-
Aerosense: A Self-Sustainable And Long-Range Bluetooth Wireless Sensor Node for Aerodynamic and Aeroacoustic Monitoring on Wind Turbines
Authors:
Tommaso Polonelli,
Hanna Müller,
Weikang Kong,
Raphael Fischer,
Luca Benini,
Michele Magno
Abstract:
This paper presents a low-power, self-sustainable, and modular wireless sensor node for aerodynamic and acoustic measurements on wind turbines and other industrial structures. It includes 40 high-accuracy barometers, 10 microphones, 5 differential pressure sensors, and implements a lossy and a lossless on-board data compression algorithm to decrease the transmission energy cost. The wireless trans…
▽ More
This paper presents a low-power, self-sustainable, and modular wireless sensor node for aerodynamic and acoustic measurements on wind turbines and other industrial structures. It includes 40 high-accuracy barometers, 10 microphones, 5 differential pressure sensors, and implements a lossy and a lossless on-board data compression algorithm to decrease the transmission energy cost. The wireless transmitter is based on Bluetooth Low Energy 5.1 tuned for long-range and high throughput while maintaining adequate per-bit energy efficiency (80 nJ). Moreover, we field-assessed the node capability to collect precise and accurate aerodynamic data. Outdoor experimental tests revealed that the system can acquire and sustain a data rate of 850 kbps over 438 m. The power consumption while collecting and streaming all measured data is 120 mW, enabling self-sustainability and long-term in-situ monitoring with a 111 cm^2 photovoltaic panel.
△ Less
Submitted 24 May, 2022;
originally announced May 2022.
-
Stabilization Techniques for Iterative Algorithms in Compressed Sensing
Authors:
Carmen Sippel,
Robert F. H. Fischer
Abstract:
Algorithms for signal recovery in compressed sensing (CS) are often improved by stabilization techniques, such as dam**, or the less widely known so-called fractional approach, which is based on the expectation propagation (EP) framework. These procedures are used to increase the steady-state performance, i.e., the performance after convergence, or assure convergence, when this is otherwise not…
▽ More
Algorithms for signal recovery in compressed sensing (CS) are often improved by stabilization techniques, such as dam**, or the less widely known so-called fractional approach, which is based on the expectation propagation (EP) framework. These procedures are used to increase the steady-state performance, i.e., the performance after convergence, or assure convergence, when this is otherwise not possible. In this paper, we give a thorough introduction and interpretation of several stabilization approaches. The effects of the stabilization procedures are examined and compared via numerical simulations and we show that a combination of several procedures can be beneficial for the performance of the algorithm.
△ Less
Submitted 30 September, 2021;
originally announced September 2021.
-
Predicting Vehicles' Longitudinal Trajectories and Lane Changes on Highway On-Ramps
Authors:
Nachuan Li,
Riley Fischer,
Wissam Kontar,
Soyoung Ahn
Abstract:
Vehicles on highway on-ramps are one of the leading contributors to congestion. In this paper, we propose a prediction framework that predicts the longitudinal trajectories and lane changes (LCs) of vehicles on highway on-ramps and tapers. Specifically, our framework adopts a combination of prediction models that inputs a 4 seconds duration of a trajectory to output a forecast of the longitudinal…
▽ More
Vehicles on highway on-ramps are one of the leading contributors to congestion. In this paper, we propose a prediction framework that predicts the longitudinal trajectories and lane changes (LCs) of vehicles on highway on-ramps and tapers. Specifically, our framework adopts a combination of prediction models that inputs a 4 seconds duration of a trajectory to output a forecast of the longitudinal trajectories and LCs up to 15 seconds ahead. Training and Validation based on next generation simulation (NGSIM) data show that the prediction power of the developed model and its accuracy outperforms a traditional long-short term memory (LSTM) model. Ultimately, the work presented here can alleviate the congestion experienced on on-ramps, improve safety, and guide effective traffic control strategies.
△ Less
Submitted 23 August, 2021;
originally announced August 2021.
-
Semantic Security for Indoor THz-Wireless Communication
Authors:
Rebekka Schulz,
Onur Günlü,
Robert Elschner,
Rafael F. Schaefer,
Carsten Schmidt-Langhorst,
Colja Schubert,
Robert F. H. Fischer
Abstract:
Physical-layer security (PLS) for industrial indoor terahertz (THz) wireless communication applications is considered. We use a similar model as being employed for additive white Gaussian noise (AWGN) wireless communication channels. A cell communication and a directed communication scenario are analyzed to illustrate the achievable semantic security guarantees for a wiretap channel with finite-bl…
▽ More
Physical-layer security (PLS) for industrial indoor terahertz (THz) wireless communication applications is considered. We use a similar model as being employed for additive white Gaussian noise (AWGN) wireless communication channels. A cell communication and a directed communication scenario are analyzed to illustrate the achievable semantic security guarantees for a wiretap channel with finite-blocklength THz-wireless communication links. We show that weakly directed transmitter (Alice) antennas, which allow cell-type communication with multiple legitimate receivers (Bobs) without adaptation of the alignment, result in large insecure regions. In the directed communication scenario, the resulting insecure regions are shown to cover a large volume of the indoor environment only if the distance between Alice and Bob is large. Thus, our results for the two selected scenarios reveal that there is a stringent trade-off between the targeted semantic security level and the number of reliably and securely accessible legitimate receivers. Furthermore, the effects of secrecy code parameters and antenna properties on the achievable semantic security levels are illustrated to show directions for possible improvements to guarantee practically-acceptable security levels with PLS methods for industrial indoor THz-wireless communication applications.
△ Less
Submitted 19 July, 2021; v1 submitted 20 May, 2021;
originally announced May 2021.
-
A Prioritized Trajectory Planning Algorithm for Connected and Automated Vehicle Mandatory Lane Changes
Authors:
Nachuan Li,
Austen Z. Fan,
Riley Fischer,
Wissam Kontar,
Bin Ran
Abstract:
We introduce a prioritized system-optimal algorithm for mandatory lane change (MLC) behavior of connected and automated vehicles (CAV) from a dedicated lane. Our approach applies a cooperative lane change that prioritizes the decisions of lane changing vehicles which are closer to the end of the diverging zone (DZ), and optimizes the predicted total system travel time. Our experiments on synthetic…
▽ More
We introduce a prioritized system-optimal algorithm for mandatory lane change (MLC) behavior of connected and automated vehicles (CAV) from a dedicated lane. Our approach applies a cooperative lane change that prioritizes the decisions of lane changing vehicles which are closer to the end of the diverging zone (DZ), and optimizes the predicted total system travel time. Our experiments on synthetic data show that the proposed algorithm improves the traffic network efficiency by attaining higher speeds in the dedicated lane and earlier MLC positions while ensuring a low computational time. Our approach outperforms the traditional gap acceptance model.
△ Less
Submitted 21 April, 2021;
originally announced April 2021.
-
On Discrete-Time/Frequency-Periodic End-to-End Fiber-Optical Channel Models
Authors:
Felix Frey,
Johannes K. Fischer,
Robert F. H. Fischer
Abstract:
A discrete-time end-to-end fiber-optical channel model is derived based on the first-order perturbation approach. The model relates the discrete-time input symbol sequences of co-propagating wavelength channels to the received symbol sequence after matched filtering and T-spaced sampling. To this end, the interference from both self- and cross-channel nonlinear interactions of the continuous-time…
▽ More
A discrete-time end-to-end fiber-optical channel model is derived based on the first-order perturbation approach. The model relates the discrete-time input symbol sequences of co-propagating wavelength channels to the received symbol sequence after matched filtering and T-spaced sampling. To this end, the interference from both self- and cross-channel nonlinear interactions of the continuous-time optical signal is represented by a single discrete-time perturbative term. Two equivalent discrete-time models can be formulated---one in the time-domain, the other in the 1/T-periodic continuous-frequency domain. The time-domain formulation coincides with the well-known pulse-collision picture. The novel frequency-domain picture incorporates the sampling operation via an aliased and periodic kernel description. This gives rise to an alternative perspective on the end-to-end input/output relation between the spectrum of the discrete-time transmit symbol sequence and the spectrum of the receive symbol sequence. Both views can be extended from a regular, i.e., solely additive model, to a combined regular-logarithmic model to take the multiplicative nature of certain distortions into consideration. An alternative formulation of the Gaussian Noise model is provided to take the aliasing of frequency components correctly into account. A novel algorithmic implementation of the discrete and periodic frequency-domain model is presented. The derived end-to-end model requires only a single computational step and shows good agreement in the mean-squared error sense compared to the oversampled and inherently sequential split-step Fourier method.
△ Less
Submitted 17 March, 2020; v1 submitted 13 July, 2019;
originally announced July 2019.
