-
Study of 5G base station antenna array performance for self-interference reduction
Authors:
Bing Xue,
Katsuyuki Haneda,
Clemens Icheln
Abstract:
The study of 5G base station antenna array performance for self-interference reduction is derived. The line of sight signal channel model and Rayleigh channel model are developed. The relevant calculations for channel capacities are shown. This is the pre-material for this study. More results and conclusions will be presented soon.
The study of 5G base station antenna array performance for self-interference reduction is derived. The line of sight signal channel model and Rayleigh channel model are developed. The relevant calculations for channel capacities are shown. This is the pre-material for this study. More results and conclusions will be presented soon.
△ Less
Submitted 23 May, 2024;
originally announced May 2024.
-
Permittivity Characterization of Human Skin Based on a Quasi-optical System at Sub-THz
Authors:
Bing Xue,
Juha Tuomela,
Katsuyuki Haneda,
Clemens Icheln,
Juha Ala-Laurinaho
Abstract:
This paper introduces a novel approach to experimentally characterize effective human skin permittivity at sub-Terahertz (sub-THz) frequencies, specifically from $140$~to $210$~GHz, utilizing a quasi-optical measurement system. To ensure accurate measurement of the reflection coefficients of human skin, a planar, rigid, and thick reference plate with a low-loss dielectric is utilized to flatten th…
▽ More
This paper introduces a novel approach to experimentally characterize effective human skin permittivity at sub-Terahertz (sub-THz) frequencies, specifically from $140$~to $210$~GHz, utilizing a quasi-optical measurement system. To ensure accurate measurement of the reflection coefficients of human skin, a planar, rigid, and thick reference plate with a low-loss dielectric is utilized to flatten the human skin surface. A permittivity characterization method is proposed to reduce permittivity estimation deviations resulting from the pressure effects on the phase displacements of skins under the measurements but also to ensure repeatability of the measurement. In practical permittivity characterizations, the complex permittivities of the finger, palm, and arm of seven volunteers show small standard deviations for the repeated measurements, respectively, while those show significant variations across different regions of the skins and for different persons. The proposed measurement system holds significant potential for future skin permittivity estimation in sub-THz bands, facilitating further studies on human-electromagnetic-wave interactions based on the measured permittivity values.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Human Skin Permittivity Characterization for Mobile Handset Evaluation at Sub-THz
Authors:
Bing Xue,
Katsuyuki Haneda,
Clemens Icheln,
Juha Ala-Laurinaho
Abstract:
This manuscript proposes a method for characterizing the complex permittivity of the human finger skin based on an open-ended waveguide covered with a thin dielectric sheet at sub-terahertz frequencies. The measurement system is initially analyzed through full-wave simulations with a detailed finger model. Next, the model is simplified by replacing the finger with an infinite sheet of human skin t…
▽ More
This manuscript proposes a method for characterizing the complex permittivity of the human finger skin based on an open-ended waveguide covered with a thin dielectric sheet at sub-terahertz frequencies. The measurement system is initially analyzed through full-wave simulations with a detailed finger model. Next, the model is simplified by replacing the finger with an infinite sheet of human skin to calculate the forward electromagnetic problem related to the permittivity characterization. Following this, a radial basis network is employed to train the inverse problem solver. Finally, the complex permittivities of finger skins are characterized for 10 volunteers. The variations in complex relative permittivity across different individuals and skin regions are analyzed, revealing a deviation of $<\pm 1.5$ for both the dielectric constants and loss factors across 140 to 220 GHz. Repeated measurements at the same location on the finger demonstrate good repeatability with a relative estimation uncertainty $<\pm 1.5\%$.
△ Less
Submitted 23 May, 2024; v1 submitted 9 May, 2024;
originally announced May 2024.
-
Complex Permittivity Characterization of Low-Loss Dielectric Slabs at Sub-THz
Authors:
Bing Xue,
Katsuyuki Haneda,
Clemens Icheln,
Juha Tuomela
Abstract:
This manuscript presents a novel method for characterizing the permittivities of low-loss dielectric slabs in sub-terahertz (sub-THz) frequencies, specifically above 100 GHz using a quasi-optical system. The algorithm is introduced with detailed derivations, and the measurement sensitivity is analyzed through simulations. Subsequently, the method's validity is established via simulations, demonstr…
▽ More
This manuscript presents a novel method for characterizing the permittivities of low-loss dielectric slabs in sub-terahertz (sub-THz) frequencies, specifically above 100 GHz using a quasi-optical system. The algorithm is introduced with detailed derivations, and the measurement sensitivity is analyzed through simulations. Subsequently, the method's validity is established via simulations, demonstrating high accuracy (error 0.1% for the loss tangent) for a 30 mm thick plate material and relatively lower accuracy (error <5% for the loss tangent) for a 6 mm thick plate material. Notably, this accuracy surpasses that of the approach presented in [1] when the same window width is used to extract signals. Furthermore, a comparison between the permittivities of plexiglass with a 30 mm thickness characterized by the proposed method and the approach in [1] reveals a maximum difference in the dielectric constant of 0.011 and in loss tangent of 0.00071 from 140 to 220 GHz. Finally, the relative complex permittivities of plexiglass at 142.86 GHz obtained by both methods are compared with the reference values provided in [2], exhibiting differences of 0.06 in the dielectric constant.
△ Less
Submitted 9 May, 2024;
originally announced May 2024.
-
Characterization of Spatial-Temporal Channel Statistics from Indoor Measurement Data at D Band
Authors:
Chathuri Weragama,
Joonas Kokkoniemi,
Mar Francis De Guzman,
Katsuyuki Haneda,
Pekka Kyosti,
Markku Juntti
Abstract:
Millimeter-wave (mmWave) and D Band (110--170~GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond, owing to their ability to enhance performance metrics such as capacity, ultra-low latency, and spectral efficiency. This paper concentrates on deriving statistical insights into power, delay, and the number of paths based on measurements c…
▽ More
Millimeter-wave (mmWave) and D Band (110--170~GHz) frequencies are poised to play a pivotal role in the advancement of sixth-generation (6G) systems and beyond, owing to their ability to enhance performance metrics such as capacity, ultra-low latency, and spectral efficiency. This paper concentrates on deriving statistical insights into power, delay, and the number of paths based on measurements conducted across four distinct locations at a center frequency of 143.1 GHz. The findings underscore the suitability of various distributions in characterizing power behavior in line-of-sight (LOS) scenarios, including lognormal, Nakagami, gamma, and beta distributions, whereas the loglogistic distribution gives the optimal fit for power distribution in non-line-of-sight (NLOS) scenarios. Moreover, the exponential distribution shows to be the most appropriate model for the delay distribution in both LOS and NLOS scenarios. In terms of the number of paths, observations indicate a tendency for the highest concentration within the 10 m to 30 m distance range between the transmitter (Tx) and receiver (Rx). These insights shed light on the statistical nature of D band propagation characteristics, which are vital for informing the design and optimization of future 6G communication systems
△ Less
Submitted 27 March, 2024;
originally announced March 2024.
-
Ray-Optics Simulations of Outdoor-to-Indoor Multipath Channels at 4 and 14 GHz
Authors:
Pasi Koivumäki,
Aki Karttunen,
Katsuyuki Haneda
Abstract:
Radio wave propagation simulations based on the ray-optical approximation have been widely adopted in coverage analysis for a range of situations, including the outdoor-to-indoor scenario. This work presents O2I ray-tracing simulations utilizing a complete office building floor plan in the form of a laser-scanned point cloud. The simulated radio channels are compared to their measured counterparts…
▽ More
Radio wave propagation simulations based on the ray-optical approximation have been widely adopted in coverage analysis for a range of situations, including the outdoor-to-indoor scenario. This work presents O2I ray-tracing simulations utilizing a complete office building floor plan in the form of a laser-scanned point cloud. The simulated radio channels are compared to their measured counterparts at 4 and 14 GHz in terms of path loss and delay and angular spreads. Validation of channel simulations for the O2I case is rare, and so far non-existent for above-$6$~GHz bands. This work reveals the importance of a floor plan model in accurately simulating the channel; it is confirmed that path loss can be replicated with a simple interior path loss model in place of a detailed building interior model, but neglecting to model the interior results in high delay and angular spread errors. By modeling the interior, the ray-tracing simulations achieve relative mean error of under 10% for delay and angular spreads. Finally, effects of multi-layer insulating window on propagation simulations are reported. Noticeable variation of the penetration loss on a small change of the incident angle of a propagation path causes large changes in estimated coverage.
△ Less
Submitted 13 January, 2023; v1 submitted 6 October, 2022;
originally announced October 2022.
-
On the Feasibility of Out-of-Band Spatial Channel Information for Millimeter-Wave Beam Search
Authors:
Peize Zhang,
Pekka Kyösti,
Katsuyuki Haneda,
Pasi Koivumäki,
Wei Fan
Abstract:
The rollout of millimeter-wave (mmWave) cellular network enables us to realize the full potential of 5G/6G with vastly improved throughput and ultra-low latency. MmWave communication relies on highly directional transmission, which significantly increase the training overhead for fine beam alignment. The concept of using out-of-band spatial information to aid mmWave beam search is developed when m…
▽ More
The rollout of millimeter-wave (mmWave) cellular network enables us to realize the full potential of 5G/6G with vastly improved throughput and ultra-low latency. MmWave communication relies on highly directional transmission, which significantly increase the training overhead for fine beam alignment. The concept of using out-of-band spatial information to aid mmWave beam search is developed when multi-band systems operating in parallel. The feasibility of leveraging low-band channel information for coarse estimation of high-band beam directions strongly depends on the spatial congruence between two frequency bands. In this paper, we try to provide insights into the answers of two important questions. First, how similar is the power angular spectra (PAS) of radio channels between two well-separated frequency bands? Then, what is the impact of practical system configurations on spatial channel similarity? Specifically, the beam direction-based metric is proposed to measure the power loss and number of false directions if out-of-band spatial information is used instead of in-band information. This metric is more practical and useful than comparing normalized PAS directly. Point cloud ray-tracing and measurement results across multiple frequency bands and environments show that the degree of spatial similarity of beamformed channels is related to antenna beamwidth, frequency gap, and radio link conditions.
△ Less
Submitted 11 August, 2022; v1 submitted 4 August, 2022;
originally announced August 2022.
-
Impacts of Real Hands on 5G Millimeter-Wave Cellphone Antennas: Measurements and Electromagnetic Models
Authors:
Bing Xue,
Pasi Koivumaki,
Lauri Vaha-Savo,
Katsuyuki Haneda,
Clemens Icheln
Abstract:
Penetration of cellphones into markets requires their robust operation in time-varying radio environments, especially for millimeter-wave communications. Hands and fingers of a human cause significant changes in the physical environments of cellphones, which influence the communication qualities to a large extent. In this paper, electromagnetic models of real hands and cellphone antennas are devel…
▽ More
Penetration of cellphones into markets requires their robust operation in time-varying radio environments, especially for millimeter-wave communications. Hands and fingers of a human cause significant changes in the physical environments of cellphones, which influence the communication qualities to a large extent. In this paper, electromagnetic models of real hands and cellphone antennas are developed, and their efficacy is verified through measurements for the first time in the literature. Referential cellphone antenna arrays at $28$ and $39$~GHz are designed. Their radiation properties are evaluated through near-field scanning of the two prototypes, first in free space for calibration of the antenna measurement system and for building simplified models of the cellphone arrays. Next, radiation measurements are set up with real hands so that they are compared with electromagnetic simulations of the interaction between hands and simplified models of the arrays. The comparison showed a close agreement in terms of spherical coverage, indicating the efficacy of the hand and antenna array models along with the measurement approach. The repeatability of the measurements is $0.5$~dB difference in terms of cumulative distributions of the spherical coverage at the median level.
△ Less
Submitted 3 August, 2022;
originally announced August 2022.
-
Electromagnetic-Thermal Analyses of Distributed Antennas Embedded into a Load Bearing Wall
Authors:
Lauri Vähä-Savo,
Katsuyuki Haneda,
Clemens Icheln,
Xiaoshu Lü
Abstract:
The importance of indoor mobile connectivity has increased during the last years, especially during the Covid-19 pandemic. In contrast, new energy-efficient buildings contain structures like low-emissive windows and multi-layered thermal insulations which all block radio signals effectively. To solve this problem with indoor connectivity, we study passive antenna systems embedded in walls of low-e…
▽ More
The importance of indoor mobile connectivity has increased during the last years, especially during the Covid-19 pandemic. In contrast, new energy-efficient buildings contain structures like low-emissive windows and multi-layered thermal insulations which all block radio signals effectively. To solve this problem with indoor connectivity, we study passive antenna systems embedded in walls of low-energy buildings. We provide analytical models of a load bearing wall along with numerical and empirical evaluations of wideband back-to-back antenna spiral antenna system in terms of electromagnetic- and thermal insulation. The antenna systems are optimized to operate well when embedded into load bearing walls. Unit cell models of the antenna embedded load bearing wall, which are called signal-transmissive walls in this paper, are developed to analyze their electromagnetic and thermal insulation properties. We show that our signal-transmissive wall improves the electromagnetic transmission compared to a raw load bearing wall over a wide bandwidth of 2.6-8 GHz, covering most of the cellular new radio frequency range 1, without compromising the thermal insulation capability of the wall demanded by the building regulation. Optimized antenna deployment is shown with 22 dB improvement in electromagnetic transmission through the load bearing wall.
△ Less
Submitted 13 February, 2023; v1 submitted 13 July, 2022;
originally announced July 2022.
-
6G Radio Requirements to Support Integrated Communication, Localization, and Sensing
Authors:
Henk Wymeersch,
Aarno Pärssinen,
Traian E. Abrudan,
Andreas Wolfgang,
Katsuyuki Haneda,
Muris Sarajlic,
Marko E. Leinonen,
Musa Furkan Keskin,
Hui Chen,
Simon Lindberg,
Pekka Kyösti,
Tommy Svensson,
Xinxin Yang
Abstract:
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware archi…
▽ More
6G will be characterized by extreme use cases, not only for communication, but also for localization, and sensing. The use cases can be directly mapped to requirements in terms of standard key performance indicators (KPIs), such as data rate, latency, or localization accuracy. The goal of this paper is to go one step further and map these standard KPIs to requirements on signals, on hardware architectures, and on deployments. Based on this, system solutions can be identified that can support several use cases simultaneously. Since there are several ways to meet the KPIs, there is no unique solution and preferable configurations will be discussed.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Artificial intelligence enabled radio propagation for communications-Part II: Scenario identification and channel modeling
Authors:
Chen Huang,
Ruisi He,
Bo Ai,
Andreas F. Molisch,
Buon Kiong Lau,
Katsuyuki Haneda,
Bo Liu,
Cheng-Xiang Wang,
Mi Yang,
Claude Oestges,
Zhangdui Zhong
Abstract:
This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario iden…
▽ More
This two-part paper investigates the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. In Part I, we introduced AI and ML as well as provided a comprehensive survey on ML enabled channel characterization and antenna-channel optimization, and in this part (Part II) we review state-of-the-art literature on scenario identification and channel modeling here. In particular, the key ideas of ML for scenario identification and channel modeling/prediction are presented, and the widely used ML methods for propagation scenario identification and channel modeling and prediction are analyzed and compared. Based on the state-of-art, the future challenges of AI/ML-based channel data processing techniques are given as well.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Artificial intelligence enabled radio propagation for communications-Part I: Channel characterization and antenna-channel optimization
Authors:
Chen Huang,
Ruisi He,
Bo Ai,
Andreas F. Molisch,
Buon Kiong Lau,
Katsuyuki Haneda,
Bo Liu,
Cheng-Xiang Wang,
Mi Yang,
Claude Oestges,
Zhangdui Zhong
Abstract:
To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provid…
▽ More
To provide higher data rates, as well as better coverage, cost efficiency, security, adaptability, and scalability, the 5G and beyond 5G networks are developed with various artificial intelligence techniques. In this two-part paper, we investigate the application of artificial intelligence (AI) and in particular machine learning (ML) to the study of wireless propagation channels. It firstly provides a comprehensive overview of ML for channel characterization and ML-based antenna-channel optimization in this first part, and then it gives a state-of-the-art literature review of channel scenario identification and channel modeling in Part II. Fundamental results and key concepts of ML for communication networks are presented, and widely used ML methods for channel data processing, propagation channel estimation, and characterization are analyzed and compared. A discussion of challenges and future research directions for ML-enabled next generation networks of the topics covered in this part rounds off the paper.
△ Less
Submitted 23 November, 2021;
originally announced November 2021.
-
Integration of Communication and Sensing in 6G: a Joint Industrial and Academic Perspective
Authors:
Henk Wymeersch,
Deep Shrestha,
Carlos Morais de Lima,
Vijaya Yajnanarayana,
Björn Richerzhagen,
Musa Furkan Keskin,
Kim Schindhelm,
Alejandro Ramirez,
Andreas Wolfgang,
Mar Francis de Guzman,
Katsuyuki Haneda,
Tommy Svensson,
Robert Baldemair,
Stefan Parkvall
Abstract:
6G will likely be the first generation of mobile communication that will feature tight integration of localization and sensing with communication functionalities. Among several worldwide initiatives, the Hexa-X flagship project stands out as it brings together 25 key players from adjacent industries and academia, and has among its explicit goals to research fundamentally new radio access technolog…
▽ More
6G will likely be the first generation of mobile communication that will feature tight integration of localization and sensing with communication functionalities. Among several worldwide initiatives, the Hexa-X flagship project stands out as it brings together 25 key players from adjacent industries and academia, and has among its explicit goals to research fundamentally new radio access technologies and high-resolution localization and sensing. Such features will not only enable novel use cases requiring extreme localization performance, but also provide a means to support and improve communication functionalities. This paper provides an overview of the Hexa-X vision alongside the envisioned use cases. To close the required performance gap of these use cases with respect to 5G, several technical enablers will be discussed, together with the associated research challenges for the coming years.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Large-Scale Parameters of Spatio-Temporal Short-Range Indoor Backhaul Channels at 140 GHz
Authors:
Sinh L. H. Nguyen,
Katsuyuki Haneda,
Jan Järveläineny,
Aki Karttuneny,
Jyri Putkonen
Abstract:
The use of above-100 GHz radio frequencies would be one of promising approaches to enhance the fifth-generation cellular further. Any air interface and cellular network designs require channel models, for which measured evidence of largescale parameters such as pathloss, delay and angular spreads, is crucial. This paper provides the evidence from quasi-static spatiotemporal channel sounding campai…
▽ More
The use of above-100 GHz radio frequencies would be one of promising approaches to enhance the fifth-generation cellular further. Any air interface and cellular network designs require channel models, for which measured evidence of largescale parameters such as pathloss, delay and angular spreads, is crucial. This paper provides the evidence from quasi-static spatiotemporal channel sounding campaigns at two indoor hotspot (InH) scenarios at 140 GHz band, assuming short-range backhaul connectivity. The measured two InH sites are shop** mall and airport check-in hall. Our estimated omni-directional large-scale parameters from the measurements are found in good match with those of the Third Generation Partnership Project (3GPP) for new radios (NR) channel model in InH scenario, despite the difference of assumed link types and radio frequency range. The 3GPP NR channel model is meant for access links and said to be valid up to 100 GHz, while our measurements cover shortrange backhaul scenarios at 140 GHz. We found more deviation between our estimated large-scale parameters and those of the 3GPP NR channel model in the airport than in the shop** mall.
△ Less
Submitted 28 September, 2020;
originally announced September 2020.
-
Empirical Evaluation of a 28 GHz Antenna Array on a 5G Mobile Phone Using a Body Phantom
Authors:
Lauri Vähä-Savo,
Christian Cziezerski,
Mikko Heino,
Katsuyuki Haneda,
Clemens Icheln,
Ali Hazmi,
Ruiyuan Tian
Abstract:
Implementation of an antenna array on a 5G mobile phone chassis is crucial in ensuring the radio link quality especially at millimeter-waves. However, we generally lack the ability to design antennas under practical operational conditions involving body effects of a mobile user in a repeatable manner. We developed numerical and physical phantoms of a human body for evaluation of mobile handset ant…
▽ More
Implementation of an antenna array on a 5G mobile phone chassis is crucial in ensuring the radio link quality especially at millimeter-waves. However, we generally lack the ability to design antennas under practical operational conditions involving body effects of a mobile user in a repeatable manner. We developed numerical and physical phantoms of a human body for evaluation of mobile handset antennas at 28 GHz. While the numerical phantom retains a realistic and accurate body shape, our physical phantom has much simpler hexagonal cross-section to represent a body. Gains of the phased antenna array configuration on a mobile phone chassis, called co-located array is numerically and experimentally evaluated. The array is formed by placing two sets of 4-element dual-polarized patch antenna arrays, called two modules, at two locations of a mobile phone chassis. Modules are intended to collect the maximum amount of energy to the single transceiver chain. Spherical coverage of the realized gain by the array shows that the experimental statistics of the realized gains across entire solid angles agree with numerical simulations. We thereby demonstrate that our antenna evaluation method reproduces the reality and our phantom serves repeatable tests of antenna array prototypes at 28 GHz.
△ Less
Submitted 16 March, 2021; v1 submitted 14 September, 2020;
originally announced September 2020.
-
Standardization of Propagation Models: 800 MHz to 100 GHz -- A Historical Perspective
Authors:
Harsh Tataria,
Katsuyuki Haneda,
Andreas F. Molisch,
Mansoor Shafi,
Fredrik Tufvesson
Abstract:
Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations,…
▽ More
Propagation models constitute a fundamental building block of wireless communications research. Before we build and operate real systems, we must understand the science of radio propagation, and develop channel models that both reflect the important propagation processes and allow a fair comparison of different systems. In the past five decades, wireless systems have gone through five generations, from supporting voice applications to enhanced mobile broadband. To meet the ever increasing data rate demands of wireless systems, frequency bands covering a wide range from 800 MHz to 100 GHz have been allocated for use. The standardization of these systems started in the early/mid 1980's in Europe by the European Telecommunications Standards Institute with the advent of Global System for Mobile Communications. This motivated the development of the first standardized propagation model by the European Cooperation in Science and Technology (COST) 207 working group. These standardization activities were continued and expanded for the third, fourth, and fifth generations of COST, as well as by the Third Generation Partnership Project, and the International Telecommunication Union. This paper presents a historical overview of the standardized propagation models covering first to fifth-generation systems. In particular, we discuss the evolution and standardization of pathloss models, as well as large and small-scale fading parameters for single antenna and multiple antenna systems. Furthermore, we present insights into the progress of deterministic modelling across the five generations of systems, as well as discuss more advanced modelling components needed for the detailed simulations of millimeter-wave channels. A comprehensive bibliography at the end of the paper will aid the interested reader to dig deeper.
△ Less
Submitted 15 June, 2020;
originally announced June 2020.
-
Evaluation of Low Complexity Massive MIMO Techniques Under Realistic Channel Conditions
Authors:
Manijeh Bashar,
Alister G. Burr,
Katsuyuki Haneda,
Kanapathippillai Cumanan,
Mehdi M. Molu,
Mohsen Khalily,
Pei Xiao
Abstract:
A low complexity massive multiple-input multiple-output (MIMO) technique is studied with a geometry-based stochastic channel model, called COST 2100 model. We propose to exploit the discrete-time Fourier transform of the antenna correlation function to perform user scheduling. The proposed algorithm relies on a trade off between the number of occupied bins of the eigenvalue spectrum of the channel…
▽ More
A low complexity massive multiple-input multiple-output (MIMO) technique is studied with a geometry-based stochastic channel model, called COST 2100 model. We propose to exploit the discrete-time Fourier transform of the antenna correlation function to perform user scheduling. The proposed algorithm relies on a trade off between the number of occupied bins of the eigenvalue spectrum of the channel covariance matrix for each user and spectral overlap among the selected users. We next show that linear precoding design can be performed based only on the channel correlation matrix. The proposed scheme exploits the angular bins of the eigenvalue spectrum of the channel covariance matrix to build up an "approximate eigenchannels" for the users. We investigate the reduction of average system throughput with no channel state information at the transmitter (CSIT). Analysis and numerical results show that while the throughput slightly decreases due to the absence of CSIT, the complexity of the system is reduced significantly.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
A Study of Dynamic Multipath Clusters at 60 GHz in a Large Indoor Environment
Authors:
Manijeh Bashar,
Katsuyuki Haneda,
Alister G. Burr,
Kanapathippillai Cumanan
Abstract:
The available geometry-based stochastic channel models (GSCMs) at millimetre-wave (mmWave) frequencies do not necessarily retain spatial consistency for simulated channels, which is essential for small cells with ultra-dense users. In this paper, we work on cluster parameterization for the COST 2100 channel model using mobile channel simulations at 61 GHz in Helsinki Airport. The paper considers a…
▽ More
The available geometry-based stochastic channel models (GSCMs) at millimetre-wave (mmWave) frequencies do not necessarily retain spatial consistency for simulated channels, which is essential for small cells with ultra-dense users. In this paper, we work on cluster parameterization for the COST 2100 channel model using mobile channel simulations at 61 GHz in Helsinki Airport. The paper considers a ray-tracer which has been optimized to match measurements, to obtain double-directional channels at mmWave frequencies. A joint clustering-tracking framework is used to determine cluster parameters for the COST 2100 channel model. The KPowerMeans algorithm and the Kalman filter are exploited to identify the cluster positions and to predict and track cluster positions respectively. The results confirm that the joint clustering-and-tracking is a suitable tool for cluster identification and tracking for our ray-tracer results. The movement of cluster centroids, cluster lifetime and number of clusters per snapshot are investigated for this set of ray-tracer results. Simulation results show that the multipath components (MPCs) are grouped into clusters at mmWave frequencies.
△ Less
Submitted 2 September, 2018;
originally announced September 2018.
-
Antenna Systems for Wireless Capsule Endoscope: Design, Analysis and Experimental Validation
Authors:
Md. Suzan Miah,
Ahsan Noor khan,
Clemens Icheln,
Katsuyuki Haneda,
Ken-ichi Takizawa
Abstract:
Wireless capsule endoscopy (WCE) systems are used to capture images of the human digestive tract for medical applications. The antenna is one of the most important components in a WCE system. In this paper, we provide novel small antenna solutions for a WCE system operating at the 433 MHz ISM band. The in-body capsule transmitter uses an ultrawideband outer-wall conformal loop antenna, whereas the…
▽ More
Wireless capsule endoscopy (WCE) systems are used to capture images of the human digestive tract for medical applications. The antenna is one of the most important components in a WCE system. In this paper, we provide novel small antenna solutions for a WCE system operating at the 433 MHz ISM band. The in-body capsule transmitter uses an ultrawideband outer-wall conformal loop antenna, whereas the on-body receiver uses a printed monopole antenna with a partial ground plane. A colon-equivalent tissue phantom and CST Gustav voxel human body model were used for the numerical studies of the capsule antenna. The simulation results in the colon-tissue phantom were validated through in-vitro measurements using a liquid phantom. According to the phantom simulations, the capsule antenna has -10 dB impedance matching from 309 to 1104 MHz. The ultrawideband characteristic enables the capsule antenna to tolerate the detuning effects due to electronic modules in the capsule and due to the proximity of various different tissues in gastrointestinal tracts. The on-body antenna was numerically evaluated on the colon-tissue phantom and the CST Gustav voxel human body model, followed by in-vitro and ex-vivo measurements for validation. The on-body antenna exceeds -10 dB impedance matching from 390 MHz to 500 MHz both in simulations and measurements. Finally, this paper reports numerical and experimental studies of the path loss for the radio link between an in-body capsule transmitter and an on-body receiver using our antenna solutions. The path loss both in simulations and measurements is less than 50 dB for any capsule orientation and location.
△ Less
Submitted 4 April, 2018;
originally announced April 2018.
-
Modeling the Multipath Cross-Polarization Ratio for Above-6 GHz Radio Links
Authors:
Aki Karttunen,
Jan Järveläinen,
Sinh Le Hong Nguyen,
Katsuyuki Haneda
Abstract:
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover…
▽ More
In this paper, we parameterize an excess loss-based multipath component (MPC) cross-polarization ratio (XPR) model in indoor and outdoor environments for above-6 GHz frequency bands. The results are based on 28 measurement campaigns in several frequency bands ranging from 15 to 80 GHz. A conventional XPR model of an MPC assuming a constant mean value fits our measurements very poorly and moreover overestimates the depolarization effect. Our measurements revealed a clear trend that the MPC XPR is inversely proportional to an excess loss in reference to the free-space path loss. The model is physically sound as a higher excess loss is attributed to more lossy interactions or to a greater number of interactions with objects, leading to a greater chance of depolarization. The measurements furthermore showed that the MPC XPR is not strongly frequency or environment dependent. In our MPC XPR model, an MPC with zero-dB excess loss has a mean XPR of 28 dB. The mean XPR decreases half-a-dB as the excess loss increases by every dB and the standard deviation around the mean is 6 dB. The model is applicable to existing channel models to reproduce realistic MPC XPRs for the above 6-GHz radio links.
△ Less
Submitted 3 April, 2018;
originally announced April 2018.
-
Total Array Gains of Millimeter-Wave Mobile Phone Antennas Under Practical Conditions
Authors:
Katsuyuki Haneda,
Mikko Heino,
Jan Järveläinen
Abstract:
This paper studies a gain of an antenna array embedded on a mobile device operating at a millimeter-wave radio frequency. Assuming that mobile phones at millimeter-wave range operate with a single baseband unit and analog beamforming like phased arrays, we define a total array gain denoting a path gain of the phased antenna array in excess to the omni-directional path gain. The total array gain ci…
▽ More
This paper studies a gain of an antenna array embedded on a mobile device operating at a millimeter-wave radio frequency. Assuming that mobile phones at millimeter-wave range operate with a single baseband unit and analog beamforming like phased arrays, we define a total array gain denoting a path gain of the phased antenna array in excess to the omni-directional path gain. The total array gain circumvents the ambiguity of conventional array gain which cannot be uniquely defined as there are multiple choices of a reference single-element antenna in an array. Two types of 8-element patch antenna arrays implemented on a mobile phone chassis, i.e., uniform linear array (ULA) and distributed array (DA) both operating at 60 GHz, are studied. The gain evaluated in a small-cell scenario in an airport shows that DA achieves higher median and outage gain by up to 8 and 6 dB than ULA when different orientations of the mobile phone are considered along with body torso and finger shadowing. There are always postures of the mobile phone where ULA cannot see the line-of-sight due to directionality of the patch antenna and of body and finger shadowing, leading to outage gain of -15 dB in the worst case. The DA has much smaller variation of the gain across different orientations of the phone, even when the human torso shadowing and user's finger effects are considered.
△ Less
Submitted 23 February, 2018;
originally announced February 2018.
-
Comparing Radio Propagation Channels Between 28 and 140 GHz Bands in a Shop** Mall
Authors:
Sinh Le Hong Nguyen,
Jan Jarvelainen,
Aki Karttunen,
Katsuyuki Haneda,
Jyri Putkonen
Abstract:
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal t…
▽ More
In this paper, we compare the radio propagation channels characteristics between 28 and 140 GHz bands based on the wideband (several GHz) and directional channel sounding in a shop** mall environment. The measurements and data processing are conducted in such a way to meet requirements for a fair comparison of large- and small- scale channel parameters between the two bands. Our results reveal that there is high spatial-temporal correlation between 28 and 140 GHz channels, similar numbers of strong multipath components, and only small variations in the large-scale parameters between the two bands. Furthermore, when including the weak paths there are higher total numbers of clusters and paths in 28 GHz as compared to those in 140 GHz bands. With these similarities, it would be very interesting to investigate the potentials of using 140 GHz band in the future mobile radio communications.
△ Less
Submitted 26 December, 2017;
originally announced December 2017.
