Showing 1–19 of 19 results for author: Garone, E

Less Conservative Robust Reference Governors and Their Applications

Authors: Miguel Castroviejo-Fernandez, Huayi Li, Andrés Cotorruelo, Emanuele Garone, Ilya Kolmanovsky

Abstract: The applications of reference governors to systems with unmeasured set-bounded disturbances can lead to conservative solutions. This conservatism can be reduced by estimating the disturbance from output measurements and canceling it in the nominal control law. In this paper, a reference governor based on such an approach is considered and time-varying, disturbance and state estimation errors bound… ▽ More The applications of reference governors to systems with unmeasured set-bounded disturbances can lead to conservative solutions. This conservatism can be reduced by estimating the disturbance from output measurements and canceling it in the nominal control law. In this paper, a reference governor based on such an approach is considered and time-varying, disturbance and state estimation errors bounding sets are derived. Consequently, the traditional implementation of a reference governor, which exploits a constraint admissible positively-invariant set of constant commands and initial states, is replaced by one which utilizes a time-dependent sequence of similar sets (which are not necessary nested). Examples are reported which include two applications to longitudinal control of aircraft that illustrate handling of elevator uncertainty and wing icing. △ Less

Submitted 3 January, 2024; originally announced January 2024.

Comments: 20 pages

Modelling and Control of a Knuckle Boom Crane

Authors: M. Ambrosino, E. Garone

Abstract: Cranes come in various sizes and designs to perform different tasks. Depending on their dynamic properties, they can be classified as gantry cranes and rotary cranes. In this paper we will focus on the so called 'knuckle boom' cranes which are among the most common types of rotary cranes. Compared with the other kinds of cranes (e.g. boom cranes, tower cranes, overhead cranes, etc), the study of k… ▽ More Cranes come in various sizes and designs to perform different tasks. Depending on their dynamic properties, they can be classified as gantry cranes and rotary cranes. In this paper we will focus on the so called 'knuckle boom' cranes which are among the most common types of rotary cranes. Compared with the other kinds of cranes (e.g. boom cranes, tower cranes, overhead cranes, etc), the study of knuckle cranes is still at an early stage and very few control strategies for this kind of crane have been proposed in the literature. Although fairly simple mechanically, from the control viewpoint the knuckle cranes present several challenges. A first result of this paper is to present for the first time a complete mathematical model for this kind of crane where it is possible to control the three rotations of the crane (known as luff, slew, and jib movement), and the cable length. The only simplifying assumption of the model is that the cable is considered rigid. On the basis of this model, we propose a nonlinear control law based on energy considerations which is able to perform position control of the crane while actively dam** the oscillations of the load. The corresponding stability and convergence analysis is carefully proved using the LaSalle's invariance principle. The effectiveness of the proposed control approach has been tested in simulation with realistic physical parameters and in the presence of model mismatch. △ Less

Submitted 30 March, 2021; originally announced March 2021.

Comments: This paper has been accepted to International Journal of Control on March 29th 2021. arXiv admin note: text overlap with arXiv:2103.02509

Journal ref: International Journal of Control 2021

Constraint Control of a Boom Crane System

Authors: Michele Ambrosino, Arnaud Dawans, Emanuele Garone

Abstract: Boom cranes are among the most used cranes to lift heavy loads. Although fairly simple mechanically, from the control viewpoint this kind of crane is a nonlinear underactuated system which presents several challenges, especially when con-trolled in the presence of constraints. To solve this problem, we propose an approach based on the Explicit Reference Governor (ERG), which does not require any o… ▽ More Boom cranes are among the most used cranes to lift heavy loads. Although fairly simple mechanically, from the control viewpoint this kind of crane is a nonlinear underactuated system which presents several challenges, especially when con-trolled in the presence of constraints. To solve this problem, we propose an approach based on the Explicit Reference Governor (ERG), which does not require any online optimization, thus making it computationally inexpensive. The proposed control scheme is able to steer the crane to a desired position ensuring the respect of limited joint ranges, maximum oscillation angle, and the avoidance of static obstacles. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Comments: The paper was published in 37th International Symposium on Automation and Robotics in Construction (ISARC 2020)

Journal ref: 2020 Proceedings of the 37th ISARC, Kitakyushu, Japan

Oscillation Reduction for Knuckle Cranes

Authors: Michele Ambrosino, Brent Thierens, Arnaud Dawans, Emanuele Garone

Abstract: Boom cranes are among the most common material handling systems due to their simple design. Some boom cranes also have an auxiliary jib connected to the boom with a flexible joint to enhance the maneuverability and increase the workspace of the crane. Such boom cranes are commonly called knuckle boom cranes. Due to their underactuated properties, it is fairly challenging to control knuckle boom cr… ▽ More Boom cranes are among the most common material handling systems due to their simple design. Some boom cranes also have an auxiliary jib connected to the boom with a flexible joint to enhance the maneuverability and increase the workspace of the crane. Such boom cranes are commonly called knuckle boom cranes. Due to their underactuated properties, it is fairly challenging to control knuckle boom cranes. To the best of our knowledge, only a few techniques are present in the literature to control this type of cranes using approximate models of the crane. In this paper we present for the first time a complete mathematical model for this crane where it is possible to control the three rotations of the crane (known as luff, slew, and jib movement), and the cable length. One of the main challenges to control this system is how to reduce the oscillations in an effective way. In this paper we propose a nonlinear control based on energy considerations capable of guiding the crane to desired sets points while effectively reducing load oscillations. The corresponding stability and convergence analysis is proved using the LaSalle's invariance principle. Simulation results are provided to demonstrate the effectiveness and feasibility of the proposed method. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Comments: This paper was published in 37th International Symposium on Automation and Robotics in Construction (ISARC 2020)

Journal ref: 2020 Proceedings of the 37th ISARC, Kitakyushu, Japan

Modeling and control of 5-DoF boom crane

Authors: Michele Ambrosino, Marc Berneman, Gianluca Carbone, Rémi Crépin, Arnaud Dawans, Emanuele Garone

Abstract: Automation of cranes can have a direct impact on the productivity of construction projects. In this paper, we focus on the control of one of the most used cranes, the boom crane. Tower cranes and overhead cranes have been widely studied in the literature, whereas the control of boom cranes has been investigated only by a few works. Typically, these works make use of simple models making use of a l… ▽ More Automation of cranes can have a direct impact on the productivity of construction projects. In this paper, we focus on the control of one of the most used cranes, the boom crane. Tower cranes and overhead cranes have been widely studied in the literature, whereas the control of boom cranes has been investigated only by a few works. Typically, these works make use of simple models making use of a large number of simplifying assumptions (e.g. fixed length cable, assuming certain dynamics are uncoupled, etc.) A first result of this paper is to present a fairly complete nonlinear dynamic model of a boom crane taking into account all coupling dynamics and where the only simplifying assumption is that the cable is considered as rigid. The boom crane involves pitching and rotational movements, which generate complicated centrifugal forces, and consequently, equations of motion highly nonlinear. On the basis of this model, a control law has been developed able to perform position control of the crane while actively dam** the oscillations of the load. The effectiveness of the approach has been tested in simulation with realistic physical parameters and tested in the presence of wind disturbances. △ Less

Submitted 3 March, 2021; originally announced March 2021.

Comments: the paper was published in 37th International Symposium on Automation and Robotics in Construction (ISARC 2020)

Journal ref: 2020 Proceedings of the 37th ISARC, Kitakyushu, Japan

A Sum-of-Squares-Based Procedure to Approximate the Pontryagin Difference of Semialgebraic Sets

Authors: Andres Cotorruelo, Ilya Kolmanovsky, Emanuele Garone

Abstract: The P-difference between two sets $\mathcal{A}$ and $\mathcal{B}$ is the set of all points, $\mathcal{C}$, such that the addition of $\mathcal{B}$ to any of the points in $\mathcal{C}$ is contained in $\mathcal{A}$. Such a set difference plays an important role in robust model predictive control and in set-theoretic control. In the paper we demonstrate that an inner approximation of the P-differen… ▽ More The P-difference between two sets $\mathcal{A}$ and $\mathcal{B}$ is the set of all points, $\mathcal{C}$, such that the addition of $\mathcal{B}$ to any of the points in $\mathcal{C}$ is contained in $\mathcal{A}$. Such a set difference plays an important role in robust model predictive control and in set-theoretic control. In the paper we demonstrate that an inner approximation of the P-difference between two semialgebraic sets can be computed using the Sums of Squares Programming, and we illustrate the procedure using several computational examples. △ Less

Submitted 13 August, 2020; originally announced August 2020.

Smart Testing and Selective Quarantine for the Control of Epidemics

Authors: Matthias Pezzutto, Nicolas Bono Rossello, Luca Schenato, Emanuele Garone

Abstract: This paper is based on the observation that, during Covid-19 epidemic, the choice of which individuals should be tested has an important impact on the effectiveness of selective confinement measures. This decision problem is closely related to the problem of optimal sensor selection, which is a very active research subject in control engineering. The goal of this paper is to propose a policy to sm… ▽ More This paper is based on the observation that, during Covid-19 epidemic, the choice of which individuals should be tested has an important impact on the effectiveness of selective confinement measures. This decision problem is closely related to the problem of optimal sensor selection, which is a very active research subject in control engineering. The goal of this paper is to propose a policy to smartly select the individuals to be tested. The main idea is to model the epidemics as a stochastic dynamic system and to select the individual to be tested accordingly to some optimality criteria, e.g. to minimize the probability of undetected asymptomatic cases. Every day, the probability of infection of the different individuals is updated making use of the stochastic model of the phenomenon and of the information collected in the previous days. Simulations for a closed community of 10000 individuals show that the proposed technique, coupled with a selective confinement policy, can reduce the spread of the disease while limiting the number of individuals confined if compared to the simple contact tracing of positive and to an off-line test selection strategy based on the number of contacts. △ Less

Submitted 22 December, 2020; v1 submitted 30 July, 2020; originally announced July 2020.

Comments: Preprint submitted to Annual Reviews in Control. Updated on 22 December 2020

Nonlinear MPC for Tracking for a Class of Non-Convex Admissible Output Sets

Authors: Andres Cotorruelo, Daniel R. Ramirez, Daniel Limon, Emanuele Garone

Abstract: This paper presents an extension to the nonlinear Model Predictive Control for Tracking scheme able to guarantee convergence even in cases of non-convex output admissible sets. This is achieved by incorporating a convexifying homeomorphism in the optimization problem, allowing it to be solved in the convex space. A novel class of non-convex sets is also defined for which a systematic procedure to… ▽ More This paper presents an extension to the nonlinear Model Predictive Control for Tracking scheme able to guarantee convergence even in cases of non-convex output admissible sets. This is achieved by incorporating a convexifying homeomorphism in the optimization problem, allowing it to be solved in the convex space. A novel class of non-convex sets is also defined for which a systematic procedure to construct a convexifying homeomorphism is provided. This homeomorphism is then embedded in the Model Predictive Control optimization problem in such a way that the homeomorphism is no longer required in closed form. Finally, the effectiveness of the proposed method is showcased through an illustrative example. △ Less

Submitted 14 July, 2020; originally announced July 2020.

Reference Dependent Invariant Sets: Sum of Squares Based Computation and Applications in Constrained Control

Authors: Andres Cotorruelo, Mehdi Hosseinzadeh, Daniel R. Ramirez, Daniel Limon, Emanuele Garone

Abstract: The goal of this paper is to present a systematic method to compute reference dependent positively invariant sets for systems subject to constraints. To this end, we first characterize these sets as level sets of reference dependent Lyapunov functions. Based on this characterization and using Sum of Squares (SOS) theory, we provide a polynomial certificate for the existence of such sets. Subsequen… ▽ More The goal of this paper is to present a systematic method to compute reference dependent positively invariant sets for systems subject to constraints. To this end, we first characterize these sets as level sets of reference dependent Lyapunov functions. Based on this characterization and using Sum of Squares (SOS) theory, we provide a polynomial certificate for the existence of such sets. Subsequently, through some algebraic manipulations, we express this certificate in terms of a Semi-Definite Programming (SDP) problem which maximizes the size of the resulting reference dependent invariant sets. We then present the results of implementing the proposed method to an example system and propose some variations of the proposed method that may help in reducing the numerical issues of the method. Finally, the proposed method is employed in the Model Predictive Control (MPC) for Tracking scheme to compute the terminal set, and in the Explicit Reference Governor (ERG) scheme to compute the so-called Dynamic Safety Margin (DSM). The effectiveness of the proposed method in each of the schemes is demonstrated through a simulation study. △ Less

Submitted 29 June, 2020; originally announced June 2020.

Elimination of Redundant Polynomial Constraints and Its Use in Constrained Control

Authors: Andres Cotorruelo, Ilya Kolmanovsky, Daniel R. Ramírez, Daniel Limon, Emanuele Garone

Abstract: The reduction of constraints to obtain minimal representations of sets is a very common problem in many engineering applications. While well-established methodologies exist for the case of linear constraints, the problem of how to detect redundant non-linear constraints is an open problem. In this paper we present a novel methodology based on Sum of Squares for the elimination of redundant polynom… ▽ More The reduction of constraints to obtain minimal representations of sets is a very common problem in many engineering applications. While well-established methodologies exist for the case of linear constraints, the problem of how to detect redundant non-linear constraints is an open problem. In this paper we present a novel methodology based on Sum of Squares for the elimination of redundant polynomial constraints. The paper also presents some relevant applications of the presented method to constrained control problems. In particular, we show how the proposed method can be used in the Model Predictive Control and in the Reference Governor frameworks to reduce the computational burden of the online algorithms. Furthermore, this method can also be used to eliminate the terminal constraints in MPC in a simple way that is independent from the cost function. △ Less

Submitted 26 June, 2020; originally announced June 2020.

Information-Driven Path Planning for UAV with Limited Autonomy in Large-scale Field Monitoring

Authors: Nicolas Bono Rossello, Renzo Fabrizio Carpio, Andrea Gasparri, Emanuele Garone

Abstract: This paper presents a novel information-based mission planner for a drone tasked to monitor a spatially distributed dynamical phenomenon. For the sake of simplicity, the area to be monitored is discretized. The insight behind the proposed approach is that, thanks to the spatio-temporal dependencies of the observed phenomenon, one does not need to collect data on the entire area. In fact, unmeasure… ▽ More This paper presents a novel information-based mission planner for a drone tasked to monitor a spatially distributed dynamical phenomenon. For the sake of simplicity, the area to be monitored is discretized. The insight behind the proposed approach is that, thanks to the spatio-temporal dependencies of the observed phenomenon, one does not need to collect data on the entire area. In fact, unmeasured states can be estimated using an estimator, such as a Kalman filter. In this context the planning problem becomes the one of generating a flight path that maximizes the quality of the state estimation while satisfying the flight constraints (e.g. flight time). The first result of this paper is to formulate this problem as a special Orienteering Problem where the cost function is a measure of the quality of the estimation. This approach provides a Mixed-Integer Semi-Definite formulation to the problem which can be optimally solved for small instances. For larger instances, two heuristics are proposed which provide good sub-optimal results. To conclude, numerical simulations are shown to prove the capabilities and efficiency of the proposed path planning strategy. We believe this approach has the potential to increase dramatically the area that a drone can monitor, thus increasing the number of applications where monitoring with drones can become economically convenient. △ Less

Submitted 15 March, 2021; v1 submitted 19 June, 2020; originally announced June 2020.

Comments: Submitted to "IEEE Transactions on Automation Science and Engineering"

Technical Note for "A Geodesic Approach for the Control of Tethered Quadrotors"

Authors: Tam W. Nguyen, Marco M. Nicotra, Emanuele Garone

Abstract: This technical note focuses on the control of a quadrotor unmanned aerial vehicle (UAV) tethered to the ground. The control objective is to stabilize the UAV to the desired position while ensuring that the cable remains taut at all times. A cascade control scheme is proposed. The inner loop controls the attitude of the UAV. The outer loop gives the attitude reference to the inner loop, and is desi… ▽ More This technical note focuses on the control of a quadrotor unmanned aerial vehicle (UAV) tethered to the ground. The control objective is to stabilize the UAV to the desired position while ensuring that the cable remains taut at all times. A cascade control scheme is proposed. The inner loop controls the attitude of the UAV. The outer loop gives the attitude reference to the inner loop, and is designed so that (i) the gravity force is compensated, (ii) the cable is taut at all times, and (iii) the trajectory of the UAV follows the geodesic path. To prove asymptotic stability, small gain arguments are used. The control scheme is augmented with a reference governor to enforce constraints. △ Less

Submitted 23 February, 2019; originally announced February 2019.

Constrained Control of Depth of Hypnosis During Induction Phase

Authors: Mehdi Hosseinzadeh, Guy A. Dumont, Emanuele Garone

Abstract: This paper proposes a constrained control scheme for the control of the depth of hypnosis during induction phase in clinical anesthesia. In contrast with existing control schemes for propofol delivery, the proposed scheme guarantees overdosing prevention while ensuring good performance. The core idea is to reformulate overdosing prevention as a constraint, and then use the recently introduced Expl… ▽ More This paper proposes a constrained control scheme for the control of the depth of hypnosis during induction phase in clinical anesthesia. In contrast with existing control schemes for propofol delivery, the proposed scheme guarantees overdosing prevention while ensuring good performance. The core idea is to reformulate overdosing prevention as a constraint, and then use the recently introduced Explicit Reference Governor to enforce the constraint satisfaction at all times. The proposed scheme is evaluated in comparison with a robust PID controller on a simulated surgical procedure for 44 patients whose Pharmacokinetic-Pharmacodynamic models have been identified using clinical data. The results demonstrate that the proposed constrained control scheme can deliver propofol to yield good induction phase response while preventing overdosing in patients; whereas other existing schemes might cause overdosing in some patients. Simulations show that mean rise time, mean settling time, and mean overshoot of less than 5 [min], 8 [min], and 10%, respectively, are achieved, which meet typical anesthesiologists' response specifications. △ Less

Submitted 29 November, 2018; originally announced December 2018.

Steady-state input calculation for achieving a desired steady-state output of a linear systems

Authors: Raffaele Romagnoli, Emanuele Garone

Abstract: In this note we provide an algorithm for the computation of the steady-state input able to achieve the steady-state output tracking of any desired output signal representable as a rational transfer function. In this note we provide an algorithm for the computation of the steady-state input able to achieve the steady-state output tracking of any desired output signal representable as a rational transfer function. △ Less

Submitted 7 March, 2018; originally announced April 2018.

Explicit Reference Governor for the Constrained Control of Time-Delayed Linear Systems

Authors: Marco M. Nicotra, Tam Nguyen, Emanuele Garone, Ilya V. Kolmanovsky

Abstract: This paper introduces an explicit reference governor approach for controlling time delay linear systems subject to state and input constraints. The proposed framework relies on suitable invariant sets that can be built using both Lyapunov-Razumikhin and Lyapunov-Krasovskii arguments. The proposed method is validated both numerically and experimentally using several alternative formulations. This paper introduces an explicit reference governor approach for controlling time delay linear systems subject to state and input constraints. The proposed framework relies on suitable invariant sets that can be built using both Lyapunov-Razumikhin and Lyapunov-Krasovskii arguments. The proposed method is validated both numerically and experimentally using several alternative formulations. △ Less

Submitted 21 December, 2017; originally announced December 2017.

A Passivity-Based Distributed Reference Governor for Constrained Robotic Networks

Authors: Tam Nguyen, Takeshi Hatanaka, Mamoru Doi, Emanuele Garone, Masayuki Fujita

Abstract: This paper focuses on a passivity-based distributed reference governor (RG) applied to a pre-stabilized mobile robotic network. The novelty of this paper lies in the method used to solve the RG problem, where a passivity-based distributed optimization scheme is proposed. In particular, the gradient descent method minimizes the global objective function while the dual ascent method maximizes the Ha… ▽ More This paper focuses on a passivity-based distributed reference governor (RG) applied to a pre-stabilized mobile robotic network. The novelty of this paper lies in the method used to solve the RG problem, where a passivity-based distributed optimization scheme is proposed. In particular, the gradient descent method minimizes the global objective function while the dual ascent method maximizes the Hamiltonian. To make the agents converge to the agreed optimal solution, a proportional-integral consensus estimator is used. This paper proves the convergence of the state estimates of the RG to the optimal solution through passivity arguments, considering the physical system static. Then, the effectiveness of the scheme considering the dynamics of the physical system is demonstrated through simulations and experiments. △ Less

Submitted 19 March, 2017; originally announced March 2017.

Comments: 8 pages, International Federation of Automatic Conference 2017, 8 figures

Proof of Control of a UAV and a UGV Cooperating to Manipulate an Object

Authors: Tam Nguyen, Emanuele Garone

Abstract: This paper focuses on the control of a system composed of an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV) which cooperate to manipulate an object. The two units are subject to actuator saturations and cooperate to move the object to a desired pose, characterized by its position and inclination. The paper proposes a control strategy where the ground vehicle is tasked to deploy… ▽ More This paper focuses on the control of a system composed of an Unmanned Aerial Vehicle (UAV) and an Unmanned Ground Vehicle (UGV) which cooperate to manipulate an object. The two units are subject to actuator saturations and cooperate to move the object to a desired pose, characterized by its position and inclination. The paper proposes a control strategy where the ground vehicle is tasked to deploy the object to a certain position, whereas the aerial vehicle adjusts its inclination. The ground vehicle is governed by a saturated proportional-derivative control law. The aerial vehicle is regulated by means of a cascade control specifically designed for this problem that is able to exploit the mechanical interconnection. The stability of the overall system is proved through Input-to-State Stability and Small Gain theorem arguments. To solve the problem of constraints satisfaction, a nonlinear Reference Governor scheme is implemented. Numerical simulations are provided to demonstrate the effectiveness of the proposed method. △ Less

Submitted 1 March, 2016; v1 submitted 29 February, 2016; originally announced February 2016.

Comments: 8 pages, 5 figures, American Control Conference (ACC) 2016

Explicit Reference Governor for Continuous Time Nonlinear Systems Subject to Convex Constraints

Authors: Emanuele Garone, Marco M. Nicotra

Abstract: This paper introduces a novel closed-form strategy that dynamically modifies the reference of a pre-compensated nonlinear system to ensure the satisfaction of a set of convex constraints. The main idea consists of translating constraints in the state space into constraints on the Lyapunov function and then modulating the reference velocity so as to limit the value of the Lyapunov function. The the… ▽ More This paper introduces a novel closed-form strategy that dynamically modifies the reference of a pre-compensated nonlinear system to ensure the satisfaction of a set of convex constraints. The main idea consists of translating constraints in the state space into constraints on the Lyapunov function and then modulating the reference velocity so as to limit the value of the Lyapunov function. The theory is introduced for general nonlinear systems subject to convex constraints. In the case of polyhedric constraints, an explicit solution is provided for the large and highly relevant class of nonlinear systems whose Lyapunov function is lower-bounded by a quadratic form. In view of improving performances, further specializations are provided for the relevant cases of linear systems and robotic manipulators. △ Less

Submitted 6 June, 2014; originally announced June 2014.

Comments: Submitted to: IEEE Transactions on Automatic Control

Stochastic Sensor Scheduling for Energy Constrained Estimation in Multi-Hop Wireless Sensor Networks

Authors: Yilin Mo, Emanuele Garone, Alessandro Casavola, Bruno Sinopoli

Abstract: Wireless Sensor Networks (WSNs) enable a wealth of new applications where remote estimation is essential. Individual sensors simultaneously sense a dynamic process and transmit measured information over a shared channel to a central fusion center. The fusion center computes an estimate of the process state by means of a Kalman filter. In this paper we assume that the WSN admits a tree topology wit… ▽ More Wireless Sensor Networks (WSNs) enable a wealth of new applications where remote estimation is essential. Individual sensors simultaneously sense a dynamic process and transmit measured information over a shared channel to a central fusion center. The fusion center computes an estimate of the process state by means of a Kalman filter. In this paper we assume that the WSN admits a tree topology with fusion center at the root. At each time step only a subset of sensors can be selected to transmit observations to the fusion center due to a limited energy budget. We propose a stochastic sensor selection algorithm that randomly selects a subset of sensors according to certain probability distribution, which is opportunely designed to minimize the asymptotic expected estimation error covariance matrix. We show that the optimal stochastic sensor selection problem can be relaxed into a convex optimization problem and thus solved efficiently. We also provide a possible implementation of our algorithm which does not introduce any communication overhead. The paper ends with some numerical examples that show the effectiveness of the proposed approach. △ Less

Submitted 8 July, 2011; originally announced July 2011.

Comments: 7 pages, 2 figures, complete version of a technical note for the IEEE transactions on automatic control