMO) systems in real-world environments. However, such experimental data are difficult to obtain, due to the complexity and expense of depl…
▽ More
Measurements of the propagation channel form the basis of all realistic system performance evaluations, as foundation of statistical channel models or to verify ray tracing. This is also true for the analysis of cell-free massive multi-input multi-output (CF-mMIMO) systems in real-world environments. However, such experimental data are difficult to obtain, due to the complexity and expense of deploying tens or hundreds of channel sounder nodes across the wide area a CF-mMIMO system is expected to cover, especially when different configurations and number of antennas are to be explored. In this paper, we provide a novel method to measure channels for CF-mMIMO systems using a channel sounder based on a drone, also known as a small unmanned aerial vehicle (UAV). Such a method is efficient, flexible, simple, and low-cost, capturing channel data from thousands of different access point (AP) locations within minutes. In addition, we provide sample 3.5 GHz measurement results analyzing deployment strategies for APs and make the data open source, so they may be used for various other studies.
△ Less
Submitted 6 May, 2022; v1 submitted 23 May, 2021;
originally announced June 2021.
-
State-switching control of the second-order chained form system
Authors:
Masahide Ito
Abstract:
This paper addresses a motion planning problem of the second-order chained form system. The author presents a novel control approach based on switching a state. The second-order chained form system is composed of three subsystems including two double integrators and a nonlinear system. Switching a single state of the double integrators can modify the nature of the nonlinear system. Such state-swit…
▽ More
This paper addresses a motion planning problem of the second-order chained form system. The author presents a novel control approach based on switching a state. The second-order chained form system is composed of three subsystems including two double integrators and a nonlinear system. Switching a single state of the double integrators can modify the nature of the nonlinear system. Such state-switching and sinusoidal control construct the basis of the proposed control approach. The effectiveness is validated by a simulation result.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.