-
Prescanning Assembly Optimization Criteria for Computed Tomography
Authors:
Mayank Goswami
Abstract:
Computerized Tomography assembly and system configuration are optimized for enhanced invertibility in sparse data reconstruction. Assembly generating maximum principal components/condition number of weight matrix is designated as best configuration. The gamma CT system is used for testing. The unoptimized sample location placement with 7.7% variation results in a maximum 50% root mean square error…
▽ More
Computerized Tomography assembly and system configuration are optimized for enhanced invertibility in sparse data reconstruction. Assembly generating maximum principal components/condition number of weight matrix is designated as best configuration. The gamma CT system is used for testing. The unoptimized sample location placement with 7.7% variation results in a maximum 50% root mean square error, 16.5% loss of similarity index, and 40% scattering noise in the reconstructed image relative to the optimized sample location when the proposed criteria are used. The method can help to automate the CT assembly, resulting in relatively artifact-free recovery and reducing the iteration to figure out the best scanning configuration for a given sample size, thus saving time, dosage, and operational cost.
△ Less
Submitted 29 September, 2023;
originally announced September 2023.
-
Learning to Segment from Noisy Annotations: A Spatial Correction Approach
Authors:
Jiachen Yao,
Yikai Zhang,
Songzhu Zheng,
Mayank Goswami,
Prateek Prasanna,
Chao Chen
Abstract:
Noisy labels can significantly affect the performance of deep neural networks (DNNs). In medical image segmentation tasks, annotations are error-prone due to the high demand in annotation time and in the annotators' expertise. Existing methods mostly assume noisy labels in different pixels are \textit{i.i.d}. However, segmentation label noise usually has strong spatial correlation and has prominen…
▽ More
Noisy labels can significantly affect the performance of deep neural networks (DNNs). In medical image segmentation tasks, annotations are error-prone due to the high demand in annotation time and in the annotators' expertise. Existing methods mostly assume noisy labels in different pixels are \textit{i.i.d}. However, segmentation label noise usually has strong spatial correlation and has prominent bias in distribution. In this paper, we propose a novel Markov model for segmentation noisy annotations that encodes both spatial correlation and bias. Further, to mitigate such label noise, we propose a label correction method to recover true label progressively. We provide theoretical guarantees of the correctness of the proposed method. Experiments show that our approach outperforms current state-of-the-art methods on both synthetic and real-world noisy annotations.
△ Less
Submitted 20 July, 2023;
originally announced August 2023.
-
AI pipeline for accurate retinal layer segmentation using OCT 3D images
Authors:
Mayank Goswami
Abstract:
Image data set from a multi-spectral animal imaging system is used to address two issues: (a) registering the oscillation in optical coherence tomography (OCT) images due to mouse eye movement and (b) suppressing the shadow region under the thick vessels/structures. Several classical and AI-based algorithms in combination are tested for each task to see their compatibility with data from the combi…
▽ More
Image data set from a multi-spectral animal imaging system is used to address two issues: (a) registering the oscillation in optical coherence tomography (OCT) images due to mouse eye movement and (b) suppressing the shadow region under the thick vessels/structures. Several classical and AI-based algorithms in combination are tested for each task to see their compatibility with data from the combined animal imaging system. Hybridization of AI with optical flow followed by Homography transformation is shown to be working (correlation value>0.7) for registration. Resnet50 backbone is shown to be working better than the famous U-net model for shadow region detection with a loss value of 0.9. A simple-to-implement analytical equation is shown to be working for brightness manipulation with a 1% increment in mean pixel values and a 77% decrease in the number of zeros. The proposed equation allows formulating a constraint optimization problem using a controlling factor α for minimization of number of zeros, standard deviation of pixel value and maximizing the mean pixel value. For Layer segmentation, the standard U-net model is used. The AI-Pipeline consists of CNN, Optical flow, RCNN, pixel manipulation model, and U-net models in sequence. The thickness estimation process has a 6% error as compared to manual annotated standard data.
△ Less
Submitted 15 February, 2023;
originally announced February 2023.
-
Weakly Supervised Classification of Vital Sign Alerts as Real or Artifact
Authors:
Arnab Dey,
Mononito Goswami,
Joo Heung Yoon,
Gilles Clermont,
Michael Pinsky,
Marilyn Hravnak,
Artur Dubrawski
Abstract:
A significant proportion of clinical physiologic monitoring alarms are false. This often leads to alarm fatigue in clinical personnel, inevitably compromising patient safety. To combat this issue, researchers have attempted to build Machine Learning (ML) models capable of accurately adjudicating Vital Sign (VS) alerts raised at the bedside of hemodynamically monitored patients as real or artifact.…
▽ More
A significant proportion of clinical physiologic monitoring alarms are false. This often leads to alarm fatigue in clinical personnel, inevitably compromising patient safety. To combat this issue, researchers have attempted to build Machine Learning (ML) models capable of accurately adjudicating Vital Sign (VS) alerts raised at the bedside of hemodynamically monitored patients as real or artifact. Previous studies have utilized supervised ML techniques that require substantial amounts of hand-labeled data. However, manually harvesting such data can be costly, time-consuming, and mundane, and is a key factor limiting the widespread adoption of ML in healthcare (HC). Instead, we explore the use of multiple, individually imperfect heuristics to automatically assign probabilistic labels to unlabeled training data using weak supervision. Our weakly supervised models perform competitively with traditional supervised techniques and require less involvement from domain experts, demonstrating their use as efficient and practical alternatives to supervised learning in HC applications of ML.
△ Less
Submitted 17 June, 2022;
originally announced June 2022.
-
IoT- Based Low-Cost Soil Moisture and Soil Temperature Monitoring System
Authors:
Guruprasad Deshpande,
Mangesh Goswami,
Jayesh Kolhe,
Vishal Khandagale,
Darshan Khope,
Gargi Patel,
Radhika Doijad,
Rajani P. K.,
Milind Mujumdar,
Bhupendra Bahadur Singh,
Naresh Ganeshi
Abstract:
Soil moisture (SM) is referred to as a finite amount of water molecules within the pore spaces and it is a crucial parameter of Hydro-Meteorological processes. The behaviour of soil moisture water changes spatially and temporally in response to topography, soil characteristics, and climate[1]. Soil moisture is overseen by various hydro-meteorological factors that vary vertically with depth, latera…
▽ More
Soil moisture (SM) is referred to as a finite amount of water molecules within the pore spaces and it is a crucial parameter of Hydro-Meteorological processes. The behaviour of soil moisture water changes spatially and temporally in response to topography, soil characteristics, and climate[1]. Soil moisture is overseen by various hydro-meteorological factors that vary vertically with depth, laterally across terrestrial shapes, and temporarily in feedback to the climate. The precise monitoring and quantification of high-resolution surface and subsurface soil moisture observations are very important [13]. This paper highlights the outcomes of the fieldwork carried out at IITM, Pune, wherein we have developed a soil moisture and temperature measurement system using Raspberry Pi and the Internet of things (IoT). The development is classified into three stages, the first stage includes the assembly of the sensor with the microprocessor. The deployment of the low-cost system, data generation, and communication through a wireless sensor network is part of the second stage. Finally, the third stage includes real-time data visualization using a mobile application and data server for analysing soil moisture and temperature. The soil moisture profile obtained through the sensor deployed is highly correlated (r=.9) with in-situ gravimetric observations, having a root mean square error (RMSE) of about 3.1%. Similarly, the temperature observations are well-matched with the in-situ standard temperature observation. Here we present the preliminary results and compare the accuracy with the state-of-the-art sensors.
△ Less
Submitted 23 May, 2022;
originally announced June 2022.
-
Characterization of 3D Printers and X-Ray Computerized Tomography
Authors:
Sunita Khod,
Akshay Dvivedi,
Mayank Goswami
Abstract:
The 3D printing process flow requires several inputs for the best printing quality. These settings may vary from sample to sample, printer to printer, and depend upon users' previous experience. The involved operational parameters for 3D Printing are varied to test the optimality. Thirty-eight samples are printed using four commercially available 3D printers, namely: (a) Ultimaker 2 Extended+, (b)…
▽ More
The 3D printing process flow requires several inputs for the best printing quality. These settings may vary from sample to sample, printer to printer, and depend upon users' previous experience. The involved operational parameters for 3D Printing are varied to test the optimality. Thirty-eight samples are printed using four commercially available 3D printers, namely: (a) Ultimaker 2 Extended+, (b) Delta Wasp, (c) Raise E2, and (d) ProJet MJP. The sample profiles contain uniform and non-uniform distribution of the assorted size of cubes and spheres with a known amount of porosity. These samples are scanned using X-Ray Computed Tomography system. Functional Imaging analysis is performed using AI-based segmentation codes to (a) characterize these 3D printers and (b) find Three-dimensional surface roughness of three teeth and one sandstone pebble (from riverbed) with naturally deposited layers is also compared with printed sample values. Teeth has best quality. It is found that ProJet MJP gives the best quality of printed samples with the least amount of surface roughness and almost near to the actual porosity value. As expected, 100% infill density value, best spatial resolution for printing or Layer height, and minimum nozzle speed give the best quality of 3D printing.
△ Less
Submitted 27 May, 2022;
originally announced June 2022.
-
Noise analysis, error estimates, and Gamma Radiation Measurement for limited detector computerized tomography application
Authors:
Kajal Kumari,
Mayank Goswami
Abstract:
Computed Tomography is one of the efficient and vital modalities of non-destructive techniques (NDT). Various factors influence the CT reconstruction result, including limited projection data, detector electronics optimization, background noise, detection noise, discretized nature of projection data, and many more. Radiation hardening and other aging factors that affect the operational settings ma…
▽ More
Computed Tomography is one of the efficient and vital modalities of non-destructive techniques (NDT). Various factors influence the CT reconstruction result, including limited projection data, detector electronics optimization, background noise, detection noise, discretized nature of projection data, and many more. Radiation hardening and other aging factors that affect the operational settings may require recalibration of electronics parameters. Two well-known exercises are utilized with the motivation to improve reliability and accuracy in inverse recovery. The first exercise brute-forces an optimal candidate from the set of calibration methods for minimum error in inverse recovery. The second exercise, Kanpur Theorem-1 (KT-1) examines if optimal calibration sets electronics to impart minimum noise. The mutual conformity between statistics-derived CLT and Riemann integral transform-based KT-1 is shown first time using gamma radiation measurement. The analysis shows that measurement data with normal distribution inflicts the least noise in inverse recovery.
△ Less
Submitted 16 May, 2022;
originally announced May 2022.
-
Weak Supervision for Affordable Modeling of Electrocardiogram Data
Authors:
Mononito Goswami,
Benedikt Boecking,
Artur Dubrawski
Abstract:
Analysing electrocardiograms (ECGs) is an inexpensive and non-invasive, yet powerful way to diagnose heart disease. ECG studies using Machine Learning to automatically detect abnormal heartbeats so far depend on large, manually annotated datasets. While collecting vast amounts of unlabeled data can be straightforward, the point-by-point annotation of abnormal heartbeats is tedious and expensive. W…
▽ More
Analysing electrocardiograms (ECGs) is an inexpensive and non-invasive, yet powerful way to diagnose heart disease. ECG studies using Machine Learning to automatically detect abnormal heartbeats so far depend on large, manually annotated datasets. While collecting vast amounts of unlabeled data can be straightforward, the point-by-point annotation of abnormal heartbeats is tedious and expensive. We explore the use of multiple weak supervision sources to learn diagnostic models of abnormal heartbeats via human designed heuristics, without using ground truth labels on individual data points. Our work is among the first to define weak supervision sources directly on time series data. Results show that with as few as six intuitive time series heuristics, we are able to infer high quality probabilistic label estimates for over 100,000 heartbeats with little human effort, and use the estimated labels to train competitive classifiers evaluated on held out test data.
△ Less
Submitted 9 January, 2022;
originally announced January 2022.
-
AI and conventional methods for UCT projection data estimation
Authors:
Ankur Kumar,
Prasunika Khare,
Mayank Goswami
Abstract:
A 2D Compact ultrasound computerized tomography (UCT) system is developed. Fully automatic post processing tools involving signal and image processing are developed as well. Square of the amplitude values are used in transmission mode with natural 1.5 MHz frequency and rise time 10.4 ns and fall time 8.4 ns and duty cycle of 4.32%. Highest peak to corresponding trough values are considered as tran…
▽ More
A 2D Compact ultrasound computerized tomography (UCT) system is developed. Fully automatic post processing tools involving signal and image processing are developed as well. Square of the amplitude values are used in transmission mode with natural 1.5 MHz frequency and rise time 10.4 ns and fall time 8.4 ns and duty cycle of 4.32%. Highest peak to corresponding trough values are considered as transmitting wave between transducers in direct line talk. Sensitivity analysis of methods to extract peak to corresponding trough per transducer are discussed in this paper. Total five methods are tested. These methods are taken from broad categories: (a) Conventional and (b) Artificial Intelligence (AI) based methods. Conventional methods, namely: (a) simple gradient based peak detection, (b) Fourier based, (c) wavelet transform are compared with AI based methods: (a) support vector machine (SVM), (b) artificial neural network (ANN). Classification step was performed as well to discard the signal which does not has contribution of transmission wave. It is found that conventional methods have better performance. Reconstruction error, accuracy, F-Score, recall, precision, specificity and MCC for 40 x 40 data 1600 data files are measured. Each data file contains 50,002 data point. Ten such data files are used for training the Neural Network. Each data file has 7/8 wave packets and each packet corresponds to one transmission amplitude data. Reconstruction error is found to be minimum for ANN method. Other performance indices show that FFT method is processing the UCT signal with best recovery.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
AI Algorithm for Mode Classification of PCF SPR Sensor Design
Authors:
Prasunika Khare,
Mayank Goswami
Abstract:
Photonic Crystal Fiber design based on surface plasmon resonance phenomenon (PCF SPR) is optimized before it is fabricated for a particular application. An artificial intelligence algorithm is evaluated here to increase the ease of the simulation process for common users. COMSOL MultiPhysics is used. The algorithm suggests best among eight standard machine learning and one deep learning model to a…
▽ More
Photonic Crystal Fiber design based on surface plasmon resonance phenomenon (PCF SPR) is optimized before it is fabricated for a particular application. An artificial intelligence algorithm is evaluated here to increase the ease of the simulation process for common users. COMSOL MultiPhysics is used. The algorithm suggests best among eight standard machine learning and one deep learning model to automatically select the desired mode, chosen visually by the experts otherwise. Total seven performance indices: namely Precision, Recall, Accuracy, F1-Score, Specificity, Matthew correlation coefficient, are utilized to make the optimal decision. Robustness towards variations in sensor geometry design is also considered as an optimal parameter. Several PCF-SPR based Photonic sensor designs are tested, and a large range optimal (based on phase matching) design is proposed. For this design algorithm has selected Support Vector Machine (SVM) as the best option with an accuracy of 96%, F1-Score is 95.83%, and MCC of 92.30%. The average sensitivity of the proposed sensor design with respect to change in refractive index (1.37-1.41) is 5500 nm/RIU. Resolution is 2.0498x10^(-5) RIU^(-1). The algorithm can be integrated into commercial software as an add-on or as a module in academic codes. The proposed novel step has saved approximately 75 minutes in the overall design process. The present work is equally applicable for mode selection of sensor other than PCF-SPR sensing geometries.
△ Less
Submitted 19 July, 2021; v1 submitted 9 July, 2021;
originally announced July 2021.
-
Deep Learning models for benign and malign Ocular Tumor Growth Estimation
Authors:
Mayank Goswami
Abstract:
Relatively abundant availability of medical imaging data has provided significant support in the development and testing of Neural Network based image processing methods. Clinicians often face issues in selecting suitable image processing algorithm for medical imaging data. A strategy for the selection of a proper model is presented here. The training data set comprises optical coherence tomograph…
▽ More
Relatively abundant availability of medical imaging data has provided significant support in the development and testing of Neural Network based image processing methods. Clinicians often face issues in selecting suitable image processing algorithm for medical imaging data. A strategy for the selection of a proper model is presented here. The training data set comprises optical coherence tomography (OCT) and angiography (OCT-A) images of 50 mice eyes with more than 100 days follow-up. The data contains images from treated and untreated mouse eyes. Four deep learning variants are tested for automatic (a) differentiation of tumor region with healthy retinal layer and (b) segmentation of 3D ocular tumor volumes. Exhaustive sensitivity analysis of deep learning models is performed with respect to the number of training and testing images using 8 eight performance indices to study accuracy, reliability/reproducibility, and speed. U-net with UVgg16 is best for malign tumor data set with treatment (having considerable variation) and U-net with Inception backbone for benign tumor data (with minor variation). Loss value and root mean square error (R.M.S.E.) are found most and least sensitive performance indices, respectively. The performance (via indices) is found to be exponentially improving regarding a number of training images. The segmented OCT-Angiography data shows that neovascularization drives the tumor volume. Image analysis shows that photodynamic imaging-assisted tumor treatment protocol is transforming an aggressively growing tumor into a cyst. An empirical expression is obtained to help medical professionals to choose a particular model given the number of images and types of characteristics. We recommend that the presented exercise should be taken as standard practice before employing a particular deep learning model for biomedical image analysis.
△ Less
Submitted 9 July, 2021;
originally announced July 2021.