-
Virtual reference feedback tuning with robustness constraints: A swarm intelligence solution
Authors:
L. V. Fiorio,
C. L. Remes,
P. Wheeler,
Y. R. de Novaes
Abstract:
The simplified modeling of a complex system allied with a low-order controller structure can lead to poor closed-loop performance and robustness. A feasible solution is to avoid the necessity of a model by using data for the controller design. The Virtual Reference Feedback Tuning (VRFT) is a data-driven design method that only requires a single batch of data and solves a reference tracking proble…
▽ More
The simplified modeling of a complex system allied with a low-order controller structure can lead to poor closed-loop performance and robustness. A feasible solution is to avoid the necessity of a model by using data for the controller design. The Virtual Reference Feedback Tuning (VRFT) is a data-driven design method that only requires a single batch of data and solves a reference tracking problem, although with no guarantee of robustness. In this work, the inclusion of an $\mathcal{H}_{\infty}$ robustness constraint to the VRFT cost function is addressed. The estimation of the $\mathcal{H}_{\infty}$ norm of the sensitivity transfer function is extended to maintain the one-shot characteristic of the VRFT. Swarm intelligence algorithms are used to solve the non-convex cost function. The proposed method is applied in two real-world inspired problems with four different swarm intelligence algorithms, which are compared with each other through a Monte Carlo experiment of 50 executions. The obtained results are satisfactory, achieving the desired robustness criteria.
△ Less
Submitted 4 August, 2023; v1 submitted 3 November, 2021;
originally announced November 2021.
-
Data-driven estimation of system norms via impulse response
Authors:
L. V. Fiorio,
C. L. Remes,
L. Campestrini,
Y. R. de Novaes
Abstract:
This paper proposes a method for estimating the norms of a system in a pure data-driven fashion based on their identified Impulse Response (IR) coefficients. The calculation of norms is briefly reviewed and the main expressions for the IR-based estimations are presented. As a case study, the $\mathcal{H}_{1}$, $\mathcal{H}_2$, and $\mathcal{H}_{\infty}$ norms of the sensitivity transfer function o…
▽ More
This paper proposes a method for estimating the norms of a system in a pure data-driven fashion based on their identified Impulse Response (IR) coefficients. The calculation of norms is briefly reviewed and the main expressions for the IR-based estimations are presented. As a case study, the $\mathcal{H}_{1}$, $\mathcal{H}_2$, and $\mathcal{H}_{\infty}$ norms of the sensitivity transfer function of five different discrete-time closed-loop systems are estimated for a Signal-to-Noise-Ratio (SNR) of 10 dB, achieving low percent error values if compared to the real value. To verify the influence of the noise amplitude, norms are estimated considering a wide range of SNR values, for a specific system, presenting low Mean Percent Error (MPE) if compared to the real norms. The proposed technique is also compared to an existing state-space-based method in terms of $\mathcal{H}_{\infty}$, through Monte Carlo, showing a reduction of approximately 48 % in the MPE for a wide range of SNR values.
△ Less
Submitted 8 November, 2021; v1 submitted 23 October, 2021;
originally announced October 2021.
-
Switched Control Applied to a Totem-Pole Bridgeless Rectifier for Power Factor Correction
Authors:
L. V. Fiorio,
T. J. M. Dezuo,
Y. R. de Novaes
Abstract:
The wide range of operation of bridgeless rectifiers requires a control technique that guarantee robustness. Linear Power Factor Correction (PFC) control techniques, although effective, cannot guarantee such robustness. Nonlinear techniques such as one cycle control are more robust, but other options should be explored. In this work, an affine model is obtained for a Totem-Pole Bridgeless Rectifie…
▽ More
The wide range of operation of bridgeless rectifiers requires a control technique that guarantee robustness. Linear Power Factor Correction (PFC) control techniques, although effective, cannot guarantee such robustness. Nonlinear techniques such as one cycle control are more robust, but other options should be explored. In this work, an affine model is obtained for a Totem-Pole Bridgeless Rectifier (TPBR). An extension to an existing switched control design technique is presented in order to achieve PFC in a robust fashion for the TPBR. Simulations with nonideal components and distorted grid voltage show a precise, fast and robust performance of the switched controller. The effective reference following of the proposed method allows the user to define a current reference waveform that prioritize THD or power factor, depending on the application and norm requirements.
△ Less
Submitted 19 October, 2021;
originally announced October 2021.
-
A Novel Sensorised Insole for Sensing Feet Pressure Distributions
Authors:
Ines Sorrentino,
Francisco Javier Andrade Chavez,
Claudia Latella,
Luca Fiorio,
Silvio Traversaro,
Lorenzo Rapetti,
Yeshasvi Tirupachuri,
Nuno Guedelha,
Marco Maggiali,
Simeone Dussoni,
Giorgio Metta,
Daniele Pucci
Abstract:
Wearable sensors are gaining in popularity because they enable outdoor experimental monitoring. This paper presents a cost-effective sensorised insole based on a mesh of tactile capacitive sensors. Each sensor's spatial resolution is about 4 taxels/cm^2 in order to have an accurate reconstruction of the contact pressure distribution. As a consequence, the insole provides information such as contac…
▽ More
Wearable sensors are gaining in popularity because they enable outdoor experimental monitoring. This paper presents a cost-effective sensorised insole based on a mesh of tactile capacitive sensors. Each sensor's spatial resolution is about 4 taxels/cm^2 in order to have an accurate reconstruction of the contact pressure distribution. As a consequence, the insole provides information such as contact forces, moments, and center of pressure. To retrieve this information, a calibration technique that fuses measurements from a vacuum chamber and shoes equipped with force/torque sensors is proposed. The validation analysis shows that the best performance achieved a root mean square error (RMSE) of about 7 N for the contact forces and 2 N m for the contact moments when using the force/torque shoe data as ground truth. Thus, the insole may be an alternative to force/torque sensors for certain applications, with a considerably more cost-effective and less invasive hardware.
△ Less
Submitted 2 February, 2020; v1 submitted 14 October, 2019;
originally announced October 2019.
-
Modeling, Identification and Control of Model Jet Engines for Jet Powered Robotics
Authors:
Giuseppe L'Erario,
Luca Fiorio,
Gabriele Nava,
Fabio Bergonti,
Hosameldin Awadalla Omer Mohamed,
Emilio Benenati,
Silvio Traversaro,
Daniele Pucci
Abstract:
The paper contributes towards the modeling, identification, and control of model jet engines. We propose a nonlinear, second order model in order to capture the model jet engines governing dynamics. The model structure is identified by applying sparse identification of nonlinear dynamics, and then the parameters of the model are found via gray-box identification procedures. Once the model has been…
▽ More
The paper contributes towards the modeling, identification, and control of model jet engines. We propose a nonlinear, second order model in order to capture the model jet engines governing dynamics. The model structure is identified by applying sparse identification of nonlinear dynamics, and then the parameters of the model are found via gray-box identification procedures. Once the model has been identified, we approached the control of the model jet engine by designing two control laws. The first one is based on the classical Feedback Linearization technique while the second one on the Sliding Mode control. The overall methodology has been verified by modeling, identifying and controlling two model jet engines, i.e. P100-RX and P220-RXi developed by JetCat, which provide a maximum thrust of 100 N and 220 N, respectively.
△ Less
Submitted 4 June, 2020; v1 submitted 29 September, 2019;
originally announced September 2019.
