-
A Combined Model for Noise Reduction of Lung Sound Signals Based on Empirical Mode Decomposition and Artificial Neural Network
Authors:
Mozhde Firoozi Pouyani,
Mansour Vali,
Mohammad Amin Ghasemi
Abstract:
Computer analysis of Lung Sound (LS) signals has been proposed in recent years as a tool to analyze the lungs' status but there have always been main challenges, including the contamination of LS with environmental noises, which come from different sources of unlike intensities. One of the common methods in noise reduction of LS signals is based on thresholding on Discrete Wavelet Transform (DWT)…
▽ More
Computer analysis of Lung Sound (LS) signals has been proposed in recent years as a tool to analyze the lungs' status but there have always been main challenges, including the contamination of LS with environmental noises, which come from different sources of unlike intensities. One of the common methods in noise reduction of LS signals is based on thresholding on Discrete Wavelet Transform (DWT) coefficients or Empirical Mode Decomposition (EMD) of the signal, however, in these methods, it is necessary to calculate the SNR value to determine the appropriate threshold for noise removal. To solve this problem, a combined model based on EMD and Artificial Neural Network (ANN) trained with different SNRs (0, 5, 10, 15, and 20dB) is proposed in this research. The model can denoise white and pink noises in the range of -2 to 20dB without thresholding or even estimating SNR, and at the same time, keep the main content of the LS signal well. The proposed method is also compared with the EMD-custom method, and the results obtained from the SNR, and fit criteria indicate the absolute superiority of the proposed method. For example, at SNR = 0dB, the combined method can improve the SNR by 9.41 and 8.23dB for white and pink noises, respectively, while the corresponding values are respectively 5.89 and 4.31dB for the EMD-Custom method.
△ Less
Submitted 20 September, 2022;
originally announced September 2022.
-
A New Method for Features Normalization in Motor Imagery Few-Shot Learning using Resting-State
Authors:
M. Amin. Ghasemi,
Sadjaad Ozgoli,
Ali. M. NasrAbadi
Abstract:
Brain-computer interface (BCI) systems are usually designed specifically for each subject based on motor imagery. Therefore, the usability of these networks has become a significant challenge. The network has to be designed separately for each user, which is time-consuming for the user. Therefore, this study proposes a method by which the calibration time is significantly reduced while the classif…
▽ More
Brain-computer interface (BCI) systems are usually designed specifically for each subject based on motor imagery. Therefore, the usability of these networks has become a significant challenge. The network has to be designed separately for each user, which is time-consuming for the user. Therefore, this study proposes a method by which the calibration time is significantly reduced while the classification accuracy is increased. In this method, we calibrated the features extracted from the motor imagery task by dividing the features extracted from the resting-state into both open-eye and closed-eye modes and the state in which the subject moves his eyes. The best classification accuracy was obtained using the SVM classifier using the resting-state signal in the open eye, which increased by 3.64% to 74.04%. In this paper, we also investigated the effect of recording time of the resting-state signal and the impact of eye state on the classification accuracy.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
Partial Shading Detection and Smooth Maximum Power Point Tracking of PV Arrays under PSC
Authors:
Mohammad Amin Ghasemi,
Hossein Mohammadian Foroushani,
Mostafa Parniani
Abstract:
One of the most important issues in the operation of a photovoltaic (PV) system is extracting maximum power from the PV array, especially in partial shading condition (PSC). Under PSC, P-V characteristic of PV arrays will have multiple peak points, only one of which is global maximum. Conventional maximum power point tracking (MPPT) methods are not able to extract maximum power in this condition.…
▽ More
One of the most important issues in the operation of a photovoltaic (PV) system is extracting maximum power from the PV array, especially in partial shading condition (PSC). Under PSC, P-V characteristic of PV arrays will have multiple peak points, only one of which is global maximum. Conventional maximum power point tracking (MPPT) methods are not able to extract maximum power in this condition. In this paper, a novel two-stage MPPT method is presented to overcome this drawback. In the first stage, a method is proposed to determine the occurrence of PSC, and in the second stage, using a new algorithm that is based on ramp change of the duty cycle and continuous sampling from the P-V characteristic of the array, global maximum power point of array is reached. P&O algorithm is then re-activated to trace small changes of the new MPP. Open loop operation of the proposed method makes its implementation cheap and simple. The method is robust in the face of changing environmental conditions and array characteristics, and has minimum negative impact on the connected power system. Simulations in Matlab/Simulink and experimental results validate the performance of the proposed methods.
△ Less
Submitted 29 October, 2018;
originally announced October 2018.
-
Fast Maximum Power Point Tracking for PV Arrays under Partial shaded Conditions
Authors:
M. Amin Ghasemi,
Mostafa Parniani,
S. Fariborz Zarei,
Hossein Mohammadian Foroushani
Abstract:
P-V characteristic of photovoltaic (PV) arrays under partially shaded conditions (PSC) has multiple peaks, and conventional maximum power point tracking (MPPT) algorithms may fail to track the global maximum power point (GMPP) because of their insufficient intelligence in discriminating the local and global peaks. This paper proposes a novel fast MPPT method to achieve GMPP of PV array under all P…
▽ More
P-V characteristic of photovoltaic (PV) arrays under partially shaded conditions (PSC) has multiple peaks, and conventional maximum power point tracking (MPPT) algorithms may fail to track the global maximum power point (GMPP) because of their insufficient intelligence in discriminating the local and global peaks. This paper proposes a novel fast MPPT method to achieve GMPP of PV array under all PSCs. The proposed method reduces the number of required samples and increases the speed of GMPP tracking based on comprehensive study of I-V and P-V characteristics of PV array. Performance of the proposed method has been evaluated in simulations of different PSCs. Also, its performance has been compared with two selected methods in the literature through simulations. Comparisons highlight the superiority of the proposed method.
△ Less
Submitted 16 September, 2018;
originally announced September 2018.