Showing 1–35 of 35 results for author: González-Prelcic, N

Multicarrier ISAC: Advances in Waveform Design, Signal Processing and Learning under Non-Idealities

Authors: Visa Koivunen, Musa Furkan Keskin, Henk Wymeersch, Mikko Valkama, Nuria González-Prelcic

Abstract: This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna re… ▽ More This paper addresses the topic of integrated sensing and communications (ISAC) in 5G and emerging 6G wireless networks. ISAC systems operate within shared, congested or even contested spectrum, aiming to deliver high performance in both wireless communications and radio frequency (RF) sensing. The expected benefits include more efficient utilization of spectrum, power, hardware (HW) and antenna resources. Focusing on multicarrier (MC) systems, which represent the most widely used communication waveforms, it explores the co-design and optimization of waveforms alongside multiantenna transceiver signal processing for communications and both monostatic and bistatic sensing applications of ISAC. Moreover, techniques of high practical relevance for overcoming and even harnessing challenges posed by non-idealities in actual transceiver implementations are considered. To operate in highly dynamic radio environments and target scenarios, both model-based structured optimization and learning-based methodologies for ISAC systems are covered, assessing their adaptability and learning capabilities under real-world conditions. The paper presents trade-offs in communication-centric and radar-sensing-centric approaches, aiming for an optimized balance in densely used spectrum. △ Less

Submitted 26 June, 2024; originally announced June 2024.

Comments: To appear in IEEE Signal Processing Magazine

Integrated Monostatic Sensing and Full-Duplex Multiuser Communication for mmWave Systems

Authors: Murat Bayraktar, Nuria González-Prelcic, Mikko Valkama, Hao Chen, Charlie Jianzhong Zhang

Abstract: In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation… ▽ More In this paper, we propose a hybrid precoding/combining framework for communication-centric integrated sensing and full-duplex (FD) communication operating at mmWave bands. The designed precoders and combiners enable multiuser (MU) FD communication while simultaneously supporting monostatic sensing in a frequency-selective setting. The joint design of precoders and combiners involves the mitigation of self-interference (SI) caused by simultaneous transmission and reception at the FD base station (BS). Additionally, MU interference needs to be handled by the precoder/combiner design. The resulting optimization problem involves non-convex constraints since hybrid analog/digital architectures utilize networks of phase shifters. To solve the proposed problem, we separate the optimization of each precoder/combiner, and design each one of them while fixing the others. The precoders at the FD BS are designed by reformulating the communication and sensing constraints as signal-to-leakage-plus-noise ratio (SLNR) maximization problems that consider SI and MU interference as leakage. Furthermore, we design the frequency-flat analog combiner such that the residual SI at the FD BS is minimized under communication and sensing gain constraints. Finally, we design an interference-aware digital combining stage that separates MU signals and target reflections. The communication performance and sensing results show that the proposed framework efficiently supports both functionalities simultaneously. △ Less

Submitted 15 May, 2024; originally announced May 2024.

Comments: 13 pages, 7 figures

The Integrated Sensing and Communication Revolution for 6G: Vision, Techniques, and Applications

Authors: Nuria González-Prelcic, Musa Furkan Keskin, Ossi Kaltiokallio, Mikko Valkama, Davide Dardari, Xiao Shen, Yuan Shen, Murat Bayraktar, Henk Wymeersch

Abstract: Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that har… ▽ More Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that harnesses all these sensing data can not only enable additional sensing services, but also become more resilient to channel-dependent effects like blockage and better support adaptation in dynamic environments as networks reconfigure. In this paper, we provide a vision for integrated sensing and communication (ISAC) networks and an overview of how signal processing, optimization and machine learning techniques can be leveraged to make them a reality in the context of 6G. We also include some examples of the performance of several of these strategies when evaluated using a simulation framework based on a combination of ray tracing measurements and mathematical models that mix the digital and physical worlds. △ Less

Submitted 2 May, 2024; originally announced May 2024.

Channel Estimation and Hybrid Precoding for Frequency Selective Multiuser mmWave MIMO Systems

Authors: J. P. González-Coma, J. Rodríguez-Fernández, N. González-Prelcic, L. Castedo, R. W. Heath

Abstract: Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the cha… ▽ More Configuring the hybrid precoders and combiners in a millimeter wave (mmWave) multiuser (MU) multiple-input multiple-output (MIMO) system is challenging in frequency selective channels. In this paper, we develop a system that uses compressive estimation on the uplink to configure precoders and combiners for the downlink (DL). In the first step, the base station (BS) simultaneously estimates the channels from all the mobile stations (MSs) on each subcarrier. To reduce the number of measurements required, compressed sensing techniques are developed that exploit common support on the different subcarriers. In the second step, exploiting reciprocity and the channel estimates, the base station designs hybrid precoders and combiners. Two algorithms are developed for this purpose, with different performance and complexity tradeoffs: 1) a factorization of the purely digital solution, and 2) an iterative hybrid design. Extensive numerical experiments evaluate the proposed solutions comparing to state-of-the-art strategies, and illustrating design tradeoffs in overhead, complexity, and performance. △ Less

Submitted 29 January, 2024; originally announced January 2024.

Journal ref: IEEE J. Sel. Top. Signal Process., vol. 12, no. 2, pp. 353-367, May 2018

Hybrid Precoding and Combining for mmWave Full-Duplex Joint Radar and Communication Systems under Self-Interference

Authors: Murat Bayraktar, Nuria González-Prelcic, Hao Chen

Abstract: In the context of integrated sensing and communication (ISAC), a full-duplex (FD) transceiver can operate as a monostatic radar while maintaining communication capabilities. This paper investigates the design of precoders and combiners for a joint radar and communication (JRC) system at mmWave frequencies. The primary goal of the design is to guarantee certain performance in terms of some sensing… ▽ More In the context of integrated sensing and communication (ISAC), a full-duplex (FD) transceiver can operate as a monostatic radar while maintaining communication capabilities. This paper investigates the design of precoders and combiners for a joint radar and communication (JRC) system at mmWave frequencies. The primary goal of the design is to guarantee certain performance in terms of some sensing and communication metrics while minimizing the self-interference (SI) caused by FD operation and taking into account the hardware limitations coming from a hybrid MIMO architecture. Specifically, we introduce a generalized eigenvalue-based precoder design that considers the downlink user rate, the radar gain, and the SI suppression. Since the hybrid analog/digital architecture degrades the SI mitigation capability of the precoder, we further enhance SI suppression with the analog combiner. Our numerical results demonstrate that the proposed architecture achieves the required radar gain and SI mitigation while incurring a small loss in downlink spectral efficiency. Additionally, the numerical experiments also show that the use of orthogonal frequency division multiplexing (OFDM) radar with the proposed beamforming architecture results in highly accurate range and velocity estimates for the detected targets. △ Less

Submitted 1 April, 2024; v1 submitted 25 November, 2023; originally announced November 2023.

Comments: Accepted to 2024 IEEE International Conference on Communications. 6 pages, 4 figures

Sparse Recovery with Attention: A Hybrid Data/Model Driven Solution for High Accuracy Position and Channel Tracking at mmWave

Authors: Yun Chen, Nuria González-Prelcic, Takayuki Shimizu, Hongshen Lu, Chinmay Mahabal

Abstract: In this paper, we propose first a mmWave channel tracking algorithm based on multidimensional orthogonal matching pursuit algorithm (MOMP) using reduced sparsifying dictionaries, which exploits information from channel estimates in previous frames. Then, we present an algorithm to obtain the vehicle's initial location for the current frame by solving a system of geometric equations that leverage t… ▽ More In this paper, we propose first a mmWave channel tracking algorithm based on multidimensional orthogonal matching pursuit algorithm (MOMP) using reduced sparsifying dictionaries, which exploits information from channel estimates in previous frames. Then, we present an algorithm to obtain the vehicle's initial location for the current frame by solving a system of geometric equations that leverage the estimated path parameters. Next, we design an attention network that analyzes the series of channel estimates, the vehicle's trajectory, and the initial estimate of the position associated with the current frame, to generate a refined, high accuracy position estimate. The proposed system is evaluated through numerical experiments using realistic mmWave channel series generated by ray-tracing. The experimental results show that our system provides a 2D position tracking error below 20 cm, significantly outperforming previous work based on Bayesian filtering. △ Less

Submitted 26 August, 2023; originally announced August 2023.

Learning to Localize with Attention: from sparse mmWave channel estimates from a single BS to high accuracy 3D location

Authors: Yun Chen, Nuria González-Prelcic, Takayuki Shimizu, Hongsheng Lu

Abstract: One strategy to obtain user location information in a wireless network operating at millimeter wave (mmWave) is based on the exploitation of the geometric relationships between the channel parameters and the user position. These relationships can be easily built from the LoS path and/or first order reflections, but high resolution channel estimates are required for high accuracy. In this paper, we… ▽ More One strategy to obtain user location information in a wireless network operating at millimeter wave (mmWave) is based on the exploitation of the geometric relationships between the channel parameters and the user position. These relationships can be easily built from the LoS path and/or first order reflections, but high resolution channel estimates are required for high accuracy. In this paper, we consider a mmWave MIMO system based on a hybrid architecture, and develop first a low complexity channel estimation strategy based on MOMP suitable for high dimensional channels, as those associated to operating with large planar arrays. Then, a deep neural network (DNN) called PathNet is designed to classify the order of the estimated channel paths, so that only the line-of-sight (LOS) path and first order reflections are selected for localization purposes. Next, a 3D localization strategy exploiting the geometry of the environment is developed to operate in both LOS and non-line-of-sight (NLOS) conditions, while considering the unknown clock offset between the transmitter (TX) and the receiver (RX). Finally, a Transformer based network exploiting attention mechanisms called ChanFormer is proposed to refine the initial position estimate obtained from the geometric system of equations that connects user position and channel parameters. Simulation results obtained with realistic vehicular channels generated by ray tracing indicate that sub-meter accuracy (<= 0.45 m) can be achieved for 95% of the users in LOS channels, and for 50% of the users in NLOS conditions. △ Less

Submitted 30 June, 2023; originally announced July 2023.

Comments: Journal

Clock and Orientation-Robust Simultaneous Radio Localization and Map** at Millimeter Wave Bands

Authors: Felipe Gómez-Cuba, Gonzalo Feijoo-Rodríguez, Nuria González-Prelcic

Abstract: This paper proposes a radio simultaneous location and map** (radio-SLAM) scheme based on sparse multipath channel estimation. By leveraging sparse channel estimation schemes at millimeter wave bands, namely high resolution estimates of the multipath angle of arrival (AoA), time difference of arrival (TDoA), and angle of departure (AoD), we develop a radio-SLAM algorithm that operates without any… ▽ More This paper proposes a radio simultaneous location and map** (radio-SLAM) scheme based on sparse multipath channel estimation. By leveraging sparse channel estimation schemes at millimeter wave bands, namely high resolution estimates of the multipath angle of arrival (AoA), time difference of arrival (TDoA), and angle of departure (AoD), we develop a radio-SLAM algorithm that operates without any requirements of clock synchronization, receiver orientation knowledge, multiple anchor points, or two-way protocols. Thanks to the AoD information obtained via compressed sensing (CS) of the channel, the proposed scheme can estimate the receiver clock offset and orientation from a single anchor transmission, achieving sub-meter accuracy in a realistic typical channel simulation. △ Less

Submitted 27 December, 2022; originally announced December 2022.

Comments: This is the author's pre-print version of a paper accepted for presentation in IEEE WCNC 2023, Glasgow, Scotland

Separable multidimensional orthogonal matching pursuit and its application to joint localization and communication at mmWave

Authors: Joan Palacios, Nuria González-Prelcic

Abstract: Greedy sparse recovery has become a popular tool in many applications, although its complexity is still prohibitive when large sparsifying dictionaries or sensing matrices have to be exploited. In this paper, we formulate first a new class of sparse recovery problems that exploit multidimensional dictionaries and the separability of the measurement matrices that appear in certain problems. Then we… ▽ More Greedy sparse recovery has become a popular tool in many applications, although its complexity is still prohibitive when large sparsifying dictionaries or sensing matrices have to be exploited. In this paper, we formulate first a new class of sparse recovery problems that exploit multidimensional dictionaries and the separability of the measurement matrices that appear in certain problems. Then we develop a new algorithm, Separable Multidimensional Orthogonal Matching Pursuit (SMOMP), which can solve this class of problems with low complexity. Finally, we apply SMOMP to the problem of joint localization and communication at mmWave, and numerically show its effectiveness to provide, at a reasonable complexity, high accuracy channel and position estimations. △ Less

Submitted 31 October, 2022; originally announced October 2022.

Hybrid mmWave MIMO Systems under Hardware Impairments and Beam Squint: Channel Model and Dictionary Learning-aided Configuration

Authors: Hongxiang Xie, Joan Palacios, Nuria González-Prelcic

Abstract: Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for… ▽ More Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for all subcarriers, without considering the impacts of hardware impairments and beam squint. In this manuscript, we derive a general channel and signal model that explicitly incorporates the impacts of hardware impairments, practical pulse sha** functions, and beam squint, overcoming the limitations of mmWave MIMO channel and signal models commonly used in previous work. Then, we propose a dictionary learning (DL) algorithm to obtain the sparsifying dictionaries embedding hardware impairments, by considering the effect of beam squint without introducing it into the learning process. We also design a novel CS channel estimation algorithm under beam squint and hardware impairments, where the channel structures at different subcarriers are exploited to enable channel parameter estimation with low complexity and high accuracy. Numerical results demonstrate the effectiveness of the proposed DL and channel estimation strategy when applied to realistic mmWave channels. △ Less

Submitted 17 October, 2022; originally announced October 2022.

Multidimensional orthogonal matching pursuit: theory and application to high accuracy joint localization and communication at mmWave

Authors: Joan Palacios, Nuria González-Prelcic, Cristian Rusu

Abstract: Greedy approaches in general, and orthogonal matching pursuit in particular, are the most commonly used sparse recovery techniques in a wide range of applications. The complexity of these approaches is highly dependent on the size of the dictionary chosen to represent the sparse signal. When the dictionary has to be large to enable high accuracy reconstructions, greedy strategies might however inc… ▽ More Greedy approaches in general, and orthogonal matching pursuit in particular, are the most commonly used sparse recovery techniques in a wide range of applications. The complexity of these approaches is highly dependent on the size of the dictionary chosen to represent the sparse signal. When the dictionary has to be large to enable high accuracy reconstructions, greedy strategies might however incur in prohibitive complexity. In this paper, we propose first the formulation of a new type of sparse recovery problems where the sparse signal is represented by a set of independent and smaller dictionaries instead of a large single one. Then, we derive a low complexity multdimensional orthogonal matching pursuit (MOMP) strategy for sparse recovery with a multdimensional dictionary. The projection step is performed iteratively on every dimension of the dictionary while fixing all other dimensions to achieve high accuracy estimation at a reasonable complexity. Finally, we formulate the problem of high resolution time domain channel estimation at millimeter wave (mmWave) frequencies as a multidimensional sparse recovery problem that can be solved with MOMP. The channel estimates are later transformed into high accuracy user position estimates exploiting a new localization algorithm that leverages the particular geometry of indoor channels. Simulation results show the effectiveness of MOMP for high accuracy localization at millimeter wave frequencies when operating in realistic 3D scenarios, with practical MIMO architectures feasible at mmWave, and without resorting to perfect synchronization assumptions that simplify the problem. △ Less

Submitted 24 August, 2022; originally announced August 2022.

Enabling NLoS LEO Satellite Communications with Reconfigurable Intelligent Surfaces

Authors: Xiaowen Tian, Nuria Gonzalez-Prelcic, Takayuki Shimizu

Abstract: Low Earth Orbit (LEO) satellite communications (SatCom) are considered a promising solution to provide uninterrupted services in cellular networks. Line-of-sight (LoS) links between the LEO satellites and the ground users are, however, easily blocked in urban scenarios. In this paper, we propose to enable LEO SatCom in non-line-of-sight (NLoS) channels, as those corresponding to links to users in… ▽ More Low Earth Orbit (LEO) satellite communications (SatCom) are considered a promising solution to provide uninterrupted services in cellular networks. Line-of-sight (LoS) links between the LEO satellites and the ground users are, however, easily blocked in urban scenarios. In this paper, we propose to enable LEO SatCom in non-line-of-sight (NLoS) channels, as those corresponding to links to users in urban canyons, with the aid of reconfigurable intelligent surfaces (RISs). First, we derive the near field signal model for the satellite-RIS-user link. Then, we propose two deployments to improve the coverage of a RIS-aided link: down tilting the RIS located on the top of a building, and considering a deployment with RISs located on the top of opposite buildings. Simulation results show the effectiveness of using RISs in LEO SatCom to overcome blockages in urban canyons. Insights about the optimal tilt angle and the coverage extension provided by the deployment of an additional RIS are also provided. △ Less

Submitted 31 May, 2022; originally announced May 2022.

Comments: 6 pages, 6 figures, submitted to Globecom 2022

Optimizing the Deployment of Reconfigurable Intelligent Surfaces in MmWave Vehicular Systems

Authors: Xiaowen Tian, Nuria Gonzalez-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave (MmWave) systems are vulnerable to blockages, which cause signal drop and link outage. One solution is to deploy reconfigurable intelligent surfaces (RISs) to add a strong non-line-of-sight path from the transmitter to receiver. To achieve the best performance, the location of the deployed RIS should be optimized for a given site, considering the distribution of potential users and… ▽ More Millimeter wave (MmWave) systems are vulnerable to blockages, which cause signal drop and link outage. One solution is to deploy reconfigurable intelligent surfaces (RISs) to add a strong non-line-of-sight path from the transmitter to receiver. To achieve the best performance, the location of the deployed RIS should be optimized for a given site, considering the distribution of potential users and possible blockers. In this paper, we find the optimal location, height and downtilt of RIS working in a realistic vehicular scenario. Because of the proximity between the RIS and the vehicles, and the large electrical size of the RIS, we consider a 3D geometry including the elevation angle and near-field beamforming. We provide results on RIS configuration in terms of both coverage ratio and area-averaged rate. We find that the optimized RIS improves the average averaged rate fifty percent over the case without a RIS, as well as further improvements in the coverage ratio. △ Less

Submitted 30 May, 2022; originally announced May 2022.

Comments: 6 pages, 5 figures, submitted to Globecom 2022

Low complexity joint position and channel estimation at millimeter wave based on multidimensional orthogonal matching pursuit

Authors: Joan Palacios, Nuria González-Prelcic, Cristian Rusu

Abstract: Compressive approaches provide a means of effective channel high resolution channel estimates in millimeter wave MIMO systems, despite the use of analog and hybrid architectures. Such estimates can also be used as part of a joint channel estimation and localization solution. Achieving good localization performance, though, requires high resolution channel estimates and better methods to exploit th… ▽ More Compressive approaches provide a means of effective channel high resolution channel estimates in millimeter wave MIMO systems, despite the use of analog and hybrid architectures. Such estimates can also be used as part of a joint channel estimation and localization solution. Achieving good localization performance, though, requires high resolution channel estimates and better methods to exploit those channels. In this paper, we propose a low complexity multidimensional orthogonal matching pursuit strategy for compressive channel estimation based by operating with a product of independent dictionaries for the angular and delay domains, instead of a global large dictionary. This leads to higher quality channel estimates but with lower complexity than generalizations of conventional solutions. We couple this new algorithm with a novel localization formulation that does not rely on the absolute time of arrival of the LoS path and exploits the structure of reflections in indoor channels. We show how the new approach is able to operate in realistic 3D scenarios to estimate the communication channel and locate devices in an indoor simulation setting. △ Less

Submitted 7 April, 2022; originally announced April 2022.

Comments: Submitted to EUSIPCO 2022

Joint Initial Access and Localization in Millimeter Wave Vehicular Networks: a Hybrid Model/Data Driven Approach

Authors: Yun Chen, Joan Palacios, Nuria González-Prelcic, Takayuki Shimizu, Hongsheng Lu

Abstract: High resolution compressive channel estimation provides information for vehicle localization when a hybrid mmWave MIMO system is considered. Complexity and memory requirements can, however, become a bottleneck when high accuracy localization is required. An additional challenge is the need of path order information to apply the appropriate geometric relationships between the channel path parameter… ▽ More High resolution compressive channel estimation provides information for vehicle localization when a hybrid mmWave MIMO system is considered. Complexity and memory requirements can, however, become a bottleneck when high accuracy localization is required. An additional challenge is the need of path order information to apply the appropriate geometric relationships between the channel path parameters and the vehicle, RSU and scatterers position. In this paper, we propose a low complexity channel estimation strategy of the angle of departure and time difference of arrival based on multidimensional orthogonal matching pursuit. We also design a deep neural network that predicts the order of the channel paths so only the LoS and first order reflections are used for localization. Simulation results obtained with realistic vehicular channels generated by ray tracing show that sub-meter accuracy can be achieved for 50% of the users, without resorting to perfect synchronization assumptions or unfeasible all-digital high resolution MIMO architectures. △ Less

Submitted 4 April, 2022; originally announced April 2022.

Multidimensional Orthogonal Matching Pursuit-based RIS-aided Joint Localization and Channel Estimation at mmWave

Authors: Murat Bayraktar, Joan Palacios, Nuria González-Prelcic, Charlie Jianzhong Zhang

Abstract: RIS-aided millimeter wave wireless systems benefit from robustness to blockage and enhanced coverage. In this paper, we study the ability of RIS to also provide enhanced localization capabilities as a by-product of communication. We consider sparse reconstruction algorithms to obtain high resolution channel estimates that are mapped to position information. In RIS-aided mmWave systems, the complex… ▽ More RIS-aided millimeter wave wireless systems benefit from robustness to blockage and enhanced coverage. In this paper, we study the ability of RIS to also provide enhanced localization capabilities as a by-product of communication. We consider sparse reconstruction algorithms to obtain high resolution channel estimates that are mapped to position information. In RIS-aided mmWave systems, the complexity of sparse recovery becomes a bottleneck, given the large number of elements of the RIS and the large communication arrays. We propose to exploit a multidimensional orthogonal matching pursuit strategy for compressive channel estimation in a RIS-aided millimeter wave system. We show how this algorithm, based on computing the projections on a set of independent dictionaries instead of a single large dictionary, enables high accuracy channel estimation at reduced complexity. We also combine this strategy with a localization approach which does not rely on the absolute time of arrival of the LoS path. Localization results in a realistic 3D indoor scenario show that RIS-aided wireless system can also benefit from a significant improvement in localization accuracy. △ Less

Submitted 24 March, 2022; originally announced March 2022.

Comments: Submitted to IEEE SPAWC 2022

Deep Learning-based Link Configuration for Radar-aided Multiuser mmWave Vehicle-to-Infrastructure Communication

Authors: Andrew Graff, Yun Chen, Nuria González-Prelcic, Takayuki Shimizu

Abstract: Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels are highly dynamic. In this paper, we propose the use of a passive radar array to sense automotive radar transmissions coming from multiple vehicles on the road… ▽ More Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels are highly dynamic. In this paper, we propose the use of a passive radar array to sense automotive radar transmissions coming from multiple vehicles on the road, and a radar processing chain that provides information about a reduced set of candidate beams for the links between the road-infrastructure and each one of the vehicles. This prior information can be later leveraged by the beam training protocol to significantly reduce overhead. The radar processing chain estimates both the timing and chirp rates of the radar signals, isolates the individual signals by filtering out interfering radar chirps, and estimates the spatial covariance of each individual radar transmission. Then, a deep network is used to translate features of these radar spatial covariances into features of the communication spatial covariances, by learning the intricate map** between radar and communication channels, in both line-of-sight and non-line-of-sight settings. The communication rates and outage probabilities of this approach are compared against exhaustive search and pure radar-aided beam training methods (without deep learning-based map**), and evaluated on multi-user channels simulated by ray tracing. Results show that: (i) the proposed processing chain can reliably isolate the spatial covariances for individual radars, and (ii) the radar-to-communications translation strategy based on deep learning provides a significant improvement over pure radar-aided methods in both LOS and NLOS channels. △ Less

Submitted 12 January, 2022; originally announced January 2022.

A Dynamic Codebook Design for Analog Beamforming in MIMO LEO Satellite Communications

Authors: Joan Palacios, Nuria González-Prelcic, Carlos Mosquera, Takayuki Shimizu

Abstract: Beamforming gain is a key ingredient in the performance of LEO satellite communication systems to be integrated into cellular networks. However, beam codebooks previously designed in the context of MIMO communication for terrestrial networks, do not provide the appropriate performance in terms of inter-beam interference and gain stability as the satellite moves. In this paper, we propose a dynamic… ▽ More Beamforming gain is a key ingredient in the performance of LEO satellite communication systems to be integrated into cellular networks. However, beam codebooks previously designed in the context of MIMO communication for terrestrial networks, do not provide the appropriate performance in terms of inter-beam interference and gain stability as the satellite moves. In this paper, we propose a dynamic codebook that provides a stable gain during the period of time that the satellite covers a given cell, while avoiding link retraining and extra calculation as the satellite moves. In addition, the proposed codebook provides a higher signal-to-interference-plus-noise (SINR) ratio than those DFT codebooks commonly used in cellular systems. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Comments: submitted to ICC 2022

Radar Aided mmWave Vehicle-to-InfrastructureLink Configuration Using Deep Learning

Authors: Yun Chen, Andrew Graff, Nuria González-Prelcic, Takayuki Shimizu

Abstract: The high overhead of the beam training process is the main challenge when establishing mmWave communication links, especially for vehicle-to-everything (V2X) scenarios where the channels are highly dynamic. In this paper, we obtain prior information to speed up the beam training process by implementing two deep neural networks (DNNs) that realize radar-to-communication (R2C) channel information tr… ▽ More The high overhead of the beam training process is the main challenge when establishing mmWave communication links, especially for vehicle-to-everything (V2X) scenarios where the channels are highly dynamic. In this paper, we obtain prior information to speed up the beam training process by implementing two deep neural networks (DNNs) that realize radar-to-communication (R2C) channel information translation in a vehicle-to-infrastructure (V2I) system. Specifically, the first DNN is built to extract the information from the radar azimuth power spectrum (APS) to reconstruct the communication APS, while the second DNN exploits the information extracted from the spatial covariance of the radar channel to realize R2C covariance prediction. The achieved data rate and the similarity between the estimated and the true communication APS are used to evaluate the prediction performance. The covariance estimation method generally provides higher similarity, as the APS predictions cannot always capture the mismatch between the radar and communication APS. Compared to the beam training method which exploits directly the radar APS without an attempt to translate it to the communication channel, our proposed deep learning (DL) aided methods remarkably reduce the beam training overhead, resulting in a 13.3% and 21.9% rate increase when using the communication APS prediction and covariance prediction, respectively. △ Less

Submitted 16 November, 2021; originally announced November 2021.

Beamformer Design and Optimization for Full-Duplex Joint Communication and Sensing at mm-Waves

Authors: Carlos Baquero Barneto, Taneli Riihonen, Sahan Damith Liyanaarachchi, Mikko Heino, Nuria González-Prelcic, Mikko Valkama

Abstract: In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimizatio… ▽ More In this article, we study the joint communication and sensing (JCAS) paradigm in the context of millimeter-wave (mm-wave) mobile communication networks. We specifically address the JCAS challenges stemming from the full-duplex operation and from the co-existence of multiple simultaneous beams for communications and sensing purposes. To this end, we first formulate and solve beamforming optimization problems for hybrid beamforming based multiuser multiple-input and multiple-output JCAS systems. The cost function to be maximized is the beamformed power at the sensing direction while constraining the beamformed power at the communications directions, suppressing interuser interference and cancelling full-duplexing related self-interference (SI). We then also propose new transmitter and receiver beamforming solutions for purely analog beamforming based JCAS systems that maximize the beamforming gain at the sensing direction while controlling the beamformed power at the communications direction(s), cancelling the SI as well as eliminating the potential reflection from the communication direction and optimizing the combined radar pattern (CRP). Both closed-form and numerical optimization based formulations are provided. We analyze and evaluate the performance through extensive simulations, and show that substantial gains and benefits in terms of radar transmit gain, CRP, and SI suppression can be achieved with the proposed beamforming methods. △ Less

Submitted 13 September, 2021; originally announced September 2021.

5G MIMO Data for Machine Learning: Application to Beam-Selection using Deep Learning

Authors: Aldebaro Klautau, Pedro Batista, Nuria Gonzalez-Prelcic, Yuyang Wang, Robert W. Heath Jr

Abstract: The increasing complexity of configuring cellular networks suggests that machine learning (ML) can effectively improve 5G technologies. Deep learning has proven successful in ML tasks such as speech processing and computational vision, with a performance that scales with the amount of available data. The lack of large datasets inhibits the flourish of deep learning applications in wireless communi… ▽ More The increasing complexity of configuring cellular networks suggests that machine learning (ML) can effectively improve 5G technologies. Deep learning has proven successful in ML tasks such as speech processing and computational vision, with a performance that scales with the amount of available data. The lack of large datasets inhibits the flourish of deep learning applications in wireless communications. This paper presents a methodology that combines a vehicle traffic simulator with a raytracing simulator, to generate channel realizations representing 5G scenarios with mobility of both transceivers and objects. The paper then describes a specific dataset for investigating beams-election techniques on vehicle-to-infrastructure using millimeter waves. Experiments using deep learning in classification, regression and reinforcement learning problems illustrate the use of datasets generated with the proposed methodology △ Less

Submitted 9 June, 2021; originally announced June 2021.

A hybrid beamforming design for massive MIMO LEO satellite communications

Authors: Joan Palacios, Nuria Gonzalez-Prelcic, Carlos Mosquera, Takayuki Shimizu, Chang-Heng Wang

Abstract: 5G and future cellular networks intend to incorporate low earth orbit (LEO) satellite communication systems (SatCom) to solve the coverage and availability problems that cannot be addressed by satellite-based or ground-based infrastructure alone. This integration of terrestrial and non terrestrial networks poses many technical challenges which need to be identified and addressed. To this aim, we d… ▽ More 5G and future cellular networks intend to incorporate low earth orbit (LEO) satellite communication systems (SatCom) to solve the coverage and availability problems that cannot be addressed by satellite-based or ground-based infrastructure alone. This integration of terrestrial and non terrestrial networks poses many technical challenges which need to be identified and addressed. To this aim, we design and simulate the downlink of a LEO SatCom compatible with 5G NR, with a special focus on the design of the beamforming codebook at the satellite side. The performance of this approach is evaluated for the link between a LEO satellite and a mobile terminal in the Ku band, assuming a realistic channel model and commercial antenna array designs, both at the satellite and the terminal. Simulation results provide insights on open research challenges related to analog codebook design and hybrid beamforming strategies, requirements of the antenna terminals to provide a given SNR, or required beam reconfiguration capabilities among others. △ Less

Submitted 22 April, 2021; originally announced April 2021.

Journal ref: Front. Space Technol. 2:696464 (2021)

Deep Learning-based Compressive Beam Alignment in mmWave Vehicular Systems

Authors: Yuyang Wang, Nitin Jonathan Myers, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this… ▽ More Millimeter wave vehicular channels exhibit structure that can be exploited for beam alignment with fewer channel measurements compared to exhaustive beam search. With fixed layouts of roadside buildings and regular vehicular moving trajectory, the dominant path directions of channels will likely be among a subset of beam directions instead of distributing randomly over the whole beamspace. In this paper, we propose a deep learning-based technique to design a structured compressed sensing (CS) matrix that is well suited to the underlying channel distribution for mmWave vehicular beam alignment. The proposed approach leverages both sparsity and the particular spatial structure that appears in vehicular channels. We model the compressive channel acquisition by a two-dimensional (2D) convolutional layer followed by dropout. We design fully-connected layers to optimize channel acquisition and beam alignment. We incorporate the low-resolution phase shifter constraint during neural network training by using projected gradient descent for weight updates. Furthermore, we exploit channel spectral structure to optimize the power allocated for different subcarriers. Simulations indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques which use random phase shift-based design. Numerical experiments also show that one single subcarrier is sufficient to provide necessary information for beam alignment. △ Less

Submitted 26 February, 2021; originally announced March 2021.

Comments: Submitted to the IEEE Transactions on Wireless Communications. Copyright may be transferred without notice, after which this version may no longer be accessible

Bayesian Predictive Beamforming for Vehicular Networks: A Low-overhead Joint Radar-Communication Approach

Authors: Weijie Yuan, Fan Liu, Christos Masouros, **hong Yuan, Derrick Wing Kwan Ng, Nuria Gonzalez-Prelcic

Abstract: The development of dual-functional radar-communication (DFRC) systems, where vehicle localization and tracking can be combined with vehicular communication, will lead to more efficient future vehicular networks. In this paper, we develop a predictive beamforming scheme in the context of DFRC systems. We consider a system model where the road-side units estimates and predicts the motion parameters… ▽ More The development of dual-functional radar-communication (DFRC) systems, where vehicle localization and tracking can be combined with vehicular communication, will lead to more efficient future vehicular networks. In this paper, we develop a predictive beamforming scheme in the context of DFRC systems. We consider a system model where the road-side units estimates and predicts the motion parameters of vehicles based on the echoes of the DFRC signal. Compared to the conventional feedback-based beam tracking approaches, the proposed method can reduce the signaling overhead and improve the accuracy. To accurately estimate the motion parameters of vehicles in real-time, we propose a novel message passing algorithm based on factor graph, which yields near optimal solution to the maximum a posteriori estimation. The beamformers are then designed based on the predicted angles for establishing the communication links.}With the employment of appropriate approximations, all messages on the factor graph can be derived in a closed-form, thus reduce the complexity. Simulation results show that the proposed DFRC based beamforming scheme is superior to the feedback-based approach in terms of both estimation and communication performance. Moreover, the proposed message passing algorithm achieves a similar performance of the high-complexity particle-based methods. △ Less

Submitted 14 May, 2020; originally announced May 2020.

Comments: arXiv admin note: substantial text overlap with arXiv:2004.12300

Site-specific online compressive beam codebook learning in mmWave vehicular communication

Authors: Yuyang Wang, Nitin Jonathan Myers, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave (mmWave) communication is one viable solution to support Gbps sensor data sharing in vehicular networks. The use of large antenna arrays at mmWave and high mobility in vehicular communication make it challenging to design fast beam alignment solutions. In this paper, we propose a novel framework that learns the channel angle-of-departure (AoD) statistics at a base station (BS) and… ▽ More Millimeter wave (mmWave) communication is one viable solution to support Gbps sensor data sharing in vehicular networks. The use of large antenna arrays at mmWave and high mobility in vehicular communication make it challenging to design fast beam alignment solutions. In this paper, we propose a novel framework that learns the channel angle-of-departure (AoD) statistics at a base station (BS) and uses this information to efficiently acquire channel measurements. Our framework integrates online learning for compressive sensing (CS) codebook learning and the optimized codebook is used for CS-based beam alignment. We formulate a CS matrix optimization problem based on the AoD statistics available at the BS. Furthermore, based on the CS channel measurements, we develop techniques to update and learn such channel AoD statistics at the BS. We use the upper confidence bound (UCB) algorithm to learn the AoD statistics and the CS matrix. Numerical results show that the CS matrix in the proposed framework provides faster beam alignment than standard CS matrix designs. Simulation results indicate that the proposed beam training technique can reduce overhead by 80% compared to exhaustive beam search, and 70% compared to standard CS solutions that do not exploit any AoD statistics. △ Less

Submitted 11 May, 2020; originally announced May 2020.

Comments: 30 pages, 10 figures

Leveraging Sensing at the Infrastructure for mmWave Communication

Authors: Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr., Amitava Ghosh

Abstract: Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will b… ▽ More Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication. △ Less

Submitted 21 November, 2019; originally announced November 2019.

Deep learning-based beam alignment in mmWave vehicular networks

Authors: Nitin Jonathan Myers, Yuyang Wang, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave channels exhibit structure that allows beam alignment with fewer channel measurements than exhaustive beam search. From a compressed sensing (CS) perspective, the received channel measurements are usually obtained by multiplying a CS matrix with a sparse representation of the channel matrix. Due to the constraints imposed by analog processing, designing CS matrices that efficiently… ▽ More Millimeter wave channels exhibit structure that allows beam alignment with fewer channel measurements than exhaustive beam search. From a compressed sensing (CS) perspective, the received channel measurements are usually obtained by multiplying a CS matrix with a sparse representation of the channel matrix. Due to the constraints imposed by analog processing, designing CS matrices that efficiently exploit the channel structure is, however, challenging. In this paper, we propose an end-to-end deep learning technique to design a structured CS matrix that is well suited to the underlying channel distribution, leveraging both sparsity and the particular spatial structure that appears in vehicular channels. The channel measurements acquired with the designed CS matrix are then used to predict the best beam for link configuration. Simulation results for vehicular communication channels indicate that our deep learning-based approach achieves better beam alignment than standard CS techniques that use the random phase shift-based design. △ Less

Submitted 12 November, 2019; v1 submitted 24 October, 2019; originally announced October 2019.

Comments: submitted to IEEE ICASSP 2020

Passive Radar at the Roadside Unit to Configure Millimeter Wave Vehicle-to-Infrastructure Links

Authors: Anum Ali, Nuria González-Prelcic, Amitava Ghosh

Abstract: Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. T… ▽ More Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted waveform as a reference. To leverage the radar information for beamforming, the radar azimuth power spectrum (APS) and the communication APS should be similar. We outline a radar covariance correction strategy to increase the similarity between the radar and communication APS. We also propose a metric to compare the similarity of the radar and communication APS that has a connection with the achievable rate. We present simulation results based on ray-tracing data. The results show that: (i) covariance correction improves the similarity of radar and communication APS, and (ii) the radar-assisted strategy significantly reduces the training overhead, being particularly useful in non-line-of-sight scenarios. △ Less

Submitted 23 October, 2019; originally announced October 2019.

Dictionary Learning for Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems

Authors: Hongxiang Xie, Javier Rodríguez-Fernández, Nuria González-Prelcic

Abstract: Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutua… ▽ More Exploiting channel sparsity at millimeter wave (mmWave) frequencies reduces the high training overhead associated with the channel estimation stage. Compressive sensing (CS) channel estimation techniques usually adopt the (overcomplete) wavelet/Fourier transform matrix as a sparsifying dictionary. This may not be the best choice when considering non-uniform arrays, antenna gain/phase errors, mutual coupling effects, etc. We propose two dictionary learning (DL) algorithms to learn the best sparsifying dictionaries for channel matrices from observations obtained with hybrid frequency-selective mmWave multiple-input-multiple-output (MIMO) systems. First, we optimize the combined dictionary, i.e., the Kronecker product of transmit and receive dictionaries, as it is used in practice to sparsify the channel matrix. Second, considering the different array structures at the transmitter and receiver, we exploit separable DL to find the best transmit and receive dictionaries. Once the channel is expressed in terms of the optimized dictionaries, various CS-based sparse recovery techniques can be applied for low overhead channel estimation. The proposed DL algorithms perform well under low SNR conditions inherent to any mmWave communication systems before the precoders/combiners can be optimized. The effectiveness of the proposed DL algorithms has been corroborated via numerical simulations with different system configurations, array geometries and hardware impairments. △ Less

Submitted 19 September, 2019; originally announced September 2019.

Comments: 30 pages, 8 figures, journal

LIDAR Data for Deep Learning-Based mmWave Beam-Selection

Authors: Aldebaro Klautau, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Millimeter wave communication systems can leverage information from sensors to reduce the overhead associated with link configuration. LIDAR (light detection and ranging) is one sensor widely used in autonomous driving for high resolution map** and positioning. This paper shows how LIDAR data can be used for line-of-sight detection and to reduce the overhead in millimeter wave beam-selection. In… ▽ More Millimeter wave communication systems can leverage information from sensors to reduce the overhead associated with link configuration. LIDAR (light detection and ranging) is one sensor widely used in autonomous driving for high resolution map** and positioning. This paper shows how LIDAR data can be used for line-of-sight detection and to reduce the overhead in millimeter wave beam-selection. In the proposed distributed architecture, the base station broadcasts its position. The connected vehicle leverages its LIDAR data to suggest a set of beams selected via a deep convolutional neural network. Co-simulation of communications and LIDAR in a vehicle-to-infrastructure (V2I) scenario confirm that LIDAR can help configuring mmWave V2I links. △ Less

Submitted 13 January, 2020; v1 submitted 20 August, 2019; originally announced August 2019.

Comments: 10 pages, IEEE; update: fixed typo

Joint Synchronization, Phase Noise and Compressive Channel Estimation in Hybrid Frequency-Selective mmWave MIMO Systems

Authors: Javier Rodriguez-Fernandez, Nuria Gonzalez-Prelcic

Abstract: The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume perfect time-frequency synchronization and neglect phase noise, making these approaches impractical. Consequently, achieving time-frequency synchronization between tr… ▽ More The large beamforming gain used to operate at millimeter wave (mmWave) frequencies requires obtaining channel information to configure hybrid antenna arrays. Previously proposed wideband channel estimation strategies, however, assume perfect time-frequency synchronization and neglect phase noise, making these approaches impractical. Consequently, achieving time-frequency synchronization between transmitter and receiver and correcting for phase noise (PN) as the channel is estimated, is the greatest challenge yet to be solved in order to configure hybrid precoders and combiners in practical settings. In this paper, building upon our prior work, we find the Maximum A Posteriori (MAP) solution to the joint problem of timing offset (TO), carrier frequency offset (CFO), PN and compressive channel estimation for broadband mmWave MIMO systems with hybrid architectures. Simulation results show that, using significantly less training symbols than in the beam training protocol in the 5G New Radio communications standard, joint synchronization and channel estimation at the low SNR regime can be achieved, and near-optimum data rates can be attained. △ Less

Submitted 5 June, 2019; originally announced June 2019.

Channel Tracking and Hybrid Precoding for Wideband Hybrid Millimeter Wave MIMO Systems

Authors: Javier Rodriguez-Fernandez, Nuria Gonzalez-Prelcic, Takayuki Shimizu

Abstract: A major source of difficulty when operating with large arrays at mmWave frequencies is to estimate the wideband channel, since the use of hybrid architectures acts as a compression stage for the received signal. Moreover, the channel has to be tracked and the antenna arrays regularly reconfigured to obtain appropriate beamforming gains when a mobile setting is considered. In this paper, we focus o… ▽ More A major source of difficulty when operating with large arrays at mmWave frequencies is to estimate the wideband channel, since the use of hybrid architectures acts as a compression stage for the received signal. Moreover, the channel has to be tracked and the antenna arrays regularly reconfigured to obtain appropriate beamforming gains when a mobile setting is considered. In this paper, we focus on the problem of channel tracking for frequency-selective mmWave channels, and propose two novel channel tracking algorithms that leverage prior statistical information on the angles-of-arrival and angles-of-departure. Exploiting this prior information, we also propose a precoding and combining design method to increase the received SNR during channel tracking, such that near-optimum data rates can be obtained with low-overhead. In our numerical results, we analyze the performance of our proposed algorithms for different system parameters. Simulation results show that, using channel realizations extracted from the 5G New Radio channel model, our proposed channel tracking framework is able to achieve near-optimum data rates. △ Less

Submitted 9 May, 2019; originally announced May 2019.

Spatial Channel Covariance Estimation for Hybrid Architectures Based on Tensor Decompositions

Authors: Sungwoo Park, Anum Ali, Nuria González-Prelcic, Robert W. Heath Jr

Abstract: Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance… ▽ More Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance estimation method based on higher-order tensor decomposition for spatially sparse time-varying frequency-selective channels. The proposed method leverages the fact that the channel can be represented as a low-rank higher-order tensor. We also derive the Cramér-Rao lower bound on the estimation accuracy of the proposed method. Numerical results and theoretical analysis show that the proposed tensor-based approach achieves higher estimation accuracy in comparison with prior compressive-sensing-based approaches or conventional angle-of-arrival estimation approaches. Simulation results reveal that the proposed approach becomes more beneficial at low signal-to-noise (SNR) region. △ Less

Submitted 17 February, 2019; originally announced February 2019.

Hybrid precoding and combining for frequency-selective mmWave MIMO Systems with per-antenna power constraints

Authors: Javier Rodriguez-Fernandez, Roberto Lopez-Valcarce, Nuria Gonzalez-Prelcic

Abstract: Configuring hybrid precoders and combiners is a major challenge to deploy practical mmWave communication systems. Prior work addresses the problem of designing hybrid precoders and combiner, yet focusing on finding solutions under a total transmit power constraint. The design of hybrid precoders and combiners in practical system, is constrained, however, by a per antenna transmit power, since each… ▽ More Configuring hybrid precoders and combiners is a major challenge to deploy practical mmWave communication systems. Prior work addresses the problem of designing hybrid precoders and combiner, yet focusing on finding solutions under a total transmit power constraint. The design of hybrid precoders and combiners in practical system, is constrained, however, by a per antenna transmit power, since each antenna element in the array is connected to a power amplifier (PA) that has to operate within its linear region. In this paper, we focus on the problem of hybrid precoding and combining with per-antenna power constraints, and under a frequency-selective bandlimited channel model. We first propose an all-digital solution to this problem, and develop a hybrid precoding and combining strategy that aims at matching this solution by minimizing the chordal distance between the all-digital precoders (combiners) and their hybrid approximations. Finally, since minimizing this metric does not guarantee that the final spectral efficiency will be maximized, we optimize the resulting spectral efficiency taking into account the per-antenna power constraints. Simulation results show the effectiveness of our all-digital and hybrid solutions, while emphasizing the differences with respect to the corresponding solution under a total power constraints. As shown in our numerical results, the proposed all-digital solution performs similarly to the case in which a total power constraint is considered. Further, our proposed hybrid solution is also shown to exhibit near-optimum performance, and the influence of different system parameters is also shown, thereby showing the suitability of our proposed framework to deploy practical mmWave MIMO systems. △ Less

Submitted 1 February, 2019; v1 submitted 6 December, 2018; originally announced December 2018.

Algorithms for the Construction of Incoherent Frames Under Various Design Constraints

Authors: Cristian Rusu, Nuria Gonzalez-Prelcic, Robert W. Heath Jr

Abstract: Unit norm finite frames are generalizations of orthonormal bases with many applications in signal processing. An important property of a frame is its coherence, a measure of how close any two vectors of the frame are to each other. Low coherence frames are useful in compressed sensing applications. When used as measurement matrices, they successfully recover highly sparse solutions to linear inver… ▽ More Unit norm finite frames are generalizations of orthonormal bases with many applications in signal processing. An important property of a frame is its coherence, a measure of how close any two vectors of the frame are to each other. Low coherence frames are useful in compressed sensing applications. When used as measurement matrices, they successfully recover highly sparse solutions to linear inverse problems. This paper describes algorithms for the design of various low coherence frame types: real, complex, unital (constant magnitude) complex, sparse real and complex, nonnegative real and complex, and harmonic (selection of rows from Fourier matrices). The proposed methods are based on solving a sequence of convex optimization problems that update each vector of the frame. This update reduces the coherence with the other frame vectors, while other constraints on its entries are also imposed. Numerical experiments show the effectiveness of the methods compared to the Welch bound, as well as other competing algorithms, in compressed sensing applications. △ Less

Submitted 20 June, 2018; v1 submitted 29 January, 2018; originally announced January 2018.