-
Efficient UAV Hovering, Resource Allocation, and Trajectory Design for ISAC with Limited Backhaul Capacity
Authors:
Ata Khalili,
Atefeh Rezaei,
Dongfang Xu,
Falko Dressler,
Robert Schober
Abstract:
In this paper, we investigate the joint resource allocation and trajectory design for a multi-user, multi-target unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC) system, where the link capacity between a ground base station (BS) and the UAV is limited. The UAV conducts target sensing and information transmission in orthogonal time slots to prevent interference. As…
▽ More
In this paper, we investigate the joint resource allocation and trajectory design for a multi-user, multi-target unmanned aerial vehicle (UAV)-enabled integrated sensing and communication (ISAC) system, where the link capacity between a ground base station (BS) and the UAV is limited. The UAV conducts target sensing and information transmission in orthogonal time slots to prevent interference. As is common in practical systems, sensing is performed while the UAV hovers, allowing the UAV to acquire high-quality sensing data. Subsequently, the acquired sensing data is offloaded to the ground BS for further processing. We jointly optimize the UAV trajectory, UAV velocity, beamforming for the communication users, power allocated to the sensing beam, and time of hovering for sensing to minimize the power consumption of the UAV while ensuring the communication quality of service (QoS) and successful sensing. Due to the prohibitively high complexity of the resulting non-convex mixed integer non-linear program (MINLP), we employ a series of transformations and optimization techniques, including semidefinite relaxation, big-M method, penalty approach, and successive convex approximation, to obtain a low-complexity suboptimal solution. Our simulation results reveal that 1) the proposed design achieves significant power savings compared to two baseline schemes; 2) stricter sensing requirements lead to longer sensing times, highlighting the challenge of efficiently managing both sensing accuracy and sensing time; 3) the optimized trajectory design ensures precise hovering directly above the targets during sensing, enhancing sensing quality and enabling the application of energy-focused beams; and 4) the proposed trajectory design balances the capacity of the backhaul link and the downlink rate of the communication users.
△ Less
Submitted 30 April, 2024;
originally announced June 2024.
-
Empowering the 6G Cellular Architecture with Open RAN
Authors:
Michele Polese,
Mischa Dohler,
Falko Dressler,
Melike Erol-Kantarci,
Rittwik Jana,
Raymond Knopp,
Tommaso Melodia
Abstract:
Innovation and standardization in 5G have brought advancements to every facet of the cellular architecture. This ranges from the introduction of new frequency bands and signaling technologies for the radio access network (RAN), to a core network underpinned by micro-services and network function virtualization (NFV). However, like any emerging technology, the pace of real-world deployments does no…
▽ More
Innovation and standardization in 5G have brought advancements to every facet of the cellular architecture. This ranges from the introduction of new frequency bands and signaling technologies for the radio access network (RAN), to a core network underpinned by micro-services and network function virtualization (NFV). However, like any emerging technology, the pace of real-world deployments does not instantly match the pace of innovation. To address this discrepancy, one of the key aspects under continuous development is the RAN with the aim of making it more open, adaptive, functional, and easy to manage. In this paper, we highlight the transformative potential of embracing novel cellular architectures by transitioning from conventional systems to the progressive principles of Open RAN. This promises to make 6G networks more agile, cost-effective, energy-efficient, and resilient. It opens up a plethora of novel use cases, ranging from ubiquitous support for autonomous devices to cost-effective expansions in regions previously underserved. The principles of Open RAN encompass: (i) a disaggregated architecture with modular and standardized interfaces; (ii) cloudification, programmability and orchestration; and (iii) AI-enabled data-centric closed-loop control and automation. We first discuss the transformative role Open RAN principles have played in the 5G era. Then, we adopt a system-level approach and describe how these Open RAN principles will support 6G RAN and architecture innovation. We qualitatively discuss potential performance gains that Open RAN principles yield for specific 6G use cases. For each principle, we outline the steps that research, development and standardization communities ought to take to make Open RAN principles central to next-generation cellular network designs.
△ Less
Submitted 5 December, 2023;
originally announced December 2023.
-
Resource Allocation for UAV-Assisted Industrial IoT User with Finite Blocklength
Authors:
Atefeh Rezaei,
Ata Khalili,
Falko Dressler
Abstract:
We consider a relay system empowered by an unmanned aerial vehicle (UAV) that facilitates downlink information delivery while adhering to finite blocklength requirements. The setup involves a remote controller transmitting information to both a UAV and an industrial Internet of Things (IIoT) or remote device, employing the non-orthogonal multiple access (NOMA) technique in the first phase. Subsequ…
▽ More
We consider a relay system empowered by an unmanned aerial vehicle (UAV) that facilitates downlink information delivery while adhering to finite blocklength requirements. The setup involves a remote controller transmitting information to both a UAV and an industrial Internet of Things (IIoT) or remote device, employing the non-orthogonal multiple access (NOMA) technique in the first phase. Subsequently, the UAV decodes and forwards this information to the remote device in the second phase. Our primary objective is to minimize the decoding error probability (DEP) at the remote device, which is influenced by the DEP at the UAV. To achieve this goal, we optimize the blocklength, transmission power, and location of the UAV. However, the underlying problem is highly non-convex and generally intractable to be solved directly. To overcome this challenge, we adopt an alternative optimization (AO) approach and decompose the original problem into three sub-problems. This approach leads to a sub-optimal solution, which effectively mitigates the non-convexity issue. In our simulations, we compare the performance of our proposed algorithm with baseline schemes. The results reveal that the proposed framework outperforms the baseline schemes, demonstrating its superiority in achieving lower DEP at the remote device. Furthermore, the simulation results illustrate the rapid convergence of our proposed algorithm, indicating its efficiency and effectiveness in solving the optimization problem.
△ Less
Submitted 24 October, 2023;
originally announced October 2023.
-
Where to Decide? Centralized vs. Distributed Vehicle Assignment for Platoon Formation
Authors:
Julian Heinovski,
Falko Dressler
Abstract:
Platooning is a promising cooperative driving application for future intelligent transportation systems. In order to assign vehicles to platoons, some algorithm for platoon formation is required. Such vehicle-to-platoon assignments have to be computed on-demand, e.g., when vehicles join or leave the freeways. In order to get best results from platooning, individual properties of involved vehicles…
▽ More
Platooning is a promising cooperative driving application for future intelligent transportation systems. In order to assign vehicles to platoons, some algorithm for platoon formation is required. Such vehicle-to-platoon assignments have to be computed on-demand, e.g., when vehicles join or leave the freeways. In order to get best results from platooning, individual properties of involved vehicles have to be considered during the assignment computation. In this paper, we explore the computation of vehicle-to-platoon assignments as an optimization problem based on similarity between vehicles. We define the similarity and, vice versa, the deviation among vehicles based on the desired driving speed of vehicles and their position on the road. We create three approaches to solve this assignment problem: centralized solver, centralized greedy, and distributed greedy, using a Mixed Integer Programming (MIP) solver and greedy heuristics, respectively.Conceptually, the approaches differ in both knowledge about vehicles as well as methodology. We perform a large-scale simulation study using PlaFoSim to compare all approaches. While the distributed greedy approach seems to have disadvantages due to the limited local knowledge, it performs as good as the centralized solver approach across most metrics. Both outperform the centralized greedy approach, which suffers from synchronization and greedy selection effects. The centralized solver approach however assumes global knowledge and requires a complex MIP solver to compute vehicle-to-platoon assignments. Overall, the distributed greedy approach achieves close to optimal results but requires the least assumptions and complexity.Therefore, we consider the distributed greedy approach the best approach among all presented approaches.
△ Less
Submitted 17 March, 2024; v1 submitted 14 October, 2023;
originally announced October 2023.
-
Insights from the Design Space Exploration of Flow-Guided Nanoscale Localization
Authors:
Filip Lemic,
Gerard Calvo Bartra,
Arnau Brosa López,
Jorge Torres Gómez,
Jakob Struye,
Falko Dressler,
Sergi Abadal,
Xavier Costa Perez
Abstract:
Nanodevices with Terahertz (THz)-based wireless communication capabilities are providing a primer for flow-guided localization within the human bloodstreams. Such localization is allowing for assigning the locations of sensed events with the events themselves, providing benefits in precision medicine along the lines of early and precise diagnostics, and reduced costs and invasiveness. Flow-guided…
▽ More
Nanodevices with Terahertz (THz)-based wireless communication capabilities are providing a primer for flow-guided localization within the human bloodstreams. Such localization is allowing for assigning the locations of sensed events with the events themselves, providing benefits in precision medicine along the lines of early and precise diagnostics, and reduced costs and invasiveness. Flow-guided localization is still in a rudimentary phase, with only a handful of works targeting the problem. Nonetheless, the performance assessments of the proposed solutions are already carried out in a non-standardized way, usually along a single performance metric, and ignoring various aspects that are relevant at such a scale (e.g., nanodevices' limited energy) and for such a challenging environment (e.g., extreme attenuation of in-body THz propagation). As such, these assessments feature low levels of realism and cannot be compared in an objective way. Toward addressing this issue, we account for the environmental and scale-related peculiarities of the scenario and assess the performance of two state-of-the-art flow-guided localization approaches along a set of heterogeneous performance metrics such as the accuracy and reliability of localization.
△ Less
Submitted 29 May, 2024; v1 submitted 29 May, 2023;
originally announced May 2023.
-
Achieving Realistic Cyclist Behavior in SUMO using the SimRa Dataset
Authors:
Ahmet-Serdar Karakaya,
Ioan-Alexandru Stef,
Konstantin Köhler,
Julian Heinovski,
Falko Dressler
Abstract:
Increasing the modal share of bicycle traffic to reduce carbon emissions, reduce urban car traffic, and to improve the health of citizens, requires a shift away from car-centric city planning. For this, traffic planners often rely on simulation tools such as SUMO which allow them to study the effects of construction changes before implementing them. Similarly, studies of vulnerable road users, her…
▽ More
Increasing the modal share of bicycle traffic to reduce carbon emissions, reduce urban car traffic, and to improve the health of citizens, requires a shift away from car-centric city planning. For this, traffic planners often rely on simulation tools such as SUMO which allow them to study the effects of construction changes before implementing them. Similarly, studies of vulnerable road users, here cyclists, also use such models to assess the performance of communication-based road traffic safety systems. The cyclist model in SUMO, however, is very imprecise as SUMO cyclists behave either like slow cars or fast pedestrians, thus, casting doubt on simulation results for bicycle traffic. In this paper, we analyze acceleration, deceleration, velocity, and intersection left-turn behavior of cyclists in a large dataset of real world cycle tracks. We use the results to improve the existing cyclist model in SUMO and add three more detailed cyclist models and implement them in SUMO.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
A Computational Approach for the Characterization of Airborne Pathogen Transmission in Turbulent Molecular Communication Channels
Authors:
Fatih Gulec,
Falko Dressler,
Andrew W. Eckford
Abstract:
Airborne pathogen transmission mechanisms play a key role in the spread of infectious diseases such as COVID-19. In this work, we propose a computational fluid dynamics (CFD) approach to model and statistically characterize airborne pathogen transmission via pathogen-laden particles in turbulent channels from a molecular communication viewpoint. To this end, turbulent flows induced by coughing and…
▽ More
Airborne pathogen transmission mechanisms play a key role in the spread of infectious diseases such as COVID-19. In this work, we propose a computational fluid dynamics (CFD) approach to model and statistically characterize airborne pathogen transmission via pathogen-laden particles in turbulent channels from a molecular communication viewpoint. To this end, turbulent flows induced by coughing and the turbulent dispersion of droplets and aerosols are modeled by using the Reynolds-averaged Navier-Stokes equations coupled with the realizable $k-ε$ model and the discrete random walk model, respectively. Via simulations realized by a CFD simulator, statistical data for the number of received particles are obtained. These data are post-processed to obtain the statistical characterization of the turbulent effect in the reception and to derive the probability of infection. Our results reveal that the turbulence has an irregular effect on the probability of infection, which shows itself by the multi-modal distribution as a weighted sum of normal and Weibull distributions. Furthermore, it is shown that the turbulent MC channel is characterized via multi-modal, i.e., sum of weighted normal distributions, or stable distributions, depending on the air velocity.
△ Less
Submitted 2 May, 2023;
originally announced May 2023.
-
Focusing on Information Context for ITS using a Spatial Age of Information Model
Authors:
Julian Heinovski,
Jorge Torres Gómez,
Falko Dressler
Abstract:
New technologies for sensing and communication act as enablers for cooperative driving applications. Sensors are able to detect objects in the surrounding environment and information such as their current location is exchanged among vehicles. In order to cope with the vehicles' mobility, such information is required to be as fresh as possible for proper operation of cooperative driving application…
▽ More
New technologies for sensing and communication act as enablers for cooperative driving applications. Sensors are able to detect objects in the surrounding environment and information such as their current location is exchanged among vehicles. In order to cope with the vehicles' mobility, such information is required to be as fresh as possible for proper operation of cooperative driving applications. The age of information (AoI) has been proposed as a metric for evaluating freshness of information; recently also within the context of intelligent transportation systems (ITS). We investigate mechanisms to reduce the AoI of data transported in form of beacon messages while controlling their emission rate. We aim to balance packet collision probability and beacon frequency using the average peak age of information (PAoI) as a metric. This metric, however, only accounts for the generation time of the data but not for application-specific aspects, such as the location of the transmitting vehicle. We thus propose a new way of interpreting the AoI by considering information context, thereby incorporating vehicles' locations. As an example, we characterize such importance using the orientation and the distance of the involved vehicles. In particular, we introduce a weighting coefficient used in combination with the PAoI to evaluate the information freshness, thus emphasizing on information from more important neighbors. We further design the beaconing approach in a way to meet a given AoI requirement, thus, saving resources on the wireless channel while kee** the AoI minimal. We illustrate the effectiveness of our approach in Manhattan-like urban scenarios, reaching pre-specified targets for the AoI of beacon messages.
△ Less
Submitted 16 June, 2023; v1 submitted 25 April, 2023;
originally announced April 2023.
-
Toward Standardized Performance Evaluation of Flow-guided Nanoscale Localization
Authors:
Arnau Brosa López,
Filip Lemic,
Jakob Struye,
Jorge Torres Gómez,
Esteban Municio,
Carmen Delgado,
Gerard Calvo Bartra,
Falko Dressler,
Eduard Alarcón,
Jeroen Famaey,
Sergi Abadal,
Xavier Costa Pérez
Abstract:
Nanoscale devices with Terahertz (THz) communication capabilities are envisioned to be deployed within human bloodstreams. Such devices will enable fine-grained sensing-based applications for detecting early indications (i.e., biomarkers) of various health conditions, as well as actuation-based ones such as targeted drug delivery. Associating the locations of such events with the events themselves…
▽ More
Nanoscale devices with Terahertz (THz) communication capabilities are envisioned to be deployed within human bloodstreams. Such devices will enable fine-grained sensing-based applications for detecting early indications (i.e., biomarkers) of various health conditions, as well as actuation-based ones such as targeted drug delivery. Associating the locations of such events with the events themselves would provide an additional utility for precision diagnostics and treatment. This vision yielded a new class of in-body localization coined under the term "flow-guided nanoscale localization". Such localization can be piggybacked on THz communication for detecting body regions in which biological events were observed based on the duration of one circulation of a nanodevice in the bloodstream. From a decades-long research on objective benchmarking of "traditional" indoor localization, as well as its eventual standardization (e.g., ISO/IEC 18305:2016), we know that in early stages the reported performance results were often incomplete (e.g., targeting a subset of relevant performance metrics), carrying out benchmarking experiments in different evaluation environments and scenarios, and utilizing inconsistent performance indicators. To avoid such a "lock-in" in flow-guided localization, in this paper we propose a workflow for standardized performance evaluation of such localization. The workflow is implemented in the form of an open-source simulation framework that is able to jointly account for the mobility of the nanodevices, in-body THz communication between with on-body anchors, and energy-related and other technological constraints (e.g., pulse-based modulation) at the nanodevice level. Accounting for these constraints, the framework is able to generate the raw data that can be streamlined into different flow-guided localization solutions for generating standardized performance benchmarks.
△ Less
Submitted 7 March, 2024; v1 submitted 14 March, 2023;
originally announced March 2023.
-
Innovation-Based Remote State Estimation Secrecy with no Acknowledgments
Authors:
Justin M. Kennedy,
Jason J. Ford,
Daniel E. Quevedo,
Falko Dressler
Abstract:
Secrecy encoding for remote state estimation in the presence of adversarial eavesdroppers is a well studied problem. Typical existing secrecy encoding schemes rely on the transmitter's knowledge of the remote estimator's current performance. This performance measure is often shared via packet receipt acknowledgments. However, in practical situations the acknowledgment channel may be susceptible to…
▽ More
Secrecy encoding for remote state estimation in the presence of adversarial eavesdroppers is a well studied problem. Typical existing secrecy encoding schemes rely on the transmitter's knowledge of the remote estimator's current performance. This performance measure is often shared via packet receipt acknowledgments. However, in practical situations the acknowledgment channel may be susceptible to interference from an active adversary, resulting in the secrecy encoding scheme failing. Aiming to achieve a reliable state estimate for a legitimate estimator while ensuring secrecy, we propose a secrecy encoding scheme without the need for packet receipt acknowledgments. Our encoding scheme uses a pre-arranged scheduling sequence established at the transmitter and legitimate receiver. We transmit a packet containing either the state measurement or encoded information for the legitimate user. The encoding makes the packet appear to be the state but is designed to damage an eavesdropper's estimate. The pre-arranged scheduling sequence and encoding is chosen psuedo-random. We analyze the performance of our encoding scheme against a class of eavesdropper, and show conditions to force the eavesdropper to have an unbounded estimation performance. Further, we provide a numerical illustration and apply our encoding scheme to an application in power systems.
△ Less
Submitted 15 December, 2022;
originally announced December 2022.
-
Centralized Model-Predictive Control with Human-Driver Interaction for Platooning
Authors:
Justin M. Kennedy,
Julian Heinovski,
Daniel E. Quevedo,
Falko Dressler
Abstract:
Cooperative adaptive cruise control presents an opportunity to improve road transportation through increase in road capacity and reduction in energy use and accidents. Clever design of control algorithms and communication systems is required to ensure that the vehicle platoon is stable and meets desired safety requirements. In this paper, we propose a centralized model predictive controller for a…
▽ More
Cooperative adaptive cruise control presents an opportunity to improve road transportation through increase in road capacity and reduction in energy use and accidents. Clever design of control algorithms and communication systems is required to ensure that the vehicle platoon is stable and meets desired safety requirements. In this paper, we propose a centralized model predictive controller for a heterogeneous platoon of vehicles to reach a desired platoon velocity and individual inter-vehicle distances with driver-selected headway time. As a novel concept, we allow for interruption from a human driver in the platoon that temporarily takes control of their vehicle with the assumption that the driver will, at minimum, obey legal velocity limits and the physical performance constraints of their vehicle. The finite horizon cost function of our proposed platoon controller is inspired from the infinite horizon design. To the best of our knowledge, this is the first platoon controller that integrates human-driven vehicles. We illustrate the performance of our proposed design with a numerical study, demonstrating that the safety distance, velocity, and actuation constraints are obeyed. Additionally, in simulation we illustrate a key property of string stability where the impact of a disturbance is reduced through the platoon.
△ Less
Submitted 18 May, 2023; v1 submitted 18 May, 2022;
originally announced May 2022.
-
A Realistic Cyclist Model for SUMO Based on the SimRa Dataset
Authors:
Ahmet-Serdar Karakaya,
Konstantin Köhler,
Julian Heinovski,
Falko Dressler,
David Bermbach
Abstract:
Increasing the modal share of bicycle traffic to reduce carbon emissions, reduce urban car traffic, and to improve the health of citizens, requires a shift away from car-centric city planning. For this, traffic planners often rely on simulation tools such as SUMO which allow them to study the effects of construction changes before implementing them. Similarly, studies of vulnerable road users, her…
▽ More
Increasing the modal share of bicycle traffic to reduce carbon emissions, reduce urban car traffic, and to improve the health of citizens, requires a shift away from car-centric city planning. For this, traffic planners often rely on simulation tools such as SUMO which allow them to study the effects of construction changes before implementing them. Similarly, studies of vulnerable road users, here cyclists, also use such models to assess the performance of communication-based road traffic safety systems. The cyclist model in SUMO, however, is very imprecise as SUMO cyclists behave either like slow cars or fast pedestrians, thus, casting doubt on simulation results for bicycle traffic. In this paper, we analyze acceleration, velocity, and intersection left-turn behavior of cyclists in a large dataset of real world cycle tracks. We use the results to derive an improved cyclist model and implement it in SUMO.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
Reducing Waiting Times at Charging Stations with Adaptive Electric Vehicle Route Planning
Authors:
Sven Schoenberg,
Falko Dressler
Abstract:
Electric vehicles are becoming more popular all over the world. With increasing battery capacities and a growing fast-charging infrastructure, they are becoming suitable for long distance travel. However, queues at charging stations could lead to long waiting times, making efficient route planning even more important. In general, optimal multi-objective route planning is extremely computationally…
▽ More
Electric vehicles are becoming more popular all over the world. With increasing battery capacities and a growing fast-charging infrastructure, they are becoming suitable for long distance travel. However, queues at charging stations could lead to long waiting times, making efficient route planning even more important. In general, optimal multi-objective route planning is extremely computationally expensive. We propose an adaptive charging and routing strategy, which considers driving, waiting, and charging time. For this, we developed a multi-criterion shortest-path search algorithm using contraction hierarchies. To further reduce the computational effort, we precompute shortest-path trees between the known locations of the charging stations. We propose a central charging station database (CSDB) that helps estimating waiting times at charging stations ahead of time. This enables our adaptive charging and routing strategy to reduce these waiting times. In an extensive set of simulation experiments, we demonstrate the advantages of our concept, which reduces average waiting times at charging stations by up to 97 %. Even if only a subset of the cars uses the CSDB approach, we can substantially reduce waiting times and thereby the total travel time of electric vehicles.
△ Less
Submitted 2 February, 2021;
originally announced February 2021.
-
Mobile Human Ad Hoc Networks: A Communication Engineering Viewpoint on Interhuman Airborne Pathogen Transmission
Authors:
Fatih Gulec,
Baris Atakan,
Falko Dressler
Abstract:
A number of transmission models for airborne pathogens transmission, as required to understand airborne infectious diseases such as COVID-19, have been proposed independently from each other, at different scales, and by researchers from various disciplines. We propose a communication engineering approach that blends different disciplines such as epidemiology, biology, medicine, and fluid dynamics.…
▽ More
A number of transmission models for airborne pathogens transmission, as required to understand airborne infectious diseases such as COVID-19, have been proposed independently from each other, at different scales, and by researchers from various disciplines. We propose a communication engineering approach that blends different disciplines such as epidemiology, biology, medicine, and fluid dynamics. The aim is to present a unified framework using communication engineering, and to highlight future research directions for modeling the spread of infectious diseases through airborne transmission. We introduce the concept of mobile human ad hoc networks (MoHANETs), which exploits the similarity of airborne transmission-driven human groups with mobile ad hoc networks and uses molecular communication as the enabling paradigm. In the MoHANET architecture, a layered structure is employed where the infectious human emitting pathogen-laden droplets and the exposed human to these droplets are considered as the transmitter and receiver, respectively. Our proof-of-concept results, which we validated using empirical COVID-19 data, clearly demonstrate the ability of our MoHANET architecture to predict the dynamics of infectious diseases by considering the propagation of pathogen-laden droplets, their reception and mobility of humans.
△ Less
Submitted 17 August, 2022; v1 submitted 2 November, 2020;
originally announced November 2020.
-
Infectious Disease Transmission via Aerosol Propagation from a Molecular Communication Perspective: Shannon Meets Coronavirus
Authors:
Max Schurwanz,
Peter Adam Hoeher,
Sunasheer Bhattacharjee,
Martin Damrath,
Lukas Stratmann,
Falko Dressler
Abstract:
Molecular communication is not only able to mimic biological and chemical communication mechanisms, but also provides a theoretical framework for viral infection processes. In this tutorial, aerosol and droplet transmission is modeled as a multiuser scenario with mobile nodes, related to broadcasting and relaying. In contrast to data communication systems, in the application of pathogen-laden aero…
▽ More
Molecular communication is not only able to mimic biological and chemical communication mechanisms, but also provides a theoretical framework for viral infection processes. In this tutorial, aerosol and droplet transmission is modeled as a multiuser scenario with mobile nodes, related to broadcasting and relaying. In contrast to data communication systems, in the application of pathogen-laden aerosol transmission, mutual information between nodes should be minimized. Towards this goal, several countermeasures are reasoned. The findings are supported by experimental results and by an advanced particle simulation tool. This work is inspired by the recent outbreak of the coronavirus (COVID-19) pandemic, but also applicable to other airborne infectious diseases like influenza.
△ Less
Submitted 3 February, 2021; v1 submitted 31 October, 2020;
originally announced November 2020.
-
Duality between Coronavirus Transmission and Air-based Macroscopic Molecular Communication
Authors:
Max Schurwanz,
Peter Adam Hoeher,
Sunasheer Bhattacharjee,
Martin Damrath,
Lukas Stratmann,
Falko Dressler
Abstract:
This contribution exploits the duality between a viral infection process and macroscopic air-based molecular communication. Airborne aerosol and droplet transmission through human respiratory processes is modeled as an instance of a multiuser molecular communication scenario employing respiratory-event-driven molecular variable-concentration shift keying. Modeling is aided by experiments that are…
▽ More
This contribution exploits the duality between a viral infection process and macroscopic air-based molecular communication. Airborne aerosol and droplet transmission through human respiratory processes is modeled as an instance of a multiuser molecular communication scenario employing respiratory-event-driven molecular variable-concentration shift keying. Modeling is aided by experiments that are motivated by a macroscopic air-based molecular communication testbed. In artificially induced coughs, a saturated aqueous solution containing a fluorescent dye mixed with saliva is released by an adult test person. The emitted particles are made visible by means of optical detection exploiting the fluorescent dye. The number of particles recorded is significantly higher in test series without mouth and nose protection than in those with a wellfitting medical mask. A simulation tool for macroscopic molecular communication processes is extended and used for estimating the transmission of infectious aerosols in different environments. Towards this goal, parameters obtained through self experiments are taken. The work is inspired by the recent outbreak of the coronavirus pandemic.
△ Less
Submitted 23 December, 2020; v1 submitted 10 September, 2020;
originally announced September 2020.
-
On Phase Offsets of 802.11ac Commodity WiFi
Authors:
Anatolij Zubow,
Piotr Gawlowicz,
Falko Dressler
Abstract:
We analyze the phase offsets between RF chains of modern IEEE 802.11ac chips. We investigate both the 2.4 and 5GHz bands on a per OFDM subcarrier level. Results reveal that the phase offset between receive antennas is due to random phase rotations semi-time-invariant with up to four possible values. Moreover, it is frequency-dependent. We propose a simple algorithm, which allows us to correct the…
▽ More
We analyze the phase offsets between RF chains of modern IEEE 802.11ac chips. We investigate both the 2.4 and 5GHz bands on a per OFDM subcarrier level. Results reveal that the phase offset between receive antennas is due to random phase rotations semi-time-invariant with up to four possible values. Moreover, it is frequency-dependent. We propose a simple algorithm, which allows us to correct the phase offset on the fly without any calibration. As proof-of-concept, we implemented Angle of Arrival (AoA) using MUSIC algorithm. To achieve higher accuracy we stitched the thirteen overlap** 20MHz channels available in 2.4GHz band together to effectively have a single 80MHz channel. Results show very good AoA precision although only two receive antennas were used.
△ Less
Submitted 7 May, 2020;
originally announced May 2020.
