-
1-D Convolutional Graph Convolutional Networks for Fault Detection in Distributed Energy Systems
Authors:
Bang L. H. Nguyen,
Tuyen Vu,
Thai-Thanh Nguyen,
Mayank Panwar,
Rob Hovsapian
Abstract:
This paper presents a 1-D convolutional graph neural network for fault detection in microgrids. The combination of 1-D convolutional neural networks (1D-CNN) and graph convolutional networks (GCN) helps extract both spatial-temporal correlations from the voltage measurements in microgrids. The fault detection scheme includes fault event detection, fault type and phase classification, and fault loc…
▽ More
This paper presents a 1-D convolutional graph neural network for fault detection in microgrids. The combination of 1-D convolutional neural networks (1D-CNN) and graph convolutional networks (GCN) helps extract both spatial-temporal correlations from the voltage measurements in microgrids. The fault detection scheme includes fault event detection, fault type and phase classification, and fault location. There are five neural network model training to handle these tasks. Transfer learning and fine-tuning are applied to reduce training efforts. The combined recurrent graph convolutional neural networks (1D-CGCN) is compared with the traditional ANN structure on the Potsdam 13-bus microgrid dataset. The achievable accuracy of 99.27%, 98.1%, 98.75%, and 95.6% for fault detection, fault type classification, fault phase identification, and fault location respectively.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Hierarchical Control of Grid-Connected Hydrogen Electrolyzer Providing Grid Services
Authors:
Bang L. H. Nguyen,
Mayank Panwar,
Rob Hovsapian,
Yashodhan Agalgaokar,
Tuyen Vu
Abstract:
This paper presents the operation modes and control architecture of the grid-connected hydrogen electrolyzer systems for the provision of frequency and voltage supports. The analysis is focused on the primary and secondary loops in the hierarchical control scheme. At the power converter inner control loop, the voltage- and current-control modes are analyzed. At the primary level, the droop and opp…
▽ More
This paper presents the operation modes and control architecture of the grid-connected hydrogen electrolyzer systems for the provision of frequency and voltage supports. The analysis is focused on the primary and secondary loops in the hierarchical control scheme. At the power converter inner control loop, the voltage- and current-control modes are analyzed. At the primary level, the droop and opposite droop control strategies to provide voltage and frequency support are described. Coordination between primary control and secondary, tertiary reserves is discussed. The case studies and real-time simulation results are provided using Typhoon HIL to back the theoretical investigation.
△ Less
Submitted 5 November, 2022;
originally announced November 2022.
-
Spatial-Temporal Recurrent Graph Neural Networks for Fault Diagnostics in Power Distribution Systems
Authors:
Bang Nguyen,
Tuyen Vu,
Thai-Thanh Nguyen,
Mayank Panwar,
Rob Hovsapian
Abstract:
Fault diagnostics are extremely important to decide proper actions toward fault isolation and system restoration. The growing integration of inverter-based distributed energy resources imposes strong influences on fault detection using traditional overcurrent relays. This paper utilizes emerging graph learning techniques to build a new temporal recurrent graph neural network models for fault diagn…
▽ More
Fault diagnostics are extremely important to decide proper actions toward fault isolation and system restoration. The growing integration of inverter-based distributed energy resources imposes strong influences on fault detection using traditional overcurrent relays. This paper utilizes emerging graph learning techniques to build a new temporal recurrent graph neural network models for fault diagnostics. The temporal recurrent graph neural network structures can extract the spatial-temporal features from data of voltage measurement units installed at the critical buses. From these features, fault event detection, fault type/phase classification, and fault location are performed. Compared with previous works, the proposed temporal recurrent graph neural networks provide a better generalization for fault diagnostics. Moreover, the proposed scheme retrieves the voltage signals instead of current signals so that there is no need to install relays at all lines of the distribution system. Therefore, the proposed scheme is generalizable and not limited by the number of relays installed. The effectiveness of the proposed method is comprehensively evaluated on the Potsdam microgrid and IEEE 123-node system in comparison with other neural network structures.
△ Less
Submitted 27 October, 2022;
originally announced October 2022.
-
Power Converter Topologies for Electrolyzer Applications to Enable Electric Grid Services
Authors:
Bang L. H. Nguyen,
Mayank Panwar,
Rob Hovsapian,
Kazunori Nagasawa,
Tuyen V. Vu
Abstract:
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyz…
▽ More
Hydrogen electrolyzers, with their operational flexibility, can be configured as smart dynamic loads which can provide grid services and facilitate the integration of more renewable energy sources into the electrical grid. However, to enable this ability, the electrolyzer system should be able to control both active and reactive power in coordination with the low-level controller of the electrolyzer via the power electronics system interface between the utility grid and electrolyzer. This paper discusses power converter topologies and the control scheme of this power electronics interface for electrolyzer applications to enable electricity grid services. For the sake of unity, in this paper, we consider the power converter system interfacing the utility grid at the line-to-line root mean square RMS value of 480 VAC 60 Hz and supplying to the 3500 A 750 kW PEM electrolyzer stack.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Integrated Multiport Back-to-Back Power Converter for Type-4 Wind Turbine Generator with Hybrid Energy Storage System
Authors:
Bang Le-Huy Nguyen,
Thai-Thanh Nguyen,
Van-Long Pham,
Tuyen Vu,
Mayank Panwar,
Rob Hovsapian
Abstract:
This paper proposes a novel integrated multiport bidirectional back-to-back power converter for a type-4 wind turbine that accommodates a battery and supercapacitor for energy storage. The circuit topology reduces 4 switches compared to the traditional configuration. Moreover, owing to the dual-buck structure embedded in the phase leg, the circuitry has no short-circuit path, therefore it withstan…
▽ More
This paper proposes a novel integrated multiport bidirectional back-to-back power converter for a type-4 wind turbine that accommodates a battery and supercapacitor for energy storage. The circuit topology reduces 4 switches compared to the traditional configuration. Moreover, owing to the dual-buck structure embedded in the phase leg, the circuitry has no short-circuit path, therefore it withstands short-circuited events for a much longer time than the normal phase-leg and prevents the reverse current in turn-off recovery. The use of a hybrid energy storage system with battery and supercapacitor helps smooth out the power output under wind gusts and stabilizes the DC-link voltage under grid fault conditions. The case studies are carried out with a 1.5 MW wind turbine system. Simulation results are provided for the theoretical validation.
△ Less
Submitted 13 September, 2022;
originally announced September 2022.
-
Real Time Impact Control on Charging Energy Storage For Shipboard Power Systems
Authors:
Yusheng Luo,
Sanjeev Srivastava,
Manish Mohanpurkar,
Svetomir Stevic,
Rob Hovsapian
Abstract:
Medium voltage direct-current based integrated power system is projected as one of the solutions for powering the all-electric ship. It faces significant challenges for accurately energizing advanced loads, especially the pulsed power load, which can be rail gun, high power radar, and other state of art equipment. Energy storage based on supercapacitors is proposed as a technique for buffering the…
▽ More
Medium voltage direct-current based integrated power system is projected as one of the solutions for powering the all-electric ship. It faces significant challenges for accurately energizing advanced loads, especially the pulsed power load, which can be rail gun, high power radar, and other state of art equipment. Energy storage based on supercapacitors is proposed as a technique for buffering the direct impact of pulsed power load on the power systems. However, the high magnitude of charging current of the energy storage can pose as a disturbance to both distribution and generation systems. This paper presents a fast switching device based real time control system that can achieve a desired balance between maintaining the required power quality and fast charging the energy storage in required time. Test results are shown to verify the performance of the proposed control algorithm.
△ Less
Submitted 17 January, 2018;
originally announced January 2018.