-
Design and Control of a VTOL Aerial Vehicle Tilting its Rotors Only with Rotor Thrusts and a Passive Joint
Authors:
Takumi Ito,
Riku Funada,
Mitsuji Sampei
Abstract:
This paper presents a novel VTOL UAV that owns a link connecting four rotors and a fuselage by a passive joint, allowing the control of the rotor's tilting angle by adjusting the rotors' thrust. This unique structure contributes to eliminating additional actuators, such as servo motors, to control the tilting angles of rotors, resulting in the UAV's weight lighter and simpler structure. We first d…
▽ More
This paper presents a novel VTOL UAV that owns a link connecting four rotors and a fuselage by a passive joint, allowing the control of the rotor's tilting angle by adjusting the rotors' thrust. This unique structure contributes to eliminating additional actuators, such as servo motors, to control the tilting angles of rotors, resulting in the UAV's weight lighter and simpler structure. We first derive the dynamical model of the newly designed UAV and analyze its controllability. Then, we design the controller that leverages the tiltable link with four rotors to accelerate the UAV while suppressing a deviation of the UAV's angle of attack from the desired value to restrain the change of the aerodynamic force. Finally, the validity of the proposed control strategy is evaluated in simulation study.
△ Less
Submitted 9 November, 2023;
originally announced November 2023.
-
Collision Avoidance for Ellipsoidal Rigid Bodies with Control Barrier Functions Designed from Rotating Supporting Hyperplanes
Authors:
Riku Funada,
Koju Nishimoto,
Tatsuya Ibuki,
Mitsuji Sampei
Abstract:
This paper proposes a collision avoidance method for ellipsoidal rigid bodies, which utilizes a control barrier function (CBF) designed from a supporting hyperplane. We formulate the problem in the Special Euclidean Group SE(2) and SE(3), where the dynamics are described as rigid body motion (RBM). Then, we consider the condition for separating two ellipsoidal rigid bodies by employing a signed di…
▽ More
This paper proposes a collision avoidance method for ellipsoidal rigid bodies, which utilizes a control barrier function (CBF) designed from a supporting hyperplane. We formulate the problem in the Special Euclidean Group SE(2) and SE(3), where the dynamics are described as rigid body motion (RBM). Then, we consider the condition for separating two ellipsoidal rigid bodies by employing a signed distance from a supporting hyperplane of a rigid body to the other rigid body. Although the positive value of this signed distance implies that two rigid bodies are collision-free, a naively prepared supporting hyperplane yields a smaller value than the actual distance. To avoid such a conservative evaluation, the supporting hyperplane is rotated so that the signed distance from the supporting hyperplane to the other rigid body is maximized. We prove that the maximum value of this optimization problem is equal to the actual distance between two ellipsoidal rigid bodies, hence eliminating excessive conservativeness. We leverage this signed distance as a CBF to prevent collision while the supporting hyperplane is rotated via a gradient-based input. The designed CBF is integrated into a quadratic programming (QP) problem, where each rigid body calculates its collision-free input in a distributed manner, given communication among rigid bodies. The proposed method is demonstrated with simulations. Finally, we exemplify our method can be extended to a vehicle having nonholonomic dynamics.
△ Less
Submitted 23 August, 2023;
originally announced August 2023.
-
Distributed Coverage Hole Prevention for Visual Environmental Monitoring with Quadcopters via Nonsmooth Control Barrier Functions
Authors:
Riku Funada,
MarĂa Santos,
Ryuichi Maniwa,
Junya Yamauchi,
Masayuki Fujita,
Mitsuji Sampei,
Magnus Egerstedt
Abstract:
This paper proposes a distributed coverage control strategy for quadcopters equipped with downward-facing cameras that prevents the appearance of unmonitored areas in between the quadcopters' fields of view (FOVs). We derive a necessary and sufficient condition for eliminating any unsurveilled area that may arise in between the FOVs among a trio of quadcopters by utilizing a power diagram, i.e. a…
▽ More
This paper proposes a distributed coverage control strategy for quadcopters equipped with downward-facing cameras that prevents the appearance of unmonitored areas in between the quadcopters' fields of view (FOVs). We derive a necessary and sufficient condition for eliminating any unsurveilled area that may arise in between the FOVs among a trio of quadcopters by utilizing a power diagram, i.e. a weighted Voronoi diagram defined by radii of FOVs. Because this condition can be described as logically combined constraints, we leverage nonsmooth control barrier functions (NCBFs) to prevent the appearance of unmonitored areas among a team's FOV. We then investigate the symmetric properties of the proposed NCBFs to develop a distributed algorithm. The proposed algorithm can support the switching of the NCBFs caused by changes of the quadcopters composing trios. The existence of the control input satisfying NCBF conditions is analyzed by employing the characteristics of the power diagram. The proposed framework is synthesized with a coverage control law that maximizes the monitoring quality while reducing overlaps of FOVs. The proposed method is demonstrated in simulation and experiment.
△ Less
Submitted 4 January, 2024; v1 submitted 5 November, 2022;
originally announced November 2022.
-
Collision Avoidance for Elliptical Agents with Control Barrier Function Utilizing Supporting Lines
Authors:
Koju Nishimoto,
Riku Funada,
Tatsuya Ibuki,
Mitsuji Sampei
Abstract:
This paper presents a collision avoidance method for elliptical agents traveling in a two-dimensional space. We first formulate a separation condition for two elliptical agents utilizing a signed distance from a supporting line of an agent to the other agent, which renders a positive value if two ellipses are separated by the line. Because this signed distance could yield a shorter length than the…
▽ More
This paper presents a collision avoidance method for elliptical agents traveling in a two-dimensional space. We first formulate a separation condition for two elliptical agents utilizing a signed distance from a supporting line of an agent to the other agent, which renders a positive value if two ellipses are separated by the line. Because this signed distance could yield a shorter length than the actual distance between two ellipses, the supporting line is rotated so that the signed distance from the line to the other ellipse is maximized. We prove that this maximization problem renders the signed distance equivalent to the actual distance between two ellipses, hence not causing the conservative evasive motion. Then, we propose the collision avoidance method utilizing novel control barrier functions incorporating a gradient-based update law of a supporting line. The validity of the proposed methods is evaluated in the simulations.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Dynamic Allocation of Visual Attention for Vision-based Autonomous Navigation under Data Rate Constraints
Authors:
Ali Reza Pedram,
Riku Funada,
Takashi Tanaka
Abstract:
This paper considers the problem of task-dependent (top-down) attention allocation for vision-based autonomous navigation using known landmarks. Unlike the existing paradigm in which landmark selection is formulated as a combinatorial optimization problem, we model it as a resource allocation problem where the decision-maker (DM) is granted extra freedom to control the degree of attention to each…
▽ More
This paper considers the problem of task-dependent (top-down) attention allocation for vision-based autonomous navigation using known landmarks. Unlike the existing paradigm in which landmark selection is formulated as a combinatorial optimization problem, we model it as a resource allocation problem where the decision-maker (DM) is granted extra freedom to control the degree of attention to each landmark. The total resource available to DM is expressed in terms of the capacity limit of the in-take information flow, which is quantified by the directed information from the state of the environment to the DM's observation. We consider a receding horizon implementation of such a controlled sensing scheme in the Linear-Quadratic-Gaussian (LQG) regime. The convex-concave procedure is applied in each time step, whose time complexity is shown to be linear in the horizon length if the alternating direction method of multipliers (ADMM) is used. Numerical studies show that the proposed formulation is sparsity-promoting in the sense that it tends to allocate zero data rate to uninformative landmarks.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Rationally Inattentive Path-Planning via RRT*
Authors:
Jeb Stefan,
Ali Reza Pedram,
Riku Funada,
Takashi Tanaka
Abstract:
We consider a path-planning scenario for a mobile robot traveling in a configuration space with obstacles under the presence of stochastic disturbances. A novel path length metric is proposed on the uncertain configuration space and then integrated with the existing RRT* algorithm. The metric is a weighted sum of two terms which capture both the Euclidean distance traveled by the robot and the per…
▽ More
We consider a path-planning scenario for a mobile robot traveling in a configuration space with obstacles under the presence of stochastic disturbances. A novel path length metric is proposed on the uncertain configuration space and then integrated with the existing RRT* algorithm. The metric is a weighted sum of two terms which capture both the Euclidean distance traveled by the robot and the perception cost, i.e., the amount of information the robot must perceive about the environment to follow the path safely. The continuity of the path length function with respect to the topology of the total variation metric is shown and the optimality of the Rationally Inattentive RRT* algorithm is discussed. Three numerical studies are presented which display the utility of the new algorithm.
△ Less
Submitted 27 February, 2020;
originally announced February 2020.
-
3-D Visual Coverage Based on Gradient Descent Techniques on Matrix Manifold and Its Application to Moving Objects Monitoring
Authors:
Takeshi Hatanaka,
Riku Funada,
Masayuki Fujita
Abstract:
This paper investigates coverage control for visual sensor networks based on gradient descent techniques on matrix manifolds. We consider the scenario that networked vision sensors with controllable orientations are distributed over 3-D space to monitor 2-D environment. Then, the decision variable must be constrained on the Lie group SO(3). The contribution of this paper is two folds. The first on…
▽ More
This paper investigates coverage control for visual sensor networks based on gradient descent techniques on matrix manifolds. We consider the scenario that networked vision sensors with controllable orientations are distributed over 3-D space to monitor 2-D environment. Then, the decision variable must be constrained on the Lie group SO(3). The contribution of this paper is two folds. The first one is technical, namely we formulate the coverage problem as an optimization problem on SO(3) without introducing local parameterization like Eular angles and directly apply the gradient descent algorithm on the manifold. The second technological contribution is to present not only the coverage control scheme but also the density estimation process including image processing and curve fitting while exemplifying its effectiveness through simulation of moving objects monitoring.
△ Less
Submitted 23 September, 2013;
originally announced September 2013.