-
Compressive Beam Alignment for Indoor Millimeter-Wave Systems
Authors:
April Junio,
Rafaela Lomboy,
Raj Sai Sohel Bandari,
Mohammed E. Eltayeb
Abstract:
The dynamic nature of indoor environments poses unique challenges for next-generation millimeter-wave (mmwave) connectivity. These challenges arise from blockages due to mobile obstacles, mm-wave signal scattering caused by indoor surfaces, and imperfections in phased antenna arrays. Consequently, traditional compressed sensing (CS) techniques for beam alignment become ineffective in practice unde…
▽ More
The dynamic nature of indoor environments poses unique challenges for next-generation millimeter-wave (mmwave) connectivity. These challenges arise from blockages due to mobile obstacles, mm-wave signal scattering caused by indoor surfaces, and imperfections in phased antenna arrays. Consequently, traditional compressed sensing (CS) techniques for beam alignment become ineffective in practice under such settings. This paper proposes a novel beam alignment technique suited for mm-wave systems operating in indoor environments. The proposed technique exploits the energy compaction property of the discrete cosine transform to compressively sense and identify the strongest cluster locations in the transform domain for robust beamforming. Experimental results at 60 GHz demonstrate successful beam alignment with limited measurements even in the presence of partial blockages during the beam training phase.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Antenna Selection in Switch-Based MIMO Arrays via DOA threshold region Approximation
Authors:
Hui Chen,
Tarig Ballal,
Mohammed E. Eltayeb,
Tareq Y. Al-Naffouri
Abstract:
Direction-of-arrival (DOA) information is vital for multiple-input-multiple-output (MIMO) systems to complete localization and beamforming tasks. Switched antenna arrays have recently emerged as an effective solution to reduce the cost and power consumption of MIMO systems. Switch-based array architectures connect a limited number of radio frequency chains to a subset of the antenna elements formi…
▽ More
Direction-of-arrival (DOA) information is vital for multiple-input-multiple-output (MIMO) systems to complete localization and beamforming tasks. Switched antenna arrays have recently emerged as an effective solution to reduce the cost and power consumption of MIMO systems. Switch-based array architectures connect a limited number of radio frequency chains to a subset of the antenna elements forming a subarray. This paper addresses the problem of antenna selection to optimize DOA estimation performance. We first perform a subarray layout alignment process to remove subarrays with identical beampatterns and create a unique subarray set. By using this set, and based on a DOA threshold region performance approximation, we propose two antenna selection algorithms; a greedy algorithm and a deep-learning-based algorithm. The performance of the proposed algorithms is evaluated numerically. The results show a significant performance improvement over selected benchmark approaches in terms of DOA estimation in the threshold region and computational complexity.
△ Less
Submitted 22 May, 2022;
originally announced May 2022.
-
Millimeter-Wave Antenna Array Diagnosis with Partial Channel State Information
Authors:
George Medina,
Akashdeep Singh Jida,
Sravan Pulipati,
Rohith Talwar,
Nancy Amala J,
Tareq Y. Al-Naffouri,
Arjuna Madanayake,
Mohammed Eltayeb
Abstract:
Large antenna arrays enable directional precoding for Millimeter-Wave (mmWave) systems and provide sufficient link budget to combat the high path-loss at these frequencies. Due to atmospheric conditions and hardware malfunction, outdoor mmWave antenna arrays are prone to blockages or complete failures. This results in a modified array geometry, distorted far-field radiation pattern, and system per…
▽ More
Large antenna arrays enable directional precoding for Millimeter-Wave (mmWave) systems and provide sufficient link budget to combat the high path-loss at these frequencies. Due to atmospheric conditions and hardware malfunction, outdoor mmWave antenna arrays are prone to blockages or complete failures. This results in a modified array geometry, distorted far-field radiation pattern, and system performance degradation. Recent remote array diagnostic techniques have emerged as an effective way to detect defective antenna elements in an array with few diagnostic measurements. These techniques, however, require full and perfect channel state information (CSI), which can be challenging to acquire in the presence of antenna faults. This paper proposes a new remote array diagnosis technique that relaxes the need for full CSI and only requires knowledge of the incident angle-of-arrivals, i.e. partial channel knowledge. Numerical results demonstrate the effectiveness of the proposed technique and show that fault detection can be obtained with comparable number of diagnostic measurements required by diagnostic techniques based on full channel knowledge. In presence of channel estimation errors, the proposed technique is shown to out-perform recently proposed array diagnostic techniques.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Exploiting Multi-Path for Safeguarding mmWave Communications Against Randomly Located Eavesdroppers
Authors:
Rohith Talwar,
Nancy Amala,
George Medina,
Akshadeep Singh Jida,
Mohammed E. Eltayeb
Abstract:
Communication in the millimeter-wave (mmWave) band has recently been proposed to enable giga-bit-per-second data rates for next generation wireless systems. Physical layer security techniques have emerged as a simple and yet effective way to safeguard these systems against eavesdrop** attacks. These techniques make use of the large antenna arrays available in mmWave systems to provide an array g…
▽ More
Communication in the millimeter-wave (mmWave) band has recently been proposed to enable giga-bit-per-second data rates for next generation wireless systems. Physical layer security techniques have emerged as a simple and yet effective way to safeguard these systems against eavesdrop** attacks. These techniques make use of the large antenna arrays available in mmWave systems to provide an array gain at the target receiver and degrade the signal quality at the eavesdropper. Despite their effectiveness, majority of these techniques are based on line-of-sight communication links between the transmitter and the receiver, and may fail in the presence of blockages or non-line-of-sight links. This paper builds upon previous work and extends physical layer security to the non-line-of-sight communication case and randomly located eavesdroppers. Specifically, the large dimensional antenna arrays in mmWave systems and the intrinsic characteristics of wireless channel are exploited to induce noiselike signals that jam eavesdroppers with sensitive receivers. Numerical results show that the proposed techniques provide higher secrecy rate when compared to conventional array and physical layer techniques based on line-of-sight links.
△ Less
Submitted 1 October, 2020;
originally announced October 2020.
-
Xilinx RF-SoC-based Digital Multi-Beam Array Processors for 28/60~GHz Wireless Testbeds
Authors:
Sravan Pulipati,
Viduneth Ariyarathna,
Aditya Dhananjay,
Mohammed E. Eltayeb,
Marco Mezzavilla,
Josep M. Jornet,
Soumyajit Mandal,
Shubhendu Bhardwaj,
Arjuna Madanayake
Abstract:
Emerging wireless applications such as 5G cellular, large intelligent surfaces (LIS), and holographic massive MIMO require antenna array processing at mm-wave frequencies with large numbers of independent digital transceivers. This paper summarizes the authors' recent progress on the design and testing of 28 GHz and 60 GHz fully-digital array processing platforms based on wideband reconfigurable F…
▽ More
Emerging wireless applications such as 5G cellular, large intelligent surfaces (LIS), and holographic massive MIMO require antenna array processing at mm-wave frequencies with large numbers of independent digital transceivers. This paper summarizes the authors' recent progress on the design and testing of 28 GHz and 60 GHz fully-digital array processing platforms based on wideband reconfigurable FPGA-based software-defined radios (SDRs). The digital baseband and microwave interfacing aspects of the SDRs are implemented on single-chip RF system-on-chip (RF-SoC) processors from Xilinx. Two versions of the RF-SoC technology (ZCU-111 and ZCU-1275) were used to implement fully-digital real-time array processors at 28~GHz (realizing 4 parallel beams with 0.8 GHz bandwidth per beam) and 60~GHz (realizing 4 parallel beams with 1.8~GHz bandwidth per beam). Dielectric lenslet arrays fed by a digital phased-array feed (PAF) located on the focal plane are proposed for further increasing antenna array gain.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Relay-Aided Channel Estimation for mmWave Systems with Imperfect Antenna Arrays
Authors:
Mohammed E. Eltayeb
Abstract:
Compressed Sensing (CS) based channel estimation techniques have recently emerged as an effective way to acquire the channel of millimeter-wave (mmWave) systems with a small number of measurements. These techniques, however, are based on prior knowledge of transmit and receive array manifolds, and assume perfect antenna arrays at both the transmitter and the receiver. In the presence of antenna im…
▽ More
Compressed Sensing (CS) based channel estimation techniques have recently emerged as an effective way to acquire the channel of millimeter-wave (mmWave) systems with a small number of measurements. These techniques, however, are based on prior knowledge of transmit and receive array manifolds, and assume perfect antenna arrays at both the transmitter and the receiver. In the presence of antenna imperfections, the geometry and response of the arrays are modified. This distorts the CS measurement matrix and results in channel estimation errors. This paper studies the effects of both transmit and receive antenna imperfections on the mmWave channel estimate. A relay-aided solution which corrects for errors caused by faulty transmit arrays is then proposed. Simulation results demonstrate the effectiveness of the proposed solution and show that comparable channel estimates can be obtained when compared to systems with perfect antennas without the need for additional training overhead.
△ Less
Submitted 1 June, 2019;
originally announced June 2019.
-
On the Feedback Reduction of Relay Aided Multiuser Networks using Compressive Sensing
Authors:
Khalil M. Elkhalil,
Mohammed E. Eltayeb,
Abla Kammoun,
Tareq Y. Al-Naffouri,
Hamid Reza Bahrami
Abstract:
In this paper, we propose a feedback reduction scheme for full-duplex relay-aided multiuser networks. The proposed scheme permits the base station (BS) to obtain channel state information (CSI) from a subset of strong users under substantially reduced feedback overhead. More specifically, we cast the problem of user identification and CSI estimation as a block sparse signal recovery problem in com…
▽ More
In this paper, we propose a feedback reduction scheme for full-duplex relay-aided multiuser networks. The proposed scheme permits the base station (BS) to obtain channel state information (CSI) from a subset of strong users under substantially reduced feedback overhead. More specifically, we cast the problem of user identification and CSI estimation as a block sparse signal recovery problem in compressive sensing (CS). Using existing CS block recovery algorithms, we first obtain the identity of the strong users and then estimate their CSI using the best linear unbiased estimator (BLUE). To minimize the effect of noise on the estimated CSI, we introduce a back-off strategy that optimally backs-off on the noisy estimated CSI and derive the error covariance matrix of the post-detection noise. In addition to this, we provide exact closed form expressions for the average maximum equivalent SNR at the destination user. Numerical results show that the proposed algorithm drastically reduces the feedback air-time and achieves a rate close to that obtained by scheduling schemes that require dedicated error-free feedback from all the network users.
△ Less
Submitted 4 May, 2015;
originally announced May 2015.