Showing 1–8 of 8 results for author: Farrell, J

Data-Driven Personalized Energy Consumption Range Estimation for Plug-in Hybrid Electric Vehicles in Urban Traffic

Authors: Mehmet Fatih Ozkan, James Farrell, Marcello Telloni, Luis Mendez, Radu Pirvan, Jeffrey P. Chrstos, Marcello Canova, Stephanie Stockar

Abstract: In urban traffic environments, driver behaviors exhibit considerable diversity in vehicle operation, encompassing a range of acceleration and braking maneuvers as well as adherence to traffic regulations, such as speed limits. It is well-established that these intrinsic driving behaviors significantly influence vehicle energy consumption. Therefore, establishing a quantitative relationship between… ▽ More In urban traffic environments, driver behaviors exhibit considerable diversity in vehicle operation, encompassing a range of acceleration and braking maneuvers as well as adherence to traffic regulations, such as speed limits. It is well-established that these intrinsic driving behaviors significantly influence vehicle energy consumption. Therefore, establishing a quantitative relationship between driver behavior and energy usage is essential for identifying energy-efficient driving practices and optimizing routes within urban traffic. This study introduces a data-driven approach to predict the equivalent fuel consumption of a plug-in hybrid electric vehicle (PHEV) based on an integrated model of driver behavior and vehicle energy consumption. Unlike traditional models that provide point predictions of fuel consumption, this approach uses Conformalized Quantile Regression (CQR) to offer prediction intervals that capture the variability and uncertainty in fuel consumption. These intervals reflect changes in fuel consumption, as well as variations in driver behavior, and vehicle and route conditions. To develop this model, driver-specific data were collected through a driver-in-the-loop simulator, which tested different human drivers responses. The CQR model was then trained and validated using the experimental data from the driver-in-the-loop simulator, augmented by the synthetic data generated from Monte Carlo simulations conducted using a calibrated microscopic driver behavior and vehicle energy model. The CQR model was evaluated by comparing its predictions of equivalent fuel consumption intervals with those of baseline prediction interval methods that rely solely on conformal prediction. △ Less

Submitted 9 June, 2024; v1 submitted 27 May, 2024; originally announced May 2024.

Outlier Accommodation for GNSS Precise Point Positioning using Risk-Averse State Estimation

Authors: Wang Hu, Jean-Bernard Uwineza, Jay A. Farrell

Abstract: Reliable and precise absolute positioning is necessary in the realm of Connected Automated Vehicles (CAV). Global Navigation Satellite Systems (GNSS) provides the foundation for absolute positioning. Recently enhanced Precise Point Positioning (PPP) technology now offers corrections for GNSS on a global scale, with the potential to achieve accuracy suitable for real-time CAV applications. However,… ▽ More Reliable and precise absolute positioning is necessary in the realm of Connected Automated Vehicles (CAV). Global Navigation Satellite Systems (GNSS) provides the foundation for absolute positioning. Recently enhanced Precise Point Positioning (PPP) technology now offers corrections for GNSS on a global scale, with the potential to achieve accuracy suitable for real-time CAV applications. However, in obstructed sky conditions, GNSS signals are often affected by outliers; therefore, addressing outliers is crucial. In GNSS applications, there are many more measurements available than are required to meet the specification. Therefore, selecting measurements to avoid outliers is of interest. The recently developed Risk-Averse Performance-Specified (RAPS) state estimation optimally selects measurements to minimize outlier risk while meeting a positive semi-definite constraint on performance; at present, the existing solution methods are not suitable for real-time computation and have not been demonstrated using challenging real-world data or in Real-time PPP (RT-PPP) applications. This article makes contributions in a few directions. First, it uses a diagonal performance specification, which reduces computational costs relative to the positive semi-definite constraint. Second, this article considers GNSS RT-PPP applications. Third, the experiments use real-world GNSS data collected in challenging environments. The RT-PPP experimental results show that among the compared methods: all achieve comparable performance in open-sky conditions, and all exceed the Society of Automotive Engineers (SAE) specification; however, in challenging environments, the diagonal RAPS approach shows improvement of 6-19% over traditional methods. Throughout, RAPS achieves the lowest estimation risk. △ Less

Submitted 13 March, 2024; v1 submitted 2 February, 2024; originally announced February 2024.

Comments: 7 pages,2 figures, Accepted by 2024 American Control Conference

Using simulation to quantify the performance of automotive perception systems

Authors: Zhenyi Liu, Devesh Shah, Alireza Rahimpour, Devesh Upadhyay, Joyce Farrell, Brian A Wandell

Abstract: The design and evaluation of complex systems can benefit from a software simulation - sometimes called a digital twin. The simulation can be used to characterize system performance or to test its performance under conditions that are difficult to measure (e.g., nighttime for automotive perception systems). We describe the image system simulation software tools that we use to evaluate the performan… ▽ More The design and evaluation of complex systems can benefit from a software simulation - sometimes called a digital twin. The simulation can be used to characterize system performance or to test its performance under conditions that are difficult to measure (e.g., nighttime for automotive perception systems). We describe the image system simulation software tools that we use to evaluate the performance of image systems for object (automobile) detection. We describe experiments with 13 different cameras with a variety of optics and pixel sizes. To measure the impact of camera spatial resolution, we designed a collection of driving scenes that had cars at many different distances. We quantified system performance by measuring average precision and we report a trend relating system resolution and object detection performance. We also quantified the large performance degradation under nighttime conditions, compared to daytime, for all cameras and a COCO pre-trained network. △ Less

Submitted 10 March, 2023; v1 submitted 2 March, 2023; originally announced March 2023.

Assessment of U.S. Department of Transportation Lane-Level Map for Connected Vehicle Applications

Authors: Wang Hu, David Oswald, Guoyuan Wu, Jay A. Farrell

Abstract: High-definition (Hi-Def) digital maps are an indispensable automated driving technology that is develo** rapidly. There are various commercial or governmental map products in the market. It is notable that the U.S. Department of Transportation (USDOT) map tool allows the user to create MAP and Signal Phase and Timing (SPaT) messages with free access. However, an analysis of the accuracy of this… ▽ More High-definition (Hi-Def) digital maps are an indispensable automated driving technology that is develo** rapidly. There are various commercial or governmental map products in the market. It is notable that the U.S. Department of Transportation (USDOT) map tool allows the user to create MAP and Signal Phase and Timing (SPaT) messages with free access. However, an analysis of the accuracy of this map tool is currently lacking in the literature. This paper provides such an analysis. The analysis manually selects 39 feature points within about 200 meters of the verified point and 55 feature points over longer distances from the verified point. All feature locations are surveyed using GNSS and mapped using the USDOT tool. Different error sources are evaluated to allow assessment of the USDOT map accuracy. In this investigation, The USDOT map tool is demonstrated to achieve 17 centimeters horizontal accuracy, which meets the lane-level map requirement. The maximum horizontal map error is less than 30 centimeters. △ Less

Submitted 28 June, 2022; originally announced June 2022.

Comments: 6 pages, 6 figures

Ray-transfer functions for camera simulation of 3D scenes with hidden lens design

Authors: Thomas Goossens, Zheng Lyu, Jamyuen Ko, Gordon Wan, Joyce Farrell, Brian Wandell

Abstract: Combining image sensor simulation tools (e.g., ISETCam) with physically based ray tracing (e.g., PBRT) offers possibilities for designing and evaluating novel imaging systems as well as for synthesizing physically accurate, labeled images for machine learning. One practical limitation has been simulating the optics precisely: Lens manufacturers generally prefer to keep lens design confidential. We… ▽ More Combining image sensor simulation tools (e.g., ISETCam) with physically based ray tracing (e.g., PBRT) offers possibilities for designing and evaluating novel imaging systems as well as for synthesizing physically accurate, labeled images for machine learning. One practical limitation has been simulating the optics precisely: Lens manufacturers generally prefer to keep lens design confidential. We present a pragmatic solution to this problem using a black box lens model in Zemax; such models provide necessary optical information while preserving the lens designer's intellectual property. First, we describe and provide software to construct a polynomial ray transfer function that characterizes how rays entering the lens at any position and angle subsequently exit the lens. We implement the ray-transfer calculation as a camera model in PBRT and confirm that the PBRT ray-transfer calculations match the Zemax lens calculations for edge spread functions and relative illumination. △ Less

Submitted 23 February, 2022; v1 submitted 17 February, 2022; originally announced February 2022.

Accurate smartphone camera simulation using 3D scenes

Authors: Zheng Lyu, Thomas Goossens, Brian Wandell, Joyce Farrell

Abstract: We assess the accuracy of a smartphone camera simulation. The simulation is an end-to-end analysis that begins with a physical description of a high dynamic range 3D scene and includes a specification of the optics and the image sensor. The simulation is compared to measurements of a physical version of the scene. The image system simulation accurately matched measurements of optical blur, depth o… ▽ More We assess the accuracy of a smartphone camera simulation. The simulation is an end-to-end analysis that begins with a physical description of a high dynamic range 3D scene and includes a specification of the optics and the image sensor. The simulation is compared to measurements of a physical version of the scene. The image system simulation accurately matched measurements of optical blur, depth of field, spectral quantum efficiency, scene inter-reflections, and sensor noise. The results support the use of image systems simulation methods for soft prototy** cameras and for producing synthetic data in machine learning applications. △ Less

Submitted 27 January, 2022; v1 submitted 18 January, 2022; originally announced January 2022.

Using PPP Information to Implement a Global Real-Time Virtual Network DGNSS Approach

Authors: Wang Hu, Ashim Neupane, Jay A. Farrell

Abstract: Differential GNSS (DGNSS) has been demonstrated to provide reliable, high-quality range correction information enabling real-time navigation with centimeter to sub-meter accuracy, which is required for applications such as connected and autonomous vehicles. However, DGNSS requires a local reference station near each user. For a continental or global scale implementation, this information dissemina… ▽ More Differential GNSS (DGNSS) has been demonstrated to provide reliable, high-quality range correction information enabling real-time navigation with centimeter to sub-meter accuracy, which is required for applications such as connected and autonomous vehicles. However, DGNSS requires a local reference station near each user. For a continental or global scale implementation, this information dissemination approach would require a dense network of reference stations whose construction and maintenance would be prohibitively expensive. Precise Point Positioning affords more flexibility as a public service for GNSS receivers, but its State Space Representation format is not supported by most receivers in the field or on the market. This article proposes a novel Virtual Network DGNSS (VN-DGNSS) approach and an optimization algorithm that is key to its implementation. The approach capitalizes on the existing PPP infrastructure without the need for new physical reference stations. By connecting to public GNSS SSR data services, a VN-DGNSS server maintains current information about common-mode errors. Construction of the RTCM Observation Space Representation messages from this SSR information requires both the signal time-of-transmission and the satellite position at that time which are consistent with the time-of-reception for each client. This article presents an algorithm to determine these quantities. The results of real-time stationary and moving platform evaluations are included, using u-blox M8P and ZED-F9P receivers. The performance surpasses the SAE specification (68% of horizontal error <= 1.5 m and vertical error <= 3 m) and shows significantly better horizontal performance than GNSS Open Service. The moving tests also show better horizontal performance than the ZED-F9P receiver with SBAS enabled and achieve the lane-level accuracy (95% of horizontal errors less than 1 meter). △ Less

Submitted 28 June, 2022; v1 submitted 22 September, 2021; originally announced October 2021.

Comments: 14 pages, 8 tables, 4 figures, Code and data are available at https://github.com/Azurehappen/Virtual-Network-DGNSS-Project

Journal ref: in IEEE Transactions on Vehicular Technology, vol. 71, no. 10, pp. 10337-10349, Oct. 2022

Validation of image systems simulation technology using a Cornell Box

Authors: Zheng Lyu, Krithin Kripakaran, Max Furth, Eric Tang, Brian Wandell, Joyce Farrell

Abstract: We describe and experimentally validate an end-to-end simulation of a digital camera. The simulation models the spectral radiance of 3D-scenes, formation of the spectral irradiance by multi-element optics, and conversion of the irradiance to digital values by the image sensor. We quantify the accuracy of the simulation by comparing real and simulated images of a precisely constructed, three-dimens… ▽ More We describe and experimentally validate an end-to-end simulation of a digital camera. The simulation models the spectral radiance of 3D-scenes, formation of the spectral irradiance by multi-element optics, and conversion of the irradiance to digital values by the image sensor. We quantify the accuracy of the simulation by comparing real and simulated images of a precisely constructed, three-dimensional high dynamic range test scene. Validated end-to-end software simulation of a digital camera can accelerate innovation by reducing many of the time-consuming and expensive steps in designing, building and evaluating image systems. △ Less

Submitted 10 May, 2021; originally announced May 2021.