-
Terahertz Communications and Sensing for 6G and Beyond: A Comprehensive Review
Authors:
Wei Jiang,
Qiuheng Zhou,
Jiguang He,
Mohammad Asif Habibi,
Sergiy Melnyk,
Mohammed El Absi,
Bin Han,
Marco Di Renzo,
Hans Dieter Schotten,
Fa-Long Luo,
Tarek S. El-Bawab,
Markku Juntti,
Merouane Debbah,
Victor C. M. Leung
Abstract:
Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this pape…
▽ More
Next-generation cellular technologies, commonly referred to as the 6G, are envisioned to support a higher system capacity, better performance, and network sensing capabilities. The THz band is one potential enabler to this end due to the large unused frequency bands and the high spatial resolution enabled by the short signal wavelength and large bandwidth. Different from earlier surveys, this paper presents a comprehensive treatment and technology survey on THz communications and sensing in terms of advantages, applications, propagation characterization, channel modeling, measurement campaigns, antennas, transceiver devices, beamforming, networking, the integration of communications and sensing, and experimental testbeds. Starting from the motivation and use cases, we survey the development and historical perspective of THz communications and sensing with the anticipated 6G requirements. We explore the radio propagation, channel modeling, and measurement for the THz band. The transceiver requirements, architectures, technological challenges, and state-of-the-art approaches to compensate for the high propagation losses, including appropriate antenna design and beamforming solutions. We overview several related technologies that either are required by or are beneficial for THz systems and networks. The synergistic design of sensing and communications is explored in depth. Practical trials, demonstrations, and experiments are also summarized. The paper gives a holistic view of the current state of the art and highlights the open research challenges towards 6G and beyond.
△ Less
Submitted 6 May, 2024; v1 submitted 19 July, 2023;
originally announced July 2023.
-
An early shutdown circuit for power reduction in high-precision dynamic comparators
Authors:
Nima Shahpari,
Mehdi Habibi,
Piero Malcovati
Abstract:
Dynamic comparators are an essential part of low-power analog to digital converters (ADCs) and are referred to as one of the most important building blocks in mixed mode circuits. The power consumption and accuracy of dynamic comparators directly affects the overall power consumption and effective number of bits of the ADC. In this paper, an early shutdown approach is proposed to deactivate the fi…
▽ More
Dynamic comparators are an essential part of low-power analog to digital converters (ADCs) and are referred to as one of the most important building blocks in mixed mode circuits. The power consumption and accuracy of dynamic comparators directly affects the overall power consumption and effective number of bits of the ADC. In this paper, an early shutdown approach is proposed to deactivate the first stage preamplifier at the suitable time. Furthermore, a time domain offset cancellation technique is incorporated to reduce offset effects. With the proposed method power consumption can be reduced in low power high precision dynamic comparators. The proposed method has been simulated in a standard 0.18μm CMOS technology and the results confirm its effectiveness. The proposed circuit has the ability of reducing the power consumption by 21.7% in the worst case, while having little effect on the speed and accuracy in comparison with the conventional methods. The proposed comparator consumes only 47μW while operating at 500MHz. Furthermore, Monte Carlo evaluations showed that the standard deviation of the residual input referred offset was 620μV.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
CNFET-based design of efficient ternary half adder and 1-trit multiplier circuits using dynamic logic
Authors:
Farzin Mahboob-Sardroudi,
Mehdi Habibi,
Mohammad-Hossein Moaiyeri
Abstract:
This paper presents a ternary half adder and a 1-trit multiplier using carbon nanotube transistors. The proposed circuits are designed using pass transistor logic and dynamic logic. Ternary logic uses less connections than binary logic, and less voltage changes are required for the same amount of data transmission. Carbon nanotube transistors have advantages over MOSFETs, such as the same mobility…
▽ More
This paper presents a ternary half adder and a 1-trit multiplier using carbon nanotube transistors. The proposed circuits are designed using pass transistor logic and dynamic logic. Ternary logic uses less connections than binary logic, and less voltage changes are required for the same amount of data transmission. Carbon nanotube transistors have advantages over MOSFETs, such as the same mobility for electrons and holes, the ability to adjust the threshold voltage by changing the nanotube diameter, and less leakage power. The proposed half adder has lower power consumption, delay, and fewer transistors compared to recent ternary half adders that use similar design methods. The proposed 1-trit multiplier also has a lower delay than other designs. Moreover, these advantages are achieved over a wide supply voltage range, operating temperatures, and output loads. The design is also more robust to process variations than the nearest design in terms of PDP.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
A signed pulse-train based image processor-array for parallel kernel convolution in vision sensors
Authors:
Ahmad Reza Danesh,
Mehdi Habibi
Abstract:
Purpose- High speed image processing is a challenging task for real-time applications such as product quality control of manufacturing lines. Smart image sensors use an array of in-pixel processors to facilitate high-speed real-time image processing. These sensors are usually used to perform the initial low-level bulk image filtering and enhancement. Design- In this paper, using pulse-width modula…
▽ More
Purpose- High speed image processing is a challenging task for real-time applications such as product quality control of manufacturing lines. Smart image sensors use an array of in-pixel processors to facilitate high-speed real-time image processing. These sensors are usually used to perform the initial low-level bulk image filtering and enhancement. Design- In this paper, using pulse-width modulated signals and regular nearest neighbor interconnections, a convolution image processor is presented. The presented processor is not only capable of processing arbitrary size kernels, but the kernel coefficients can be any arbitrary positive or negative floating number. Findings- The performance of the proposed architecture is evaluated on a FPGA platform. The peak signal-to-noise ratio (PSNR) metric is used to measure the computation error for different images, filters, and illuminations. Finally, the power consumption of the circuit in different operation conditions is presented. Originality/Value- The presented processor array can be used for high speed kernel convolution image processing tasks including arbitrary size edge detection and sharpening functions which require negative and fractional kernel values.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
Nanopore-Based DNA Sequencing Sensors and CMOS Readout Approaches
Authors:
Mehdi Habibi,
Yunus Dawji,
Ebrahim Ghafar-Zadeh,
Sebastian Magierowski
Abstract:
Purpose Nanopore-based molecular sensing and measurement, specifically Deoxyribonucleic acid (DNA) sequencing, is advancing at a fast pace. Some embodiments have matured from coarse particle counters to enabling full human genome assembly. This evolution has been powered not only by improvements in the sensors themselves, but also in the assisting microelectronic Complementary Metal Oxide Semicond…
▽ More
Purpose Nanopore-based molecular sensing and measurement, specifically Deoxyribonucleic acid (DNA) sequencing, is advancing at a fast pace. Some embodiments have matured from coarse particle counters to enabling full human genome assembly. This evolution has been powered not only by improvements in the sensors themselves, but also in the assisting microelectronic Complementary Metal Oxide Semiconductor (CMOS) readout circuitry closely interfaced to them. In this light, this paper reviews established and emerging nanopore-based sensing modalities considered for DNA sequencing and CMOS microelectronic methods currently being used. Design/methodology/approach Readout and amplifier circuits which are potentially appropriate for conditioning and conversion of nanopore signals for downstream processing are studied. Furthermore, arrayed CMOS readout implementations are focused on and the relevant status of the nanopore sensor technology is reviewed as well. Findings Ion channel nanopore devices have properties unique compared with other electrochemical cells. Currently biological nanopores are the only variants reported which can be used for actual DNA sequencing. The translocation rate of DNA through such pores, the current range at which these cells operate on and the cell capacitance effect, all impose the necessity of using low noise circuits in the process of signal detection. The requirement of using in-pixel low noise circuits in turn tends to impose challenges in the implementation of large size arrays. Originality/value The study presents an overview on the readout circuits used for signal acquisition in electrochemical cell arrays and investigates the specific requirements necessary for implementation of nanopore type electrochemical cell amplifiers and their associated readout electronics.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
A 0.4 V, 19 pW Subthreshold Voltage Reference Generator Using Separate Line Sensitivity and Temperature Coefficient Correction Stages
Authors:
Mohammad Azimi,
Mehdi Habibi,
Hamid-Reza Karimi-Alavijeh
Abstract:
Sensor nodes and IoT systems require blocks that not only consume low power but also have good accuracy. Voltage reference generators are also considered important building blocks in sensor interface circuits. This paper presents a solution to increase the accuracy of low power subthreshold voltage generators by lowering the circuit sensitivity to temperature and supply voltage variations. The enh…
▽ More
Sensor nodes and IoT systems require blocks that not only consume low power but also have good accuracy. Voltage reference generators are also considered important building blocks in sensor interface circuits. This paper presents a solution to increase the accuracy of low power subthreshold voltage generators by lowering the circuit sensitivity to temperature and supply voltage variations. The enhancement is achieved by using two separate stages for temperature coefficient (TC) and line sensitivity (LS) correction. A 0.18 μm standard CMOS process has been used for the proposed structure. The effects of parameter variations in the fabrication process are investigated using post-layout simulation and Monte Carlo analysis. In the supply voltage of 0.4 V to 2 V, an LS of 143.8 ppm/V is obtained. In typical corner conditions, the achieved TC is 7.45 ppm/{\circ}C over the temperature range of 0{\circ}C to 80{\circ}C. Due to process changes, and mainly affected by threshold voltage variations, the average TC can change to 39.2 ppm/{\circ}C. The minimum power consumption at 0{\circ}C and at a supply voltage of 0.4 V is 3.25 pW while the power consumption increases to 2.84 nW in 80{\circ}C and at the maximum supply voltage of 2 V.
△ Less
Submitted 5 October, 2021;
originally announced October 2021.
-
The Road Towards 6G: A Comprehensive Survey
Authors:
Wei Jiang,
Bin Han,
Mohammad Asif Habibi,
Hans Dieter Schotten
Abstract:
As of today, the fifth generation (5G) mobile communication system has been rolled out in many countries and the number of 5G subscribers already reaches a very large scale. It is time for academia and industry to shift their attention towards the next generation. At this crossroad, an overview of the current state of the art and a vision of future communications are definitely of interest. This a…
▽ More
As of today, the fifth generation (5G) mobile communication system has been rolled out in many countries and the number of 5G subscribers already reaches a very large scale. It is time for academia and industry to shift their attention towards the next generation. At this crossroad, an overview of the current state of the art and a vision of future communications are definitely of interest. This article thus aims to provide a comprehensive survey to draw a picture of the sixth generation (6G) system in terms of drivers, use cases, usage scenarios, requirements, key performance indicators (KPIs), architecture, and enabling technologies. First, we attempt to answer the question of "Is there any need for 6G?" by shedding light on its key driving factors, in which we predict the explosive growth of mobile traffic until 2030, and envision potential use cases and usage scenarios. Second, the technical requirements of 6G are discussed and compared with those of 5G with respect to a set of KPIs in a quantitative manner. Third, the state-of-the-art 6G research efforts and activities from representative institutions and countries are summarized, and a tentative roadmap of definition, specification, standardization, and regulation is projected. Then, we identify a dozen of potential technologies and introduce their principles, advantages, challenges, and open research issues. Finally, the conclusions are drawn to paint a picture of "What 6G may look like?". This survey is intended to serve as an enlightening guideline to spur interests and further investigations for subsequent research and development of 6G communications systems.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Platoon--assisted Vehicular Cloud in VANET: Vision and Challenges
Authors:
Meysam Nasimi,
Mohammad Asif Habibi,
Hans D. Schotten
Abstract:
Intelligent connected vehicles equipped with wireless sensors, intelligent control system, and communication devices are expected to commercially launch and emerge on road in short-term. These smart vehicles are able to partially/fully drive themselves; collect data from sensors, make and execute decisions based on that data; communicate with other vehicles, pedestrians, and nodes installed on the…
▽ More
Intelligent connected vehicles equipped with wireless sensors, intelligent control system, and communication devices are expected to commercially launch and emerge on road in short-term. These smart vehicles are able to partially/fully drive themselves; collect data from sensors, make and execute decisions based on that data; communicate with other vehicles, pedestrians, and nodes installed on the road; and provide infotainment and value-added services, such as broadband transmission of ultra-high definition video, files/apps downloading and uploading, online gaming, access to social media, audio/video conference streaming (office-in-car), live TV streaming, etc.; and so on. In addition, it is also possible for autonomous vehicles to form a "platoon" on road; maintaining close proximity in order to reduce the consumption of fuel and/or emission of gas, decrease costs, increase safety, and enhance the efficiency of the legacy transportation system. These emerging vehicular applications demand a large amount of computing and communication capacity to excel in their compute-intensive and latency-sensitive tasks. Based on these facts, the authors of this paper presented a visionary concept -- "platoon-assisted vehicular cloud" -- that exploits underutilized resources in platoons to augment vehicular cloud aiming to provide cost-effective and on-demand computing resources. Moreover, the authors presented three potential scenarios and explained the exploitation of platoon resources and roadside infrastructure to facilitate new applications. Besides system design, the paper did also summarize a number of open research challenges with the purpose of motivating new advances and potential solutions to this field.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
Transmit Power Optimization in Optical Coherent Transmission Systems: Analytical, Simulation, and Experimental Results
Authors:
Ramin Hashemi,
Mehdi Habibi,
Hamzeh Beyranvand,
Ali Emami,
Mahdi Hashemi,
Davood Ranjbar Rafie
Abstract:
In this paper, we propose to use the discretized version of the so-called Enhanced Gaussian Noise (EGN) model to estimate the non-linearity effects of fiber on the performance of optical coherent and uncompensated transmission (CUT) systems. By computing the power of non-linear interference noise and considering optical amplifier noise, we obtain the signal-to-noise (SNR) ratio and achievable rate…
▽ More
In this paper, we propose to use the discretized version of the so-called Enhanced Gaussian Noise (EGN) model to estimate the non-linearity effects of fiber on the performance of optical coherent and uncompensated transmission (CUT) systems. By computing the power of non-linear interference noise and considering optical amplifier noise, we obtain the signal-to-noise (SNR) ratio and achievable rate of CUT. To allocate the power of each CUT channel, we consider two optimization problems with the objectives of maximizing minimum SNR margin and achievable rate. We show that by using the discretized EGN model, the complexity of the introduced optimization problems is reduced compared with the existing optimization problems developed based on the so-called discretized Gaussian Noise (GN) model. In addition, the optimization based on the discretized EGN model leads to a better SNR and achievable rate. We validate our analytical results with simulations and experimental results. We simulate a five-channel coherent system on OptiSystem software, where a close agreement is observed between optimizations and simulations. Furthermore, we measured SNR of commercial 100Gbps coherent transmitter over 300 km single-mode fiber (SMF) and non-zero dispersion-shifted fiber (NZDSF), by considering single-channel and three-channel coherent systems. We observe there are performance gaps between experimental and analytical results, which is mainly due to other sources of noise such as transmitter imperfection noise, thermal noise, and shot noise, in experiments. By including these sources of noise in the analytical model, the gaps between analytical and experimental results are reduced.
△ Less
Submitted 15 February, 2020;
originally announced February 2020.
-
Lumen boundary detection using neutrosophic c-means in IVOCT images
Authors:
Mohammad Habibi,
Ahmad Ayatollahi,
Niyoosha Dallalazar,
Ali Kermani
Abstract:
In this paper, a novel method for lumen boundary identification is proposed using Neutrosophic c_means. This method clusters pixels of the intravascular optical coherence tomography image into several clusters using indeterminacy and Neutrosophic theory, which aims to detect the boundaries. Intravascular optical coherence tomography images are cross-sectional and high-resolution images which are t…
▽ More
In this paper, a novel method for lumen boundary identification is proposed using Neutrosophic c_means. This method clusters pixels of the intravascular optical coherence tomography image into several clusters using indeterminacy and Neutrosophic theory, which aims to detect the boundaries. Intravascular optical coherence tomography images are cross-sectional and high-resolution images which are taken from the coronary arterial wall. Coronary Artery Disease cause a lot of death each year. The first step for diagnosing this kind of diseases is to detect lumen boundary. Employing this approach, we obtained 0.972, 0.019, 0.076 mm2, 0.32 mm, and 0.985 as mean value for Jaccard measure (JACC), the percentage of area difference (PAD), average distance (AD), Hausdorff distance (HD), and dice index (DI), respectively. Based on our results, this method enjoys high accuracy performance.
△ Less
Submitted 16 February, 2019; v1 submitted 9 February, 2019;
originally announced February 2019.