-
The Analysis and the Performance of the Parallel-Partial Reset Control System
Authors:
Xinxin Zhang,
S. Hassan HosseinNia
Abstract:
Reset controllers have demonstrated their effectiveness in enhancing performance in precision motion systems. To further exploiting the potential of reset controllers, this study introduces a parallel-partial reset control structure. Frequency response analysis is effective for the design and fine-tuning of controllers in industries. However, conducting frequency response analysis for reset contro…
▽ More
Reset controllers have demonstrated their effectiveness in enhancing performance in precision motion systems. To further exploiting the potential of reset controllers, this study introduces a parallel-partial reset control structure. Frequency response analysis is effective for the design and fine-tuning of controllers in industries. However, conducting frequency response analysis for reset control systems poses challenges due to their nonlinearities. We develop frequency response analysis methods for both the open-loop and closed-loop parallel-partial reset systems. Simulation results validate the accuracy of the analysis methods, showcasing precision enhancements exceeding 100% compared to the traditional describing function method. Furthermore, we design a parallel-partial reset controller within the Proportional-Integral-Derivative (PID) control structure for a mass-spring-damper system. The frequency response analysis of the designed system indicates that, while maintaining the same bandwidth and phase margin of the first-order harmonics, the new system exhibits lower magnitudes of higher-order harmonics, compared to the traditional reset system. Moreover, simulation results demonstrate that the new system achieves lower overshoot and quicker settling time compared to both the traditional reset and linear systems.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Sha** Nonlinearity in Reset Controllers for Precision Motion Systems
Authors:
Nima Karbasizadeh,
S. Hassan HosseinNia
Abstract:
The precision motion industry has an ever-increasing demand for faster, more precise and more robust controllers. From the perspective of frequency domain and loopsha** technique, this demand has pushed the linear controllers to their inherent limits, namely, the waterbed effect and Bode's phase-gain relationship. Mathematically, complex-order transfer functions are not bound by Bode's phase-gai…
▽ More
The precision motion industry has an ever-increasing demand for faster, more precise and more robust controllers. From the perspective of frequency domain and loopsha** technique, this demand has pushed the linear controllers to their inherent limits, namely, the waterbed effect and Bode's phase-gain relationship. Mathematically, complex-order transfer functions are not bound by Bode's phase-gain relationship. However, implementing them in practice is a challenge to be solved. This extended abstract will show review the previous work of the authors in sha** nonlinearities in reset controllers and contribute and propose an overall architecture for reset control systems to approximate complex order controllers.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Hybrid Tunable Magnet Actuator: Modeling and Design
Authors:
W. B. Hoekwater,
J. D. Wiersema1,
S. H. HosseinNia
Abstract:
Reluctance actuators are preferred for high-precision applications. Due to resistive losses in the coils, the accuracy of this type of actuator will reduce in quasi-static operation mode within a vacuum environment. By using soft permanent magnets whose magnetization states are in-situ tuned, no constant power is needed to create a force and thereby the resistive losses will reduce. In this paper,…
▽ More
Reluctance actuators are preferred for high-precision applications. Due to resistive losses in the coils, the accuracy of this type of actuator will reduce in quasi-static operation mode within a vacuum environment. By using soft permanent magnets whose magnetization states are in-situ tuned, no constant power is needed to create a force and thereby the resistive losses will reduce. In this paper, a new tuning method is investigated in order to reduce the resistive losses. By using a history-dependent and non-linear hysteresis model, a more efficient tuning algorithm is designed. Besides this, the position accuracy and control simplicity of a variable reluctance tunable magnet actuator are improved by linearizing the non-linear force-flux relationship. This is achieved by using bias fluxes generated by hard permanent magnets.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Tunable Magnets: modeling and validation for dynamic and precision applications
Authors:
Silvan G. Viëtor,
Jo W. Spronck,
S. Hassan HosseinNia
Abstract:
Actuator self-heating limits the achievable force and can cause unwanted structural deformations. This is especially apparent in quasi-static actuation systems that require the actuator to maintain a stable position over an extended period. As a solution, we use the concept of a Tunable Magnet. Tunable magnets rely on in-situ magnetization state tuning of AlNico to create an infinitely adjustable…
▽ More
Actuator self-heating limits the achievable force and can cause unwanted structural deformations. This is especially apparent in quasi-static actuation systems that require the actuator to maintain a stable position over an extended period. As a solution, we use the concept of a Tunable Magnet. Tunable magnets rely on in-situ magnetization state tuning of AlNico to create an infinitely adjustable magnetic flux. They consist of an AlNiCo low coercivity permanent magnet together with a magnetizing coil. After tuning, the AlNiCo retains its magnetic field without further energy input, which eliminates the static heat dissipation. To enable implementation in actuation systems, the AlNiCo needs to be robustly tunable in the presence of a varying system air-gap. We achieve this by implementing a magnetization state tuning method, based on a magnetic circuit model of the actuator, measured AlNiCo BH data and air-gap flux feedback control. The proposed tuning method consists of 2 main steps. The prediction step, during which the required magnet operating point is determined, and the demagnetization step, where a feedback controller drives a demagnetization current to approach this operating point. With this method implemented for an AlNiCo 5 tunable magnet in a reluctance actuator configuration, we achieve tuning with a maximum error of 15.86 "mT" and a minimum precision of 0.67 "mT" over an air-gap range of 200 "μm". With this tuning accuracy, actuator heating during static periods is almost eliminated. Only a small bias current is needed to compensate for the tuning error.
△ Less
Submitted 30 September, 2022;
originally announced October 2022.
-
Steady-state nonlinearity of open-loop reset systems
Authors:
Marcin B. Kaczmarek,
Xinxin Zhang,
S. Hassan HosseinNia
Abstract:
In this paper, we introduce a new representation for open-loop reset systems. We show that at steady-state a reset integrator can be modelled as a parallel interconnection of the base-linear system and piece-wise constant nonlinearity. For sinusoidal input signals, this nonlinearity takes a form of a square wave. Subsequently, we show how the behaviour of a general open-loop reset system is relate…
▽ More
In this paper, we introduce a new representation for open-loop reset systems. We show that at steady-state a reset integrator can be modelled as a parallel interconnection of the base-linear system and piece-wise constant nonlinearity. For sinusoidal input signals, this nonlinearity takes a form of a square wave. Subsequently, we show how the behaviour of a general open-loop reset system is related to the nonlinearity of a reset integrator. The proposed approach simplifies the analysis of reset elements in the frequency domain and provides new insights into the behaviour of reset control systems.
△ Less
Submitted 21 June, 2022;
originally announced June 2022.
-
Frequency Response Analysis for Reset Control Systems: Application to Predict Precision of Motion Systems
Authors:
Xinxin Zhang,
Marcin B Kaczmarek,
S. Hassan HosseinNia
Abstract:
The frequency response analysis describes the steady-state responses of a system to sinusoidal inputs at different frequencies, providing control engineers with an effective tool for designing control systems in the frequency domain. However, conducting this analysis for closed-loop reset systems is challenging due to system nonlinearity. This paper addresses this challenge through two key contrib…
▽ More
The frequency response analysis describes the steady-state responses of a system to sinusoidal inputs at different frequencies, providing control engineers with an effective tool for designing control systems in the frequency domain. However, conducting this analysis for closed-loop reset systems is challenging due to system nonlinearity. This paper addresses this challenge through two key contributions. First, it introduces novel analysis methods for both open-loop and closed-loop reset control systems at steady states. These methods decompose the frequency responses of reset systems into base-linear and nonlinear components. Second, building upon this analysis, the paper develops closed-loop higher-order sinusoidal-input describing functions for reset control systems at steady states. These functions facilitate the analysis of frequency-domain properties, establish a connection between open-loop and closed-loop analysis, and enable the prediction of time-domain performance for reset systems. The accuracy and effectiveness of the proposed methods are successfully validated through simulations and experiments conducted on a reset Proportional-Integral-Derivative (PID) controlled precision motion system.
△ Less
Submitted 23 May, 2024; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Complex-order Reset Control System
Authors:
Nima Karbasizadeh,
S. Hassan HosseinNia
Abstract:
According to the well-known loop sha** method for the design of controllers, the performance of the controllers in terms of step response, steady-state disturbance rejection and noise attenuation and robustness can be improved by increasing the gain at lower frequencies and decreasing it at higher frequencies and increasing the phase margin as much as possible. However, the inherent properties o…
▽ More
According to the well-known loop sha** method for the design of controllers, the performance of the controllers in terms of step response, steady-state disturbance rejection and noise attenuation and robustness can be improved by increasing the gain at lower frequencies and decreasing it at higher frequencies and increasing the phase margin as much as possible. However, the inherent properties of linear controllers, the Bode's phase-gain relation, create a limitation. In theory, a complex-order transfer function can break the Bode's gain-phase relation; however, such transfer function cannot be directly implemented and should be approximated. This paper proposes a reset element and a tuning method to approximate a Complex-Order Controller (CLOC) and, through a simulation example, shows the benefits of using such a controller.
△ Less
Submitted 3 May, 2022;
originally announced May 2022.
-
Generalizing Hybrid Integrator-Gain Systems Using Fractional Calculus
Authors:
S. Ali Hosseini,
Mohammad Saleh Tavazoei,
Luke F. van Eijk,
S. Hassan HosseinNia
Abstract:
The Hybrid Integral Gain Systems (HIGS) has recently gained a lot of attention in the control of precision motion systems. HIGS is a nonlinear low pass filter with a 52 degree phase advantage over its linear counterpart. This property allows us to avoid the limitations typically associated with linear controllers like the waterbed effect and bode's phase gain relation. In this paper, we generalize…
▽ More
The Hybrid Integral Gain Systems (HIGS) has recently gained a lot of attention in the control of precision motion systems. HIGS is a nonlinear low pass filter with a 52 degree phase advantage over its linear counterpart. This property allows us to avoid the limitations typically associated with linear controllers like the waterbed effect and bode's phase gain relation. In this paper, we generalize HIGS via replacing the involved integer order integrator with a fractional order one to adapt the phase lead from 0 degree (linear low pass filter) to 52 degree (HIGS). To analyze this filter in the frequency domain, the describing function of the proposed filter, i.e., the fractional-order HIGS, is obtained using the Fourier expansion of the output signal. In addition, this generalized HIGS is implemented in a PID structure controlling a double integrator system to validate the performance of the proposed filter in the time domain, in which changing the fractional variable from zero to one, the output varies from the response of a nonlinear control system to a linear one.
△ Less
Submitted 30 September, 2022; v1 submitted 28 April, 2022;
originally announced April 2022.
-
Continuous reset element: Transient and steady-state analysis for precision motion systems
Authors:
Nima Karbasizadeh,
S. Hassan HosseinNia
Abstract:
This paper addresses the main goal of using reset control in precision motion control systems, breaking of the well-known "Waterbed effect". A new architecture for reset elements will be introduced which has a continuous output signal as opposed to conventional reset elements. A steady-state precision study is presented, showing the steady-state precision is preserved while the peak of sensitivity…
▽ More
This paper addresses the main goal of using reset control in precision motion control systems, breaking of the well-known "Waterbed effect". A new architecture for reset elements will be introduced which has a continuous output signal as opposed to conventional reset elements. A steady-state precision study is presented, showing the steady-state precision is preserved while the peak of sensitivity is reduced. The architecture is then used for a "Constant in Gain Lead in Phase" (CgLp) element and a numerical analysis on transient response shows a significant improvement in transient response. It is shown that by following the presented guideline for tuning, settling time can be reduced and at the same time a non-overshoot step response can be achieved. A practical example is presented to verify the results and also to show that the proposed element can achieve a complex-order behaviour.
△ Less
Submitted 30 August, 2022; v1 submitted 25 October, 2021;
originally announced October 2021.
-
Stacking Integrators Without Sacrificing the Overshoot in Reset Control Systems
Authors:
Nima Karbasizadeh,
S. Hassan HosseinNia
Abstract:
According to the well-known loop-sha** control design approach, the steady-state precision of control systems can be improved by stacking integrators. However, due to the waterbed effect in linear control systems, such an action will worsen the transient response by increasing overshoot and creating wind-up problems. This paper presents a new architecture for rest control systems that can signif…
▽ More
According to the well-known loop-sha** control design approach, the steady-state precision of control systems can be improved by stacking integrators. However, due to the waterbed effect in linear control systems, such an action will worsen the transient response by increasing overshoot and creating wind-up problems. This paper presents a new architecture for rest control systems that can significantly decrease the overshoot and create a no-overshoot performance even in presence of stacked integrators. The steady-state analysis of the proposed system will also show that improved precision expected due to stacked integrators can be achieved as well. A numerical simulation study is presented to verify the results and the tuning guide presented.
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Time regularization as a solution to mitigate quantization induced performance degradation
Authors:
Bas Kieft,
S. Hassan HosseinNia,
Niranjan Saikumar
Abstract:
Reset control is known to be able to outperform PID and the like linear controllers. However, in motion control systems, quantization can cause severe performance degradation. This paper shows the application of time regularization to mitigate this practical issue in reset control systems. Numerical simulations have been conducted in order to analyze the cause of the quantization induced performan…
▽ More
Reset control is known to be able to outperform PID and the like linear controllers. However, in motion control systems, quantization can cause severe performance degradation. This paper shows the application of time regularization to mitigate this practical issue in reset control systems. Numerical simulations have been conducted in order to analyze the cause of the quantization induced performance degradation and the effectiveness of time regularization to mitigate this degradation; with tuning guidelines for the time regularization parameter also provided. Moreover, a robustness analysis is performed. The solution is also tested experimentally on a high precision motion system for validation. It is estimated by numerical simulations that time regularization can reduce quantization induced performance degradation by almost 10 dB. Experiments have similarly shown a reduction of several dB for the high precision motion stage.
△ Less
Submitted 30 October, 2020;
originally announced November 2020.
-
Reset band for mitigatation of quantization induced performance degradation
Authors:
Bas Kieft,
S. Hassan HosseinNia,
Niranjan Saikumar
Abstract:
Reset control has emerged as a viable alternative to popular PID, capable of outperforming and overcoming the linear limitations. However, in motion control systems, quantization can cause severe performance degradation. This paper investigates this degradation in practical systems and re-purposes the reset band condition in order to mitigate the same. Numerical simulations have been conducted on…
▽ More
Reset control has emerged as a viable alternative to popular PID, capable of outperforming and overcoming the linear limitations. However, in motion control systems, quantization can cause severe performance degradation. This paper investigates this degradation in practical systems and re-purposes the reset band condition in order to mitigate the same. Numerical simulations have been conducted on a mass based positioning system to analyze the cause of the quantization induced performance degradation. Moreover, a performance and robustness analysis was performed with the proposed solution. Finally, novel tuning guidelines are provided for estimating the required reset band parameter. Additionally, practical experiments have been conducted on a high precision motion system for validation. The experiments show by example that the reset band can reduce the error in the problematic region by up to 285% and hence shows the need and effectiveness of the proposed solution.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Adaptive Feedforward Control For Reset Feedback Control Systems -- Application in Precision Motion Control
Authors:
Karst Brummelhuis,
Niranjan Saikumar,
Jan-Willem van Wingerden,
S. Hassan HosseinNia
Abstract:
This paper presents a novel adaptive feedforward controller design for reset control systems. The combination of feedforward and reset feedback control promises high performance as the feedforward guarantees reference tracking, while the non-linear feedback element rejects disturbances. To overcome inevitable model mismatches, the feedforward controller adapts to increase precision in reference tr…
▽ More
This paper presents a novel adaptive feedforward controller design for reset control systems. The combination of feedforward and reset feedback control promises high performance as the feedforward guarantees reference tracking, while the non-linear feedback element rejects disturbances. To overcome inevitable model mismatches, the feedforward controller adapts to increase precision in reference tracking. Where linear existing adaptive feedforward controllers do not guarantee convergence in the presence of reset, this work presents a novel adaptive law based on converging and diverging regions of adaptation to achieve good tracking. Experimental results demonstrate the claimed advantage of the novel method.
△ Less
Submitted 30 October, 2020;
originally announced October 2020.
-
Frequency-Domain Modelling of Reset Control Systems using an Impulsive Description
Authors:
R. N. Buitenhuis,
N. Saikumar,
S. H. HosseinNia
Abstract:
The ever-increasing industry desire for improved performance makes linear controller design run into fundamental limitations. Nonlinear control methods such as Reset Control (RC) are needed to overcome these. RC is a promising candidate since, unlike other nonlinear methods, it easily integrates into the industry-preferred PID design framework. Thus far, RC has been analysed in the frequency domai…
▽ More
The ever-increasing industry desire for improved performance makes linear controller design run into fundamental limitations. Nonlinear control methods such as Reset Control (RC) are needed to overcome these. RC is a promising candidate since, unlike other nonlinear methods, it easily integrates into the industry-preferred PID design framework. Thus far, RC has been analysed in the frequency domain either through describing function analysis or by direct closed-loop numerical computation. The former computes a simplified closed-loop RC response by assuming a sufficient low-pass behaviour. In doing so it ignores all harmonics, which literature has found to cause significant modelling prediction errors. The latter gives a precise solution, but by its direct closed-loop computation does not clearly show how open-loop RC design translates to closed-loop performance. The main contribution of this work is aimed at overcoming these limitations by considering an alternative approach for modelling RC using state-dependent impulse inputs. This permits accurately computing closed-loop RC behaviour starting from the underlying linear system, improving system understanding. A frequency-domain description for closed-loop RC is obtained, which is solved analytically by using several well-defined assumptions. This analytical solution is verified using a simulated high-precision stage, critically examining sources of modelling errors. The accuracy of the proposed method is further substantiated using controllers designed for various specifications.
△ Less
Submitted 30 September, 2020; v1 submitted 28 September, 2020;
originally announced September 2020.
-
Fractional-Order Single State Reset Element
Authors:
Nima Karbasizadeh,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
This paper proposes a fractional-order reset element whose architecture allows for the suppression of nonlinear effects for a range of frequencies. Suppressing the nonlinear effects of a reset element for the desired frequency range while maintaining it for the rest is beneficial, especially when it is used in the framework of a "Constant in gain, Lead in phase" (CgLp) filter. CgLp is a newly intr…
▽ More
This paper proposes a fractional-order reset element whose architecture allows for the suppression of nonlinear effects for a range of frequencies. Suppressing the nonlinear effects of a reset element for the desired frequency range while maintaining it for the rest is beneficial, especially when it is used in the framework of a "Constant in gain, Lead in phase" (CgLp) filter. CgLp is a newly introduced nonlinear filter, bound to circumvent the well-known linear control limitation -- the waterbed effect. The ideal behaviour of such a filter in the frequency domain is unity gain while providing a phase lead for a broad range of frequencies. However, CgLp's ideal behaviour is based on the describing function, which is a first-order approximation that neglects the effects of the higher-order harmonics in the output of the filter. Although CgLp is fundamentally a nonlinear filter, its nonlinearity is not required for all frequencies. Thus, it is shown in this paper that using the proposed reset element architecture, CgLp gets closer to its ideal behaviour for a range of frequencies, and its performance will be improved accordingly.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Band-Passing Nonlinearity in Reset Elements
Authors:
Nima Karbasizadeh,
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
This paper addresses nonlinearity in reset elements and their effects. Reset elements are known for having less phase lag compared to their linear counterparts; however, they are nonlinear elements and produce higher-order harmonics. This paper investigates the higher-order harmonics for reset elements with one resetting state and proposes an architecture and a method of design which allows for ba…
▽ More
This paper addresses nonlinearity in reset elements and their effects. Reset elements are known for having less phase lag compared to their linear counterparts; however, they are nonlinear elements and produce higher-order harmonics. This paper investigates the higher-order harmonics for reset elements with one resetting state and proposes an architecture and a method of design which allows for band-passing the nonlinearity and its effects, namely, higher-order harmonics and phase advantage. The nonlinearity of reset elements is not entirely useful for all frequencies, e.g., they are useful for reducing phase lag at cross-over frequency region; however, higher-order harmonics can compromise tracking and disturbance rejection performance at lower frequencies. Using proposed "phase sha**" method, one can selectively suppress nonlinearity of a single-state reset element in a desired range of frequencies and allow the nonlinearity to provide its phase benefit in a different desired range of frequencies. This can be especially useful for the reset elements in the framework of "Constant in gain, Lead in phase" (CgLp) filter, which is a newly introduced nonlinear filter, bound to circumvent the well-known linear control limitation -- the waterbed effect.
△ Less
Submitted 13 September, 2020;
originally announced September 2020.
-
Tuning of Constant in gain Lead in phase (CgLp) Reset Controller using higher-order sinusoidal input describing function (HOSIDF)
Authors:
Xiaojun Hou,
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
S. H. HosseinNia
Abstract:
Due to development of technology, linear controllers cannot satisfy requirements of high-tech industry. One solution is using nonlinear controllers such as reset elements to overcome this big barrier. In literature, the Constant in gain Lead in phase (CgLp) compensator is a novel reset element developed to overcome the inherent linear controller limitations. However, a tuning guideline for these c…
▽ More
Due to development of technology, linear controllers cannot satisfy requirements of high-tech industry. One solution is using nonlinear controllers such as reset elements to overcome this big barrier. In literature, the Constant in gain Lead in phase (CgLp) compensator is a novel reset element developed to overcome the inherent linear controller limitations. However, a tuning guideline for these controllers has not been proposed so far. In this paper, a recently developed method named higher-order sinusoidal input describing function (HOSIDF), which gives deeper insight into the frequency behaviour of non-linear controllers compared to sinusoidal input describing function (DF), is used to obtain a straight-forward tuning method for CgLp compensators. In this respect, comparative analyses on tracking performance of these compensators are carried out. Based on these analyses, tuning guidelines for CgLp compensators are developed and validated on a high-tech precision positioning stage. The results show the effectiveness of the developed tuning method.
△ Less
Submitted 10 September, 2020;
originally announced September 2020.
-
Frequency Domain Stability Method for Reset Systems
Authors:
Ali Ahmadi Dastjerdi,
Alessandro Astolfi,
S. H. HosseinNia
Abstract:
Today, linear PID controllers cannot satisfy requirements of high-precision industry due to the development of technology. According to the literature, reset controllers can overcome this important barrier. However, similar to other non-linear controllers, stability analysis for these controllers is complex and needs parametric models of the systems. Consequently, the applicability of these contro…
▽ More
Today, linear PID controllers cannot satisfy requirements of high-precision industry due to the development of technology. According to the literature, reset controllers can overcome this important barrier. However, similar to other non-linear controllers, stability analysis for these controllers is complex and needs parametric models of the systems. Consequently, the applicability of these controllers may diminish in industry. The well-known Hb method is one of the solutions of this significant problem. Nevertheless, assessing the Hb condition in the frequency-domain is complex, particularly for high dimensional plants. Furthermore, it cannot assess UBIBS stability of reset control systems in the case of reseting to non-zero values. In this paper, the aforementioned problems have been solved for the first and second order reset elements and a frequency-domain approach for assessing stability of reset control systems is developed. Finally, some practical examples are presented to demonstrate the effectiveness of the proposed approach to use the frequency response measurement directly to assess the stability.
△ Less
Submitted 24 August, 2021; v1 submitted 28 August, 2020;
originally announced September 2020.
-
Loop-sha** for reset control systems -- A higher-order sinusoidal-input describing functions approach
Authors:
Niranjan Saikumar,
Kars Heinen,
S. Hassan HosseinNia
Abstract:
The ever-growing demands on speed and precision from the precision motion industry have pushed control requirements to reach the limitations of linear control theory. Nonlinear controllers like reset provide a viable alternative since they can be easily integrated into the existing linear controller structure and designed using industry-preferred loop-sha** techniques. However, currently, loop-s…
▽ More
The ever-growing demands on speed and precision from the precision motion industry have pushed control requirements to reach the limitations of linear control theory. Nonlinear controllers like reset provide a viable alternative since they can be easily integrated into the existing linear controller structure and designed using industry-preferred loop-sha** techniques. However, currently, loop-sha** is achieved using the describing function (DF) and performance analysed using linear control sensitivity functions not applicable for reset control systems, resulting in a significant deviation between expected and practical results. We overcome this major bottleneck to the wider adaptation of reset control with two contributions in this paper. First, we present the extension of frequency-domain tools for reset controllers in the form of higher-order sinusoidal-input describing functions (HOSIDFs) providing greater insight into their behaviour. Second, we propose a novel method which uses the DF and HOSIDFs of the open-loop reset control system for the estimation of the closed-loop sensitivity functions, establishing for the first time - the relation between open-loop and closed-loop behaviour of reset control systems in the frequency domain. The accuracy of the proposed solution is verified in both simulation and practice on a precision positioning stage and these results are further analysed to obtain insights into the tuning considerations for reset controllers.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
The optimal sequence for reset controllers
Authors:
Chengwai Cai,
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
S. H. HosseinNia
Abstract:
PID controllers cannot satisfy the high performance requirements since they are restricted by the water-bed effect. Thus, the need for a better alternative to linear PID controllers increases due to the rising demands of the high-tech industry. This has led many researchers to explore nonlinear controllers like reset control. Although reset controllers have been widely used to overcome the limitat…
▽ More
PID controllers cannot satisfy the high performance requirements since they are restricted by the water-bed effect. Thus, the need for a better alternative to linear PID controllers increases due to the rising demands of the high-tech industry. This has led many researchers to explore nonlinear controllers like reset control. Although reset controllers have been widely used to overcome the limitations of linear controllers in literature, the performance of the system varies depending on the relative sequence of controller linear and nonlinear parts. In this paper, the optimal sequence is found using high order sinusoidal input describing functions (HOSIDF). By arranging controller parts according to this strategy, better performance in the sense of precision and control input is achieved. The performance of the proposed sequence is validated on a precision positioning setup. The experimental results demonstrate that the optimal sequence found in theory outperforms other sequences.
△ Less
Submitted 28 May, 2020;
originally announced May 2020.
-
Tuning of CgLp based reset controllers: Application in precision positioning systems
Authors:
Mahmoud Shirdast Bahnamiri,
Nima Karbasizadeh,
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
This paper presents the tuning of a reset-based element called "Constant in gain and Lead in phase" (CgLp) in order to achieve desired precision performance in tracking and steady state. CgLp has been recently introduced to overcome the inherent linear control limitation - the waterbed effect. The analysis of reset controllers including ones based on CgLp is mainly carried out in the frequency dom…
▽ More
This paper presents the tuning of a reset-based element called "Constant in gain and Lead in phase" (CgLp) in order to achieve desired precision performance in tracking and steady state. CgLp has been recently introduced to overcome the inherent linear control limitation - the waterbed effect. The analysis of reset controllers including ones based on CgLp is mainly carried out in the frequency domain using describing function with the assumption that the relatively large magnitude of the first harmonic provides a good approximation. While this is true for several cases, the existence of higher-order harmonics in the output of these elements complicates their analysis and tuning in the control design process for high precision motion applications, where they cannot be neglected. While some numerical observation-based approaches have been considered in literature for the tuning of CgLp elements, a systematic approach based on the analysis of higher-order harmonics is found to be lacking. This paper analyzes the CgLp behaviour from the perspective of first as well as higher-order harmonics and presents simple relations between the tuning parameters and the gain-phase behaviour of all the harmonics, which can be used for better tuning of these elements. The presented relations are used for tuning a controller for a high-precision positioning stage and results used for validation.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Tuning of a Class of Reset Elements Using Pseudo-Sensitivities
Authors:
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
S. H. HosseinNia
Abstract:
Currently, the demand for a better alternative to linear PID controllers is increasing due to the rising expectations of the high-tech industry. In literature, it has been shown that Constant in gain Lead in phase (CgLp) compensators, which are a type of reset element, have high potential to improve the performance of systems. Although there are few works which investigate tuning of these compensa…
▽ More
Currently, the demand for a better alternative to linear PID controllers is increasing due to the rising expectations of the high-tech industry. In literature, it has been shown that Constant in gain Lead in phase (CgLp) compensators, which are a type of reset element, have high potential to improve the performance of systems. Although there are few works which investigate tuning of these compensators, the high order harmonics and steady-state performances have not yet been considered in these methods. Recently, a frequencydomain framework has been developed to analyze closed-loop performances of reset control systems which includes high order harmonics. In this paper, this frequency-domain framework is combined with loop-sha** constraints to provide a reliable frequency-domain tuning method for CgLp compensators. Finally, different performance metrics of a CgLp compensator are compared with those of a PID controller on a precision positioning stage. The results show that the presented tuning method is effective, and the system with the CgLp compensator achieves superior dynamic performance to that of the PID controller.
△ Less
Submitted 22 November, 2020; v1 submitted 6 May, 2020;
originally announced May 2020.
-
A Frequency-Domain Stability Method for Reset Systems
Authors:
Ali Ahmadi Dastjerdi,
Alessandro Astolfi,
S. Hassan HosseinNia
Abstract:
Nowadays, the demand for an alternative to linear PID controllers has increased because of the rising expectations of the high-precision industry. The potential of reset controllers to solve this important challenge has been extensively demonstrated in the literature. However, similarly to other non-linear controllers, the stability analysis for these controllers is complex and relies on parametri…
▽ More
Nowadays, the demand for an alternative to linear PID controllers has increased because of the rising expectations of the high-precision industry. The potential of reset controllers to solve this important challenge has been extensively demonstrated in the literature. However, similarly to other non-linear controllers, the stability analysis for these controllers is complex and relies on parametric models of the systems which may hinder the applicability of these controllers in industry. The well-known Hbeta method tries to solve this significant issue. However, assessing the H\b{eta} condition in the frequency-domain is complex, especially for high dimensional plants. In addition, it cannot be used to assess UBIBS stability of reset control systems in the case of reseting to non-zero values. These problems have been solved in this paper for the first order reset elements, and an easy-to-use frequency approach for assessing stability of reset control systems is proposed. The effectiveness of the proposed approach is demonstrated through a practical example.
△ Less
Submitted 6 May, 2020;
originally announced May 2020.
-
Benefiting from Linear Behaviour of a Nonlinear Reset-based Element at Certain Frequencies
Authors:
Nima Karbasizadeh,
Ali Ahmadi Dastjerdi,
Niranjan Saikumar,
Duarte Valerio,
S. Hassan HosseinNia
Abstract:
This paper addresses a phenomenon caused by resetting only one of the two states of a so-called second order "Constant in gain Lead in phase" (CgLp) element. CgLp is a recently introduced reset-based nonlinear element, bound to circumvent the well-known linear control limitation -- the waterbed effect. The ideal behaviour of such a filter in the frequency domain is unity gain while providing a pha…
▽ More
This paper addresses a phenomenon caused by resetting only one of the two states of a so-called second order "Constant in gain Lead in phase" (CgLp) element. CgLp is a recently introduced reset-based nonlinear element, bound to circumvent the well-known linear control limitation -- the waterbed effect. The ideal behaviour of such a filter in the frequency domain is unity gain while providing a phase lead for a broad range of frequencies, which clearly violates the linear Bode's gain phase relationship. However, CgLp's ideal behaviour is based on a describing function, which is a first order approximation that neglects the effects of higher order harmonics in the output of the filter. Consequently, achieving the ideal behaviour is challenging when higher order harmonics are relatively large. It is shown in this paper that by resetting only one of the two states of a second order CgLp, the nonlinear filter will act as a linear one at a certain frequency, provided that some conditions are met. This phenomenon can be used to the benefit of reducing higher order harmonics of CgLp's output and achieving the ideal behaviour and thus better performance in terms of precision.
△ Less
Submitted 7 April, 2020;
originally announced April 2020.
-
Closed-Loop Frequency Analysis of Reset Control Systems
Authors:
Ali Ahmadi Dastjerdi,
A. Astolfi,
Niranjan Saikumar,
N. Karbasizadeh,
Duarte Valerio,
S. Hassan HosseinNia
Abstract:
This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as t…
▽ More
This paper introduces a closed-loop frequency analysis tool for reset control systems. To begin with sufficient conditions for the existence of the steady-state response for a closed-loop system with a reset element and driven by periodic references are provided. It is then shown that, under specific conditions, such a steady-state response for periodic inputs is periodic with the same period as the input. Furthermore, a framework to obtain the steady-state response and to define a notion of closed-loop frequency response, including high order harmonics, is presented. Finally, pseudo-sensitivities for reset control systems are defined. These simplify the analysis of this class of systems and allow a direct software implementation of the analysis tool. To show the effectiveness of the proposed analysis method the position control problem for a precision positioning stage is studied. In particular, comparison with the results achieved using methods based on the Describing Function shows that the proposed method achieves superior closed-loop performance.
△ Less
Submitted 24 November, 2020; v1 submitted 28 January, 2020;
originally announced January 2020.
-
Complex order control for improved loop-sha** in precision positioning
Authors:
Niranjan Saikumar,
Duarte Valério,
S. Hassan HosseinNia
Abstract:
This paper presents a complex order filter developed and subsequently integrated into a PID-based controller design. The nonlinear filter is designed with reset elements to have describing function based frequency response similar to that of a linear (practically non-implementable) complex order filter. This allows for a design which has a negative gain slope and a corresponding positive phase slo…
▽ More
This paper presents a complex order filter developed and subsequently integrated into a PID-based controller design. The nonlinear filter is designed with reset elements to have describing function based frequency response similar to that of a linear (practically non-implementable) complex order filter. This allows for a design which has a negative gain slope and a corresponding positive phase slope as desired from a loop-sha** controller-design perspective. This approach enables improvement in precision tracking without compromising the bandwidth or stability requirements. The proposed designs are tested on a planar precision positioning stage and performance compared with PID and other state-of-the-art reset based controllers to showcase the advantages of this filter.
△ Less
Submitted 22 July, 2019;
originally announced July 2019.
-
Reset Control for Vibration Disturbance Rejection
Authors:
Erdi Akyüz,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
The high tech industry which requires fast stable motion with nanometer precision continues to mainly use PID which is limited by fundamental linear control limitations. Floor vibrations as disturbance significantly affect performance and their rejection is particularly affected by these limitations. Reset control has provided a promising alternative to surpass these, while simultaneously allowing…
▽ More
The high tech industry which requires fast stable motion with nanometer precision continues to mainly use PID which is limited by fundamental linear control limitations. Floor vibrations as disturbance significantly affect performance and their rejection is particularly affected by these limitations. Reset control has provided a promising alternative to surpass these, while simultaneously allowing the use of industry standard loop-sha** during design. However, the reset action introduced higher order harmonics can induce unwanted dynamics and negatively influence performance. This paper investigates two reset control strategies namely (1) band-pass phase lag reduction and (2) phase compensation to reduce the negative effects of higher order harmonics. The strategies are tested on a precision positioning stage for vibration rejection and the results show that phase compensation provides better performance compared to other tested strategies.
△ Less
Submitted 20 July, 2019;
originally announced July 2019.
-
Development of Robust Fractional-Order Reset Control
Authors:
Linda Chen,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
In this paper, a framework for the combination of robust fractional order CRONE control with non-linear reset is given for both first and second generation CRONE control. General design rules are derived and presented for these CRONE reset controllers. Within this framework, fractional order control allows for better tuning of the open-loop responses on the one hand. On the other, reset control en…
▽ More
In this paper, a framework for the combination of robust fractional order CRONE control with non-linear reset is given for both first and second generation CRONE control. General design rules are derived and presented for these CRONE reset controllers. Within this framework, fractional order control allows for better tuning of the open-loop responses on the one hand. On the other, reset control enables a reduction in phase lag and a corresponding increase in phase margin compared to linear control for similar open loop gain profile. Hence, the combination of the two control methods can provide well-tuned open-loop responses that can overcome the fundamental linear control limitation of Bode's gain-phase relationship. Moreover, as established loop-sha** concepts are used in the controller design, CRONE reset can be highly compatible with the industry. The designed CRONE reset controllers are validated on a one degree-of-freedom Lorentz-actuated precision positioning stage. On this setup, CRONE reset control is shown to provide better tracking performance compared to linear CRONE control, which is in agreement with the predicted performance improvement.
△ Less
Submitted 1 October, 2019; v1 submitted 20 June, 2018;
originally announced June 2018.
-
Resetting Disturbance Observers with application in Compensation of bounded nonlinearities like Hysteresis in Piezo-Actuators
Authors:
Niranjan Saikumar,
Rahul Kumar Sinha,
S. Hassan HosseinNia
Abstract:
This paper presents a novel nonlinear (reset) disturbance observer for dynamic compensation of bounded nonlinearities like hysteresis in piezoelectric actuators. Proposed Resetting Disturbance Observer (RDOB) utilizes a novel Constant-gain Lead-phase (CgLp) element based on the concept of reset control. The fundamental limitations of linear DOB which results in contradictory requirements and in a…
▽ More
This paper presents a novel nonlinear (reset) disturbance observer for dynamic compensation of bounded nonlinearities like hysteresis in piezoelectric actuators. Proposed Resetting Disturbance Observer (RDOB) utilizes a novel Constant-gain Lead-phase (CgLp) element based on the concept of reset control. The fundamental limitations of linear DOB which results in contradictory requirements and in a dependent design between DOB and feedback controller are analysed. Two different configurations of RDOB which attempt to alleviate these problems from different perspectives are presented and an example plant is used to highlight the improvement. Stability criteria are presented for both configurations. Performance improvement seen with both RDOB configurations compared to linear DOB is also verified on a practical piezoelectric setup for hysteresis compensation and results analysed.
△ Less
Submitted 18 June, 2018;
originally announced June 2018.
-
'Constant in gain Lead in phase' element - Application in precision motion control
Authors:
Niranjan Saikumar,
Rahul Kumar Sinha,
S. Hassan HosseinNia
Abstract:
This work presents a novel 'Constant in gain Lead in phase' (CgLp) element using nonlinear reset technique. PID is the industrial workhorse even to this day in high-tech precision positioning applications. However, Bode's gain phase relationship and waterbed effect fundamentally limit performance of PID and other linear controllers. This paper presents CgLp as a controlled nonlinear element which…
▽ More
This work presents a novel 'Constant in gain Lead in phase' (CgLp) element using nonlinear reset technique. PID is the industrial workhorse even to this day in high-tech precision positioning applications. However, Bode's gain phase relationship and waterbed effect fundamentally limit performance of PID and other linear controllers. This paper presents CgLp as a controlled nonlinear element which can be introduced within the framework of PID allowing for wide applicability and overcoming linear control limitations. Design of CgLp with generalized first order reset element (GFORE) and generalized second order reset element (GSORE) (introduced in this work) is presented using describing function analysis. A more detailed analysis of reset elements in frequency domain compared to existing literature is first carried out for this purpose. Finally, CgLp is integrated with PID and tested on one of the DOFs of a planar precision positioning stage. Performance improvement is shown in terms of tracking, steady-state precision and bandwidth.
△ Less
Submitted 28 September, 2018; v1 submitted 31 May, 2018;
originally announced May 2018.
-
Beyond the Waterbed Effect: Development of Fractional Order CRONE Control with Non-Linear Reset
Authors:
Linda Chen,
Niranjan Saikumar,
Simone Baldi,
S. Hassan HosseinNia
Abstract:
In this paper a novel reset control synthesis method is proposed: CRONE reset control, combining a robust fractional CRONE controller with non-linear reset control to overcome waterbed effect. In CRONE control, robustness is achieved by creation of constant phase behaviour around bandwidth with the use of fractional operators, also allowing more freedom in sha** the open-loop frequency response.…
▽ More
In this paper a novel reset control synthesis method is proposed: CRONE reset control, combining a robust fractional CRONE controller with non-linear reset control to overcome waterbed effect. In CRONE control, robustness is achieved by creation of constant phase behaviour around bandwidth with the use of fractional operators, also allowing more freedom in sha** the open-loop frequency response. However, being a linear controller it suffers from the inevitable trade-off between robustness and performance as a result of the waterbed effect. Here reset control is introduced in the CRONE design to overcome the fundamental limitations. In the new controller design, reset phase advantage is approximated using describing function analysis and used to achieve better open-loop shape. Sufficient quadratic stability conditions are shown for the designed CRONE reset controllers and the control design is validated on a Lorentz-actuated nanometre precision stage. It is shown that for similar phase margin, better performance in terms of reference-tracking and noise attenuation can be achieved.
△ Less
Submitted 25 May, 2018;
originally announced May 2018.
-
No More Differentiator in PID:Development of Nonlinear Lead for Precision Mechatronics
Authors:
Arun Palanikumar,
Niranjan Saikumar,
S. Hassan HosseinNia
Abstract:
Industrial PID consists of three elements: Lag (integrator), Lead (Differentiator) and Low Pass Filters (LPF). PID being a linear control method is inherently bounded by the waterbed effect due to which there exists a trade-off between precision \& tracking, provided by Lag and LPF on one side and stability \& robustness, provided by Lead on the other side. Nonlinear reset strategies applied in La…
▽ More
Industrial PID consists of three elements: Lag (integrator), Lead (Differentiator) and Low Pass Filters (LPF). PID being a linear control method is inherently bounded by the waterbed effect due to which there exists a trade-off between precision \& tracking, provided by Lag and LPF on one side and stability \& robustness, provided by Lead on the other side. Nonlinear reset strategies applied in Lag and LPF elements have been very effective in reducing this trade-off. However, there is lack of study in develo** a reset Lead element. In this paper, we develop a novel lead element which provides higher precision and stability compared to the linear lead filter and can be used as a replacement for the same. The concept is presented and validated on a Lorentz-actuated nanometer precision stage. Improvements in precision, tracking and bandwidth are shown through two separate designs. Performance is validated in both time and frequency domain to ensure that phase margin achieved on the practical setup matches design theories.
△ Less
Submitted 24 May, 2018;
originally announced May 2018.
-
Hybrid Systems and Control With Fractional Dynamics (II): Control
Authors:
S. Hassan HosseinNia,
Ines Tejado,
Blas M. Vinagre
Abstract:
No mixed research of hybrid and fractional-order systems into a cohesive and multifaceted whole can be found in the literature. This paper focuses on such a synergistic approach of the theories of both branches, which is believed to give additional flexibility and help the system designer. It is part II of two companion papers and focuses on fractional-order hybrid control. Specifically, two types…
▽ More
No mixed research of hybrid and fractional-order systems into a cohesive and multifaceted whole can be found in the literature. This paper focuses on such a synergistic approach of the theories of both branches, which is believed to give additional flexibility and help the system designer. It is part II of two companion papers and focuses on fractional-order hybrid control. Specifically, two types of such techniques are reviewed, including robust control of switching systems and different strategies of reset control. Simulations and experimental results are given to show the effectiveness of the proposed strategies. Part I will introduce the fundamentals of fractional-order hybrid systems, in particular, modelling and stability of two kinds of such systems, i.e., fractional-order switching and reset control systems.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Hybrid Systems and Control With Fractional Dynamics (I): Modeling and Analysis
Authors:
S. Hassan HosseinNia,
Ines Tejado,
Blas M. Vinagre
Abstract:
No mixed research of hybrid and fractional-order systems into a cohesive and multifaceted whole can be found in the literature. This paper focuses on such a synergistic approach of the theories of both branches, which is believed to give additional flexibility and help to the system designer. It is part I of two companion papers and introduces the fundamentals of fractional-order hybrid systems, i…
▽ More
No mixed research of hybrid and fractional-order systems into a cohesive and multifaceted whole can be found in the literature. This paper focuses on such a synergistic approach of the theories of both branches, which is believed to give additional flexibility and help to the system designer. It is part I of two companion papers and introduces the fundamentals of fractional-order hybrid systems, in particular, modeling and stability analysis of two kinds of such systems, i.e., fractional-order switching and reset control systems. Some examples are given to illustrate the applicability and effectiveness of the developed theory. Part II will focus on fractional-order hybrid control.
△ Less
Submitted 24 July, 2014;
originally announced July 2014.
-
Fractional Order Hybrid Systems and Their Stability
Authors:
S. Hassan HosseinNia,
Inés Tejado,
Blas M. Vinagre
Abstract:
This paper deals with hybrid systems (HS) with fractional order dynamics and their stability. The stability of two particular types of fractional order hybrid systems (FOHS), i.e., switching and reset control systems, is studied. Common Lyapunov method, as well as its frequency domain equivalence, are generalized for the former systems and, for the latter, H$_β$-condition is used --frequency domai…
▽ More
This paper deals with hybrid systems (HS) with fractional order dynamics and their stability. The stability of two particular types of fractional order hybrid systems (FOHS), i.e., switching and reset control systems, is studied. Common Lyapunov method, as well as its frequency domain equivalence, are generalized for the former systems and, for the latter, H$_β$-condition is used --frequency domain equivalence of Lyapunov-like method for reset control systems. The applicability and efficiency of the proposed methods are shown by some illustrative examples.
△ Less
Submitted 21 March, 2013;
originally announced March 2013.
-
Basic Properties and Stability of Fractional-Order Reset Control Systems
Authors:
S. Hassan HosseinNia,
Inés Tejado,
Blas M Vinagre
Abstract:
Reset control is introduced to overcome limitations of linear control. A reset controller includes a linear controller which resets some of states to zero when their input is zero or certain non-zero values. This paper studies the application of the fractional-order Clegg integrator (FCI) and compares its performance with both the commonly used first order reset element (FORE) and traditional Cleg…
▽ More
Reset control is introduced to overcome limitations of linear control. A reset controller includes a linear controller which resets some of states to zero when their input is zero or certain non-zero values. This paper studies the application of the fractional-order Clegg integrator (FCI) and compares its performance with both the commonly used first order reset element (FORE) and traditional Clegg integrator (CI). Moreover, stability of reset control systems is generalized for the fractional-order case. Two examples are given to illustrate the application of the stability theorem.
△ Less
Submitted 21 March, 2013;
originally announced March 2013.