-
Bistatic Sensing at THz Frequencies via a Two-Stage Ultra-Wideband MIMO-OFDM System
Authors:
Tommaso Bacchielli,
Lorenzo Pucci,
Davide Dardari,
Andrea Giorgetti
Abstract:
Only the chairs can edit The availability of abundant bandwidth at terahertz (THz) frequencies holds promise for significantly enhancing the sensing performance of integrated sensing and communication (ISAC) systems in the next-generation wireless systems, enabling high accuracy and resolution for precise target localization. In orthogonal frequency-division multiplexing (OFDM) systems, wide bandw…
▽ More
Only the chairs can edit The availability of abundant bandwidth at terahertz (THz) frequencies holds promise for significantly enhancing the sensing performance of integrated sensing and communication (ISAC) systems in the next-generation wireless systems, enabling high accuracy and resolution for precise target localization. In orthogonal frequency-division multiplexing (OFDM) systems, wide bandwidth can be achieved by increasing the subcarrier spacing rather than the number of subcarriers, thereby kee** the complexity of the sensing system low. However, this approach may lead to an ambiguity problem in target range estimation. To address this issue, this work proposes a two-stage maximum likelihood method for estimating target position in an ultra-wideband bistatic multiple-antenna OFDM-based ISAC system operating at THz frequencies. Numerical results show that the proposed estimation approach effectively resolves the ambiguity problem while achieving high resolution and accuracy target position estimation at a very low signal-to-noise ratio regime.
△ Less
Submitted 28 May, 2024;
originally announced May 2024.
-
A Deep-NN Beamforming Approach for Dual Function Radar-Communication THz UAV
Authors:
Gianluca Fontanesi,
Anna Guerra,
Francesco Guidi,
Juan A. Vásquez-Peralvo,
Nir Shlezinger,
Alberto Zanella,
Eva Lagunas,
Symeon Chatzinotas,
Davide Dardari,
Petar M. Djurić
Abstract:
In this paper, we consider a scenario with one UAV equipped with a ULA, which sends combined information and sensing signals to communicate with multiple GBS and, at the same time, senses potential targets placed within an interested area on the ground. We aim to jointly design the transmit beamforming with the GBS association to optimize communication performance while ensuring high sensing accur…
▽ More
In this paper, we consider a scenario with one UAV equipped with a ULA, which sends combined information and sensing signals to communicate with multiple GBS and, at the same time, senses potential targets placed within an interested area on the ground. We aim to jointly design the transmit beamforming with the GBS association to optimize communication performance while ensuring high sensing accuracy. We propose a predictive beamforming framework based on a dual DNN solution to solve the formulated nonconvex optimization problem. A first DNN is trained to produce the required beamforming matrix for any point of the UAV flying area in a reduced time compared to state-of-the-art beamforming optimizers. A second DNN is trained to learn the optimal map** from the input features, power, and EIRP constraints to the GBS association decision. Finally, we provide an extensive simulation analysis to corroborate the proposed approach and show the benefits of EIRP, SINR performance and computational speed.
△ Less
Submitted 27 May, 2024;
originally announced May 2024.
-
Dynamic Scattering Arrays for Simultaneous Electromagnetic Processing and Radiation in Holographic MIMO Systems
Authors:
Davide Dardari
Abstract:
To meet the stringent requirements of next-generation wireless networks, multiple-input multiple-output (MIMO) technology is expected to become massive and pervasive. Unfortunately, this could pose scalability issues in terms of complexity, power consumption, cost, and processing latency. Therefore, novel technologies and design approaches, such as the recently introduced holographic MIMO paradigm…
▽ More
To meet the stringent requirements of next-generation wireless networks, multiple-input multiple-output (MIMO) technology is expected to become massive and pervasive. Unfortunately, this could pose scalability issues in terms of complexity, power consumption, cost, and processing latency. Therefore, novel technologies and design approaches, such as the recently introduced holographic MIMO paradigm, must be investigated to make future networks sustainable. In this context, we propose the concept of a dynamic scattering array (DSA) as a versatile 3D structure capable of performing joint wave-based computing and radiation by moving the processing from the digital domain to the electromagnetic (EM) domain. We provide a general analytical framework for modeling DSAs, introduce specific design algorithms, and apply them to various use cases. The examples presented in the numerical results demonstrate the potential of DSAs to further reduce complexity and the number of radiofrequency (RF) chains in holographic MIMO systems while achieving enhanced EM wave processing and radiation flexibility for tasks such as beamforming and single- and multi-user MIMO.
△ Less
Submitted 25 May, 2024;
originally announced May 2024.
-
Performance Bounds for Velocity Estimation with Large Antenna Arrays
Authors:
Caterina Giovannetti,
Nicolò Decarli,
Davide Dardari
Abstract:
Joint communication and sensing (JCS) is envisioned as an enabler of future 6G networks. One of the key features of these networks will be the use of extremely large aperture arrays (ELAAs) and high operating frequencies, which will result in significant near-field propagation effects. This unique property can be harnessed to improve sensing capabilities. In this paper, we focus on velocity sensin…
▽ More
Joint communication and sensing (JCS) is envisioned as an enabler of future 6G networks. One of the key features of these networks will be the use of extremely large aperture arrays (ELAAs) and high operating frequencies, which will result in significant near-field propagation effects. This unique property can be harnessed to improve sensing capabilities. In this paper, we focus on velocity sensing, as using ELAAs allows the estimation of not just the radial component but also the transverse component. We derive analytical performance bounds for both velocity components, demonstrating how they are affected by the different system parameters and geometries. These insights offer a foundational understanding of how near-field effects play in velocity sensing differently from the far field and from position estimate.
△ Less
Submitted 8 May, 2024;
originally announced May 2024.
-
An Overview of Intelligent Meta-surfaces for 6G and Beyond: Opportunities, Trends, and Challenges
Authors:
Mayur Katwe,
Aryan Kaushik,
Lina Mohjazi,
Mohammad Abualhayja'a,
Davide Dardari,
Keshav Singh,
Muhammad Ali Imran,
M. Majid Butt,
Octavia A. Dobre
Abstract:
With the impending arrival of the sixth generation (6G) of wireless communication technology, the telecommunications landscape is poised for another revolutionary transformation. At the forefront of this evolution are intelligent meta-surfaces (IS), emerging as a disruptive physical layer technology with the potential to redefine the capabilities and performance metrics of future wireless networks…
▽ More
With the impending arrival of the sixth generation (6G) of wireless communication technology, the telecommunications landscape is poised for another revolutionary transformation. At the forefront of this evolution are intelligent meta-surfaces (IS), emerging as a disruptive physical layer technology with the potential to redefine the capabilities and performance metrics of future wireless networks. As 6G evolves from concept to reality, industry stakeholders, standards organizations, and regulatory bodies are collaborating to define the specifications, protocols, and interoperability standards governing IS deployment. Against this background, this article delves into the ongoing standardization efforts, emerging trends, potential opportunities, and prevailing challenges surrounding the integration of IS into the framework of 6G and beyond networks. Specifically, it provides a tutorial-style overview of recent advancements in IS and explores their potential applications within future networks beyond 6G. Additionally, the article identifies key challenges in the design and implementation of various types of intelligent surfaces, along with considerations for their practical standardization. Finally, it highlights potential future prospects in this evolving field.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
The Integrated Sensing and Communication Revolution for 6G: Vision, Techniques, and Applications
Authors:
Nuria González-Prelcic,
Musa Furkan Keskin,
Ossi Kaltiokallio,
Mikko Valkama,
Davide Dardari,
Xiao Shen,
Yuan Shen,
Murat Bayraktar,
Henk Wymeersch
Abstract:
Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that har…
▽ More
Future wireless networks will integrate sensing, learning and communication to provide new services beyond communication and to become more resilient. Sensors at the network infrastructure, sensors on the user equipment, and the sensing capability of the communication signal itself provide a new source of data that connects the physical and radio frequency environments. A wireless network that harnesses all these sensing data can not only enable additional sensing services, but also become more resilient to channel-dependent effects like blockage and better support adaptation in dynamic environments as networks reconfigure. In this paper, we provide a vision for integrated sensing and communication (ISAC) networks and an overview of how signal processing, optimization and machine learning techniques can be leveraged to make them a reality in the context of 6G. We also include some examples of the performance of several of these strategies when evaluated using a simulation framework based on a combination of ray tracing measurements and mathematical models that mix the digital and physical worlds.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Localization Based on MIMO Backscattering from Retro-Directive Antenna Arrays
Authors:
Marina Lotti,
Nicolò Decarli,
Gianni Pasolini,
Davide Dardari
Abstract:
In next-generation vehicular environments, precise localization is crucial for facilitating advanced applications such as autonomous driving. As automation levels escalate, the demand rises for enhanced accuracy, reliability, energy efficiency, update rate, and reduced latency in position information delivery. In this paper, we propose the exploitation of backscattering from retro-directive antenn…
▽ More
In next-generation vehicular environments, precise localization is crucial for facilitating advanced applications such as autonomous driving. As automation levels escalate, the demand rises for enhanced accuracy, reliability, energy efficiency, update rate, and reduced latency in position information delivery. In this paper, we propose the exploitation of backscattering from retro-directive antenna arrays (RAAs) to address these imperatives. We introduce and discuss two RAA-based architectures designed for various applications, including network localization and navigation. These architectures enable swift and simple angle-of-arrival estimation by using signals backscattered from RAAs. They also leverage multiple antennas to capitalize on multiple-input-multiple-output (MIMO) gains, thereby addressing the challenges posed by the inherent path loss in backscatter communication, especially when operating at high frequencies. Consequently, angle-based localization becomes achievable with remarkably low latency, ideal for mobile and vehicular applications. This paper introduces ad-hoc signalling and processing schemes for this purpose, and their performance is analytically investigated. Numerical results underscore the potential of these schemes, offering precise and ultra-low-latency localization with low complexity and ultra-low energy consumption devices.
△ Less
Submitted 22 April, 2024;
originally announced April 2024.
-
Holographic Imaging with XL-MIMO and RIS: Illumination and Reflection Design
Authors:
Giulia Torcolacci,
Anna Guerra,
Haiyang Zhang,
Francesco Guidi,
Qianyu Yang,
Yonina C. Eldar,
Davide Dardari
Abstract:
This paper addresses a near-field imaging problem utilizing extremely large-scale multiple-input multiple-output (XL-MIMO) antennas and reconfigurable intelligent surfaces (RISs) already in place for wireless communications. To this end, we consider a system with a fixed transmitting antenna array illuminating a region of interest (ROI) and a fixed receiving antenna array inferring the ROI's scatt…
▽ More
This paper addresses a near-field imaging problem utilizing extremely large-scale multiple-input multiple-output (XL-MIMO) antennas and reconfigurable intelligent surfaces (RISs) already in place for wireless communications. To this end, we consider a system with a fixed transmitting antenna array illuminating a region of interest (ROI) and a fixed receiving antenna array inferring the ROI's scattering coefficients. Leveraging XL-MIMO and high frequencies, the ROI is situated in the radiative near-field region of both antenna arrays, thus enhancing the degrees of freedom (DoF) (i.e., the channel matrix rank) of the illuminating and sensing channels available for imaging, here referred to as holographic imaging. To further boost the imaging performance, we optimize the illuminating waveform by solving a min-max optimization problem having the upper bound of the mean squared error (MSE) of the image estimate as the objective function. Additionally, we address the challenge of non-line-of-sight (NLOS) scenarios by considering the presence of a RIS and deriving its optimal reflection coefficients. Numerical results investigate the interplay between illumination optimization, geometric configuration (monostatic and bistatic), the DoF of the illuminating and sensing channels, image estimation accuracy, and image complexity.
△ Less
Submitted 13 May, 2024; v1 submitted 18 December, 2023;
originally announced December 2023.
-
6G Localization and Sensing in the Near Field: Features, Opportunities, and Challenges
Authors:
Hui Chen,
Musa Furkan Keskin,
Adham Sakhnini,
Nicoló Decarli,
Sofie Pollin,
Davide Dardari,
Henk Wymeersch
Abstract:
The far-field channel model has historically been used in wireless communications due to the simplicity of mathematical modeling and convenience for algorithm design. With the need for high data rates, low latency, and ubiquitous connectivity in the sixth generation (6G) of communication systems, new technology enablers such as extremely large antenna arrays (ELAAs), reconfigurable intelligent sur…
▽ More
The far-field channel model has historically been used in wireless communications due to the simplicity of mathematical modeling and convenience for algorithm design. With the need for high data rates, low latency, and ubiquitous connectivity in the sixth generation (6G) of communication systems, new technology enablers such as extremely large antenna arrays (ELAAs), reconfigurable intelligent surfaces (RISs), and distributed multiple-input-multiple-output (D-MIMO) systems will be adopted. These enablers not only aim to improve communication services but also have an impact on localization and sensing (L&S), which are expected to be fundamentally built-in functionalities in future wireless systems. Despite appearing in different scenarios and supporting different frequency bands, such enablers share the so-called near-field (NF) features, which will provide extra geometric information conducive to L&S. In this work, we describe the NF features, namely, the spherical wave model, spatial non-stationarity, and beam squint effect. After discussing how L&S see NF differently from communication, the opportunities and open research challenges are provided.
△ Less
Submitted 14 December, 2023; v1 submitted 30 August, 2023;
originally announced August 2023.
-
NLOS Localization Exploiting Frequency-selective Metasurfaces
Authors:
Marina Lotti,
Giacomo Calesini,
Davide Dardari
Abstract:
This paper introduces a new approach to localize user devices located in non-line-of-sight (NLOS) areas using a passive, non-reconfigurable, and frequency-selective metasurface called metaprism. By analyzing the spatial filtering of subcarriers in the orthogonal frequency division multiplexing (OFDM) signal transmitted by each user device, the base station can estimate the device's angle of view,…
▽ More
This paper introduces a new approach to localize user devices located in non-line-of-sight (NLOS) areas using a passive, non-reconfigurable, and frequency-selective metasurface called metaprism. By analyzing the spatial filtering of subcarriers in the orthogonal frequency division multiplexing (OFDM) signal transmitted by each user device, the base station can estimate the device's angle of view, distance, and subsequently its position. Two different criteria are proposed for designing the frequency response of the metaprism, depending on whether the users operate in the far-field or near-field region of the metaprism. Simulation results in the millimeter-wave band demonstrate that the system can achieve an accuracy of less than 2 degrees in angle estimation and in the order of decimeters in position estimation.
△ Less
Submitted 24 July, 2023;
originally announced July 2023.
-
Holographic MIMO Communications exploiting the Orbital Angular Momentum
Authors:
Giulia Torcolacci,
Nicolò Decarli,
Davide Dardari
Abstract:
This study delves into the potential of harnessing the orbital angular momentum (OAM) property of electromagnetic waves in near-field and line-of-sight scenarios by utilizing large intelligent surfaces, in the context of holographic multiple-input multiple-output (MIMO) communications. The paper starts by characterizing OAM-based communications and investigating the connection between OAM-carrying…
▽ More
This study delves into the potential of harnessing the orbital angular momentum (OAM) property of electromagnetic waves in near-field and line-of-sight scenarios by utilizing large intelligent surfaces, in the context of holographic multiple-input multiple-output (MIMO) communications. The paper starts by characterizing OAM-based communications and investigating the connection between OAM-carrying waves and optimum communication modes recently analyzed for communicating with smart surfaces. Subsequently, it proposes implementable strategies for generating and detecting OAM-based communication signals using intelligent surfaces and optimization methods that leverage focusing techniques. Then, the performance of these strategies is quantitatively evaluated through simulations. The numerical results show that OAM waves while constituting a viable and more practical alternative to optimum communication modes are sub-optimal in terms of achievable capacity.
△ Less
Submitted 3 April, 2023;
originally announced April 2023.
-
Reconfigurable Electromagnetic Environments: A General Framework
Authors:
Davide Dardari
Abstract:
The recent introduction of the smart radio environments (SREs) paradigm, enabled by reconfigurable intelligent surfaces (RISs), has put in evidence the need for physically-consistent models and design tools for communication systems integrating electromagnetic (EM) and signal processing theories. In this perspective, starting from rigorous EM arguments, in this paper we propose a general framework…
▽ More
The recent introduction of the smart radio environments (SREs) paradigm, enabled by reconfigurable intelligent surfaces (RISs), has put in evidence the need for physically-consistent models and design tools for communication systems integrating electromagnetic (EM) and signal processing theories. In this perspective, starting from rigorous EM arguments, in this paper we propose a general framework for the characterization and design of programmable EM environments. We first show that any linear EM environment in the presence of boundary conditions can be interpreted as a space-variant linear feedback filter. Then we provide a methodology to characterize programmable EM systems as a linear graph described by matrix operators thus leading to the determination of the transfer function of the EM system. Finally, some examples are given related to the characterization and design of RISs, also showing that some previous results in the literature are just particular cases of our general framework.
△ Less
Submitted 30 March, 2023;
originally announced March 2023.
-
Grant-free Random Access with Self-conjugating Metasurfaces
Authors:
Davide Dardari,
Marina Lotti,
Nicolò Decarli,
Gianni Pasolini
Abstract:
Recently, grant-free random access schemes have received significant attention in the scientific community as a solution for extremely low-latency massive communications in new industrial Internet-of-things (IIoT) and digital twins applications. Unfortunately, the adoption of such schemes in the mmWave and THz bands is challenging because massive antenna arrays are needed to counteract the high pa…
▽ More
Recently, grant-free random access schemes have received significant attention in the scientific community as a solution for extremely low-latency massive communications in new industrial Internet-of-things (IIoT) and digital twins applications. Unfortunately, the adoption of such schemes in the mmWave and THz bands is challenging because massive antenna arrays are needed to counteract the high path loss and provide massive access with consequent significant signaling overhead for channel estimation and slow beam alignment procedures between the base station (BS) and user equipments (UEs), which are in contrast to the ultra-low-latency requirement, as well as to the need for low hardware complexity and energy consumption. In this paper, we propose the adoption of a self-conjugating metasurface (SCM) at the UE side, where the signal sent by the BS is reflected after being conjugated and phase-modulated according to the UE data. Then, a novel grant-free random access protocol is presented capable to detect new UEs and establish parallel multiple-input multiple-output (MIMO) uplink communications with almost zero latency and jitter. This is done in a blind way without the need for RF/ADC chains at the UE side as well as without explicit channel estimation and time-consuming beam alignment schemes.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Radio SLAM for 6G Systems at THz Frequencies: Design and Experimental Validation
Authors:
Marina Lotti,
Gianni Pasolini,
Anna Guerra,
Francesco Guidi,
Raffaele D'Errico,
Davide Dardari
Abstract:
Next-generation wireless networks will see the convergence of communication and sensing, also exploiting the availability of large bandwidths in the Terahertz (THz) spectrum and electrically large antenna arrays on handheld devices. In particular, it is envisaged that user devices will be able to automatically scan their surroundings by steering a very narrow antenna beam and collecting echoes ref…
▽ More
Next-generation wireless networks will see the convergence of communication and sensing, also exploiting the availability of large bandwidths in the Terahertz (THz) spectrum and electrically large antenna arrays on handheld devices. In particular, it is envisaged that user devices will be able to automatically scan their surroundings by steering a very narrow antenna beam and collecting echoes reflected by objects and walls to derive a map of indoors and infer users' trajectories using simultaneous localization and map** (SLAM) techniques. In this paper, we address this scenario by proposing original radioSLAM (R-SLAM) algorithms, derived from image processing techniques, to map the environment and pinpoint the device position in the map starting from measurements sensed by a mobile THz radar. Initially, to fully understand the THz backscattering phenomenon, we provide an experimental characterization of the THz backscattering channel in indoor environments. Then, the performance of the proposed algorithms is assessed using real-world THz radar measurements and is compared with state-of-the-art SLAM techniques, demonstrating the superiority of the proposed approaches.
△ Less
Submitted 23 December, 2022;
originally announced December 2022.
-
Spatial Multiplexing in Near Field MIMO Channels with Reconfigurable Intelligent Surfaces
Authors:
Giulio Bartoli,
Andrea Abrardo,
Nicolo Decarli,
Davide Dardari,
Marco Di Renzo
Abstract:
We consider a multiple-input multiple-output (MIMO) channel in the presence of a reconfigurable intelligent surface (RIS). Specifically, our focus is on analyzing the spatial multiplexing gains in line-of-sight and low-scattering MIMO channels in the near field. We prove that the channel capacity is achieved by diagonalizing the end-to-end transmitter-RIS-receiver channel, and applying the water-f…
▽ More
We consider a multiple-input multiple-output (MIMO) channel in the presence of a reconfigurable intelligent surface (RIS). Specifically, our focus is on analyzing the spatial multiplexing gains in line-of-sight and low-scattering MIMO channels in the near field. We prove that the channel capacity is achieved by diagonalizing the end-to-end transmitter-RIS-receiver channel, and applying the water-filling power allocation to the ordered product of the singular values of the transmitter-RIS and RIS-receiver channels. The obtained capacity-achieving solution requires an RIS with a non-diagonal matrix of reflection coefficients. Under the assumption of nearly-passive RIS, i.e., no power amplification is needed at the RIS, the water-filling power allocation is necessary only at the transmitter. We refer to this design of RIS as a linear, nearly-passive, reconfigurable electromagnetic object (EMO). In addition, we introduce a closed-form and low-complexity design for RIS, whose matrix of reflection coefficients is diagonal with unit-modulus entries. The reflection coefficients are given by the product of two focusing functions: one steering the RIS-aided signal towards the mid-point of the MIMO transmitter and one steering the RIS-aided signal towards the mid-point of the MIMO receiver. We prove that this solution is exact in line-of-sight channels under the paraxial setup. With the aid of extensive numerical simulations in line-of-sight (free-space) channels, we show that the proposed approach offers performance (rate and degrees of freedom) close to that obtained by numerically solving non-convex optimization problems at a high computational complexity. Also, we show that it provides performance close to that achieved by the EMO (non-diagonal RIS) in most of the considered case studies.
△ Less
Submitted 8 January, 2023; v1 submitted 21 December, 2022;
originally announced December 2022.
-
Two-Timescale Joint Precoding Design and RIS Optimization for User Tracking in Near-Field MIMO Systems
Authors:
Silvia Palmucci,
Anna Guerra,
Andrea Abrardo,
Davide Dardari
Abstract:
In this paper, we propose a novel framework that aims to jointly design the reflection coefficients of multiple RISs and the precoding strategy of a single BS to optimize the self-tracking of the position and the velocity of a single multi-antenna UE that moves either in the far- or near-field region. Differently from the literature, and to keep the overall complexity affordable, we assume that RI…
▽ More
In this paper, we propose a novel framework that aims to jointly design the reflection coefficients of multiple RISs and the precoding strategy of a single BS to optimize the self-tracking of the position and the velocity of a single multi-antenna UE that moves either in the far- or near-field region. Differently from the literature, and to keep the overall complexity affordable, we assume that RIS optimization is performed less frequently than localization and precoding adaptation. The proposed procedure leads to minimize the inverse of the received power in the UE position uncertainty area between two subsequent optimization steps.
The optimal RIS and precoder strategy are compared with the classical beam-focusing strategy and with a scheme that maximizes the communication rate. It is shown that if the RISs are optimized for communications, their configuration is suboptimal when used for tracking purposes.
Numerical results show that in typical indoor environments with only one BS and a few RISs operating on millimeter waves, high location accuracy in the range of less than half a meter can be achieved.
△ Less
Submitted 26 April, 2023; v1 submitted 14 December, 2022;
originally announced December 2022.
-
Near-field Localization with Dynamic Metasurface Antennas
Authors:
Qianyu Yang,
Anna Guerra,
Francesco Guidi,
Nir Shlezinger,
Haiyang Zhang,
Davide Dardari,
Baoyun Wang,
Yonina C. Eldar
Abstract:
Sixth generation (6G) cellular communications are expected to support enhanced wireless localization capabilities. The widespread deployment of large arrays and high-frequency bandwidths give rise to new considerations for localization applications. First, emerging antenna architectures, such as dynamic metasurface antennas (DMAs), are expected to be frequently utilized thanks to the achievable hi…
▽ More
Sixth generation (6G) cellular communications are expected to support enhanced wireless localization capabilities. The widespread deployment of large arrays and high-frequency bandwidths give rise to new considerations for localization applications. First, emerging antenna architectures, such as dynamic metasurface antennas (DMAs), are expected to be frequently utilized thanks to the achievable high angular resolution and low hardware complexity. Further, wireless localization is likely to take place in the radiating near-field (Fresnel) region, which provides new degrees of freedom, because of the adoption of arrays with large apertures. While current studies mostly focus on the use of costly fully-digital antenna arrays, in this paper we investigate how DMAs can be applied for near-field localization of a single user. We use a direct positioning estimation method based on curvature-of-arrival of the im**ing wavefront to obtain the user location, and characterize the effects of DMA tuning on the estimation accuracy. Next, we propose an algorithm for configuring the DMA to optimize near-field localization, by first tuning the adjustable DMA coefficients to minimize the estimation error using postulated knowledge of the actual user position. Finally, we propose a sub-optimal iterative algorithm that does not rely on such knowledge. Simulation results show that the DMA-based near-field localization accuracy could approach that of fully-digital arrays at lower cost.
△ Less
Submitted 28 October, 2022;
originally announced October 2022.
-
LoS MIMO-Arrays vs. LoS MIMO-Surfaces
Authors:
Marco Di Renzo,
Davide Dardari,
Nicolo' Decarli
Abstract:
The wireless research community has expressed major interest in the sub-terahertz band for enabling mobile communications in future wireless networks. The sub-terahertz band offers a large amount of available bandwidth and, therefore, the promise to realize wireless communications at optical speeds. At such high frequency bands, the transceivers need to have larger apertures and need to be deploye…
▽ More
The wireless research community has expressed major interest in the sub-terahertz band for enabling mobile communications in future wireless networks. The sub-terahertz band offers a large amount of available bandwidth and, therefore, the promise to realize wireless communications at optical speeds. At such high frequency bands, the transceivers need to have larger apertures and need to be deployed more densely than at lower frequency bands. These factors proportionally increase the far-field limit and the spherical curvature of the electromagnetic waves cannot be ignored anymore. This offers the opportunity to realize spatial multiplexing even in line-of-sight channels. In this paper, we overview and compare existing design options to realize high-rank transmissions in line-of-sight channels.
△ Less
Submitted 7 February, 2023; v1 submitted 16 October, 2022;
originally announced October 2022.
-
Two-Timescale Transmission Design and RIS Optimization for Integrated Localization and Communications
Authors:
Fan Jiang,
Andrea Abrardo,
Kamran Keykhoshravi,
Henk Wymeersch,
Davide Dardari,
Marco Di Renzo
Abstract:
Reconfigurable intelligent surfaces (RISs) have tremendous potential to boost communication performance, especially when the line-of-sight (LOS) path between the user equipment (UE) and base station (BS) is blocked. To control the RIS, channel state information (CSI) is needed, which entails significant pilot overhead. To reduce this overhead and the need for frequent RIS reconfiguration, we propo…
▽ More
Reconfigurable intelligent surfaces (RISs) have tremendous potential to boost communication performance, especially when the line-of-sight (LOS) path between the user equipment (UE) and base station (BS) is blocked. To control the RIS, channel state information (CSI) is needed, which entails significant pilot overhead. To reduce this overhead and the need for frequent RIS reconfiguration, we propose a novel framework for integrated localization and communications, where RIS configurations are fixed during location coherence intervals, while BS precoders are optimized every channel coherence interval. This framework leverages accurate location information obtained with the aid of several RISs as well as novel RIS optimization and channel estimation methods. Performance in terms of localization accuracy, channel estimation error, and achievable rate demonstrates the effectiveness of the proposed approach.
△ Less
Submitted 20 November, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
6G Wireless Communications: From Far-field Beam Steering to Near-field Beam Focusing
Authors:
Haiyang Zhang,
Nir Shlezinger,
Francesco Guidi,
Davide Dardari,
Yonina C. Eldar
Abstract:
6G networks will be required to support higher data rates, improved energy efficiency, lower latency, and more diverse users compared with 5G systems. To meet these requirements, electrically extremely large-scale antenna arrays are envisioned to be key physical-layer technologies. As a consequence, it is expected that some portion of future 6G wireless communications may take place in the radiati…
▽ More
6G networks will be required to support higher data rates, improved energy efficiency, lower latency, and more diverse users compared with 5G systems. To meet these requirements, electrically extremely large-scale antenna arrays are envisioned to be key physical-layer technologies. As a consequence, it is expected that some portion of future 6G wireless communications may take place in the radiating near-field (Fresnel) region, in addition to the far-field operation as in current wireless technologies. In this article, we discuss the opportunities and challenges that arise in radiating near-field communications. We begin by discussing the key physical characteristics of near-field communications, where the standard plane-wave propagation assumption no longer holds, and clarifying its implication on the modelling of wireless channels. Then, we elaborate on the ability to leverage spherical wavefronts via beam focusing, highlighting its advantages for 6G systems. We point out several appealing application scenarios which, with proper design, can benefit from near-field operation, including interference mitigation in multi-user communications, accurate localization and focused sensing, as well as wireless power transfer with minimal energy pollution. We conclude by discussing some of the design challenges and research directions that are yet to be explored to fully harness the potential of near-field operation.
△ Less
Submitted 12 December, 2022; v1 submitted 24 March, 2022;
originally announced March 2022.
-
Near-Field Wireless Power Transfer with Dynamic Metasurface Antennas
Authors:
Haiyang Zhang,
Nir Shlezinger,
Francesco Guidi,
Davide Dardari,
Mohammadreza F Imani,
Yonina C Eldar
Abstract:
Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, ar…
▽ More
Radio frequency wireless power transfer (WPT) enables charging low-power mobile devices without relying on wired infrastructure. Current existing WPT systems are typically designed assuming far-field propagation, where the radiated energy is steered in given angles, resulting in limited efficiency and possible radiation in undesired locations. When large arrays at high frequencies, such as DMA, are employed, WPT might take place in the radiating near-field (Fresnel) region where spherical wave propagation holds, rather than plane wave propagation as in the far-field. In this paper, we study WPT systems charging multiple devices in the Fresnel region, where the energy transmitter is equipped with an emerging DMA, exploring how the antenna configuration can exploit the spherical wavefront to generate focused energy beams. In particular, after presenting a mathematical model for DMA-based radiating near-field WPT systems, we characterize the weighted sum-harvested energy maximization problem of the considered system, and we propose an efficient solution to jointly design the DMA weights and digital precoding vector. Simulation results show that our design generates focused energy beams that are capable of improving energy transfer efficiency in the radiating near-field with minimal energy pollution.
△ Less
Submitted 10 October, 2021;
originally announced October 2021.
-
Networks of UAVs of Low-Complexity for Time-Critical Localization
Authors:
Anna Guerra,
Francesco Guidi,
Davide Dardari,
Petar M. Djuric
Abstract:
Future networks of unmanned aerial vehicles (UAVs) will be tasked to carry out ever-increasing complex operations that are time-critical and that require accurate localization performance (e.g., tracking the state of a malicious user). Since there is the need to preserve low UAV complexity while tackling the challenging goals of missions in effective ways, one key aspect is the UAV intelligence (U…
▽ More
Future networks of unmanned aerial vehicles (UAVs) will be tasked to carry out ever-increasing complex operations that are time-critical and that require accurate localization performance (e.g., tracking the state of a malicious user). Since there is the need to preserve low UAV complexity while tackling the challenging goals of missions in effective ways, one key aspect is the UAV intelligence (UAV-I). The UAV's intelligence includes the UAV's capability to process information and to make decisions, e.g., to decide where to sense and whether to delegate some tasks to other network entities. In this paper, we provide an overview of possible solutions for the design of UAVs of low complexity, showing some of the needs of the UAVs for running efficient localization operations, performed either as a team or individually. Further, we focus on different network configurations, which possibly include assistance with edge computing. We also discuss open problems and future perspectives for these settings.
△ Less
Submitted 7 August, 2021;
originally announced August 2021.
-
Communication Modes with Large Intelligent Surfaces in the Near Field
Authors:
Nicolò Decarli,
Davide Dardari
Abstract:
This paper proposes a practical method for the definition of communication modes when antennas operate in the near-field region, by realizing ad-hoc beams exploiting the focusing capability of large antennas. The beamspace modeling proposed to define the communication modes is then exploited to derive expressions for their number (i.e., the degrees of freedom) in a generic setup, beyond the tradit…
▽ More
This paper proposes a practical method for the definition of communication modes when antennas operate in the near-field region, by realizing ad-hoc beams exploiting the focusing capability of large antennas. The beamspace modeling proposed to define the communication modes is then exploited to derive expressions for their number (i.e., the degrees of freedom) in a generic setup, beyond the traditional paraxial scenario, together with closed-form definitions for the basis set at the transmitting and receiving antennas for several cases of interest, such as for the communication between a large antenna and a small antenna. Numerical results show that quasi-optimal communication can be obtained starting from focusing functions. This translates into the possibility of a significant enhancement of the channel capacity even in line-of-sight channel condition, without the need of implementing optimal but complex phase/amplitude profiles on transmitting/receiving antennas as well as resorting to intensive numerical solutions. Traditional results valid under paraxial approximation are revised in light of the proposed modeling, showing that similar conclusions can be obtained from different perspectives.
△ Less
Submitted 6 December, 2021; v1 submitted 24 August, 2021;
originally announced August 2021.
-
Near-field Wireless Power Transfer for 6G Internet-of-Everything Mobile Networks: Opportunities and Challenges
Authors:
Haiyang Zhang,
Nir Shlezinger,
Francesco Guidi,
Davide Dardari,
Mohammadreza F. Imani,
Yonina C. Eldar
Abstract:
Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming t…
▽ More
Radiating wireless power transfer (WPT) brings forth the possibility to cost-efficiently charge wireless devices without requiring a wiring infrastructure. As such, it is expected to play a key role in the deployment of limited-battery communicating devices, as part of the 6G enabled Internet-of-Everything (IoE) vision. To date, radiating WPT technologies are mainly studied and designed assuming that the devices are located in the far-field region of the power radiating antenna, resulting in a relatively low energy transfer efficiency. However, with the transition of 6G systems to mmWave frequencies combined with the usage of large-scale antennas, future WPT devices are likely to operate in the radiating near-field (Fresnel) region. In this article, we provide an overview of the opportunities and challenges which arise from radiating near-field WPT. In particular, we discuss about the possibility to realize beam focusing in near-field radiating conditions, and highlight its possible implications for WPT in future {IoE} networks. Besides, we overview some of the design challenges and research directions which arise from this emerging paradigm, including its simultaneous operation with wireless communications, radiating waveform considerations, hardware aspects, and operation with typical antenna architectures.
△ Less
Submitted 17 August, 2021;
originally announced August 2021.
-
Beam Focusing for Near-Field Multi-User MIMO Communications
Authors:
Haiyang Zhang,
Nir Shlezinger,
Francesco Guidi,
Davide Dardari,
Mohammadreza F. Imani,
Yonina C. Eldar
Abstract:
Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user…
▽ More
Large antenna arrays and high-frequency bands are two key features of future wireless communication systems. The combination of large-scale antennas with high transmission frequencies often results in the communicating devices operating in the near-field (Fresnel) region. In this paper, we study the potential of beam focusing, feasible in near-field operation, in facilitating high-rate multi-user downlink multiple-input multiple-output (MIMO) systems. As the ability to achieve beam focusing is dictated by the transmit antenna, we study near-field signaling considering different antenna structures, including fully-digital architectures, hybrid phase shifter-based precoders, and the emerging dynamic metasurface antenna (DMA) architecture for massive MIMO arrays. We first provide a mathematical model to characterize near-field wireless channels as well as the transmission pattern for the considered antenna architectures. Then, we formulate the beam focusing problem for the goal of maximizing the achievable sum-rate in multi-user networks. We propose efficient solutions based on the sum-rate maximization task for fully-digital, (phase shifters based-) hybrid and DMA architectures. Simulation results show the feasibility of the proposed beam focusing scheme for both single- and multi-user scenarios. In particular, the designed focused beams are such that users residing at the same angular direction can communicate reliably without interfering with each other, which is not achievable using conventional far-field beam steering.
△ Less
Submitted 27 May, 2021;
originally announced May 2021.
-
Towards 6G Holographic Localization: Enabling Technologies and Perspectives
Authors:
Ahmed Elzanaty,
Anna Guerra,
Francesco Guidi,
Davide Dardari,
Mohamed-Slim Alouini
Abstract:
In the last years, we have experienced the evolution of wireless localization from being a simple add-on feature for enabling specific applications to become an essential characteristic of wireless cellular networks, as for sixth-generation (6G) cellular networks. This paper illustrates the importance of radio localization and its role in all the cellular generations, from first-generation (1G) to…
▽ More
In the last years, we have experienced the evolution of wireless localization from being a simple add-on feature for enabling specific applications to become an essential characteristic of wireless cellular networks, as for sixth-generation (6G) cellular networks. This paper illustrates the importance of radio localization and its role in all the cellular generations, from first-generation (1G) to 6G. Also, it speculates about the idea of holographic localization where the characteristics of electromagnetic (EM) waves, including the spherical wavefront in the near-field, are fully controlled and exploited to achieve better wireless localization. Along this line, we briefly overview possible technologies, such as large intelligent surfaces, and challenges to realize holographic localization. To corroborate our vision, we also include a numerical example that confirms the potentialities of holographic localization.
△ Less
Submitted 15 February, 2022; v1 submitted 23 March, 2021;
originally announced March 2021.
-
Near-field Tracking with Large Antenna Arrays: Fundamental Limits and Practical Algorithms
Authors:
Anna Guerra,
Francesco Guidi,
Davide Dardari,
Petar M. Djuric
Abstract:
Applications towards 6G have brought a huge interest towards arrays with a high number of antennas and operating within the millimeter and sub-THz bandwidths for joint communication and localization. With such large arrays, the plane wave approximation is often not accurate because the system may operate in the near-field propagation region (Fresnel region) where the electromagnetic field wavefron…
▽ More
Applications towards 6G have brought a huge interest towards arrays with a high number of antennas and operating within the millimeter and sub-THz bandwidths for joint communication and localization. With such large arrays, the plane wave approximation is often not accurate because the system may operate in the near-field propagation region (Fresnel region) where the electromagnetic field wavefront is spherical. In this case, the curvature of arrival (CoA) is a measure of the spherical wavefront that can be used to infer the source position using only a single large array. In this paper, we study a near-field tracking problem for inferring the state (i.e., the position and velocity) of a moving source with an ad-hoc observation model that accounts for the phase profile of a large receiving array. For this tracking problem, we derive the posterior Cramér-Rao Lower Bound (P-CRLB) and show the effects when the source moves inside and outside the Fresnel region. We provide insights on how the loss of positioning information outside Fresnel comes from an increase of the ranging error rather than from inaccuracies of angular estimation. Then, we investigate the performance of different Bayesian tracking algorithms in the presence of model mismatches and abrupt trajectory changes. Our results demonstrate the feasibility and high accuracy for most of the tracking approaches without the need of wideband signals and of any synchronization scheme. signals and of any synchronization scheme.
△ Less
Submitted 11 February, 2021;
originally announced February 2021.
-
Holographic Communication using Intelligent Surfaces
Authors:
Davide Dardari,
Nicoló Decarli
Abstract:
Holographic communication is intended as an holistic way to manipulate with unprecedented flexibility the electromagnetic field generated or sensed by an antenna. This is of particular interest when using large antennas at high frequency (e.g., the millimeter wave or terahertz), whose operating condition may easily fall in the Fresnel propagation region (radiating near-field), where the classical…
▽ More
Holographic communication is intended as an holistic way to manipulate with unprecedented flexibility the electromagnetic field generated or sensed by an antenna. This is of particular interest when using large antennas at high frequency (e.g., the millimeter wave or terahertz), whose operating condition may easily fall in the Fresnel propagation region (radiating near-field), where the classical plane wave propagation assumption is no longer valid. This paper analyzes the optimal communication involving large intelligent surfaces, realized for example with metamaterials as possible enabling technology for holographic communication. It is shown that traditional propagation models must be revised and that, when exploiting spherical wave propagation in the Fresnel region with large surfaces, new opportunities are opened, for example, in terms of the number of orthogonal communication channels.
△ Less
Submitted 2 December, 2020;
originally announced December 2020.
-
6G White Paper on Localization and Sensing
Authors:
Andre Bourdoux,
Andre Noll Barreto,
Barend van Liempd,
Carlos de Lima,
Davide Dardari,
Didier Belot,
Elana-Simona Lohan,
Gonzalo Seco-Granados,
Hadi Sarieddeen,
Henk Wymeersch,
Jaakko Suutala,
Jani Saloranta,
Maxime Guillaud,
Minna Isomursu,
Mikko Valkama,
Muhammad Reza Kahar Aziz,
Rafael Berkvens,
Tachporn Sanguanpuak,
Tommy Svensson,
Yang Miao
Abstract:
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principl…
▽ More
This white paper explores future localization and sensing opportunities for beyond 5G wireless communication systems by identifying key technology enablers and discussing their underlying challenges, implementation issues, and identifying potential solutions. In addition, we present exciting new opportunities for localization and sensing applications, which will disrupt traditional design principles and revolutionize the way we live, interact with our environment, and do business. Following the trend initiated in the 5G NR systems, 6G will continue to develop towards even higher frequency ranges, wider bandwidths, and massive antenna arrays. In turn, this will enable sensing solutions with very fine range, Doppler and angular resolutions, as well as localization to cm-level degree of accuracy. Moreover, new materials, device types, and reconfigurable surfaces will allow network operators to reshape and control the electromagnetic response of the environment. At the same time, machine learning and artificial intelligence will leverage the unprecedented availability of data and computing resources to tackle the biggest and hardest problems in wireless communication systems. 6G will be truly intelligent wireless systems that will not only provide ubiquitous communication but also empower high accuracy localization and high-resolution sensing services. They will become the catalyst for this revolution by bringing about a unique new set of features and service capabilities, where localization and sensing will coexist with communication, continuously sharing the available resources in time, frequency and space. This white paper concludes by highlighting foundational research challenges, as well as implications and opportunities related to privacy, security, and trust. Addressing these challenges will undoubtedly require an inter-disciplinary and concerted effort from the research community.
△ Less
Submitted 2 June, 2020;
originally announced June 2020.
-
Reinforcement Learning for UAV Autonomous Navigation, Map** and Target Detection
Authors:
Anna Guerra,
Francesco Guidi,
Davide Dardari,
Petar M. Djuric
Abstract:
In this paper, we study a joint detection, map** and navigation problem for a single unmanned aerial vehicle (UAV) equipped with a low complexity radar and flying in an unknown environment. The goal is to optimize its trajectory with the purpose of maximizing the map** accuracy and, at the same time, to avoid areas where measurements might not be sufficiently informative from the perspective o…
▽ More
In this paper, we study a joint detection, map** and navigation problem for a single unmanned aerial vehicle (UAV) equipped with a low complexity radar and flying in an unknown environment. The goal is to optimize its trajectory with the purpose of maximizing the map** accuracy and, at the same time, to avoid areas where measurements might not be sufficiently informative from the perspective of a target detection. This problem is formulated as a Markov decision process (MDP) where the UAV is an agent that runs either a state estimator for target detection and for environment map**, and a reinforcement learning (RL) algorithm to infer its own policy of navigation (i.e., the control law). Numerical results show the feasibility of the proposed idea, highlighting the UAV's capability of autonomously exploring areas with high probability of target detection while reconstructing the surrounding environment.
△ Less
Submitted 5 May, 2020;
originally announced May 2020.
-
Beamwidth Optimization and Resource Partitioning Scheme for Localization Assisted mm-wave Communications
Authors:
Gourab Ghatak,
Remun Koirala,
Antonio De Domenico,
Benoit Denis,
Davide Dardari,
Bernard Uguen,
Marceau Coupechoux
Abstract:
We study a mm-wave wireless network deployed along the roads of an urban area, to support localization and communication services simultaneously for outdoor mobile users. In this network, we propose a mm-wave initial beam-selection scheme based on localization-bounds, which greatly reduces the initial access delay as compared to traditional initial access schemes for standalone mm-wave base statio…
▽ More
We study a mm-wave wireless network deployed along the roads of an urban area, to support localization and communication services simultaneously for outdoor mobile users. In this network, we propose a mm-wave initial beam-selection scheme based on localization-bounds, which greatly reduces the initial access delay as compared to traditional initial access schemes for standalone mm-wave base station (BS). Then, we introduce a downlink transmission protocol, in which the radio frames are partitioned into three phases, namely, initial access, data, and localization, respectively. We establish a trade-off between the localization and communication performance of mm-wave systems, and show how enhanced localization can actually improve the data-communication performance. Our results suggest that dense BS deployments enable to allocate more resources to the data phase while still maintaining appreciable localization performance. Furthermore, for the case of sparse deployments and large beam dictionary size (i.e., with thinner beams), more resources must be allotted to the localization phase for optimizing the rate coverage. Based on our results, we provide several system design insights and dimensioning rules for the network operators that will deploy the first generation of mm-wave BSs.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Using MetaPrisms for Performance Improvement in Wireless Communications
Authors:
Davide Dardari,
Devis Massari
Abstract:
In this paper, we put forth the idea of metaprism, a passive and non-reconfigurable metasurface acting as a metamirror with frequency-dependent reflecting properties within the signal bandwidth. We show that, with an appropriate design of the metaprism, it is possible to control that each data stream in an orthogonal frequency division multiplexing (OFDM) system is reflected in the desired directi…
▽ More
In this paper, we put forth the idea of metaprism, a passive and non-reconfigurable metasurface acting as a metamirror with frequency-dependent reflecting properties within the signal bandwidth. We show that, with an appropriate design of the metaprism, it is possible to control that each data stream in an orthogonal frequency division multiplexing (OFDM) system is reflected in the desired direction without the need for control channels and channel state information (CSI) estimation between the base station and the metaprism, but simply by correctly assigning subcarriers to users. Furthermore, the metaprism can also be designed so that it focuses the signal towards a specific position depending on the subcarrier, provided that it is in the near-field, with consequent path-loss reduction. A critical discussion is also presented about the path-loss gain obtainable from metaprisms and, more generally, from metasurfaces. The numerical results show that this solution is surprisingly effective in extending the coverage in areas experiencing severe non line-of-sight (NLOS) channel conditions, thus making it a very appealing alternative to reconfigurable metasurfaces when low-cost, no energy consumption, and backward compatibility with existing wireless standards are required.
△ Less
Submitted 30 March, 2020;
originally announced March 2020.
-
An Ultra-wideband Battery-less Positioning System for Space Applications
Authors:
Davide Dardari,
Nicolò Decarli,
Davide Fabbri,
Anna Guerra,
Marco Fantuzzi,
Diego Masotti,
Alessandra Costanzo,
Aldo Romani,
Maxime Drouguet,
Thomas Feuillen,
Christopher Raucy,
Luc Vandendorpe,
Christophe Craeye
Abstract:
An ultra-wide bandwidth (UWB) remote-powered positioning system for potential use in tracking floating objects inside space stations is presented. It makes use of battery-less tags that are powered-up and addressed through wireless power transfer in the UHF band and embed an energy efficient pulse generator in the 3-5 GHz UWB band. The system has been mounted on the ESA Mars Rover prototype to dem…
▽ More
An ultra-wide bandwidth (UWB) remote-powered positioning system for potential use in tracking floating objects inside space stations is presented. It makes use of battery-less tags that are powered-up and addressed through wireless power transfer in the UHF band and embed an energy efficient pulse generator in the 3-5 GHz UWB band. The system has been mounted on the ESA Mars Rover prototype to demonstrate its functionality and performance. Experimental results show the feasibility of centimeter-level localization accuracy at distances larger than 10 meters, with the capability of determining the position of multiple tags using a 2W-ERP power source in the UHF RFID frequency band.
△ Less
Submitted 2 January, 2020;
originally announced January 2020.
-
Radio Positioning with EM Processing of the Spherical Wavefront
Authors:
Francesco Guidi,
Davide Dardari
Abstract:
Next 5G and beyond applications have brought a tremendous interest towards array systems employing an extremely large number of antennas, so that the technology that might be in place for communication can be also exploited for positioning. In particular, in this paper we investigate the possibility to infer the position of an omnidirectional transmitter by retrieving the information from the inci…
▽ More
Next 5G and beyond applications have brought a tremendous interest towards array systems employing an extremely large number of antennas, so that the technology that might be in place for communication can be also exploited for positioning. In particular, in this paper we investigate the possibility to infer the position of an omnidirectional transmitter by retrieving the information from the incident spherical wavefront through its EM processing. Despite such a post-processing of the curvature wavefront has been mainly considered in the past at microwave and acoustic frequencies using extremely large antennas, it is of interest to explore the opportunities offered in the context of next 5G and beyond systems. Thus, differently from the state-of-the-art, here we first introduce a dedicated general model for different EM processing configurations, and successively we investigate the trade-off between the attainable positioning performance and the complexity offered by the different architectures, that might entail or not the use of a lens, that can be either reconfigurable or not. Indeed, we analyze also the effect of the interference, in order to evaluate the robustness of the considered system to the presence of multiple simultaneous transmitting sources. Results, obtained for different number of antennas, i.e., for different array apertures, confirm the possibility to achieve interesting positioning performance using a single antenna array with limited dimensions.
△ Less
Submitted 30 November, 2020; v1 submitted 31 December, 2019;
originally announced December 2019.
-
Communicating with Large Intelligent Surfaces: Fundamental Limits and Models
Authors:
Davide Dardari
Abstract:
This paper analyzes the optimal communication involving large intelligent surfaces (LIS) starting from electromagnetic arguments. Since the numerical solution of the corresponding eigenfunctions problem is in general computationally prohibitive, simple but accurate analytical expressions for the link gain and available spatial degrees-of-freedom (DoF) are derived. It is shown that the achievable D…
▽ More
This paper analyzes the optimal communication involving large intelligent surfaces (LIS) starting from electromagnetic arguments. Since the numerical solution of the corresponding eigenfunctions problem is in general computationally prohibitive, simple but accurate analytical expressions for the link gain and available spatial degrees-of-freedom (DoF) are derived. It is shown that the achievable DoF and gain offered by the wireless link are determined only by geometric factors, and that the classical Friis' formula is no longer valid in this scenario where the transmitter and receiver could operate in the near-field regime. Furthermore, results indicate that, contrarily to classical MIMO systems, when using LIS-based antennas DoF larger than 1 can be exploited even in strong line-of-sight (LOS) channel conditions, which corresponds to a significant increase in spatial capacity density, especially when working at millimeter waves.
△ Less
Submitted 8 June, 2020; v1 submitted 3 December, 2019;
originally announced December 2019.
-
Dynamic Radar Networks of UAVs
Authors:
Anna Guerra,
Davide Dardari,
Petar M. Djuric
Abstract:
In the incoming years, the low-aerial space will be crowded by unmanned aerial vehicles (UAVs), which will be providing different services. In this expected context, an emerging problem is to detect and track unauthorized or malicious mini/micro UAVs. In contrast to current solutions mainly based on fixed terrestrial radars, this article will put forth the idea of a dynamic radar network (DRN) com…
▽ More
In the incoming years, the low-aerial space will be crowded by unmanned aerial vehicles (UAVs), which will be providing different services. In this expected context, an emerging problem is to detect and track unauthorized or malicious mini/micro UAVs. In contrast to current solutions mainly based on fixed terrestrial radars, this article will put forth the idea of a dynamic radar network (DRN) composed of UAVs able to smartly adapt their formation-navigation control to best track malicious UAVs in real-time, with high accuracy, and in a distributed fashion. To this end, some technological solutions and the main methods for target detection and tracking will be described. Further, an optimized navigation scheme will be developed according to an information-seeking approach. Some examples of simulation results and future directions of work will be finally presented highlighting the advantages of dynamic and reconfigurable networks over static ones.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Automatic Map** of the Indoor World with Personal Radars
Authors:
Anna Guerra,
Francesco Guidi,
Gianni Pasolini,
Antonio Clemente,
Raffaele D'Errico,
Davide Dardari
Abstract:
Digital maps will revolutionize our experience of perceiving and navigating indoor environments. While today we rely only on the representation of the outdoors, the map** of indoors is mainly a part of the traditional SLAM problem where robots discover the surrounding and perform self-localization. Nonetheless, robot deployment prevents from a large diffusion and fast map** of indoors and, fur…
▽ More
Digital maps will revolutionize our experience of perceiving and navigating indoor environments. While today we rely only on the representation of the outdoors, the map** of indoors is mainly a part of the traditional SLAM problem where robots discover the surrounding and perform self-localization. Nonetheless, robot deployment prevents from a large diffusion and fast map** of indoors and, further, they are usually equipped with laser and vision technology that fail in scarce visibility conditions. To this end, a possible solution is to turn future personal devices into personal radars as a milestone towards the automatic generation of indoor maps using massive array technology at millimeter-waves, already in place for communications. In this application-oriented paper, we will describe the main achievements attained so far to develop the personal radar concept, using ad-hoc collected experimental data, and by discussing possible future directions of investigation.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Joint Indoor Localization and Navigation of UAVs for Network Formation Control
Authors:
Anna Guerra,
Davide Dardari,
Petar M. Djuric
Abstract:
In this paper, we propose a joint indoor localization and navigation algorithm to enable a swarm of unmanned aerial vehicles (UAVs) to deploy in a specific spatial formation in indoor environments. In the envisioned scenario, we consider a static user acting as a central unit whose main task is to acquire all the UAV measurements carrying position-dependent information and to estimate the UAV posi…
▽ More
In this paper, we propose a joint indoor localization and navigation algorithm to enable a swarm of unmanned aerial vehicles (UAVs) to deploy in a specific spatial formation in indoor environments. In the envisioned scenario, we consider a static user acting as a central unit whose main task is to acquire all the UAV measurements carrying position-dependent information and to estimate the UAV positions when there is no existing infrastructure for positioning. Subsequently, the user exploits the estimated positions as inputs for the navigation control with the aim of deploying the UAVs in a desired formation in space (formation sha**). The user plans the trajectory of each UAV in real time, guaranteeing a safe navigation in the presence of obstacles. The proposed algorithm guides the UAVs to their desired final locations with good accuracy.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Non-Centralized Navigation for Source Localization by Cooperative UAVs
Authors:
Anna Guerra,
Davide Dardari,
Petar M. Djuric
Abstract:
In this paper, we propose a distributed solution to the navigation of a population of unmanned aerial vehicles (UAVs) to best localize a static source. The network is considered heterogeneous with UAVs equipped with received signal strength (RSS) sensors from which it is possible to estimate the distance from the source and/or the direction of arrival through ad-hoc rotations. This diversity in ga…
▽ More
In this paper, we propose a distributed solution to the navigation of a population of unmanned aerial vehicles (UAVs) to best localize a static source. The network is considered heterogeneous with UAVs equipped with received signal strength (RSS) sensors from which it is possible to estimate the distance from the source and/or the direction of arrival through ad-hoc rotations. This diversity in gathering and processing RSS measurements mitigates the loss of localization accuracy due to the adoption of low-complexity sensors. The UAVs plan their trajectories on-the-fly and in a distributed fashion. The collected data are disseminated through the network via multi-hops, therefore being subject to latency. Since not all the paths are equal in terms of information gathering rewards, the motion planning is formulated as a minimization of the uncertainty of the source position under UAV kinematic and anti-collision constraints and performed by 3D non-linear programming. The proposed analysis takes into account non-line-of-sight (NLOS) channel conditions as well as measurement age caused by the latency constraints in communication.
△ Less
Submitted 28 October, 2019;
originally announced October 2019.
-
Efficient Distributed Non-Asymptotic Confidence Regions Computation over Wireless Sensor Networks
Authors:
Vincenzo Zambianchi,
Michel Kieffer,
Gianni Pasolini,
Francesca Bassi,
Davide Dardari
Abstract:
This paper considers the distributed computation of confidence regions tethered to multidimensional parameter estimation under linear measurement models. In particular, the considered confidence regions are non-asymptotic, this meaning that the number of required measurements is finite. Distributed solutions for the computation of non-asymptotic confidence regions are proposed, suited to wireless…
▽ More
This paper considers the distributed computation of confidence regions tethered to multidimensional parameter estimation under linear measurement models. In particular, the considered confidence regions are non-asymptotic, this meaning that the number of required measurements is finite. Distributed solutions for the computation of non-asymptotic confidence regions are proposed, suited to wireless sensor networks scenarios. Their performances are compared in terms of required traffic load, both analytically and numerically. The evidence emerging from the conducted investigations is that the best solution for information exchange depends on whether the network topology is structured or unstructured. The effect on the computation of confidence regions of information diffusion truncation is also examined. In particular, it is proven that consistent confidence regions can be computed even when an incomplete set of measurements is available.
△ Less
Submitted 29 September, 2014;
originally announced September 2014.
