Showing 1–20 of 20 results for author: Ge, N

Edge Information Hub-Empowered 6G NTN: Latency-Oriented Resource Orchestration and Configuration

Authors: Yueshan Lin, Wei Feng, Yunfei Chen, Ning Ge, Zhiyong Feng, Yue Gao

Abstract: Quick response to disasters is crucial for saving lives and reducing loss. This requires low-latency uploading of situation information to the remote command center. Since terrestrial infrastructures are often damaged in disaster areas, non-terrestrial networks (NTNs) are preferable to provide network coverage, and mobile edge computing (MEC) could be integrated to improve the latency performance.… ▽ More Quick response to disasters is crucial for saving lives and reducing loss. This requires low-latency uploading of situation information to the remote command center. Since terrestrial infrastructures are often damaged in disaster areas, non-terrestrial networks (NTNs) are preferable to provide network coverage, and mobile edge computing (MEC) could be integrated to improve the latency performance. Nevertheless, the communications and computing in MEC-enabled NTNs are strongly coupled, which complicates the system design. In this paper, an edge information hub (EIH) that incorporates communication, computing and storage capabilities is proposed to synergize communication and computing and enable systematic design. We first address the joint data scheduling and resource orchestration problem to minimize the latency for uploading sensing data. The problem is solved using an optimal resource orchestration algorithm. On that basis, we propose the principles for resource configuration of the EIH considering payload constraints on size, weight and energy supply. Simulation results demonstrate the superiority of our proposed scheme in reducing the overall upload latency, thus enabling quick emergency rescue. △ Less

Submitted 21 May, 2024; originally announced May 2024.

Edge Information Hub: Orchestrating Satellites, UAVs, MEC, Sensing and Communications for 6G Closed-Loop Controls

Authors: Chengleyang Lei, Wei Feng, Peng Wei, Yunfei Chen, Ning Ge, Shiwen Mao

Abstract: An increasing number of field robots would be used for mission-critical tasks in remote or post-disaster areas. Due to usually-limited individual abilities, these robots require an edge information hub (EIH), which is capable of not only communications but also sensing and computing. Such EIH could be deployed on a flexibly-dispatched unmanned aerial vehicle (UAV). Different from traditional aeria… ▽ More An increasing number of field robots would be used for mission-critical tasks in remote or post-disaster areas. Due to usually-limited individual abilities, these robots require an edge information hub (EIH), which is capable of not only communications but also sensing and computing. Such EIH could be deployed on a flexibly-dispatched unmanned aerial vehicle (UAV). Different from traditional aerial base stations or mobile edge computing (MEC), the EIH would direct the operations of robots via sensing-communication-computing-control ($\textbf{SC}^3$) closed-loop orchestration. This paper aims to optimize the closed-loop control performance of multiple $\textbf{SC}^3$ loops, under the constraints of satellite-backhaul rate, computing capability, and on-board energy. Specifically, the linear quadratic regulator (LQR) control cost is used to measure the closed-loop utility, and a sum LQR cost minimization problem is formulated to jointly optimize the splitting of sensor data and allocation of communication and computing resources. We first derive the optimal splitting ratio of sensor data, and then recast the problem to a more tractable form. An iterative algorithm is finally proposed to provide a sub-optimal solution. Simulation results demonstrate the superiority of the proposed algorithm. We also uncover the influence of $\textbf{SC}^3$ parameters on closed-loop controls, highlighting more systematic understanding. △ Less

Submitted 11 March, 2024; originally announced March 2024.

Comments: 13pages, 9 figures

Radio Map-Based Spectrum Sharing for Joint Communication and Sensing

Authors: Xionran Fang, Wei Feng, Yunfei Chen, Dingxi Yang, Ning Ge, Zhiyong Feng, Yue Gao

Abstract: The sixth-generation (6G) network is expected to provide both communication and sensing (C&S) services. However, spectrum scarcity poses a major challenge to the harmonious coexistence of C&S systems. Without effective cooperation, the interference resulting from spectrum sharing impairs the performance of both systems. This paper addresses C&S interference within a distributed network. Different… ▽ More The sixth-generation (6G) network is expected to provide both communication and sensing (C&S) services. However, spectrum scarcity poses a major challenge to the harmonious coexistence of C&S systems. Without effective cooperation, the interference resulting from spectrum sharing impairs the performance of both systems. This paper addresses C&S interference within a distributed network. Different from traditional schemes that require pilot-based high-frequency interactions between C&S systems, we introduce a third party named the radio map to provide the large-scale channel state information (CSI). With large-scale CSI, we optimize the transmit power of C&S systems to maximize the signal-to-interference-plus-noise ratio (SINR) for the radar detection, while meeting the ergodic rate requirement of the interfered user. Given the non-convexity of both the objective and constraint, we employ the techniques of auxiliary-function-based scaling and fractional programming for simplification. Subsequently, we propose an iterative algorithm to solve this problem. Simulation results corroborate our idea that the extrinsic information, i.e., positions and surroundings, is effective to decouple C&S interference. △ Less

Submitted 27 June, 2024; v1 submitted 4 January, 2024; originally announced January 2024.

Satellite-MEC Integration for 6G Internet of Things: Minimal Structures, Advances, and Prospects

Authors: Yueshan Lin, Wei Feng, Yanmin Wang, Yunfei Chen, Yongxu Zhu, Ximu Zhang, Ning Ge

Abstract: The sixth-generation (6G) network is envisioned to shift its focus from the service requirements of human beings' to those of Internet-of-Things (IoT) devices'. Satellite communications are indispensable in 6G to support IoT devices operating in rural or disastrous areas. However, satellite networks face the inherent challenges of low data rate and large latency, which may not support computation-… ▽ More The sixth-generation (6G) network is envisioned to shift its focus from the service requirements of human beings' to those of Internet-of-Things (IoT) devices'. Satellite communications are indispensable in 6G to support IoT devices operating in rural or disastrous areas. However, satellite networks face the inherent challenges of low data rate and large latency, which may not support computation-intensive and delay-sensitive IoT applications. Mobile Edge Computing (MEC) is a burgeoning paradigm by extending cloud computing capabilities to the network edge. By utilizing MEC technologies, the resource-limited IoT devices can access abundant computation resources with low latency, which enables the highly demanding applications while meeting strict delay requirements. Therefore, an integration of satellite communications and MEC technologies is necessary to better enable 6G IoT. In this survey, we provide a holistic overview of satellite-MEC integration. We first discuss the main challenges of the integrated satellite-MEC network and propose three minimal integrating structures. For each minimal structure, we summarize the current advances in terms of their research topics, after which we discuss the lessons learned and future directions of the minimal structure. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated satellite-MEC network. △ Less

Submitted 28 August, 2023; originally announced August 2023.

Control-Oriented Deep Space Communications For Unmanned Space Exploration

Authors: Xinran Fang, Wei Feng, Yunfei Chen, Ning Ge, Gan Zheng

Abstract: In unmanned space exploration, the cooperation among space robots requires advanced communication techniques. In this paper, we propose a communication optimization scheme for a specific cooperation system named the "mother-daughter system". In this setup, the mother spacecraft orbits the planet, while daughter probes are distributed across the planetary surface. During each control cycle, the mot… ▽ More In unmanned space exploration, the cooperation among space robots requires advanced communication techniques. In this paper, we propose a communication optimization scheme for a specific cooperation system named the "mother-daughter system". In this setup, the mother spacecraft orbits the planet, while daughter probes are distributed across the planetary surface. During each control cycle, the mother spacecraft senses the environment, computes control commands and distributes them to daughter probes for actions. They synergistically form sensing-communication-computing-control ($\mathbf{SC^3}$) loops. Given the indivisibility of the $\mathbf{SC^3}$ loop, we optimize the mother-daughter downlink for closed-loop control. The optimization objective is the linear quadratic regulator (LQR) cost, and the optimization parameters are the block length and transmit power. To solve the nonlinear mixed-integer problem, we first identify the optimal block length and then transform the power allocation problem into a tractable convex problem. We further derive the approximate closed-form solutions for the proposed scheme and two communication-oriented schemes: the max-sum rate scheme and the max-min rate scheme. On this basis, we analyze their power allocation principles. In particular, for time-insensitive control tasks, we find that the proposed scheme demonstrates equivalence to the max-min rate scheme. These findings are verified through simulations. △ Less

Submitted 27 June, 2024; v1 submitted 7 August, 2023; originally announced August 2023.

Control-Oriented Power Allocation for Integrated Satellite-UAV Networks

Authors: Chengleyang Lei, Wei Feng, Jue Wang, Shi **, Ning Ge

Abstract: This letter presents a sensing-communication-computing-control (SC3) integrated satellite unmanned aerial vehicle (UAV) network, where the UAV is equipped with on-board sensors, mobile edge computing (MEC) servers, base stations and satellite communication module. Like the nervous system, this integrated network is capable of organizing multiple field robots in remote areas, so as to perform missi… ▽ More This letter presents a sensing-communication-computing-control (SC3) integrated satellite unmanned aerial vehicle (UAV) network, where the UAV is equipped with on-board sensors, mobile edge computing (MEC) servers, base stations and satellite communication module. Like the nervous system, this integrated network is capable of organizing multiple field robots in remote areas, so as to perform mission-critical tasks which are dangerous for human. Aiming at activating this nervous system with multiple SC3 loops, we present a control-oriented optimization problem. Different from traditional studies which mainly focused on communication metrics, we address the power allocation issue to minimize the sum linear quadratic regulator (LQR) control cost of all SC3 loops. Specifically, we show the convexity of the formulated problem and reveal the relationship between optimal transmit power and intrinsic entropy rate of different SC3 loops. For the assure-to-be-stable case, we derive a closed-form solution for ease of practical applications. After demonstrating the superiority of the control-oriented power allocation, we further highlight its difference with classic capacity-oriented water-filling method. △ Less

Submitted 31 August, 2022; originally announced August 2022.

Comments: 5 pages, 3 figures

Integrating Satellites and Mobile Edge Computing for 6G Wide-Area Edge Intelligence: Minimal Structures and Systematic Thinking

Authors: Yueshan Lin, Wei Feng, Ting Zhou, Yanmin Wang, Yunfei Chen, Ning Ge, Cheng-Xiang Wang

Abstract: The sixth-generation (6G) network will shift its focus to supporting everything including various machine-type devices (MTDs) in an everyone-centric manner. To ubiquitously cover the MTDs working in rural and disastrous areas, satellite communications become indispensable, while mobile edge computing (MEC) also plays an increasingly crucial role. Their sophisticated integration enables wide-area e… ▽ More The sixth-generation (6G) network will shift its focus to supporting everything including various machine-type devices (MTDs) in an everyone-centric manner. To ubiquitously cover the MTDs working in rural and disastrous areas, satellite communications become indispensable, while mobile edge computing (MEC) also plays an increasingly crucial role. Their sophisticated integration enables wide-area edge intelligence which promises to facilitate globally-distributed customized services. In this article, we present typical use cases of integrated satellite-MEC networks and discuss the main challenges therein. Inspired by the protein structure and the systematic engineering methodology, we propose three minimal integrating structures, based on which a complex integrated satellite-MEC network can be treated as their extension and combination. We discuss the unique characteristics and key problems of each minimal structure. Accordingly, we establish an on-demand network orchestration framework to enrich the hierarchy of network management, which further leads to a process-oriented network optimization method. On that basis, a case study is utilized to showcase the benefits of on-demand network orchestration and process-oriented network optimization. Finally, we outline potential research issues to envision a more intelligent, more secure, and greener integrated network. △ Less

Submitted 16 August, 2022; originally announced August 2022.

Joint Communication and Sensing: Models and Potential of Using MIMO

Authors: Xinran Fang, Wei Feng, Yunfei Chen, Ning Ge, Yan Zhang

Abstract: The sixth-generation (6G) network is envisioned to integrate communication and sensing functions, so as to improve the spectrum efficiency (SE) and support explosive novel applications. Although the similarities of wireless communication and radio sensing lay the foundation for their combination, there is still considerable incompatible interest between them. To simultaneously guarantee the commun… ▽ More The sixth-generation (6G) network is envisioned to integrate communication and sensing functions, so as to improve the spectrum efficiency (SE) and support explosive novel applications. Although the similarities of wireless communication and radio sensing lay the foundation for their combination, there is still considerable incompatible interest between them. To simultaneously guarantee the communication capacity and the sensing accuracy, the multiple-input and multiple-output (MIMO) technique plays an important role due to its unique capability of spatial beamforming and waveform sha**. However, the configuration of MIMO also brings high hardware cost, high power consumption, and high signal processing complexity. How to efficiently apply MIMO to achieve balanced communication and sensing performance is still open. In this survey, we discuss joint communication and sensing (JCAS) in the context of MIMO. We first outline the roles of MIMO in the process of wireless communication and radar sensing. Then, we present current advances in both communication and sensing coexistence and integration in detail. Three novel JCAS MIMO models are subsequently discussed by combining cutting-edge technologies, i.e., cloud random access networks (C-RANs), unmanned aerial vehicles (UAVs) and reconfigurable intelligent surfaces (RISs). Examined from the practical perspective, the potential and challenges of MIMO in JCAS are summarized, and promising solutions are provided. Motivated by the great potential of the Internet of Things (IoT), we also specify JCAS in IoT scenarios and discuss the uniqueness of applying JCAS to IoT. In the end, open issues are outlined to envisage a ubiquitous, intelligent and secure JCAS network in the near future. △ Less

Submitted 4 December, 2022; v1 submitted 19 May, 2022; originally announced May 2022.

Near-Field Rainbow: Wideband Beam Training for XL-MIMO

Authors: Mingyao Cui, Linglong Dai, Zhaocheng Wang, Shidong Zhou, Ning Ge

Abstract: Wideband extremely large-scale multiple-input-multiple-output (XL-MIMO) is a promising technique to achieve Tbps data rates in future 6G systems through beamforming and spatial multiplexing. Due to the extensive bandwidth and the huge number of antennas for wideband XL-MIMO, a significant near-field beam split effect will be induced, where beams at different frequencies are focused on different lo… ▽ More Wideband extremely large-scale multiple-input-multiple-output (XL-MIMO) is a promising technique to achieve Tbps data rates in future 6G systems through beamforming and spatial multiplexing. Due to the extensive bandwidth and the huge number of antennas for wideband XL-MIMO, a significant near-field beam split effect will be induced, where beams at different frequencies are focused on different locations. The near-field beam split effect results in a severe array gain loss, so existing works mainly focus on compensating for this loss by utilizing the time delay (TD) beamformer. By contrast, this paper demonstrates that although the near-field beam split effect degrades the array gain, it also provides a new possibility to realize fast near-field beam training. Specifically, we first reveal the mechanism of the near-field controllable beam split effect. This effect indicates that, by dedicatedly designing the delay parameters, a TD beamformer is able to control the degree of the near-field beam split effect, i.e., beams at different frequencies can flexibly occupy the desired location range. Due to the similarity with the dispersion of natural light caused by a prism, this effect is also termed as the near-field rainbow in this paper. Then, taking advantage of the near-field rainbow effect, a fast wideband beam training scheme is proposed. In our scheme, the close form of the beamforming vector is elaborately derived to enable beams at different frequencies to be focused on different desired locations. By this means, the optimal beamforming vector with the largest array gain can be rapidly searched out by generating multiple beams focused on multiple locations simultaneously through only one radio-frequency (RF) chain. Finally, simulation results demonstrate the proposed scheme is able to realize near-optimal nearfield beam training with a very low training overhead. △ Less

Submitted 7 May, 2022; originally announced May 2022.

Comments: 29 pages, 10 figures. Simulation codes will be provided to reproduce the results presented in this paper after publication: http://oa.ee.tsinghua.edu.cn/dailinglong/publications/publications.html

Physical Layer Security for UAV Communications in 5G and Beyond Networks

Authors: Jue Wang, Xuanxuan Wang, Ruifeng Gao, Chengleyang Lei, Wei Feng, Ning Ge, Shi **, Tony Q. S. Quek

Abstract: Due to its high mobility and flexible deployment, unmanned aerial vehicle (UAV) is drawing unprecedented interest in both military and civil applications to enable agile wireless communications and provide ubiquitous connectivity. Mainly operating in an open environment, UAV communications can benefit from dominant line-of-sight links; however, it on the other hand renders the UAVs more vulnerable… ▽ More Due to its high mobility and flexible deployment, unmanned aerial vehicle (UAV) is drawing unprecedented interest in both military and civil applications to enable agile wireless communications and provide ubiquitous connectivity. Mainly operating in an open environment, UAV communications can benefit from dominant line-of-sight links; however, it on the other hand renders the UAVs more vulnerable to malicious eavesdrop** or jamming attacks. Recently, physical layer security (PLS), which exploits the inherent randomness of the wireless channels for secure communications, has been introduced to UAV systems as an important complement to the conventional cryptography-based approaches. In this paper, a comprehensive survey on the current achievements of the UAV-aided wireless communications is conducted from the PLS perspective. We first introduce the basic concepts of UAV communications including the typical static/mobile deployment scenarios, the unique characteristics of air-to-ground channels, as well as various roles that a UAV may act when PLS is concerned. Then, we introduce the widely used secrecy performance metrics and start by reviewing the secrecy performance analysis and enhancing techniques for statically deployed UAV systems, and extend the discussion to a more general scenario where the UAVs' mobility is further exploited. For both cases, respectively, we summarize the commonly adopted methodologies in the corresponding analysis and design, then describe important works in the literature in detail. Finally, potential research directions and challenges are discussed to provide an outlook for future works in the area of UAV-PLS in 5G and beyond networks. △ Less

Submitted 24 May, 2021; originally announced May 2021.

MEC-Empowered Non-Terrestrial Network for 6G Wide-Area Time-Sensitive Internet of Things

Authors: Chengxiao Liu, Wei Feng, Xiaoming Tao, Ning Ge

Abstract: In the upcoming sixth-generation (6G) era, the demand for constructing a wide-area time-sensitive Internet of Things (IoT) keeps increasing. As conventional cellular technologies are hard to be directly used for wide-area time-sensitive IoT, it is beneficial to use non-terrestrial infrastructures including satellites and unmanned aerial vehicles (UAVs), where a non-terrestrial network (NTN) can be… ▽ More In the upcoming sixth-generation (6G) era, the demand for constructing a wide-area time-sensitive Internet of Things (IoT) keeps increasing. As conventional cellular technologies are hard to be directly used for wide-area time-sensitive IoT, it is beneficial to use non-terrestrial infrastructures including satellites and unmanned aerial vehicles (UAVs), where a non-terrestrial network (NTN) can be built under the cell-free architecture. Driven by the time-sensitive requirements and uneven distribution of IoT devices, the NTN is required to be empowered by mobile edge computing (MEC) while providing oasis-oriented on-demand coverage for the devices. Nevertheless, communication and MEC systems are coupled with each other under the influence of complex propagation environment in the MEC-empowered NTN, which makes it hard to orchestrate the resources. In this paper, we propose a process-oriented framework to design the communication and MEC systems in a time-division manner. Under this framework, the large-scale channel state information (CSI) is used to characterize the complex propagation environment with an affordable cost, where a non-convex latency minimization problem is formulated. After that, the approximated problem is given and it can be decomposed into subproblems. These subproblems are further solved in an iterative way. Simulation results demonstrate the superiority of the proposed process-oriented scheme over other algorithms. These results also indicate that the payload deployments of UAVs should be appropriately predesigned to improve the efficiency of resource use. Furthermore, the results imply that it is advantageous to integrate NTN with MEC for wide-area time-sensitive IoT. △ Less

Submitted 21 June, 2021; v1 submitted 1 March, 2021; originally announced March 2021.

Comments: 29 pages, 11 figures, one column

Delay Characterization of Mobile Edge Computing for 6G Time-Sensitive Services

Authors: Jianyu Cao, Wei Feng, Ning Ge, Jianhua Lu

Abstract: Time-sensitive services (TSSs) have been widely envisioned for future sixth generation (6G) wireless communication networks. Due to its inherent low-latency advantage, mobile edge computing (MEC) will be an indispensable enabler for TSSs. The random characteristics of the delay experienced by users are key metrics reflecting the quality of service (QoS) of TSSs. Most existing studies on MEC have f… ▽ More Time-sensitive services (TSSs) have been widely envisioned for future sixth generation (6G) wireless communication networks. Due to its inherent low-latency advantage, mobile edge computing (MEC) will be an indispensable enabler for TSSs. The random characteristics of the delay experienced by users are key metrics reflecting the quality of service (QoS) of TSSs. Most existing studies on MEC have focused on the average delay. Only a few research efforts have been devoted to other random delay characteristics, such as the delay bound violation probability and the probability distribution of the delay, by decoupling the transmission and computation processes of MEC. However, if these two processes could not be decoupled, the coupling will bring new challenges to analyzing the random delay characteristics. In this paper, an MEC system with a limited computation buffer at the edge server is considered. In this system, the transmission process and computation process form a feedback loop and could not be decoupled. We formulate a discrete-time two-stage tandem queueing system. Then, by using the matrix-geometric method, we obtain the estimation methods for the random delay characteristics, including the probability distribution of the delay, the delay bound violation probability, the average delay and the delay standard deviation. The estimation methods are verified by simulations. The random delay characteristics are analyzed by numerical experiments, which unveil the coupling relationship between the transmission process and computation process for MEC. These results will largely facilitate elaborate allocation of communication and computation resources to improve the QoS of TSSs. △ Less

Submitted 16 September, 2020; originally announced September 2020.

Comments: 17 pages, 11 figures. This paper has been accepted by IEEE Internet of Things Journal

Cell-Free Satellite-UAV Networks for 6G Wide-Area Internet of Things

Authors: Chengxiao Liu, Wei Feng, Yunfei Chen, Cheng-Xiang Wang, Ning Ge

Abstract: In fifth generation (5G) and beyond Internet of Things (IoT), it becomes increasingly important to serve a massive number of IoT devices outside the coverage of terrestrial cellular networks. Due to their own limitations, unmanned aerial vehicles (UAVs) and satellites need to coordinate with each other in the coverage holes of 5G, leading to a cognitive satellite-UAV network (CSUN). In this paper,… ▽ More In fifth generation (5G) and beyond Internet of Things (IoT), it becomes increasingly important to serve a massive number of IoT devices outside the coverage of terrestrial cellular networks. Due to their own limitations, unmanned aerial vehicles (UAVs) and satellites need to coordinate with each other in the coverage holes of 5G, leading to a cognitive satellite-UAV network (CSUN). In this paper, we investigate multi-domain resource allocation for CSUNs consisting of a satellite and a swarm of UAVs, so as to improve the efficiency of massive access in wide areas. Particularly, the cell-free on-demand coverage is established to overcome the cost-ineffectiveness of conventional cellular architecture. Opportunistic spectrum sharing is also implemented to cope with the spectrum scarcity problem. To this end, a process-oriented optimization framework is proposed for jointly allocating subchannels, transmit power and hovering times, which considers the whole flight process of UAVs and uses only the slowly-varying large-scale channel state information (CSI). Under the on-board energy constraints of UAVs and interference temperature constraints from UAV swarm to satellite users, we present iterative multi-domain resource allocation algorithms to improve network efficiency with guaranteed user fairness. Simulation results demonstrate the superiority of the proposed algorithms. Moreover, the adaptive cell-free coverage pattern is observed, which implies a promising way to efficiently serve wide-area IoT devices in the upcoming sixth generation (6G) era. △ Less

Submitted 23 July, 2020; v1 submitted 22 July, 2020; originally announced July 2020.

Comments: 16 Pages, 9 figures, to be published in IEEE Journal on Selected Areas in Communications

Single-Look Multi-Master SAR Tomography: An Introduction

Authors: Nan Ge, Richard Bamler, Danfeng Hong, Xiao Xiang Zhu

Abstract: This paper addresses the general problem of single-look multi-master SAR tomography. For this purpose, we establish the single-look multi-master data model, analyze its implications for single and double scatterers, and propose a generic inversion framework. The core of this framework is nonconvex sparse recovery, for which we develop two algorithms: one extends the conventional nonlinear least sq… ▽ More This paper addresses the general problem of single-look multi-master SAR tomography. For this purpose, we establish the single-look multi-master data model, analyze its implications for single and double scatterers, and propose a generic inversion framework. The core of this framework is nonconvex sparse recovery, for which we develop two algorithms: one extends the conventional nonlinear least squares (NLS) to the single-look multi-master data model, and the other is based on bi-convex relaxation and alternating minimization (BiCRAM). We provide two theorems for the objective function of the NLS subproblem, which lead to its analytic solution up to a constant phase angle in the one-dimensional case. We also report our findings from the experiments on different acceleration techniques for BiCRAM. The proposed algorithms are applied to a real TerraSAR-X data set, and validated with height ground truth made available via a SAR imaging geodesy and simulation framework. This shows empirically that the \emph{single-master} approach, if applied to a single-look \emph{multi-master} stack, can be insufficient for layover separation, and the \emph{multi-master} approach can indeed perform slightly better (despite being computationally more expensive) even in the case of single scatterers. Besides, this paper also sheds light on the special case of single-look bistatic SAR tomography, which is relevant for current and future SAR missions such as TanDEM-X and Tandem-L. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Enabling 5G on the Ocean: A Hybrid Satellite-UAV-Terrestrial Network Solution

Authors: Xiangling Li, Wei Feng, Jue Wang, Yunfei Chen, Ning Ge, Cheng-Xiang Wang

Abstract: Current fifth generation (5G) cellular networks mainly focus on the terrestrial scenario. Due to the difficulty of deploying communications infrastructure on the ocean, the performance of existing maritime communication networks (MCNs) is far behind 5G. This problem can be solved by using unmanned aerial vehicles (UAVs) as agile aerial platforms to enable on-demand maritime coverage, as a suppleme… ▽ More Current fifth generation (5G) cellular networks mainly focus on the terrestrial scenario. Due to the difficulty of deploying communications infrastructure on the ocean, the performance of existing maritime communication networks (MCNs) is far behind 5G. This problem can be solved by using unmanned aerial vehicles (UAVs) as agile aerial platforms to enable on-demand maritime coverage, as a supplement to marine satellites and shore-based terrestrial based stations (TBSs). In this paper, we study the integration of UAVs with existing MCNs, and investigate the potential gains of hybrid satellite-UAV-terrestrial networks for maritime coverage. Unlike the terrestrial scenario, vessels on the ocean keep to sea lanes and are sparsely distributed. This provides new opportunities to ease the scheduling of UAVs. Also, new challenges arise due to the more complicated maritime prorogation environment, as well as the mutual interference between UAVs and existing satellites/TBSs. We discuss these issues and show possible solutions considering practical constraints. △ Less

Submitted 1 June, 2020; originally announced June 2020.

Journal ref: IEEE Wireless Communications ( Volume: 27, Issue: 6, December 2020)

RIS-Aided Offshore Communications with Adaptive Beamforming and Service Time Allocation

Authors: Zhengyi Zhou, Ning Ge, Wendong Liu, Zhaocheng Wang

Abstract: Reconfigurable intelligent surfaces (RISs), which can deliberately adjust the phase of incident waves, have shown enormous potentials to reconfigure the signal propagation for performance enhancement. In this paper, we investigate the RIS-aided offshore system to provide a cost-effective coverage of high-speed data service. The shipborne RIS is placed offshore to improve the signal quality at the… ▽ More Reconfigurable intelligent surfaces (RISs), which can deliberately adjust the phase of incident waves, have shown enormous potentials to reconfigure the signal propagation for performance enhancement. In this paper, we investigate the RIS-aided offshore system to provide a cost-effective coverage of high-speed data service. The shipborne RIS is placed offshore to improve the signal quality at the vessels, and the coastal base station is equipped with low-cost reconfigurable reflect-arrays (RRAs), instead of the conventional costly fully digital antenna arrays (FDAAs), to reduce the hardware cost. In order to meet the rate requirements of diversified maritime activities, the effective sum rate (ESR) is studied by jointly optimizing the beamforming scheme and the service time allocated to each vessel. The optimal allocation scheme is derived, and an efficient fixed-point based alternating ascent method is developed to obtain a suboptimal solution to the non-convex beamforming problem. Numerical results show that the ESR is considerably improved with the aid of the RIS, and the proposed scheme using the hardwareefficient RRAs has only a slight performance loss, compared to its FDAA-based counterpart. △ Less

Submitted 8 November, 2019; originally announced November 2019.

Neural Zero-Inflated Quality Estimation Model For Automatic Speech Recognition System

Authors: Kai Fan, Jiayi Wang, Bo Li, Shiliang Zhang, Boxing Chen, Niyu Ge, Zhijie Yan

Abstract: The performances of automatic speech recognition (ASR) systems are usually evaluated by the metric word error rate (WER) when the manually transcribed data are provided, which are, however, expensively available in the real scenario. In addition, the empirical distribution of WER for most ASR systems usually tends to put a significant mass near zero, making it difficult to simulate with a single c… ▽ More The performances of automatic speech recognition (ASR) systems are usually evaluated by the metric word error rate (WER) when the manually transcribed data are provided, which are, however, expensively available in the real scenario. In addition, the empirical distribution of WER for most ASR systems usually tends to put a significant mass near zero, making it difficult to simulate with a single continuous distribution. In order to address the two issues of ASR quality estimation (QE), we propose a novel neural zero-inflated model to predict the WER of the ASR result without transcripts. We design a neural zero-inflated beta regression on top of a bidirectional transformer language model conditional on speech features (speech-BERT). We adopt the pre-training strategy of token level mask language modeling for speech-BERT as well, and further fine-tune with our zero-inflated layer for the mixture of discrete and continuous outputs. The experimental results show that our approach achieves better performance on WER prediction in the metrics of Pearson and MAE, compared with most existed quality estimation algorithms for ASR or machine translation. △ Less

Submitted 28 August, 2020; v1 submitted 2 October, 2019; originally announced October 2019.

Comments: InterSpeech 2020

UAV Swarm-Enabled Aerial CoMP: A Physical Layer Security Perspective

Authors: Xuanxuan Wang, Wei Feng, Yunfei Chen, Ning Ge

Abstract: Unlike aerial base station enabled by a single unmanned aerial vehicle (UAV), aerial coordinated multiple points (CoMP) can be enabled by a UAV swarm. In this case, the management of multiple UAVs is important. This paper considers the power allocation strategy for a UAV swarm-enabled aerial network to enhance the physical layer security of the downlink transmission, where an eavesdropper moves fo… ▽ More Unlike aerial base station enabled by a single unmanned aerial vehicle (UAV), aerial coordinated multiple points (CoMP) can be enabled by a UAV swarm. In this case, the management of multiple UAVs is important. This paper considers the power allocation strategy for a UAV swarm-enabled aerial network to enhance the physical layer security of the downlink transmission, where an eavesdropper moves following the trajectory of the swarm for better eavesdrop**. Unlike existing works, we use only the large-scale channel state information (CSI) and maximize the secrecy throughput in a whole-trajectory-oriented manner. The overall transmission energy constraint on each UAV and the total transmission duration for all the legitimate users are considered. The non-convexity of the formulated problem is solved by using max-min optimization with iteration. Both the transmission power of desired signals and artificial noise (AN) are derived iteratively. Simulation results are presented to validate the effectiveness of our proposed power allocation algorithm and to show the advantage of aerial CoMP by using only the large-scale CSI. △ Less

Submitted 19 August, 2019; v1 submitted 14 May, 2019; originally announced May 2019.

Optimal Beamforming for Hybrid Satellite Terrestrial Networks with Nonlinear PA and Imperfect CSIT

Authors: Chengxiao Liu, Wei Feng, Yunfei Chen, Cheng-Xiang Wang, Ning Ge

Abstract: In hybrid satellite-terrestrial networks (HSTNs), spectrum sharing is crucial to alleviate the "spectrum scarcity" problem. Therein, the transmit beams should be carefully designed to mitigate the inter-satellite-terrestrial interference. Different from previous studies, this work considers the impact of both nonlinear power amplifier (PA) and large-scale channel state information at the transmitt… ▽ More In hybrid satellite-terrestrial networks (HSTNs), spectrum sharing is crucial to alleviate the "spectrum scarcity" problem. Therein, the transmit beams should be carefully designed to mitigate the inter-satellite-terrestrial interference. Different from previous studies, this work considers the impact of both nonlinear power amplifier (PA) and large-scale channel state information at the transmitter (CSIT) on beamforming. These phenomena are usually inevitable in a practical HSTN. Based on the Saleh model of PA nonlinearity and the large-scale multi-beam satellite channel parameters, we formulate a beamforming optimization problem to maximize the achievable rate of the satellite system while ensuring that the inter-satellite-terrestrial interference is below a given threshold. The optimal amplitude and phase of desired beams are derived in a decoupled manner. Simulation results demonstrate the superiority of the proposed beamforming scheme. △ Less

Submitted 4 March, 2020; v1 submitted 5 May, 2019; originally announced May 2019.

Comments: 5 pages, 5 figures, journal

Journal ref: IEEE Wireless Communications Letters, 2019

Spaceborne Staring Spotlight SAR Tomography - A First Demonstration with TerraSAR-X

Authors: Nan Ge, Fernando Rodriguez Gonzalez, Yuanyuan Wang, Yilei Shi, Xiao Xiang Zhu

Abstract: With the objective of exploiting hardware capabilities and preparing the ground for the next-generation X-band synthetic aperture radar (SAR) missions, TerraSAR-X and TanDEM-X are now able to operate in staring spotlight mode, which is characterized by an increased azimuth resolution of approximately 0.24 m compared to 1.1 m of the conventional sliding spotlight mode. In this paper, we demonstrate… ▽ More With the objective of exploiting hardware capabilities and preparing the ground for the next-generation X-band synthetic aperture radar (SAR) missions, TerraSAR-X and TanDEM-X are now able to operate in staring spotlight mode, which is characterized by an increased azimuth resolution of approximately 0.24 m compared to 1.1 m of the conventional sliding spotlight mode. In this paper, we demonstrate for the first time its potential for SAR tomography. To this end, we tailored our interferometric and tomographic processors for the distinctive features of the staring spotlight mode, which will be analyzed accordingly. By means of its higher spatial resolution, the staring spotlight mode will not only lead to a denser point cloud, but also to more accurate height estimates due to the higher signal-to-clutter ratio. As a result of a first comparison between sliding and staring spotlight TomoSAR, the following were observed: 1) the density of the staring spotlight point cloud is approximately 5.1--5.5 times as high; 2) the relative height accuracy of the staring spotlight point cloud is approximately 1.7 times as high. △ Less

Submitted 18 July, 2018; originally announced July 2018.

Comments: Accepted publication in IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing