-
IoT on the Road to Sustainability: Vehicle or Bandit?
Authors:
Jona Cappelle,
Liesbet Van der Perre,
Emma Fitzgerald,
Simon Ravyts,
Weronika Gajda,
Valentijn De Smedt,
Bert Cox,
Gilles Callebaut
Abstract:
The Internet of Things (IoT) can support the evolution towards a digital and green future. However, the introduction of the technology clearly has in itself a direct adverse ecological impact. This paper assesses this impact at both the IoT-node and at the network side. For the nodes, we show that the electronics production of devices comes with a carbon footprint that can be much higher than duri…
▽ More
The Internet of Things (IoT) can support the evolution towards a digital and green future. However, the introduction of the technology clearly has in itself a direct adverse ecological impact. This paper assesses this impact at both the IoT-node and at the network side. For the nodes, we show that the electronics production of devices comes with a carbon footprint that can be much higher than during operation phase. We highlight that the inclusion of IoT support in existing cellular networks comes with a significant ecological penalty, raising overall energy consumption by more than 15%. These results call for novel design approaches for the nodes and for early consideration of the support for IoT in future networks. Raising the 'Vehicle or bandit?' question on the nature of IoT in the broader sense of sustainability, we illustrate the need for multidisciplinary cooperation to steer applications in desirable directions.
△ Less
Submitted 31 May, 2024;
originally announced May 2024.
-
Radar Resource Management for Active Tracking Using Split-Aperture Phased Arrays
Authors:
Pepijn B. Cox,
Wim L. van Rossum
Abstract:
Flexible front-end technology will become available in future multifunction radar systems to improve adaptability to the operational theatre. A potential concept to utilize this flexibility is to subdivide radar tasks spatially over the array, the so-called split-aperture phased array (SAPA) concept. As radars are generally designed for their worst-case scenario, e.g., small targets at a large ran…
▽ More
Flexible front-end technology will become available in future multifunction radar systems to improve adaptability to the operational theatre. A potential concept to utilize this flexibility is to subdivide radar tasks spatially over the array, the so-called split-aperture phased array (SAPA) concept. As radars are generally designed for their worst-case scenario, e.g., small targets at a large range, the power-aperture budget can be excessive for targets that do not fall within that class. To increase efficiency of the time budget of the radar front-end, the SAPA concept could be applied. In this paper, the SAPA concept is explored to assign radar resources for active tracking tasks of many targets. To do so, we formulate and solve the radar resource management problem for the SAPA concept by employing the quality of service based resource allocation model (Q-RAM) framework. It will be demonstrated by a simulation example that a radar can maintain a larger numbers of active tracking tasks when using the SAPA concept compared to the case that only the full array can be used per task.
△ Less
Submitted 27 February, 2024;
originally announced February 2024.
-
Kee** Energy-Neutral Devices Operational: a Coherent Massive Beamforming Approach
Authors:
Jarne Van Mulders,
Bert Cox,
Benjamin J. B. Deutschmann,
Gilles Callebaut,
Lieven de Strycker,
Liesbet Van der Perre
Abstract:
Kee** the batteries on the shelf: this is the holy grail for low-cost Internet of Things (IoT) nodes. In this paper we study the potential of radio frequency (RF)-based wireless power transfer implementing coherent beamforming with many antennas to realize this ambitious target. We optimize the deployment of the antennas to charge electronic shelf labels (ESLs), considering actual regulatory con…
▽ More
Kee** the batteries on the shelf: this is the holy grail for low-cost Internet of Things (IoT) nodes. In this paper we study the potential of radio frequency (RF)-based wireless power transfer implementing coherent beamforming with many antennas to realize this ambitious target. We optimize the deployment of the antennas to charge electronic shelf labels (ESLs), considering actual regulatory constraints. The results confirm the feasibility to create power spots that are sufficient to keep the high density of battery-less devices operational.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Physics-Based Acoustic Holograms
Authors:
Antonio Stanziola,
Ben T. Cox,
Bradley E. Treeby,
Michael D. Brown
Abstract:
Advances in additive manufacturing have enabled the realisation of inexpensive, scalable, diffractive acoustic lenses that can be used to generate complex acoustic fields via phase and/or amplitude modulation. However, the design of these holograms relies on a thin-element approximation adapted from optics which can severely limit the fidelity of the realised acoustic field. Here, we introduce phy…
▽ More
Advances in additive manufacturing have enabled the realisation of inexpensive, scalable, diffractive acoustic lenses that can be used to generate complex acoustic fields via phase and/or amplitude modulation. However, the design of these holograms relies on a thin-element approximation adapted from optics which can severely limit the fidelity of the realised acoustic field. Here, we introduce physics-based acoustic holograms with a complex internal structure. The structures are designed using a differentiable acoustic model with manufacturing constraints via optimisation of the acoustic property distribution within the hologram. The holograms can be fabricated simply and inexpensively using contemporary 3D printers. Experimental measurements demonstrate a significant improvement compared to conventional thin-element holograms.
△ Less
Submitted 5 May, 2023;
originally announced May 2023.
-
An Acoustic Simulation Framework to Support Indoor Positioning and Data Driven Signal Processing Assessments
Authors:
Daan Delabie,
Chesney Buyle,
Bert Cox,
Liesbet Van der Perre,
Lieven De Strycker
Abstract:
We present an indoor acoustic simulation framework that supports both ultrasonic and audible signaling. The framework opens the opportunity for fast indoor acoustic data generation and positioning development. The improved Pyroomacoustics-based physical model includes both an image-source model (ISM) and ray tracing method to simulate acoustic signaling in geometric spaces that extend typical shoe…
▽ More
We present an indoor acoustic simulation framework that supports both ultrasonic and audible signaling. The framework opens the opportunity for fast indoor acoustic data generation and positioning development. The improved Pyroomacoustics-based physical model includes both an image-source model (ISM) and ray tracing method to simulate acoustic signaling in geometric spaces that extend typical shoe-box rooms. Moreover, it offers the convenience to facilitate multiple speakers and microphones with different directivity patterns. In addition to temperature and air absorption, the room reverberation is taken into account characterized by the RT60 value or the combination of building materials. Additional noise sources can be added by means of post processing and/or extra speakers. Indoor positioning methods assessed in simulation are compared with real measurements in a testbed, called 'Techtile'. This analysis confirms that the simulation results are close to the measurements and form a realistic representation of the reality. The simulation framework is constructed in a modular way, and parts can be replaced or modified to support different application domains. The code is made available open source.
△ Less
Submitted 21 June, 2023; v1 submitted 4 May, 2023;
originally announced May 2023.
-
Kernel Design Meets Clutter Cancellation for Irregular Waveforms
Authors:
Pepijn B. Cox,
Mario A. Coutino,
Wim L. van Rossum
Abstract:
Efficient clutter filtering for pulsed radar systems remains an open issue when employing pulse-to-pulse modulation and irregular pulse interval waveforms within the coherent processing interval. The range and Doppler domain should be jointly processed for effective filtering leading to a large computational overhead. In this paper, the joint domain filtering is performed by constructing a clutter…
▽ More
Efficient clutter filtering for pulsed radar systems remains an open issue when employing pulse-to-pulse modulation and irregular pulse interval waveforms within the coherent processing interval. The range and Doppler domain should be jointly processed for effective filtering leading to a large computational overhead. In this paper, the joint domain filtering is performed by constructing a clutter projection matrix, also known as the projected non-identical multiple pulse compression (NIMPC) method. The paper extends the projected NIMPC filter to irregular pulse interval waveforms. Additionally, a kernel-based regularization will be introduced to tackle the ill-conditioning of the matrix inverse of the NIMPC method. The regularization is based on a model of the second-order statistics of the clutter. Moreover, a computationally efficient algorithm is formulated based on fast Fourier transforms and the projected conjugate gradient method. Through a Monte Carlo study it is demonstrated that the proposed kernelized filtering outperforms the projected NIMPC in clutter filtering.
△ Less
Submitted 20 February, 2023;
originally announced February 2023.
-
A Frequency-Velocity CNN for Develo** Near-Surface 2D Vs Images from Linear-Array, Active-Source Wavefield Measurements
Authors:
Aser Abbas,
Joseph P. Vantassel,
Brady R. Cox,
Krishna Kumar,
Jodie Crocker
Abstract:
This paper presents a frequency-velocity convolutional neural network (CNN) for rapid, non-invasive 2D shear wave velocity (Vs) imaging of near-surface geo-materials. Operating in the frequency-velocity domain allows for significant flexibility in the linear-array, active-source experimental testing configurations used for generating the CNN input, which are normalized dispersion images. Unlike wa…
▽ More
This paper presents a frequency-velocity convolutional neural network (CNN) for rapid, non-invasive 2D shear wave velocity (Vs) imaging of near-surface geo-materials. Operating in the frequency-velocity domain allows for significant flexibility in the linear-array, active-source experimental testing configurations used for generating the CNN input, which are normalized dispersion images. Unlike wavefield images, normalized dispersion images are relatively insensitive to the experimental testing configuration, accommodating various source types, source offsets, numbers of receivers, and receiver spacings. We demonstrate the effectiveness of the frequency-velocity CNN by applying it to a classic near-surface geophysics problem, namely, imaging a two-layer, undulating, soil-over-bedrock interface. This problem was recently investigated in our group by develo** a time-distance CNN, which showed great promise but lacked flexibility in utilizing different field-testing configurations. Herein, the new frequency-velocity CNN is shown to have comparable accuracy to the time-distance CNN while providing greater flexibility to handle varied field applications. The frequency-velocity CNN was trained, validated, and tested using 100,000 synthetic near-surface models. The ability of the proposed frequency-velocity CNN to generalize across various acquisition configurations is first tested using synthetic near-surface models with different acquisition configurations from that of the training set, and then applied to experimental field data collected at the Hornsby Bend site in Austin, Texas, USA. When fully developed for a wider range of geological conditions, the proposed CNN may ultimately be used as a rapid, end-to-end alternative for current pseudo-2D surface wave imaging techniques or to develop starting models for full waveform inversion.
△ Less
Submitted 19 July, 2022;
originally announced July 2022.
-
j-Wave: An open-source differentiable wave simulator
Authors:
Antonio Stanziola,
Simon R. Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
We present an open-source differentiable acoustic simulator, j-Wave, which can solve time-varying and time-harmonic acoustic problems. It supports automatic differentiation, which is a program transformation technique that has many applications, especially in machine learning and scientific computing. j-Wave is composed of modular components that can be easily customized and reused. At the same ti…
▽ More
We present an open-source differentiable acoustic simulator, j-Wave, which can solve time-varying and time-harmonic acoustic problems. It supports automatic differentiation, which is a program transformation technique that has many applications, especially in machine learning and scientific computing. j-Wave is composed of modular components that can be easily customized and reused. At the same time, it is compatible with some of the most popular machine learning libraries, such as JAX and TensorFlow. The accuracy of the simulation results for known configurations is evaluated against the widely used k-Wave toolbox and a cohort of acoustic simulation software. j-Wave is available from https://github.com/ucl-bug/jwave.
△ Less
Submitted 30 June, 2022;
originally announced July 2022.
-
Techtile: a Flexible Testbed for Distributed Acoustic Indoor Positioning and Sensing
Authors:
Daan Delabie,
Bert Cox,
Lieven De Strycker,
Liesbet Van der Perre
Abstract:
The proposed infrastructure, named Techtile, provides a unique R&D facility as features dispersed electronics enables transmission and capturing of a multitude of signals in 3D. Specific available equipment that enhances the design process from smooth prototy** to a commercial product is discussed. The acoustic parameters of the room, particularly the reverberation and ambient noise, are measure…
▽ More
The proposed infrastructure, named Techtile, provides a unique R&D facility as features dispersed electronics enables transmission and capturing of a multitude of signals in 3D. Specific available equipment that enhances the design process from smooth prototy** to a commercial product is discussed. The acoustic parameters of the room, particularly the reverberation and ambient noise, are measured to take these into account for future innovative acoustic indoor positioning and sensing systems. This can have a positive influence on the accuracy and precision. The wooden construction represents an acoustically challenging room for audible sound with a maximum measured RT60 value of 1.17s at 5kHz, which is comparable to the reverberation properties of a lecture or small concert hall. For ultrasound it is rather challenging due to the present ambient noise sources. In general, the Techtile room can be compared with a home or quiet office environment, in terms of sound pressure levels (SPLs). In addition to the acoustic properties, possible research and development options are discussed in combination with the associated challenges. Many of the designs described are available through open source.
△ Less
Submitted 8 September, 2022; v1 submitted 13 April, 2022;
originally announced April 2022.
-
Techtile -- Open 6G R&D Testbed for Communication, Positioning, Sensing, WPT and Federated Learning
Authors:
Gilles Callebaut,
Jarne Van Mulders,
Geoffrey Ottoy,
Daan Delabie,
Bert Cox,
Nobby Stevens,
Liesbet Van der Perre
Abstract:
New concepts for next-generation wireless systems are being developed. It is expected that these 6G and beyond systems will incorporate more than only communication, but also sensing, positioning, (deep) edge computing, and other services. The discussed measurement facility and approach, named Techtile, is an open, both in design and operation, and unique testbed to evaluate these newly envisioned…
▽ More
New concepts for next-generation wireless systems are being developed. It is expected that these 6G and beyond systems will incorporate more than only communication, but also sensing, positioning, (deep) edge computing, and other services. The discussed measurement facility and approach, named Techtile, is an open, both in design and operation, and unique testbed to evaluate these newly envisioned systems. Techtile is a multi-functional and versatile testbed, providing fine-grained distributed resources for new communication, positioning and sensing technologies. The facility enables experimental research on hyper-connected interactive environments and validation of new algorithms and topologies. The backbone connects 140~resource units equipped with edge computing devices, software-defined radios, sensors, and LED sources. By doing so, different network topologies and local-versus-central computing can be assessed. The introduced diversity of i) the technologies (e.g., RF, acoustics and light), ii) the distributed resources and iii) the interconnectivity allows exploring more degrees and new types of diversity, which can be investigated in this testbed.
△ Less
Submitted 9 February, 2022;
originally announced February 2022.
-
A Multi-band Solution for Interacting with Energy-Neutral Devices
Authors:
Chesney Buyle,
Bert Cox,
Liesbet Van der Perre,
Lieven De Strycker
Abstract:
RF Wireless Power Transfer (WPT) emerges as a technology for charging autonomous devices, enabling simultaneous power and information transfer. However, with increasing distance, single-input, single-channel rectenna systems are not able to meet the power requirements of large scale IoT applications. In this paper, we tackle this problem on two levels. First, we minimize the energy consumption at…
▽ More
RF Wireless Power Transfer (WPT) emerges as a technology for charging autonomous devices, enabling simultaneous power and information transfer. However, with increasing distance, single-input, single-channel rectenna systems are not able to meet the power requirements of large scale IoT applications. In this paper, we tackle this problem on two levels. First, we minimize the energy consumption at the energy-constrained device on three levels. Second, we evolve to a dual-band solution increasing RF WPT. One frequency band is used to provide a base charge to many nodes in a shared transmission. Beam steering, on the other hand, allows for more power hungry operations while introducing as minimal interference as possible. We showcase this method for a hybrid RF-acoustic positioning system. Practical measurements conducted in a multi-antenna indoor testbed (Techtile) show the additional power gain and positioning rate.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
LPVcore: MATLAB Toolbox for LPV Modelling, Identification and Control
Authors:
P. den Boef,
P. B. Cox,
R. Tóth
Abstract:
This paper describes the LPVcore software package for MATLAB developed to model, simulate, estimate and control systems via linear parameter-varying (LPV) input-output (IO), state-space (SS) and linear fractional (LFR) representations. In the LPVcore toolbox, basis affine parameter-varying matrix functions are implemented to enable users to represent LPV systems in a global setting, i.e., for time…
▽ More
This paper describes the LPVcore software package for MATLAB developed to model, simulate, estimate and control systems via linear parameter-varying (LPV) input-output (IO), state-space (SS) and linear fractional (LFR) representations. In the LPVcore toolbox, basis affine parameter-varying matrix functions are implemented to enable users to represent LPV systems in a global setting, i.e., for time-varying scheduling trajectories. This is a key difference compared to other software suites that use a grid or only LFR-based representations. The paper contains an overview of functions in the toolbox to simulate and identify IO, SS and LFR representations. Based on various prediction-error minimization methods, a comprehensive example is given on the identification of a DC motor with an unbalanced disc, demonstrating the capabilities of the toolbox. The software and examples are available on www.lpvcore.net.
△ Less
Submitted 8 May, 2021;
originally announced May 2021.
-
Energy Neutral Devices: Can Hybrid RF Acoustic Signals Point Them Out?
Authors:
Bert Cox,
Chesney Buyle,
Liesbet Van der Perre,
Lieven De Strycker
Abstract:
We present a hybrid signaling approach to position energy-neutral devices. Our method combines the best of two worlds: instant RF signals for both communication and energy transfer, and slower propagating acoustic waves for accurate distance measurements. We introduce advanced energy loading of an 'E-buffer' through beamformed RF signals. The scientific contribution of our approach is twofold, adv…
▽ More
We present a hybrid signaling approach to position energy-neutral devices. Our method combines the best of two worlds: instant RF signals for both communication and energy transfer, and slower propagating acoustic waves for accurate distance measurements. We introduce advanced energy loading of an 'E-buffer' through beamformed RF signals. The scientific contribution of our approach is twofold, advancing both the positioning performance and the energy harvesting efficiency. On the one hand, we overcome current distance limitations in RF backscattering-based indoor localization. On the other hand, it enhances the energy harvesting by using the calculated position and beamforming a higher amount of directed RF energy into the mobile node. We provide a functional architecture for both sides of the system and present a proof-of-concept. Practical measurements in representative use cases show an update rate of 10 positions per hour within the regulatory constraints in the 868MHz band for distances up to 4.5 m. An energy and power model are drawn up to provide insights into the performance trade-offs.
△ Less
Submitted 3 December, 2020;
originally announced December 2020.
-
A Helmholtz equation solver using unsupervised learning: Application to transcranial ultrasound
Authors:
Antonio Stanziola,
Simon R. Arridge,
Ben T. Cox,
Bradley E. Treeby
Abstract:
Transcranial ultrasound therapy is increasingly used for the non-invasive treatment of brain disorders. However, conventional numerical wave solvers are currently too computationally expensive to be used online during treatments to predict the acoustic field passing through the skull (e.g., to account for subject-specific dose and targeting variations). As a step towards real-time predictions, in…
▽ More
Transcranial ultrasound therapy is increasingly used for the non-invasive treatment of brain disorders. However, conventional numerical wave solvers are currently too computationally expensive to be used online during treatments to predict the acoustic field passing through the skull (e.g., to account for subject-specific dose and targeting variations). As a step towards real-time predictions, in the current work, a fast iterative solver for the heterogeneous Helmholtz equation in 2D is developed using a fully-learned optimizer. The lightweight network architecture is based on a modified UNet that includes a learned hidden state. The network is trained using a physics-based loss function and a set of idealized sound speed distributions with fully unsupervised training (no knowledge of the true solution is required). The learned optimizer shows excellent performance on the test set, and is capable of generalization well outside the training examples, including to much larger computational domains, and more complex source and sound speed distributions, for example, those derived from x-ray computed tomography images of the skull.
△ Less
Submitted 18 June, 2021; v1 submitted 29 October, 2020;
originally announced October 2020.
-
Deep Learning in Photoacoustic Tomography: Current approaches and future directions
Authors:
Andreas Hauptmann,
Ben Cox
Abstract:
Biomedical photoacoustic tomography, which can provide high resolution 3D soft tissue images based on the optical absorption, has advanced to the stage at which translation from the laboratory to clinical settings is becoming possible. The need for rapid image formation and the practical restrictions on data acquisition that arise from the constraints of a clinical workflow are presenting new imag…
▽ More
Biomedical photoacoustic tomography, which can provide high resolution 3D soft tissue images based on the optical absorption, has advanced to the stage at which translation from the laboratory to clinical settings is becoming possible. The need for rapid image formation and the practical restrictions on data acquisition that arise from the constraints of a clinical workflow are presenting new image reconstruction challenges. There are many classical approaches to image reconstruction, but ameliorating the effects of incomplete or imperfect data through the incorporation of accurate priors is challenging and leads to slow algorithms. Recently, the application of Deep Learning, or deep neural networks, to this problem has received a great deal of attention. This paper reviews the literature on learned image reconstruction, summarising the current trends, and explains how these new approaches fit within, and to some extent have arisen from, a framework that encompasses classical reconstruction methods. In particular, it shows how these new techniques can be understood from a Bayesian perspective, providing useful insights. The paper also provides a concise tutorial demonstration of three prototypical approaches to learned image reconstruction. The code and data sets for these demonstrations are available to researchers. It is anticipated that it is in in vivo applications - where data may be sparse, fast imaging critical and priors difficult to construct by hand - that Deep Learning will have the most impact. With this in mind, the paper concludes with some indications of possible future research directions.
△ Less
Submitted 16 September, 2020;
originally announced September 2020.
-
Linear Parameter-Varying Subspace Identification: A Unified Framework
Authors:
P. B. Cox,
R. Tóth
Abstract:
In this paper, we establish a unified framework for subspace identification (SID) of linear parameter-varying (LPV) systems to estimate LPV state-space (SS) models in innovation form. This framework enables us to derive novel LPV SID schemes that are extensions of existing linear time-invariant (LTI) methods. More specifically, we derive the open-loop, closed-loop, and predictor-based data-equatio…
▽ More
In this paper, we establish a unified framework for subspace identification (SID) of linear parameter-varying (LPV) systems to estimate LPV state-space (SS) models in innovation form. This framework enables us to derive novel LPV SID schemes that are extensions of existing linear time-invariant (LTI) methods. More specifically, we derive the open-loop, closed-loop, and predictor-based data-equations, an input-output surrogate form of the SS representation, by systematically establishing an LPV subspace identification theory. We show the additional challenges of the LPV setting compared to the LTI case. Based on the data-equations, several methods are proposed to estimate LPV-SS models based on a maximum-likelihood or a realization based argument. Furthermore, the established theoretical framework for the LPV subspace identification problem allows us to lower the number of to-be-estimated parameters and to overcome dimensionality problems of the involved matrices, leading to a decrease in the computational complexity of LPV SIDs in general. To the authors' knowledge, this paper is the first in-depth examination of the LPV subspace identification problem. The effectiveness of the proposed subspace identification methods are demonstrated and compared with existing methods in a Monte Carlo study of identifying a benchmark MIMO LPV system.
△ Less
Submitted 7 August, 2020;
originally announced August 2020.
-
Towards accurate quantitative photoacoustic imaging: learning vascular blood oxygen saturation in 3D
Authors:
Ciaran Bench,
Andreas Hauptmann,
Ben Cox
Abstract:
Significance: 2D fully convolutional neural networks have been shown capable of producing maps of sO$_2$ from 2D simulated images of simple tissue models. However, their potential to produce accurate estimates in vivo is uncertain as they are limited by the 2D nature of the training data when the problem is inherently 3D, and they have not been tested with realistic images.
Aim: To demonstrate t…
▽ More
Significance: 2D fully convolutional neural networks have been shown capable of producing maps of sO$_2$ from 2D simulated images of simple tissue models. However, their potential to produce accurate estimates in vivo is uncertain as they are limited by the 2D nature of the training data when the problem is inherently 3D, and they have not been tested with realistic images.
Aim: To demonstrate the capability of deep neural networks to process whole 3D images and output 3D maps of vascular sO$_2$ from realistic tissue models/images.
Approach: Two separate fully convolutional neural networks were trained to produce 3D maps of vascular blood oxygen saturation and vessel positions from multiwavelength simulated images of tissue models.
Results: The mean of the absolute difference between the true mean vessel sO$_2$ and the network output for 40 examples was 4.4% and the standard deviation was 4.5%.
Conclusions: 3D fully convolutional networks were shown capable of producing accurate sO$_2$ maps using the full extent of spatial information contained within 3D images generated under conditions mimicking real imaging scenarios. This work demonstrates that networks can cope with some of the confounding effects present in real images such as limited-view artefacts, and have the potential to produce accurate estimates in vivo.
△ Less
Submitted 3 May, 2020;
originally announced May 2020.
-
High Precision Hybrid RF and Ultrasonic Chirp-based Ranging for Low-Power IoT Nodes
Authors:
Bert Cox,
Liesbet Van der Perre,
Stijn Wielandt,
Geoffrey Ottoy,
Lieven De Strycker
Abstract:
Hybrid acoustic-RF systems offer excellent ranging accuracy, yet they typically come at a power consumption that is too high to meet the energy constraints of mobile IoT nodes. We combine pulse compression and synchronized wake-ups to achieve a ranging solution that limits the active time of the nodes to 1 ms. Hence, an ultra low-power consumption of 9.015 μW for a single measurement is achieved.…
▽ More
Hybrid acoustic-RF systems offer excellent ranging accuracy, yet they typically come at a power consumption that is too high to meet the energy constraints of mobile IoT nodes. We combine pulse compression and synchronized wake-ups to achieve a ranging solution that limits the active time of the nodes to 1 ms. Hence, an ultra low-power consumption of 9.015 μW for a single measurement is achieved. Measurements based on a proof-of-concept hardware platform show median distance error values below 10 cm. Both simulations and measurements demonstrate that the accuracy is reduced at low signal-to-noise ratios and when reflections occur. We introduce three methods that enhance the distance measurements at a low extra processing power cost. Hence, we validate in realistic environments that the centimeter accuracy can be obtained within the energy budget of mobile devices and IoT nodes. The proposed hybrid signal ranging system can be extended to perform accurate, low-power indoor positioning.
△ Less
Submitted 9 March, 2020;
originally announced March 2020.
-
Analysing Multibeam, Cooperative, Ground Based Radar in a Bistatic Configuration
Authors:
Pepijn B. Cox,
Wim L. van Rossum
Abstract:
Recent advances in digital beam forming for phased arrays in combination with digital signal processing should enable the development of multibeam radar in a bistatic configuration. In the bistatic setting, the pulse travelling outward from the transmitter should be followed or "chased" by the receiver. During transmission, depending on the location of the transmitter, receiver, and pulse, the num…
▽ More
Recent advances in digital beam forming for phased arrays in combination with digital signal processing should enable the development of multibeam radar in a bistatic configuration. In the bistatic setting, the pulse travelling outward from the transmitter should be followed or "chased" by the receiver. During transmission, depending on the location of the transmitter, receiver, and pulse, the number of digital beams and their location at the transmitter vary. In this paper, we analyse the geometrically depending number of digital beams and the beam switching rate of the receiver needed for pulse chasing. In addition, we derive the pulse repetition frequency (PRF) for the bistatic configuration based on the desired detection range. It is shown that the PRF in the bistatic case can be increased compared to its monostatic counterpart when the distance between the transmitter and the receiver is increased. Our results are applied on the scenario of an air traffic control radar to show the feasibility of a multibeam, ground based bistatic surveillance radar. It will be demonstrated that the maximum PRF can almost be doubled and an adaptive sensing and tracking paradigm can lead to a maximum of 64 simultaneous receiver beams for the bistatic surveillance and tracking setting.
△ Less
Submitted 30 October, 2020; v1 submitted 24 February, 2020;
originally announced February 2020.
-
Towards Efficient Maximum Likelihood Estimation of LPV-SS Models
Authors:
Pepijn B. Cox,
Roland Tóth,
Mihály Petreczky
Abstract:
How to efficiently identify multiple-input multiple-output (MIMO) linear parameter-varying (LPV) discrete-time state-space (SS) models with affine dependence on the scheduling variable still remains an open question, as identification methods proposed in the literature suffer heavily from the curse of dimensionality and/or depend on over-restrictive approximations of the measured signal behaviors.…
▽ More
How to efficiently identify multiple-input multiple-output (MIMO) linear parameter-varying (LPV) discrete-time state-space (SS) models with affine dependence on the scheduling variable still remains an open question, as identification methods proposed in the literature suffer heavily from the curse of dimensionality and/or depend on over-restrictive approximations of the measured signal behaviors. However, obtaining an SS model of the targeted system is crucial for many LPV control synthesis methods, as these synthesis tools are almost exclusively formulated for the aforementioned representation of the system dynamics. Therefore, in this paper, we tackle the problem by combining state-of-the-art LPV input-output (IO) identification methods with an LPV-IO to LPV-SS realization scheme and a maximum likelihood refinement step. The resulting modular LPV-SS identification approach achieves statical efficiency with a relatively low computational load. The method contains the following three steps: 1) estimation of the Markov coefficient sequence of the underlying system using correlation analysis or Bayesian impulse response estimation, then 2) LPV-SS realization of the estimated coefficients by using a basis reduced Ho-Kalman method, and 3) refinement of the LPV-SS model estimate from a maximum-likelihood point of view by a gradient-based or an expectation-maximization optimization methodology. The effectiveness of the full identification scheme is demonstrated by a Monte Carlo study where our proposed method is compared to existing schemes for identifying a MIMO LPV system.
△ Less
Submitted 5 August, 2018;
originally announced August 2018.
-
Approximate k-space models and Deep Learning for fast photoacoustic reconstruction
Authors:
Andreas Hauptmann,
Ben Cox,
Felix Lucka,
Nam Huynh,
Marta Betcke,
Paul Beard,
Simon Arridge
Abstract:
We present a framework for accelerated iterative reconstructions using a fast and approximate forward model that is based on k-space methods for photoacoustic tomography. The approximate model introduces aliasing artefacts in the gradient information for the iterative reconstruction, but these artefacts are highly structured and we can train a CNN that can use the approximate information to perfor…
▽ More
We present a framework for accelerated iterative reconstructions using a fast and approximate forward model that is based on k-space methods for photoacoustic tomography. The approximate model introduces aliasing artefacts in the gradient information for the iterative reconstruction, but these artefacts are highly structured and we can train a CNN that can use the approximate information to perform an iterative reconstruction. We show feasibility of the method for human in-vivo measurements in a limited-view geometry. The proposed method is able to produce superior results to total variation reconstructions with a speed-up of 32 times.
△ Less
Submitted 9 July, 2018;
originally announced July 2018.
-
Affine Parameter-Dependent Lyapunov Functions for LPV Systems with Affine Dependence
Authors:
Pepijn B. Cox,
Siep Weiland,
Roland Tóth
Abstract:
This paper deals with the certification problem for robust quadratic stability, robust state convergence, and robust quadratic performance of linear systems that exhibit bounded rates of variation in their parameters. We consider both continuous-time (CT) and discrete-time (DT) parameter-varying systems. In this paper, we provide a uniform method for this certification problem in both cases and we…
▽ More
This paper deals with the certification problem for robust quadratic stability, robust state convergence, and robust quadratic performance of linear systems that exhibit bounded rates of variation in their parameters. We consider both continuous-time (CT) and discrete-time (DT) parameter-varying systems. In this paper, we provide a uniform method for this certification problem in both cases and we show that, contrary to what was claimed previously, the DT case requires a significantly different treatment compared to the existing CT results. In the established uniform approach, quadratic Lyapunov functions, that are affine in the parameter, are used to certify robust stability, robust convergence rates, and robust performance in terms of linear matrix inequality feasibility tests. To exemplify the procedure, we solve the certification problem for $\mathscr{L}_2$-gain performance both in the CT and the DT cases. A numerical example is given to show that the proposed approach is less conservative than a method with slack variables.
△ Less
Submitted 5 April, 2018; v1 submitted 30 March, 2018;
originally announced March 2018.
-
On the Connection Between Different Noise Structures for LPV-SS Models
Authors:
Pepijn Bastiaan Cox,
Roland Tóth
Abstract:
Different representations to describe noise processes and finding connections or equivalence between them have been part of active research for decades, in particular for linear time-invariant case. In this paper the linear parameter-varying (LPV) setting is addressed; starting with the connection between an LPV state-space (SS) representation with a general noise structure and the LPV-SS model in…
▽ More
Different representations to describe noise processes and finding connections or equivalence between them have been part of active research for decades, in particular for linear time-invariant case. In this paper the linear parameter-varying (LPV) setting is addressed; starting with the connection between an LPV state-space (SS) representation with a general noise structure and the LPV-SS model in an innovation structure, i.e., the Kalman filter. More specifically, the considered LPV-SS representation with general noise structure has static, affine dependence on the scheduling signal; however, we show that its companion innovation structure has a dynamic, rational dependency structure. Following, we would like to highlight the consequences of approximating this Kalman gain by a static, affine dependency structure. To this end, firstly, we use the "fading memory" effect of the Kalman filter to reason how the Kalman gain can be approximated to depend only on a partial trajectory of the scheduling signal. This effect is shown by proving an asymptotically decreasing error upper bound on the covariance matrix associated to the innovation structure in case the covariance matrix is subjected to an incorrect initialization or disturbance. Secondly, we show by an example that an LPV-SS representation that has dynamical, rational dependency on the scheduling signal can be transformed into static, affinely dependent representation by introducing additional states. Therefore, an approximated Kalman gain can, in some cases, be represented by a static, affine Kalman gain at the cost of additional states.
△ Less
Submitted 28 October, 2016;
originally announced October 2016.
-
Alternative Form of Predictor Based Identification of LPV-SS Models with Innovation Noise
Authors:
Pepijn B. Cox,
Roland Tóth
Abstract:
In this paper, we present an approach to identify linear parameter-varying (LPV) systems with a state-space (SS) model structure in an innovation form where the coefficient functions have static and affine dependency on the scheduling signal. With this scheme, the curse of dimensionality problem is reduced, compared to existing predictor based LPV subspace identification schemes. The investigated…
▽ More
In this paper, we present an approach to identify linear parameter-varying (LPV) systems with a state-space (SS) model structure in an innovation form where the coefficient functions have static and affine dependency on the scheduling signal. With this scheme, the curse of dimensionality problem is reduced, compared to existing predictor based LPV subspace identification schemes. The investigated LPV-SS model is reformulated into an equivalent impulse response form, which turns out to be a moving average with exogenous inputs (MAX) system. The Markov coefficient functions of the LPV-MAX representation are multi-linear in the scheduling signal and its time-shifts, contrary to the predictor based schemes where the corresponding LPV auto-regressive with exogenous inputs system is multi-quadratic in the scheduling signal and its time-shifts. In this paper, we will prove that under certain conditions on the input and scheduling signals, the $\ell_2$ loss function of the one-step-ahead prediction error for the LPV-MAX model has only one unique minimum, corresponding to the original underlying system. Hence, identifying the LPV-MAX model in the prediction error minimization framework will be consistent and unbiased. The LPV-SS model is realized by applying an efficient basis reduced Ho-Kalman realization on the identified LPV-MAX model. The performance of the proposed scheme is assessed on a Monte Carlo simulation study.
△ Less
Submitted 23 September, 2016;
originally announced September 2016.