-
A Network for structural dense displacement based on 3D deformable mesh model and optical flow
Authors:
Peimian Du,
Qicheng Guo,
Yanru Li
Abstract:
This study proposes a Network to recognize displacement of a RC frame structure from a video by a monocular camera. The proposed Network consists of two modules which is FlowNet2 and POFRN-Net. FlowNet2 is used to generate dense optical flow as well as POFRN-Net is to extract pose parameter H. FlowNet2 convert two video frames into dense optical flow. POFRN-Net is inputted dense optical flow from…
▽ More
This study proposes a Network to recognize displacement of a RC frame structure from a video by a monocular camera. The proposed Network consists of two modules which is FlowNet2 and POFRN-Net. FlowNet2 is used to generate dense optical flow as well as POFRN-Net is to extract pose parameter H. FlowNet2 convert two video frames into dense optical flow. POFRN-Net is inputted dense optical flow from FlowNet2 to output the pose parameter H. The displacement of any points of structure can be calculated from parameter H. The Fast Fourier Transform (FFT) is applied to obtain frequency domain signal from corresponding displacement signal. Furthermore, the comparison of the truth displacement on the First floor of the First video is shown in this study. Finally, the predicted displacements on four floors of RC frame structure of given three videos are exhibited in the last of this study.
△ Less
Submitted 9 February, 2024;
originally announced February 2024.
-
Joint Port Selection Based Channel Acquisition for FDD Cell-Free Massive MIMO
Authors:
Cheng Zhang,
Pengguang Du,
Minjie Ding,
Yindi **g,
Yongming Huang
Abstract:
In frequency division duplexing (FDD) cell-free massive MIMO, the acquisition of the channel state information (CSI) is very challenging because of the large overhead required for the training and feedback of the downlink channels of multiple cooperating base stations (BSs). In this paper, for systems with partial uplink-downlink channel reciprocity, and a general spatial domain channel model with…
▽ More
In frequency division duplexing (FDD) cell-free massive MIMO, the acquisition of the channel state information (CSI) is very challenging because of the large overhead required for the training and feedback of the downlink channels of multiple cooperating base stations (BSs). In this paper, for systems with partial uplink-downlink channel reciprocity, and a general spatial domain channel model with variations in the average port power and correlation among port coefficients, we propose a joint-port-selection-based CSI acquisition and feedback scheme for the downlink transmission with zero-forcing precoding. The scheme uses an eigenvalue-decomposition-based transformation to reduce the feedback overhead by exploring the port correlation. We derive the sum-rate of the system for any port selection. Based on the sum-rate result, we propose a low-complexity greedy-search-based joint port selection (GS-JPS) algorithm. Moreover, to adapt to fast time-varying scenarios, a supervised deep learning-enhanced joint port selection (DL-JPS) algorithm is proposed. Simulations verify the effectiveness of our proposed schemes and their advantage over existing port-selection channel acquisition schemes.
△ Less
Submitted 12 January, 2024; v1 submitted 20 July, 2023;
originally announced July 2023.
-
Adaptive Failure Search Using Critical States from Domain Experts
Authors:
Peter Du,
Katherine Driggs-Campbell
Abstract:
Uncovering potential failure cases is a crucial step in the validation of safety critical systems such as autonomous vehicles. Failure search may be done through logging substantial vehicle miles in either simulation or real world testing. Due to the sparsity of failure events, naive random search approaches require significant amounts of vehicle operation hours to find potential system weaknesses…
▽ More
Uncovering potential failure cases is a crucial step in the validation of safety critical systems such as autonomous vehicles. Failure search may be done through logging substantial vehicle miles in either simulation or real world testing. Due to the sparsity of failure events, naive random search approaches require significant amounts of vehicle operation hours to find potential system weaknesses. As a result, adaptive searching techniques have been proposed to efficiently explore and uncover failure trajectories of an autonomous policy in simulation. Adaptive Stress Testing (AST) is one such method that poses the problem of failure search as a Markov decision process and uses reinforcement learning techniques to find high probability failures. However, this formulation requires a probability model for the actions of all agents in the environment. In systems where the environment actions are discrete and dependencies among agents exist, it may be infeasible to fully characterize the distribution or find a suitable proxy. This work proposes the use of a data driven approach to learn a suitable classifier that tries to model how humans identify {critical states and use this to guide failure search in AST. We show that the incorporation of critical states into the AST framework generates failure scenarios with increased safety violations in an autonomous driving policy with a discrete action space.
△ Less
Submitted 1 April, 2023;
originally announced April 2023.
-
High Resolution Modeling and Analysis of Cryptocurrency Mining's Impact on Power Grids: Carbon Footprint, Reliability, and Electricity Price
Authors:
Ali Menati,
Xiangtian Zheng,
Kiyeob Lee,
Ranyu Shi,
Pengwei Du,
Chanan Singh,
Le Xie
Abstract:
Blockchain technologies are considered one of the most disruptive innovations of the last decade, enabling secure decentralized trust-building. However, in recent years, with the rapid increase in the energy consumption of blockchain-based computations for cryptocurrency mining, there have been growing concerns about their sustainable operation in electric grids. This paper investigates the tri-fa…
▽ More
Blockchain technologies are considered one of the most disruptive innovations of the last decade, enabling secure decentralized trust-building. However, in recent years, with the rapid increase in the energy consumption of blockchain-based computations for cryptocurrency mining, there have been growing concerns about their sustainable operation in electric grids. This paper investigates the tri-factor impact of such large loads on carbon footprint, grid reliability, and electricity market price in the Texas grid. We release open-source high-resolution data to enable high-resolution modeling of influencing factors such as location and flexibility. We reveal that the per-megawatt-hour carbon footprint of cryptocurrency mining loads across locations can vary by as much as 50% of the crude system average estimate. We show that the flexibility of mining loads can significantly mitigate power shortages and market disruptions that can result from the deployment of mining loads. These findings suggest policymakers to facilitate the participation of large mining facilities in wholesale markets and require them to provide mandatory demand response.
△ Less
Submitted 14 April, 2023; v1 submitted 29 December, 2022;
originally announced December 2022.
-
Deep learning-based surrogate model for 3-D patient-specific computational fluid dynamics
Authors:
Pan Du,
Xiaozhi Zhu,
Jian-Xun Wang
Abstract:
Optimization and uncertainty quantification have been playing an increasingly important role in computational hemodynamics. However, existing methods based on principled modeling and classic numerical techniques have faced significant challenges, particularly when it comes to complex 3D patient-specific shapes in the real world. First, it is notoriously challenging to parameterize the input space…
▽ More
Optimization and uncertainty quantification have been playing an increasingly important role in computational hemodynamics. However, existing methods based on principled modeling and classic numerical techniques have faced significant challenges, particularly when it comes to complex 3D patient-specific shapes in the real world. First, it is notoriously challenging to parameterize the input space of arbitrarily complex 3-D geometries. Second, the process often involves massive forward simulations, which are extremely computationally demanding or even infeasible. We propose a novel deep learning surrogate modeling solution to address these challenges and enable rapid hemodynamic predictions. Specifically, a statistical generative model for 3-D patient-specific shapes is developed based on a small set of baseline patient-specific geometries. An unsupervised shape correspondence solution is used to enable geometric morphing and scalable shape synthesis statistically. Moreover, a simulation routine is developed for automatic data generation by automatic meshing, boundary setting, simulation, and post-processing. An efficient supervised learning solution is proposed to map the geometric inputs to the hemodynamics predictions in latent spaces. Numerical studies on aortic flows are conducted to demonstrate the effectiveness and merit of the proposed techniques.
△ Less
Submitted 11 April, 2022;
originally announced April 2022.
-
An improved bearing fault detection strategy based on artificial bee colony algorithm
Authors:
Haiquan Wang,
Wenxuan Yue,
Shengjun Wen,
Xiaobin Xu,
Menghao Su,
Shanshan Zhang,
Panpan Du
Abstract:
The operating state of bearing directly affects the performance of rotating machinery and how to accurately and decisively extract features from the original vibration signal and recognize the faulty parts as early as possible is very critical. In this study, the one-dimensional ternary model which has been proved to be an effective statistical method in feature selection is introduced and shapele…
▽ More
The operating state of bearing directly affects the performance of rotating machinery and how to accurately and decisively extract features from the original vibration signal and recognize the faulty parts as early as possible is very critical. In this study, the one-dimensional ternary model which has been proved to be an effective statistical method in feature selection is introduced and shapelets transformation is proposed to calculate the parameter of it which is also the standard deviation of the transformed shaplets that is usually selected by trial and error. Moreover, XGBoost is used to recognize the faults from the obtained features, and an improved artificial bee colony algorithm(ABC) where the evolution is guided by the importance indices of different search space is proposed to optimize the parameters of XGBoost. Here the value of importance index is related to the probability of optimal solutions in certain space, thus the problem of easily falling into local optimality in traditional ABC could be avoided.The experimental results based on the failure vibration signal samples show that the average accuracy of fault signal recognition can reach 97% which is much higher than the ones corresponding to other extraction strategies, thus the ability of extraction could be improved. And with the improved artificial bee colony algorithm which is used to optimize the parameters of XGBoost, the classification accuracy could be improved from 97.02% to about 98.60% compared with the traditional classification strategy
△ Less
Submitted 2 December, 2021; v1 submitted 1 December, 2021;
originally announced December 2021.
-
Deep Learning-Aided OFDM-Based Generalized Optical Quadrature Spatial Modulation
Authors:
Chen Chen,
Lin Zeng,
Xin Zhong,
Shu Fu,
Min Liu,
Pengfei Du
Abstract:
In this paper, we propose an orthogonal frequency division multiplexing (OFDM)-based generalized optical quadrature spatial modulation (GOQSM) technique for multiple-input multiple-output optical wireless communication (MIMO-OWC) systems. Considering the error propagation and noise amplification effects when applying maximum likelihood and maximum ratio combining (ML-MRC)-based detection, we furth…
▽ More
In this paper, we propose an orthogonal frequency division multiplexing (OFDM)-based generalized optical quadrature spatial modulation (GOQSM) technique for multiple-input multiple-output optical wireless communication (MIMO-OWC) systems. Considering the error propagation and noise amplification effects when applying maximum likelihood and maximum ratio combining (ML-MRC)-based detection, we further propose a deep neural network (DNN)-aided detection for OFDM-based GOQSM systems. The proposed DNN-aided detection scheme performs the GOQSM detection in a joint manner, which can efficiently eliminate the adverse effects of both error propagation and noise amplification. The obtained simulation results successfully verify the superiority of the deep learning-aided OFDM-based GOQSM technique for high-speed MIMO-OWC systems.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Improving the Feasibility of Moment-Based Safety Analysis for Stochastic Dynamics
Authors:
Peter Du,
Katherine Driggs-Campbell,
Roy Dong
Abstract:
Given a stochastic dynamical system modelled via stochastic differential equations (SDEs), we evaluate the safety of the system through characterizations of its exit time moments. We lift the (possibly nonlinear) dynamics into the space of the occupation and exit measures to obtain a set of linear evolution equations which depend on the infinitesimal generator of the SDE. Coupled with appropriate…
▽ More
Given a stochastic dynamical system modelled via stochastic differential equations (SDEs), we evaluate the safety of the system through characterizations of its exit time moments. We lift the (possibly nonlinear) dynamics into the space of the occupation and exit measures to obtain a set of linear evolution equations which depend on the infinitesimal generator of the SDE. Coupled with appropriate semidefinite positive matrix constraints, this yields a moment-based approach for the computation of exit time moments of SDEs with polynomial drift and diffusion dynamics. However, the existing moment approach suffers from drawbacks which impede its applicability to the analysis of higher dimensional physical systems. To apply the existing approach, the dynamics of the systems are limited to polynomials of the state - excluding a large majority of real world examples. Computational scalability is also poor as the dimensionality of the state increases, largely due to the combinatorial growth of the optimization program. In this paper, we propose changes to the existing moment method to make feasible the safety analysis of higher dimensional physical systems. The restriction to polynomial dynamics is lifted by using a state augmentation method which allows one to generate the evolution equations for a broader class of nonlinear stochastic systems. We then reformulate the constraints of the optimization to mitigate the computational limitations associated with an increase in state dimensionality. We employ our methodology on two example processes to characterize their safety via expected exit times and demonstrate the ability to handle multi-dimensional physical systems that were previously unsupported by the existing SDP method of moments.
△ Less
Submitted 16 September, 2022; v1 submitted 10 April, 2021;
originally announced April 2021.
-
Deep learning to estimate the physical proportion of infected region of lung for COVID-19 pneumonia with CT image set
Authors:
Wei Wu,
Yu Shi,
Xukun Li,
Yukun Zhou,
Peng Du,
Shuangzhi Lv,
Tingbo Liang,
Jifang Sheng
Abstract:
Utilizing computed tomography (CT) images to quickly estimate the severity of cases with COVID-19 is one of the most straightforward and efficacious methods. Two tasks were studied in this present paper. One was to segment the mask of intact lung in case of pneumonia. Another was to generate the masks of regions infected by COVID-19. The masks of these two parts of images then were converted to co…
▽ More
Utilizing computed tomography (CT) images to quickly estimate the severity of cases with COVID-19 is one of the most straightforward and efficacious methods. Two tasks were studied in this present paper. One was to segment the mask of intact lung in case of pneumonia. Another was to generate the masks of regions infected by COVID-19. The masks of these two parts of images then were converted to corresponding volumes to calculate the physical proportion of infected region of lung. A total of 129 CT image set were herein collected and studied. The intrinsic Hounsfiled value of CT images was firstly utilized to generate the initial dirty version of labeled masks both for intact lung and infected regions. Then, the samples were carefully adjusted and improved by two professional radiologists to generate the final training set and test benchmark. Two deep learning models were evaluated: UNet and 2.5D UNet. For the segment of infected regions, a deep learning based classifier was followed to remove unrelated blur-edged regions that were wrongly segmented out such as air tube and blood vessel tissue etc. For the segmented masks of intact lung and infected regions, the best method could achieve 0.972 and 0.757 measure in mean Dice similarity coefficient on our test benchmark. As the overall proportion of infected region of lung, the final result showed 0.961 (Pearson's correlation coefficient) and 11.7% (mean absolute percent error). The instant proportion of infected regions of lung could be used as a visual evidence to assist clinical physician to determine the severity of the case. Furthermore, a quantified report of infected regions can help predict the prognosis for COVID-19 cases which were scanned periodically within the treatment cycle.
△ Less
Submitted 8 June, 2020;
originally announced June 2020.
-
Deep Learning System to Screen Coronavirus Disease 2019 Pneumonia
Authors:
Xiaowei Xu,
Xiangao Jiang,
Chunlian Ma,
Peng Du,
Xukun Li,
Shuangzhi Lv,
Liang Yu,
Yanfei Chen,
Junwei Su,
Guan**g Lang,
Yongtao Li,
Hong Zhao,
Kai** Xu,
Lingxiang Ruan,
Wei Wu
Abstract:
We found that the real time reverse transcription-polymerase chain reaction (RT-PCR) detection of viral RNA from sputum or nasopharyngeal swab has a relatively low positive rate in the early stage to determine COVID-19 (named by the World Health Organization). The manifestations of computed tomography (CT) imaging of COVID-19 had their own characteristics, which are different from other types of v…
▽ More
We found that the real time reverse transcription-polymerase chain reaction (RT-PCR) detection of viral RNA from sputum or nasopharyngeal swab has a relatively low positive rate in the early stage to determine COVID-19 (named by the World Health Organization). The manifestations of computed tomography (CT) imaging of COVID-19 had their own characteristics, which are different from other types of viral pneumonia, such as Influenza-A viral pneumonia. Therefore, clinical doctors call for another early diagnostic criteria for this new type of pneumonia as soon as possible.This study aimed to establish an early screening model to distinguish COVID-19 pneumonia from Influenza-A viral pneumonia and healthy cases with pulmonary CT images using deep learning techniques. The candidate infection regions were first segmented out using a 3-dimensional deep learning model from pulmonary CT image set. These separated images were then categorized into COVID-19, Influenza-A viral pneumonia and irrelevant to infection groups, together with the corresponding confidence scores using a location-attention classification model. Finally the infection type and total confidence score of this CT case were calculated with Noisy-or Bayesian function.The experiments result of benchmark dataset showed that the overall accuracy was 86.7 % from the perspective of CT cases as a whole.The deep learning models established in this study were effective for the early screening of COVID-19 patients and demonstrated to be a promising supplementary diagnostic method for frontline clinical doctors.
△ Less
Submitted 21 February, 2020;
originally announced February 2020.
-
Online monitoring for safe pedestrian-vehicle interactions
Authors:
Peter Du,
Zhe Huang,
Tianqi Liu,
Ke Xu,
Qichao Gao,
Hussein Sibai,
Katherine Driggs-Campbell,
Sayan Mitra
Abstract:
As autonomous systems begin to operate amongst humans, methods for safe interaction must be investigated. We consider an example of a small autonomous vehicle in a pedestrian zone that must safely maneuver around people in a free-form fashion. We investigate two key questions: How can we effectively integrate pedestrian intent estimation into our autonomous stack. Can we develop an online monitori…
▽ More
As autonomous systems begin to operate amongst humans, methods for safe interaction must be investigated. We consider an example of a small autonomous vehicle in a pedestrian zone that must safely maneuver around people in a free-form fashion. We investigate two key questions: How can we effectively integrate pedestrian intent estimation into our autonomous stack. Can we develop an online monitoring framework to give formal guarantees on the safety of such human-robot interactions. We present a pedestrian intent estimation framework that can accurately predict future pedestrian trajectories given multiple possible goal locations. We integrate this into a reachability-based online monitoring scheme that formally assesses the safety of these interactions with nearly real-time performance (approximately 0.3 seconds). These techniques are integrated on a test vehicle with a complete in-house autonomous stack, demonstrating effective and safe interaction in real-world experiments.
△ Less
Submitted 17 July, 2020; v1 submitted 12 October, 2019;
originally announced October 2019.
-
A Deep Learning System That Generates Quantitative CT Reports for Diagnosing Pulmonary Tuberculosis
Authors:
Wei Wu,
Xukun Li,
Peng Du,
Guan**g Lang,
Min Xu,
Kai** Xu,
Lanjuan Li
Abstract:
We developed a deep learning model-based system to automatically generate a quantitative Computed Tomography (CT) diagnostic report for Pulmonary Tuberculosis (PTB) cases.501 CT imaging datasets from 223 patients with active PTB were collected, and another 501 cases from a healthy population served as negative samples.2884 lesions of PTB were carefully labeled and classified manually by profession…
▽ More
We developed a deep learning model-based system to automatically generate a quantitative Computed Tomography (CT) diagnostic report for Pulmonary Tuberculosis (PTB) cases.501 CT imaging datasets from 223 patients with active PTB were collected, and another 501 cases from a healthy population served as negative samples.2884 lesions of PTB were carefully labeled and classified manually by professional radiologists.Three state-of-the-art 3D convolution neural network (CNN) models were trained and evaluated in the inspection of PTB CT images. Transfer learning method was also utilized during this process. The best model was selected to annotate the spatial location of lesions and classify them into miliary, infiltrative, caseous, tuberculoma and cavitary types simultaneously.Then the Noisy-Or Bayesian function was used to generate an overall infection probability.Finally, a quantitative diagnostic report was exported.The results showed that the recall and precision rates, from the perspective of a single lesion region of PTB, were 85.9% and 89.2% respectively. The overall recall and precision rates,from the perspective of one PTB case, were 98.7% and 93.7%, respectively. Moreover, the precision rate of the PTB lesion type classification was 90.9%.The new method might serve as an effective reference for decision making by clinical doctors.
△ Less
Submitted 5 October, 2019;
originally announced October 2019.
-
Adaptive Stress Testing with Reward Augmentation for Autonomous Vehicle Validation
Authors:
Anthony Corso,
Peter Du,
Katherine Driggs-Campbell,
Mykel J. Kochenderfer
Abstract:
Determining possible failure scenarios is a critical step in the evaluation of autonomous vehicle systems. Real-world vehicle testing is commonly employed for autonomous vehicle validation, but the costs and time requirements are high. Consequently, simulation-driven methods such as Adaptive Stress Testing (AST) have been proposed to aid in validation. AST formulates the problem of finding the mos…
▽ More
Determining possible failure scenarios is a critical step in the evaluation of autonomous vehicle systems. Real-world vehicle testing is commonly employed for autonomous vehicle validation, but the costs and time requirements are high. Consequently, simulation-driven methods such as Adaptive Stress Testing (AST) have been proposed to aid in validation. AST formulates the problem of finding the most likely failure scenarios as a Markov decision process, which can be solved using reinforcement learning. In practice, AST tends to find scenarios where failure is unavoidable and tends to repeatedly discover the same types of failures of a system. This work addresses these issues by encoding domain relevant information into the search procedure. With this modification, the AST method discovers a larger and more expressive subset of the failure space when compared to the original AST formulation. We show that our approach is able to identify useful failure scenarios of an autonomous vehicle policy.
△ Less
Submitted 6 August, 2019; v1 submitted 2 August, 2019;
originally announced August 2019.
-
A novel hybrid model based on multi-objective Harris hawks optimization algorithm for daily PM2.5 and PM10 forecasting
Authors:
Pei Du,
Jianzhou Wang,
Yan Hao,
Tong Niu,
Wendong Yang
Abstract:
High levels of air pollution may seriously affect people's living environment and even endanger their lives. In order to reduce air pollution concentrations, and warn the public before the occurrence of hazardous air pollutants, it is urgent to design an accurate and reliable air pollutant forecasting model. However, most previous research have many deficiencies, such as ignoring the importance of…
▽ More
High levels of air pollution may seriously affect people's living environment and even endanger their lives. In order to reduce air pollution concentrations, and warn the public before the occurrence of hazardous air pollutants, it is urgent to design an accurate and reliable air pollutant forecasting model. However, most previous research have many deficiencies, such as ignoring the importance of predictive stability, and poor initial parameters and so on, which have significantly effect on the performance of air pollution prediction. Therefore, to address these issues, a novel hybrid model is proposed in this study. Specifically, a powerful data preprocessing techniques is applied to decompose the original time series into different modes from low- frequency to high- frequency. Next, a new multi-objective algorithm called MOHHO is first developed in this study, which are introduced to tune the parameters of ELM model with high forecasting accuracy and stability for air pollution series prediction, simultaneously. And the optimized ELM model is used to perform the time series prediction. Finally, a scientific and robust evaluation system including several error criteria, benchmark models, and several experiments using six air pollutant concentrations time series from three cities in China is designed to perform a compressive assessment for the presented hybrid forecasting model. Experimental results indicate that the proposed hybrid model can guarantee a more stable and higher predictive performance compared to others, whose superior prediction ability may help to develop effective plans for air pollutant emissions and prevent health problems caused by air pollution.
△ Less
Submitted 30 May, 2019;
originally announced May 2019.