-
Spatial Correlation Modeling and RS-LS Estimation of Near-Field Channels with Uniform Planar Arrays
Authors:
Özlem Tuğfe Demir,
Alva Kosasih,
Emil Björnson
Abstract:
Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is cr…
▽ More
Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is crucial for non-line-of-sight channel modeling. Unlike far-field scenarios, the spatial correlation properties of near-field channels have not been thoroughly investigated. In this paper, we start from the fundamentals and develop a near-field spatial correlation model for arbitrary spatial scattering functions. Furthermore, we derive the lower dimensional subspace where the channel vectors can exist. It is based on prior knowledge of the three-dimensional coverage region where scattering clusters exists and we derive a tractable one-dimensional integral expression. This subspace is subsequently employed in a reduced-subspace least squares (RS-LS) estimation method for near-field channels, thereby enhancing performance over the traditional least squares estimator without the need for having full spatial correlation matrix knowledge.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Energy Reduction in Cell-Free Massive MIMO through Fine-Grained Resource Management
Authors:
Özlem Tuğfe Demir,
Lianet Méndez-Monsanto,
Nicola Bastianello,
Emma Fitzgerald,
Gilles Callebaut
Abstract:
The physical layer foundations of cell-free massive MIMO (CF-mMIMO) have been well-established. As a next step, researchers are investigating practical and energy-efficient network implementations. This paper focuses on multiple sets of access points (APs) where user equipments (UEs) are served in each set, termed a federation, without inter-federation interference. The combination of federations…
▽ More
The physical layer foundations of cell-free massive MIMO (CF-mMIMO) have been well-established. As a next step, researchers are investigating practical and energy-efficient network implementations. This paper focuses on multiple sets of access points (APs) where user equipments (UEs) are served in each set, termed a federation, without inter-federation interference. The combination of federations and CF-mMIMO shows promise for highly-loaded scenarios. Our aim is to minimize the total energy consumption while adhering to UE downlink data rate constraints. The energy expenditure of the full system is modelled using a detailed hardware model of the APs. We jointly design the AP-UE association variables, determine active APs, and assign APs and UEs to federations. To solve this highly combinatorial problem, we develop a novel alternating optimization algorithm. Simulation results for an indoor factory demonstrate the advantages of considering multiple federations, particularly when facing large data rate requirements. Furthermore, we show that adopting a more distributed CF-mMIMO architecture is necessary to meet the data rate requirements. Conversely, if feasible, using a less distributed system with more antennas at each AP is more advantageous from an energy savings perspective.
△ Less
Submitted 11 May, 2024;
originally announced May 2024.
-
Destructive and constructive RIS beamforming in an ISAC-multi-user MIMO network
Authors:
Steven Rivetti,
Ozlem Tugfe Demir,
Emil Bjornson,
Mikael Skoglund
Abstract:
Integrated sensing and communication (ISAC) has already established itself as a promising solution to the spectrum scarcity problem, even more so when paired with a reconfigurable intelligent surface (RIS) as RISs can shape the propagation environment by adjusting their phase-shift coefficients. Albeit the potential performance gain, a RIS also poses a security threat to the system: in this paper,…
▽ More
Integrated sensing and communication (ISAC) has already established itself as a promising solution to the spectrum scarcity problem, even more so when paired with a reconfigurable intelligent surface (RIS) as RISs can shape the propagation environment by adjusting their phase-shift coefficients. Albeit the potential performance gain, a RIS also poses a security threat to the system: in this paper, we explore both sides of the RIS presence in a multi-user MIMO (multiple-input multiple-output) ISAC network. We first develop an alternating optimization algorithm, obtaining the active and passive beamforming vectors maximizing the sensing signal-to-noise ratio (SNR) under minimum signal-to-interference-plus-noise ratio (SINR) constraints for the communication users and finite power budget. We also investigate the destructive potential of RIS by devising a RIS phase-shift optimization algorithm that minimizes sensing SNR while preserving the same minimum communication SINR previously guaranteed by the system. We further investigate the impact of the RIS's individual element failures on the system performances. The simulation results show that the RIS performance-boosting potential is as good as its destructive one and that both of our optimization strategies show some resilience towards the investigated impairments.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Wideband Channel Capacity Maximization With Beyond Diagonal RIS Reflection Matrices
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Following the promising beamforming gains offered by reconfigurable intelligent surfaces (RISs), a new hardware architecture, known as \emph{beyond diagonal RIS (BD-RIS)}, has recently been proposed. This architecture enables controllable signal flows between the RIS elements, thereby providing greater design flexibility. However, the physics-imposed symmetry and orthogonality conditions on the no…
▽ More
Following the promising beamforming gains offered by reconfigurable intelligent surfaces (RISs), a new hardware architecture, known as \emph{beyond diagonal RIS (BD-RIS)}, has recently been proposed. This architecture enables controllable signal flows between the RIS elements, thereby providing greater design flexibility. However, the physics-imposed symmetry and orthogonality conditions on the non-diagonal reflection matrix make the design challenging. In this letter, we analyze how a BD-RIS can improve a wideband channel, starting from fundamental principles and deriving the capacity. Our analysis considers the effects of various channel taps and their frequency-domain characteristics. We introduce a new algorithm designed to optimize the configuration of the BD-RIS to maximize wideband capacity. The proposed algorithm has better performance than the benchmarks. A BD-RIS is beneficial compared to a conventional RIS in the absence of static path or when the Rician $κ$-factor is smaller than $10$.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Malicious Reconfigurable Intelligent Surfaces: How Impactful can Destructive Beamforming be?
Authors:
Steven Rivetti,
Ozlem Tugfe Demir,
Emil Bjornson,
Mikael Skoglund
Abstract:
Reconfigurable intelligent surfaces (RISs) have demonstrated significant potential for enhancing communication system performance if properly configured. However, a RIS might also pose a risk to the network security. In this letter, we explore the impact of a malicious RIS on a multi-user multiple-input single-output (MISO) system when the system is unaware of the RIS's malicious intentions. The o…
▽ More
Reconfigurable intelligent surfaces (RISs) have demonstrated significant potential for enhancing communication system performance if properly configured. However, a RIS might also pose a risk to the network security. In this letter, we explore the impact of a malicious RIS on a multi-user multiple-input single-output (MISO) system when the system is unaware of the RIS's malicious intentions. The objective of the malicious RIS is to degrade the \ac{SNR} of a specific \ac{UE}, with the option of preserving the SNR of the other UEs, making the attack harder to detect. To achieve this goal, we derive the optimal RIS phase-shift pattern, assuming perfect channel state information (CSI) at the hacker. We then relax this assumption by introducing CSI uncertainties and subsequently determine the RIS's phase-shift pattern using a robust optimization approach. Our simulations reveal a direct proportionality between the performance degradation caused by the malicious RIS and the number of reflective elements, along with resilience toward CSI uncertainties.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Localization in Massive MIMO Networks: From Near-Field to Far-Field
Authors:
Parisa Ramezani,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Source localization is the process of estimating the location of signal sources based on the signals received at different antennas of an antenna array. It has diverse applications, ranging from radar systems and underwater acoustics to wireless communication networks. Subspace-based approaches are among the most effective techniques for source localization due to their high accuracy, with Multipl…
▽ More
Source localization is the process of estimating the location of signal sources based on the signals received at different antennas of an antenna array. It has diverse applications, ranging from radar systems and underwater acoustics to wireless communication networks. Subspace-based approaches are among the most effective techniques for source localization due to their high accuracy, with Multiple SIgnal Classification (MUSIC) and Estimation of Signal Parameters by Rotational Invariance Techniques (ESPRIT) being two prominent methods in this category. These techniques leverage the fact that the space spanned by the eigenvectors of the covariance matrix of the received signals can be divided into signal and noise subspaces, which are mutually orthogonal. Originally designed for far-field source localization, these methods have undergone several modifications to accommodate near-field scenarios as well. This chapter aims to present the foundations of MUSIC and ESPRIT algorithms and introduce some of their variations for both far-field and near-field localization by a single array of antennas. We further provide numerical examples to demonstrate the performance of the presented methods.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Pilot Length Optimization with RS-LS Channel Estimation for Extremely Large Aperture Arrays
Authors:
Mert Alıcıoğlu,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Extremely large aperture arrays can enable unprecedented spatial multiplexing in beyond 5G systems due to their extremely narrow beamfocusing capabilities. However, acquiring the spatial correlation matrix to enable efficient channel estimation is a complex task due to the vast number of antenna dimensions. Recently, a new estimation method called the "reduced-subspace least squares (RS-LS) estima…
▽ More
Extremely large aperture arrays can enable unprecedented spatial multiplexing in beyond 5G systems due to their extremely narrow beamfocusing capabilities. However, acquiring the spatial correlation matrix to enable efficient channel estimation is a complex task due to the vast number of antenna dimensions. Recently, a new estimation method called the "reduced-subspace least squares (RS-LS) estimator" has been proposed for densely packed arrays. This method relies solely on the geometry of the array to limit the estimation resources. In this paper, we address a gap in the existing literature by deriving the average spectral efficiency for a certain distribution of user equipments (UEs) and a lower bound on it when using the RS-LS estimator. This bound is determined by the channel gain and the statistics of the normalized spatial correlation matrices of potential UEs but, importantly, does not require knowledge of a specific UE's spatial correlation matrix. We establish that there exists a pilot length that maximizes this expression. Additionally, we derive an approximate expression for the optimal pilot length under low signal-to-noise ratio (SNR) conditions. Simulation results validate the tightness of the derived lower bound and the effectiveness of using the optimized pilot length.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Mixed Static and Reconfigurable Metasurface Deployment in Indoor Dense Spaces: How Much Reconfigurability is Needed?
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an…
▽ More
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an increased power, cabling, and signaling cost. To see how reconfigurability affects the network performance, we propose an iterative algorithm based on the feasible point pursuit successive convex approximation method. We jointly optimize the types and phase-shifts of the surfaces and the time portion allocated to each user equipment to maximize the minimum data rate achieved by the network. Our numerical results demonstrate that the minimum data rate improves as more RISs are introduced but the gain diminishes after some point. Therefore, introducing more reconfigurability is not always necessary. Another result shows that to reach the same data rate achieved by using 22 SMSs, at least 18 RISs are needed. This suggests that when it is costly to deploy many RISs, as an inexpensive alternative solution, one can reach the same data rate just by densely deploying more SMSs.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Parametric Near-Field Channel Estimation for Extremely Large Aperture Arrays
Authors:
Alva Kosasih,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Accurate channel estimation is critical to fully exploit the beamforming gains when communicating with extremely large aperture arrays. The propagation distances between the user and receiver, which potentially has thousands of antennas/elements, are such that they are located in the radiative near-field region of each other when considering the Fraunhofer distance of the entire array. Therefore,…
▽ More
Accurate channel estimation is critical to fully exploit the beamforming gains when communicating with extremely large aperture arrays. The propagation distances between the user and receiver, which potentially has thousands of antennas/elements, are such that they are located in the radiative near-field region of each other when considering the Fraunhofer distance of the entire array. Therefore, it is imperative to consider near-field effects to achieve proper channel estimation. This paper proposes a parametric multi-user near-field channel estimation algorithm based on MUltiple SIgnal Classification (MUSIC) method to obtain the essential parameters describing the users' locations. We derive the estimated channel by incorporating the estimated parameters into the near-field channel model. Additionally, we implement a least-squares-based estimation corrector, resulting in a precise near-field channel estimation. Simulation results demonstrate that our proposed scheme outperforms classical least-squares and minimum mean-square error channel estimation methods in terms of normalized beamforming gain and normalized mean-square error.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Joint Processing and Transmission Energy Optimization for ISAC in Cell-Free Massive MIMO with URLLC
Authors:
Zinat Behdad,
Özlem Tuğfe Demir,
Ki Won Sung,
Cicek Cavdar
Abstract:
In this paper, we explore the concept of integrated sensing and communication (ISAC) within a downlink cell-free massive MIMO (multiple-input multiple-output) system featuring multi-static sensing and users requiring ultra-reliable low-latency communications (URLLC). Our focus involves the formulation of two non-convex algorithms that jointly solve power and blocklength allocation for end-to-end (…
▽ More
In this paper, we explore the concept of integrated sensing and communication (ISAC) within a downlink cell-free massive MIMO (multiple-input multiple-output) system featuring multi-static sensing and users requiring ultra-reliable low-latency communications (URLLC). Our focus involves the formulation of two non-convex algorithms that jointly solve power and blocklength allocation for end-to-end (E2E) minimization. The objectives are to jointly minimize sensing/communication processing and transmission energy consumption, while simultaneously meeting the requirements for sensing and URLLC. To address the inherent non-convexity of these optimization problems, we utilize techniques such as the Feasible Point Pursuit - Successive Convex Approximation (FPP-SCA), Concave-Convex Programming (CCP), and fractional programming. We conduct a comparative analysis of the performance of these algorithms in ISAC scenarios and against a URLLC-only scenario where sensing is not integrated. Our numerical results highlight the superior performance of the E2E energy minimization algorithm, especially in scenarios without sensing capability. Additionally, our study underscores the increasing prominence of energy consumption associated with sensing processing tasks as the number of sensing receive access points rises. Furthermore, the results emphasize that a higher sensing signal-to-interference-plus-noise ratio threshold is associated with an escalation in E2E energy consumption, thereby narrowing the performance gap between the two proposed algorithms.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Interplay between Sensing and Communication in Cell-Free Massive MIMO with URLLC Users
Authors:
Zinat Behdad,
Özlem Tuğfe Demir,
Ki Won Sung,
Cicek Cavdar
Abstract:
This paper studies integrated sensing and communication (ISAC) in the downlink of a cell-free massive multiple-input multiple-output (MIMO) system with multi-static sensing and ultra-reliable low-latency communication (URLLC) users. We propose a successive convex approximation-based power allocation algorithm that maximizes energy efficiency while satisfying the sensing and URLLC requirements. In…
▽ More
This paper studies integrated sensing and communication (ISAC) in the downlink of a cell-free massive multiple-input multiple-output (MIMO) system with multi-static sensing and ultra-reliable low-latency communication (URLLC) users. We propose a successive convex approximation-based power allocation algorithm that maximizes energy efficiency while satisfying the sensing and URLLC requirements. In addition, we provide a new definition for network availability, which accounts for both sensing and URLLC requirements. The impact of blocklength, sensing requirement, and required reliability as a function of decoding error probability on network availability and energy efficiency is investigated. The proposed power allocation algorithm is compared to a communication-centric approach where only the URLLC requirement is considered. It is shown that the URLLC-only approach is incapable of meeting sensing requirements, while the proposed ISAC algorithm fulfills both sensing and URLLC requirements, albeit with an associated increase in energy consumption. This increment can be reduced up to 75% by utilizing additional symbols for sensing. It is also demonstrated that larger blocklengths enhance network availability and offer greater robustness against stringent reliability requirements.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Towards 6G MIMO: Massive Spatial Multiplexing, Dense Arrays, and Interplay Between Electromagnetics and Processing
Authors:
Emil Björnson,
Chan-Byoung Chae,
Robert W. Heath Jr.,
Thomas L. Marzetta,
Amine Mezghani,
Luca Sanguinetti,
Fredrik Rusek,
Miguel R. Castellanos,
Dongsoo Jun,
Özlem Tugfe Demir
Abstract:
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO…
▽ More
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
A New Polar-Domain Dictionary Design for the Near-field Region of Extremely Large Aperture Arrays
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
A grid of orthogonal beams with zero column coherence can be easily constructed to cover all prospective user equipments (UEs) in the far-field region of a multiple-antenna base station (BS). However, when the BS is equipped with an extremely large aperture array, the Fraunhofer distance is huge, causing the UEs to be located in the radiative near-field region. This calls for designing a grid of b…
▽ More
A grid of orthogonal beams with zero column coherence can be easily constructed to cover all prospective user equipments (UEs) in the far-field region of a multiple-antenna base station (BS). However, when the BS is equipped with an extremely large aperture array, the Fraunhofer distance is huge, causing the UEs to be located in the radiative near-field region. This calls for designing a grid of beams based on a near-field dictionary. In the previous work, a polar-domain grid design was proposed to maintain control over the column coherence. A limitation of this approach is identified in this paper, and we propose an enhanced methodology for the design of a polar-domain dictionary specifically tailored for the near-field of an extremely large aperture uniform planar array. Through simulation results, it is demonstrated that the proposed dictionary, employing a non-uniform distance sampling approach, achieves lower column coherence than the benchmark and significantly improves the localization of UEs compared to uniform distance sampling.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Multi-Static Target Detection and Power Allocation for Integrated Sensing and Communication in Cell-Free Massive MIMO
Authors:
Zinat Behdad,
Özlem Tuğfe Demir,
Ki Won Sung,
Emil Björnson,
Cicek Cavdar
Abstract:
This paper studies an integrated sensing and communication (ISAC) system within a centralized cell-free massive MIMO (multiple-input multiple-output) network for target detection. ISAC transmit access points serve the user equipments in the downlink and optionally steer a beam toward the target in a multi-static sensing framework. A maximum a posteriori ratio test detector is developed for target…
▽ More
This paper studies an integrated sensing and communication (ISAC) system within a centralized cell-free massive MIMO (multiple-input multiple-output) network for target detection. ISAC transmit access points serve the user equipments in the downlink and optionally steer a beam toward the target in a multi-static sensing framework. A maximum a posteriori ratio test detector is developed for target detection in the presence of clutter, so-called target-free signals. Additionally, sensing spectral efficiency (SE) is introduced as a key metric, capturing the impact of resource utilization in ISAC. A power allocation algorithm is proposed to maximize the sensing signal-to-interference-plus-noise ratio while ensuring minimum communication requirements. Two ISAC configurations are studied: utilizing existing communication beams for sensing and using additional sensing beams. The proposed algorithm's efficiency is investigated in realistic and idealistic scenarios, corresponding to the presence and absence of the target-free channels, respectively. Despite performance degradation in the presence of target-free channels, the proposed algorithm outperforms the interference-unaware benchmark, leveraging clutter statistics. Comparisons with a fully communication-centric algorithm reveal superior performance in both cluttered and clutter-free environments. The incorporation of an extra sensing beam enhances detection performance for lower radar cross-section variances. Moreover, the results demonstrate the effectiveness of the integrated operation of sensing and communication compared to an orthogonal resource-sharing approach.
△ Less
Submitted 27 March, 2024; v1 submitted 21 May, 2023;
originally announced May 2023.
-
Optimizing Reconfigurable Intelligent Surfaces for Short Transmissions: How Detailed Configurations can be Afforded?
Authors:
Anders Enqvist,
Özlem Tuğfe Demir,
Cicek Cavdar,
Emil Björnson
Abstract:
This paper examines how to minimize the energy consumption of a user equipment (UE) when transmitting short data payloads. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS), which requires additional pilot signals to be configured, to improve the channel conditions. The challenge is that the pilot signals increase the energy consumption and must be balanced agains…
▽ More
This paper examines how to minimize the energy consumption of a user equipment (UE) when transmitting short data payloads. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS), which requires additional pilot signals to be configured, to improve the channel conditions. The challenge is that the pilot signals increase the energy consumption and must be balanced against energy savings during data transmission. We derive a formula for the energy consumption, including both pilot and data transmission powers and the effects of imperfect channel state information and discrete phase-shifts.
To shorten the pilot length, we propose dividing the RIS into subarrays of multiple elements using the same reflection coefficient. The pilot power and subarray size are tuned to the payload length to minimize the energy consumption. Analytical results show that there exists a unique energy-minimizing solution. For small payloads and when the direct path loss between the BS and UE is weak compared to the path loss via the RIS, the solution is using subarrays with many elements and low pilot power and vice versa. The optimal percentage of energy spent on pilot signaling is in the order of 10-40%.
△ Less
Submitted 18 October, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Optimizing Reconfigurable Intelligent Surfaces for Small Data Packets: A Subarray Approach
Authors:
Anders Enqvist,
Özlem Tuğfe Demir,
Cicek Cavdar,
Emil Björnson
Abstract:
In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and d…
▽ More
In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and data transmission powers into account. By dividing the RIS into subarrays consisting of multiple RIS elements using the same reflection coefficient, the pilot overhead can be tuned to minimize the energy consumption while maintaining parts of the aperture gain. Our analytical results show that there exists an energy-minimizing subarray size. For small data blocks and when the channel conditions between the BS and UE are favorable compared to the path to the RIS, the energy consumption is minimized using large subarrays. When the channel conditions to the RIS are better and the data blocks are large, it is preferable to use fewer elements per subarray and potentially configure the elements individually.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
mmWave Coverage Extension Using Reconfigurable Intelligent Surfaces in Indoor Dense Spaces
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose…
▽ More
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose a feasible point pursuit and successive convex approximation-based algorithm, which solves the problem by jointly selecting the RIS locations, optimizing the RIS phase-shifts, and allocating time resources to user equipments (UEs). The numerical results demonstrate substantial coverage extension by using at least four RISs, and a data rate of 130 Mbit/s is guaranteed for UEs in the considered area of an airplane cabin.
△ Less
Submitted 18 February, 2023;
originally announced February 2023.
-
Cell-Free Massive MIMO in O-RAN: Energy-Aware Joint Orchestration of Cloud, Fronthaul, and Radio Resources
Authors:
Özlem Tuğfe Demir,
Meysam Masoudi,
Emil Björnson,
Cicek Cavdar
Abstract:
For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this pape…
▽ More
For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this paper, we explore the performance and power consumption of cell-free massive MIMO technology in comparison with traditional small-cell systems, in the virtualized O-RAN architecture. We compare two different functional split options and different resource orchestration mechanisms. In the end-to-end orchestration scheme, we aim to minimize the end-to-end power consumption by jointly allocating the radio, optical fronthaul, and virtualized cloud processing resources. We compare end-to-end orchestration with two other schemes: i) "radio-only" where radio resources are optimized independently from the cloud and ii) "local cloud coordination" where orchestration is only allowed among a local cluster of radio units. We develop several algorithms to solve the end-to-end power minimization and sum spectral efficiency maximization problems. The numerical results demonstrate that end-to-end resource allocation with fully virtualized fronthaul and cloud resources provides a substantial additional power saving than the other resource orchestration schemes.
△ Less
Submitted 29 January, 2024; v1 submitted 15 January, 2023;
originally announced January 2023.
-
Technology Trends for Massive MIMO towards 6G
Authors:
Yiming Huo,
Xingqin Lin,
Boya Di,
Hongliang Zhang,
Francisco Javier Lorca Hernando,
Ahmet Serdar Tan,
Shahid Mumtaz,
Özlem Tuğfe Demir,
Kun Chen-Hu
Abstract:
At the dawn of the next-generation wireless systems and networks, massive multiple-input multiple-output (MIMO) has been envisioned as one of the enabling technologies. With the continued success of being applied in the 5G and beyond, the massive MIMO technology has demonstrated its advantageousness, integrability, and extendibility. Moreover, several evolutionary features and revolutionizing tren…
▽ More
At the dawn of the next-generation wireless systems and networks, massive multiple-input multiple-output (MIMO) has been envisioned as one of the enabling technologies. With the continued success of being applied in the 5G and beyond, the massive MIMO technology has demonstrated its advantageousness, integrability, and extendibility. Moreover, several evolutionary features and revolutionizing trends for massive MIMO have gradually emerged in recent years, which are expected to reshape the future 6G wireless systems and networks. Specifically, the functions and performance of future massive MIMO systems will be enabled and enhanced via combining other innovative technologies, architectures, and strategies such as intelligent omni-surfaces (IOSs)/intelligent reflecting surfaces (IRSs), artificial intelligence (AI), THz communications, cell free architecture. Also, more diverse vertical applications based on massive MIMO will emerge and prosper, such as wireless localization and sensing, vehicular communications, non-terrestrial communications, remote sensing, inter-planetary communications.
△ Less
Submitted 5 January, 2023; v1 submitted 4 January, 2023;
originally announced January 2023.
-
Power Allocation for Joint Communication and Sensing in Cell-Free Massive MIMO
Authors:
Zinat Behdad,
Özlem Tuğfe Demir,
Ki Won Sung,
Emil Björnson,
Cicek Cavdar
Abstract:
This paper studies a joint communication and sensing (JCAS) system with downlink communication and multi-static sensing for single-target detection in a cloud radio access network architecture. A centralized operation of cell-free massive MIMO is considered for communication and sensing purposes. The JCAS transmit access points (APs) jointly serve the user equipments (UEs) and optionally steer a b…
▽ More
This paper studies a joint communication and sensing (JCAS) system with downlink communication and multi-static sensing for single-target detection in a cloud radio access network architecture. A centralized operation of cell-free massive MIMO is considered for communication and sensing purposes. The JCAS transmit access points (APs) jointly serve the user equipments (UEs) and optionally steer a beam towards the target. A maximum a posteriori ratio test detector is derived to detect the target using signals received at distributed APs. We propose a power allocation algorithm to maximize the sensing signal-to-noise ratio under the condition that a minimal signal-to-interference-plus-noise ratio value for each UE is guaranteed. Numerical results show that, compared to the fully communication-centric power allocation, the detection probability under a certain false alarm probability can be increased significantly by the proposed algorithm for both JCAS setups: i) using additional sensing symbols or ii) using only existing communication symbols.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.
-
Energy-Efficient Cell-Free Massive MIMO Through Sparse Large-Scale Fading Processing
Authors:
Shuaifei Chen,
Jiayi Zhang,
Emil Björnson,
Özlem Tuğfe Demir,
Bo Ai
Abstract:
Cell-free massive multiple-input multiple-output (CF mMIMO) systems serve the user equipments (UEs) by geographically distributed access points (APs) by means of joint transmission and reception. To limit the power consumption due to fronthaul signaling and processing, each UE should only be served by a subset of the APs, but it is hard to identify that subset. Previous works have tackled this com…
▽ More
Cell-free massive multiple-input multiple-output (CF mMIMO) systems serve the user equipments (UEs) by geographically distributed access points (APs) by means of joint transmission and reception. To limit the power consumption due to fronthaul signaling and processing, each UE should only be served by a subset of the APs, but it is hard to identify that subset. Previous works have tackled this combinatorial problem heuristically. In this paper, we propose a sparse distributed processing design for CF mMIMO, where the AP-UE association and long-term signal processing coefficients are jointly optimized. We formulate two sparsity-inducing mean-squared error (MSE) minimization problems and solve them by using efficient proximal approaches with block-coordinate descent. For the downlink, more specifically, we develop a virtually optimized large-scale fading precoding (V-LSFP) scheme using uplink-downlink duality. The numerical results show that the proposed sparse processing schemes work well in both uplink and downlink. In particular, they achieve almost the same spectral efficiency as if all APs would serve all UEs, while the energy efficiency is 2-4 times higher thanks to the reduced processing and signaling.
△ Less
Submitted 22 April, 2023; v1 submitted 29 August, 2022;
originally announced August 2022.
-
Channel Estimation under Hardware Impairments: Bayesian Methods versus Deep Learning
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers the impact of general hardware impairments in a multiple-antenna base station and user equipments on the uplink performance. First, the effective channels are analytically derived for distortion-aware receivers when using finite-sized signal constellations. Next, a deep feedforward neural network is designed and trained to estimate the effective channels. Its performance is co…
▽ More
This paper considers the impact of general hardware impairments in a multiple-antenna base station and user equipments on the uplink performance. First, the effective channels are analytically derived for distortion-aware receivers when using finite-sized signal constellations. Next, a deep feedforward neural network is designed and trained to estimate the effective channels. Its performance is compared with state-of-the-art distortion-aware and unaware Bayesian linear minimum mean-squared error (LMMSE) estimators. The proposed deep learning approach improves the estimation quality by exploiting impairment characteristics, while LMMSE methods treat distortion as noise.
△ Less
Submitted 8 August, 2022;
originally announced August 2022.
-
Exploiting Array Geometry for Reduced-Subspace Channel Estimation in RIS-Aided Communications
Authors:
Özlem Tuğfe Demir,
Emil Björnson,
Luca Sanguinetti
Abstract:
A reconfigurable intelligent surface (RIS) can be used to improve the channel gain between a base station (BS) and user equipment (UE), but only if its $N$ reflecting elements are configured properly. This requires accurate estimation of the cascaded channel from the UE to the BS through each RIS element. If the channel structure is not exploited, pilot sequences of length $N$ must be used, which…
▽ More
A reconfigurable intelligent surface (RIS) can be used to improve the channel gain between a base station (BS) and user equipment (UE), but only if its $N$ reflecting elements are configured properly. This requires accurate estimation of the cascaded channel from the UE to the BS through each RIS element. If the channel structure is not exploited, pilot sequences of length $N$ must be used, which is a major practical challenge since $N$ is typically at the order of hundreds. To address this problem without requiring user-specific channel statistics, we propose a novel estimator, called reduced-subspace least squares (RS-LS) estimator, that only uses knowledge of the array geometry. The RIS phase-shift pattern is optimized to minimize the mean-square error of the channel estimates. The RS-LS estimator largely outperforms the conventional least-squares estimator, and can be utilized with a much shorter pilot length since it exploits the fact that the array geometry confines the possible channel realizations to a reduced-rank subspace.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Sparse Large-Scale Fading Decoding in Cell-Free Massive MIMO Systems
Authors:
Shuaifei Chen,
Jiayi Zhang,
Emil Björnson,
Özlem Tuğfe Demir,
Bo Ai
Abstract:
Cell-free massive multiple-input multiple-output (CF mMIMO) systems are characterized by having many more access points (APs) than user equipments (UEs). A key challenge is to determine which APs should serve which UEs. Previous work has tackled this combinatorial problem heuristically. This paper proposes a sparse large-scale fading decoding (LSFD) design for CF mMIMO to jointly optimize the asso…
▽ More
Cell-free massive multiple-input multiple-output (CF mMIMO) systems are characterized by having many more access points (APs) than user equipments (UEs). A key challenge is to determine which APs should serve which UEs. Previous work has tackled this combinatorial problem heuristically. This paper proposes a sparse large-scale fading decoding (LSFD) design for CF mMIMO to jointly optimize the association and LSFD. We formulate a group sparsity problem and then solve it using a proximal algorithm with block-coordinate descent. Numerical results show that sparse LSFD achieves almost the same spectral efficiency as optimal LSFD, thus achieving a higher energy efficiency since the processing and signaling are reduced.
△ Less
Submitted 6 May, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Cell-Free Massive MIMO in Virtualized CRAN: How to Minimize the Total Network Power?
Authors:
Özlem Tuğfe Demir,
Meysam Masoudi,
Emil Björnson,
Cicek Cavdar
Abstract:
Previous works on cell-free massive MIMO mostly consider physical-layer and fronthaul transport aspects. How to deploy cell-free massive MIMO functionality in a practical wireless system is an open problem. This paper proposes a new cell-free architecture that can be implemented on top of a virtualized cloud radio access network (V-CRAN). We aim to minimize the end-to-end power consumption by join…
▽ More
Previous works on cell-free massive MIMO mostly consider physical-layer and fronthaul transport aspects. How to deploy cell-free massive MIMO functionality in a practical wireless system is an open problem. This paper proposes a new cell-free architecture that can be implemented on top of a virtualized cloud radio access network (V-CRAN). We aim to minimize the end-to-end power consumption by jointly considering the radio, optical fronthaul, virtualized cloud processing resources, and spectral efficiency requirements of the user equipments. The considered optimization problem is cast in a mixed binary second-order cone programming form and, thus, the global optimum can be found using a branch-and-bound algorithm. The optimal power-efficient solution of our proposed cell-free system is compared with conventional small-cell implemented using V-CRAN, to determine the benefits of cell-free networking. The numerical results demonstrate that cell-free massive MIMO increases the maximum rate substantially, which can be provided with almost the same energy per bit. We show that it is more power-efficient to activate cell-free massive MIMO already at low spectral efficiencies (above 1 bit/s/Hz).
△ Less
Submitted 18 February, 2022;
originally announced February 2022.
-
A Primer on Near-Field Beamforming for Arrays and Reconfigurable Intelligent Surfaces
Authors:
Emil Björnson,
Özlem Tugfe Demir,
Luca Sanguinetti
Abstract:
Wireless communication systems have almost exclusively operated in the far-field of antennas and antenna arrays, which is conventionally characterized by having propagation distances beyond the Fraunhofer distance. This is natural since the Fraunhofer distance is normally only a few wavelengths. With the advent of active arrays and passive reconfigurable intelligent surfaces (RIS) that are physica…
▽ More
Wireless communication systems have almost exclusively operated in the far-field of antennas and antenna arrays, which is conventionally characterized by having propagation distances beyond the Fraunhofer distance. This is natural since the Fraunhofer distance is normally only a few wavelengths. With the advent of active arrays and passive reconfigurable intelligent surfaces (RIS) that are physically large, it is plausible that the transmitter or receiver is located in between the Fraunhofer distance of the individual array/surface elements and the Fraunhofer distance of the entire array. An RIS then can be configured to reflect the incident waveform towards a point in the radiative near-field of the surface, resulting in a beam with finite depth, or as a conventional angular beam with infinity focus, which only results in amplification in the far-field. To understand when these different options are viable, an accurate characterization of the near-field behaviors is necessary. In this paper, we revisit the motivation and approximations behind the Fraunhofer distance and show that it is not the right metric for determining when near-field focusing is possible. We obtain the distance range where finite-depth beamforming is possible and the distance where the beamforming gain tapers off.
△ Less
Submitted 8 December, 2021; v1 submitted 13 October, 2021;
originally announced October 2021.
-
RIS-Assisted Massive MIMO with Multi-Specular Spatially Correlated Fading
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Reconfigurable intelligent surfaces (RISs) have attracted great attention as a potential beyond 5G technology. These surfaces consist of many passive elements of metamaterials whose impedance can be controllable to change the phase, amplitude, or other characteristics of wireless signals im**ing on them. Channel estimation is a critical task when it comes to the control of a large RIS when havin…
▽ More
Reconfigurable intelligent surfaces (RISs) have attracted great attention as a potential beyond 5G technology. These surfaces consist of many passive elements of metamaterials whose impedance can be controllable to change the phase, amplitude, or other characteristics of wireless signals im**ing on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we propose a novel channel estimation scheme that exploits spatial correlation characteristics at both the massive multiple-input multiple-output (MIMO) base station and the planar RISs, and other statistical characteristics of multi-specular fading in a mobile environment. Moreover, a novel heuristic for phase-shift selection at the RISs is developed, inspired by signal processing methods that are effective in conventional massive MIMO. Simulation results demonstrate that the proposed uplink RIS-aided framework improves the spectral efficiency of the cell-edge mobile users substantially in comparison to a conventional single-cell massive MIMO system.
△ Less
Submitted 8 September, 2021;
originally announced September 2021.
-
Learning-Based Downlink Power Allocation in Cell-Free Massive MIMO Systems
Authors:
Mahmoud Zaher,
Özlem Tuğfe Demir,
Emil Björnson,
Marina Petrova
Abstract:
This paper considers a cell-free massive multiple-input multiple-output (MIMO) system that consists of a large number of geographically distributed access points (APs) serving multiple users via coherent joint transmission. The downlink performance of the system is evaluated, with maximum ratio and regularized zero-forcing precoding, under two optimization objectives for power allocation: sum spec…
▽ More
This paper considers a cell-free massive multiple-input multiple-output (MIMO) system that consists of a large number of geographically distributed access points (APs) serving multiple users via coherent joint transmission. The downlink performance of the system is evaluated, with maximum ratio and regularized zero-forcing precoding, under two optimization objectives for power allocation: sum spectral efficiency (SE) maximization and proportional fairness. We present iterative centralized algorithms for solving these problems. Aiming at a less computationally complex and also distributed scalable solution, we train a deep neural network (DNN) to approximate the same network-wide power allocation. Instead of training our DNN to mimic the actual optimization procedure, we use a heuristic power allocation, based on large-scale fading (LSF) parameters, as the pre-processed input to the DNN. We train the DNN to refine the heuristic scheme, thereby providing higher SE, using only local information at each AP. Another distributed DNN that exploits side information assumed to be available at the central processing unit is designed for improved performance. Further, we develop a clustered DNN model where the LSF parameters of a small number of APs, forming a cluster within a relatively large network, are used to jointly approximate the power coefficients of the cluster.
△ Less
Submitted 14 September, 2022; v1 submitted 7 September, 2021;
originally announced September 2021.
-
Channel Modeling and Channel Estimation for Holographic Massive MIMO with Planar Arrays
Authors:
Özlem Tuğfe Demir,
Emil Björnson,
Luca Sanguinetti
Abstract:
In a realistic wireless environment, the multi-antenna channel usually exhibits spatially correlation fading. This is more emphasized when a large number of antennas is densely deployed, known as holographic massive MIMO (multiple-input multiple-output). In the first part of this letter, we develop a channel model for holographic massive MIMO by considering both non-isotropic scattering and direct…
▽ More
In a realistic wireless environment, the multi-antenna channel usually exhibits spatially correlation fading. This is more emphasized when a large number of antennas is densely deployed, known as holographic massive MIMO (multiple-input multiple-output). In the first part of this letter, we develop a channel model for holographic massive MIMO by considering both non-isotropic scattering and directive antennas. With a large number of antennas, it is difficult to obtain full knowledge of the spatial correlation matrix. In this case, channel estimation is conventionally done using the least-squares (LS) estimator that requires no prior information of the channel statistics or array geometry. In the second part of this letter, we propose a novel channel estimation scheme that exploits the array geometry to identify a subspace of reduced rank that covers the eigenspace of any spatial correlation matrix. The proposed estimator outperforms the LS estimator, without using any user-specific channel statistics.
△ Less
Submitted 2 February, 2022; v1 submitted 10 August, 2021;
originally announced August 2021.
-
Foundations of User-Centric Cell-Free Massive MIMO
Authors:
Özlem Tuğfe Demir,
Emil Björnson,
Luca Sanguinetti
Abstract:
Imagine a coverage area where each mobile device is communicating with a preferred set of wireless access points (among many) that are selected based on its needs and cooperate to jointly serve it, instead of creating autonomous cells. This effectively leads to a user-centric post-cellular network architecture, which can resolve many of the interference issues and service-quality variations that a…
▽ More
Imagine a coverage area where each mobile device is communicating with a preferred set of wireless access points (among many) that are selected based on its needs and cooperate to jointly serve it, instead of creating autonomous cells. This effectively leads to a user-centric post-cellular network architecture, which can resolve many of the interference issues and service-quality variations that appear in cellular networks. This concept is called User-centric Cell-free Massive MIMO (multiple-input multiple-output) and has its roots in the intersection between three technology components: Massive MIMO, coordinated multipoint processing, and ultra-dense networks. The main challenge is to achieve the benefits of cell-free operation in a practically feasible way, with computational complexity and fronthaul requirements that are scalable to enable massively large networks with many mobile devices. This monograph covers the foundations of User-centric Cell-free Massive MIMO, starting from the motivation and mathematical definition. It continues by describing the state-of-the-art signal processing algorithms for channel estimation, uplink data reception, and downlink data transmission with either centralized or distributed implementation. The achievable spectral efficiency is mathematically derived and evaluated numerically using a running example that exposes the impact of various system parameters and algorithmic choices. The fundamental tradeoffs between communication performance, computational complexity, and fronthaul signaling requirements are thoroughly analyzed. Finally, the basic algorithms for pilot assignment, dynamic cooperation cluster formation, and power optimization are provided, while open problems related to these and other resource allocation problems are reviewed. All the numerical examples can be reproduced using the accompanying Matlab code.
△ Less
Submitted 27 November, 2023; v1 submitted 5 August, 2021;
originally announced August 2021.
-
Is Channel Estimation Necessary to Select Phase-Shifts for RIS-Assisted Massive MIMO?
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Reconfigurable intelligent surfaces (RISs) consist of many passive elements of metamaterials whose impedance can be controllable to change the characteristics of wireless signals im**ing on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we derive Bayesian channel estimators…
▽ More
Reconfigurable intelligent surfaces (RISs) consist of many passive elements of metamaterials whose impedance can be controllable to change the characteristics of wireless signals im**ing on them. Channel estimation is a critical task when it comes to the control of a large RIS when having a channel with a large number of multipath components. In this paper, we derive Bayesian channel estimators for two RIS-assisted massive multiple-input multiple-output (MIMO) configurations: i) the short-term RIS configuration based on the instantaneous channel estimates; ii) the long-term RIS configuration based on the channel statistics. The proposed methods exploit spatial correlation characteristics at both the base station and the planar RISs, and other statistical characteristics of multi-specular fading in a mobile environment. Moreover, a novel heuristic for phase-shift selection at the RISs is developed. A computationally efficient fixed-point algorithm, which solves the max-min fairness power control optimally, is proposed. Simulation results demonstrate that the proposed uplink RIS-aided framework improves the spectral efficiency of the cell-edge mobile user equipments substantially in comparison to a conventional single-cell massive MIMO system. The impact of several channel effects are studied to gain insight about when the channel estimation, i.e., the short-term configuration, is preferable in comparison to the long-term RIS configuration to boost the spectral efficiency.
△ Less
Submitted 13 September, 2023; v1 submitted 17 June, 2021;
originally announced June 2021.
-
Cell-Free Massive MIMO with Large-Scale Fading Decoding and Dynamic Cooperation Clustering
Authors:
Özlem Tuğfe Demir,
Emil Björnson,
Luca Sanguinetti
Abstract:
This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading deco…
▽ More
This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading decoding (LSFD). The fronthaul signaling load is analyzed and a nearly optimal second-layer decoding scheme at the CPU is proposed to reduce the fronthaul requirements compared to the optimal scheme. We also revisit the joint optimization of LSFD weights and uplink power control and show that the corresponding max-min fair optimization problem can be solved optimally via an efficient fixed-point algorithm. We provide simulations that bring new insights into the cell-free massive MIMO implementation.
△ Less
Submitted 9 September, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Large-Scale Fading Precoding for Spatially Correlated Rician Fading with Phase Shifts
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
We consider large-scale fading precoding (LSFP), which is a two-layer precoding scheme in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems to suppress inter-cell interference. We obtain the closed-form spectral efficiency (SE) with LSFP at the central network controller and maximum ratio precoding at the base stations (BSs) using the linear minimum mean-squared erro…
▽ More
We consider large-scale fading precoding (LSFP), which is a two-layer precoding scheme in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems to suppress inter-cell interference. We obtain the closed-form spectral efficiency (SE) with LSFP at the central network controller and maximum ratio precoding at the base stations (BSs) using the linear minimum mean-squared error or least squares channel estimators. The LSFP weights are designed based on the long-term channel statistics and two important performance metrics are optimized under the per-BS transmit power constraints. These metrics are sum SE and proportional fairness, where the resulting optimization problems are non-convex. Two efficient algorithms are developed to solve these problems by using the weighted minimum mean-squared error and the alternating direction method of multipliers methods. Moreover, two partial LSFP schemes are proposed to reduce the fronthaul signaling requirements. Simulations quantify the performance improvement of LSFP over standard single-layer precoding schemes and identify the specific advantage of each optimization problem.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
The Bussgang Decomposition of Non-Linear Systems: Basic Theory and MIMO Extensions
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Many of the systems that appear in various signal processing applications are non-linear, for example, due to hardware impairments such as non-linear amplifiers and finite-resolution quantization. The Bussgang decomposition is a popular tool for analyzing the performance of systems that involve such non-linear components. In a nutshell, the decomposition provides an exact probabilistic relationshi…
▽ More
Many of the systems that appear in various signal processing applications are non-linear, for example, due to hardware impairments such as non-linear amplifiers and finite-resolution quantization. The Bussgang decomposition is a popular tool for analyzing the performance of systems that involve such non-linear components. In a nutshell, the decomposition provides an exact probabilistic relationship between the output and the input of a non-linearity: the output is equal to a scaled version of the input plus uncorrelated distortion. The decomposition can either be used to compute exact performance results or lower bounds where the uncorrelated distortion is treated as independent noise. This lecture note explains the basic theory, provides key examples, extends the theory to complex-valued vector signals, and clarifies some potential misconceptions.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
Joint Power Control and LSFD for Wireless-Powered Cell-Free Massive MIMO
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
This paper considers wireless uplink information and downlink power transfer in cell-free massive multiple-input multiple-output systems. The single-antenna user equipments (UEs) utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the multiple-antenna access points (APs). We consider Rician fading and maximum ratio processing based on either linear mini…
▽ More
This paper considers wireless uplink information and downlink power transfer in cell-free massive multiple-input multiple-output systems. The single-antenna user equipments (UEs) utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the multiple-antenna access points (APs). We consider Rician fading and maximum ratio processing based on either linear minimum mean-squared error (LMMSE) or least-squares (LS) channel estimation. We derive the average harvested energy by using a practical non-linear energy harvesting circuit model for both coherent and non-coherent transmission schemes. Furthermore, the uplink spectral efficiency (SE) is derived for all the considered methods and the max-min fairness problem is cast where the optimization variables are the AP and UE power control coefficients together with the large-scale fading decoding vectors. The objective is to maximize the minimum SE of the UEs' under APs' and UEs' transmission power constraints. A novel alternating optimization algorithm with guaranteed convergence and improvement at each step is proposed to solve the highly-coupled non-convex problem.
△ Less
Submitted 12 November, 2020; v1 submitted 19 February, 2020;
originally announced February 2020.
-
ADMM-Based One-Bit Quantized Signal Detection for Massive MIMO Systems with Hardware Impairments
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by ch…
▽ More
This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by choosing a suitable cost function that treats the unquantized received signal at the base station as the variable. We exploit the additional structure of the one-bit quantization and signal modulation by including proper constraints. To solve the non-convex quadratically-constrained quadratic programming (QCQP) problem, we propose an ADMM-based algorithm with closed-form update equations. Then, we replace the harsh projectors in the updates with their soft versions to improve the detection performance. We show that the proposed ADMM-based algorithm outperforms the state-of-the-art linear receivers significantly in terms of bit error rate (BER) and the performance gain increases with the number of antennas and users.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Large-Scale Fading Precoding for Maximizing the Product of SINRs
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers the large-scale fading precoding design for mitigating the pilot contamination in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems. Rician fading with spatially correlated channels are considered where the line-of-sight (LOS) components of the channels are randomly phase-shifted in each coherence block. The large-scale fading precoding weights a…
▽ More
This paper considers the large-scale fading precoding design for mitigating the pilot contamination in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems. Rician fading with spatially correlated channels are considered where the line-of-sight (LOS) components of the channels are randomly phase-shifted in each coherence block. The large-scale fading precoding weights are designed based on maximizing the product of the signal-to-interference-plus-noise ratios (SINRs) of the users, which provides a good balance between max-min fairness and sum rate maximization. The spectral efficiency (SE) is derived based on the scaled least squares (LS) estimates of the channels, which only utilize the despreaded pilot signals without any matrix inversion. Simulation results show that the two-layer large-scale fading precoding improves the SE of almost all users compared to the conventional single-layer precoding.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Max-Min Fair Wireless-Powered Cell-Free Massive MIMO for Uncorrelated Rician Fading Channels
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels…
▽ More
This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels being phase-shifted in each coherence block. The uplink spectral efficiency (SE) is derived for this model and the max-min fairness problem is considered where the optimization variables are the AP and UE power control coefficients together with the large-scale fading decoding vectors. The objective is to maximize the minimum SE of the users under APs' and UEs' transmission power constraints. An alternating optimization algorithm is proposed for the solution of the highly-coupled non-convex problem.
△ Less
Submitted 25 January, 2020;
originally announced January 2020.
-
Impact of Backward Crosstalk in 2x2 MIMO Transmitters on NMSE and Spectral Efficiency
Authors:
Peter Händel,
Özlem Tuğfe Demir,
Emil Björnson,
Daniel Rönnow
Abstract:
We consider backward crosstalk in 2 x 2 transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter a…
▽ More
We consider backward crosstalk in 2 x 2 transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter as a linear transformation of the input plus uncorrelated distortion. The normalized mean-square errors (NMSEs) between the distorted and desired amplified signals are expressed analytically and the optimal closed-form power back-off that minimizes the worst NMSE of the two branches is derived. In the second part of the paper, an achievable spectral efficiency (SE) is presented for the communication from this ``dirty'' transmitter to another single-antenna receiver. The SE-maximizing precoder is optimally found by exploiting the hardware characteristics. Furthermore, the optimal power back-off is analyzed for two sub-optimal precoders, which either do not exploit any hardware knowledge or only partial knowledge. The simulation results show that the performance of these sub-optimal precoders is close-to-optimal. We also discuss how the analysis in this paper can be extended to transmitters with an arbitrary number of antenna branches.
△ Less
Submitted 4 May, 2020; v1 submitted 18 December, 2019;
originally announced December 2019.
-
Channel Estimation in Massive MIMO under Hardware Non-Linearities: Bayesian Methods versus Deep Learning
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achi…
▽ More
This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achieved by several receivers are explored for third-order non-linearities. Next, two deep feedforward neural networks are designed and trained to estimate the effective channels and the distortion variance at each BS antenna, which are used in signal detection. We compare the performance of the proposed methods with state-of-the-art distortion-aware and -unaware Bayesian linear minimum mean-squared error (LMMSE) estimators. The proposed deep learning approach improves the estimation quality by exploiting impairment characteristics, while LMMSE methods treat distortion as noise. Using the data generated by the derived effective channels for general order of non-linearities at both the BS and UEs, it is shown that the deep learning-based estimator provides better estimates of the effective channels also for non-linearities more than order three.
△ Less
Submitted 13 January, 2020; v1 submitted 17 November, 2019;
originally announced November 2019.
