-
A New Architecture for Energy Efficient Fault Detection Using Energy Harvesters
Authors:
Dongti Zhang,
Patricio Peralta-Braz,
Chun Tung Chou,
Elena Atroshchenko,
Mehrisadat Makki Alamdari,
Mahbub Hassan
Abstract:
The current battery-powered fault detection system for vibration monitoring has a rather limited lifetime. This is because the high-frequency sampling (typically tens of kilo-Hertz) required for vibration monitoring results in high energy consumption in both the analog-to-digital (ADC) converter and wireless transmissions. This paper proposes a new fault detection architecture that can significant…
▽ More
The current battery-powered fault detection system for vibration monitoring has a rather limited lifetime. This is because the high-frequency sampling (typically tens of kilo-Hertz) required for vibration monitoring results in high energy consumption in both the analog-to-digital (ADC) converter and wireless transmissions. This paper proposes a new fault detection architecture that can significantly reduce the energy consumption of the ADC and wireless transmission. Our inspiration for the new architecture is based on the observation that the many tens of thousand of data samples collected for fault detection are ultimately transformed into a small number of features. If we can generate these features directly without high frequency sampling, then we can avoid the the energy cost for ADC and wireless transmissions. We propose to use piezoelectric energy harvesters (which can be designed to have different frequency responses) and integrators to obtain these features in an energy-efficient manner. By using a publicly available data set for ball bearing fault detection (which was originally sampled at 51.2kHz) and piezoelectric energy harvester models, we can produce features, which when sampled at 0.33Hz, give a fault detection accuracy of 89% while reducing the sampling requirement by 4 orders-of-magnitude.
△ Less
Submitted 21 February, 2024;
originally announced February 2024.
-
Staggered Comb Reference Signal Design for Integrated Communication and Sensing
Authors:
Rui Zhang,
Shawn Tsai,
Tzu-Han Chou,
Jiaying Ren
Abstract:
Ambiguity performance is a critical criterion in radar sensor design, which indicates the ambiguities arising from multiple target estimation and detection. We considered a requirement-driven selection of OFDM reference signal (RS) patterns based on ambiguity performances for bi-static sensing in integrated communication and sensing with minimal modifications of current RSs. An RS pattern with a s…
▽ More
Ambiguity performance is a critical criterion in radar sensor design, which indicates the ambiguities arising from multiple target estimation and detection. We considered a requirement-driven selection of OFDM reference signal (RS) patterns based on ambiguity performances for bi-static sensing in integrated communication and sensing with minimal modifications of current RSs. An RS pattern with a staggering offset of a linear slope that is relatively prime to the RS comb size is suggested for standard-resolution sensing algorithms to obtain the best ambiguity performances. Moreover, an extended guard interval design is proposed to increase the maximum time delay, that is inter-symbol interference (ISI) free using post-FFT sensing algorithms. The proposed techniques are promising to extend the distance and speed without ambiguities and ISI for sensing.
△ Less
Submitted 25 April, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
OFDM Reference Signal Pattern Design Criteria for Integrated Communication and Sensing
Authors:
Rui Zhang,
Shawn Tsai,
Tzu-Han Chou,
Jiaying Ren,
Wenze Qu,
Oliver Sun
Abstract:
Ambiguity performance, which indicates the maximum detectable region for target parameter estimation, is critical to radar sensor design. Driven by ambiguity performance requirements of bi-static sensing, we propose design criteria for orthogonal frequency division multiplexing (OFDM) reference signal (RS) patterns. The design not only reduces ambiguities in both time delay and Doppler shift domai…
▽ More
Ambiguity performance, which indicates the maximum detectable region for target parameter estimation, is critical to radar sensor design. Driven by ambiguity performance requirements of bi-static sensing, we propose design criteria for orthogonal frequency division multiplexing (OFDM) reference signal (RS) patterns. The design not only reduces ambiguities in both time delay and Doppler shift domains under different types of sensing algorithms, but also reduces resource overhead for integrated comunication and sensing. With minimal modifications of post-FFT processing for current RS patterns, guard interval is extended beyond conventional cyclic prefix (CP), while maintaining inter-symbol-interference-(ISI)-free delay estimation. For standard-resolution sensing algorithms, a staggering offset of a linear slope that is relatively prime to the RS comb size is suggested. As for high-resolution sensing algorithms, necessary and sufficient conditions of comb RS staggering offsets, plus new patterns synthesized therefrom, are derived for the corresponding achievable ambiguity performance. Furthermore, we generalize the RS pattern design criterion for high-resolution sensing algorithms to irregular forms, which minimizes number of resource elements (REs) for associated algorithms to eliminate all side peaks. Starting from staggered comb pattern in current positioning RS, our generalized design eventually removes any regular form for ultimate flexibility. Overall, the proposed techniques are promising to extend the ISI- and ambiguity-free range of distance and speed estimates for radar sensing.
△ Less
Submitted 25 April, 2024; v1 submitted 17 January, 2024;
originally announced January 2024.
-
Compressed Training for Dual-Wideband Time-Varying Sub-Terahertz Massive MIMO
Authors:
Tzu-Hsuan Chou,
Nicolo Michelusi,
David J. Love,
James V. Krogmeier
Abstract:
6G operators may use millimeter wave (mmWave) and sub-terahertz (sub-THz) bands to meet the ever-increasing demand for wireless access. Sub-THz communication comes with many existing challenges of mmWave communication and adds new challenges associated with the wider bandwidths, more antennas, and harsher propagations. Notably, the frequency- and spatial-wideband (dual-wideband) effects are signif…
▽ More
6G operators may use millimeter wave (mmWave) and sub-terahertz (sub-THz) bands to meet the ever-increasing demand for wireless access. Sub-THz communication comes with many existing challenges of mmWave communication and adds new challenges associated with the wider bandwidths, more antennas, and harsher propagations. Notably, the frequency- and spatial-wideband (dual-wideband) effects are significant at sub-THz. This paper presents a compressed training framework to estimate the time-varying sub-THz MIMO-OFDM channels. A set of frequency-dependent array response matrices are constructed, enabling channel recovery from multiple observations across subcarriers via multiple measurement vectors (MMV). Using the temporal correlation, MMV least squares (LS) is designed to estimate the channel based on the previous beam support, and MMV compressed sensing (CS) is applied to the residual signal. We refer to this as the MMV-LS-CS framework. Two-stage (TS) and MMV FISTA-based (M-FISTA) algorithms are proposed for the MMV-LS-CS framework. Leveraging the spreading loss structure, a channel refinement algorithm is proposed to estimate the path coefficients and time delays of the dominant paths. To reduce the computational complexity and enhance the beam resolution, a sequential search method using hierarchical codebooks is developed. Numerical results demonstrate the improved channel estimation accuracy of MMV-LS-CS over state-of-the-art techniques.
△ Less
Submitted 20 February, 2023; v1 submitted 4 January, 2022;
originally announced January 2022.
-
Fast Position-Aided MIMO Beam Training via Noisy Tensor Completion
Authors:
Tzu-Hsuan Chou,
Nicolo Michelusi,
David J. Love,
James V. Krogmeier
Abstract:
In this paper, a data-driven position-aided approach is proposed to reduce the training overhead in MIMO systems, by leveraging side information and on-the-field measurements. A data tensor is constructed by collecting beam-training measurements on a subset of positions and beams, and a hybrid noisy tensor completion (HNTC) algorithm is proposed to predict the received power across the coverage ar…
▽ More
In this paper, a data-driven position-aided approach is proposed to reduce the training overhead in MIMO systems, by leveraging side information and on-the-field measurements. A data tensor is constructed by collecting beam-training measurements on a subset of positions and beams, and a hybrid noisy tensor completion (HNTC) algorithm is proposed to predict the received power across the coverage area, which exploits both the spatial smoothness and the low-rank property of MIMO channels. A recommendation algorithm based on the completed tensor, beam subset selection (BSS), is proposed to achieve fast and accurate beam-training. Besides, a grou**-based BSS algorithm is proposed to combat the detrimental effect of noisy positional information. Numerical results evaluated with the Quadriga channel simulator at 60 GHz millimeter-wave channels show that the proposed BSS recommendation algorithm in combination with HNTC achieve accurate received power predictions, enabling beam-alignment with small overhead: given power measurements on 40% of possible discretized positions, HNTC-based BSS attains a probability of correct alignment of 91%, with only 2% of trained beams, as opposed to a state-of-the-art position-aided beam-alignment scheme which achieves 54% correct alignment in the same configuration. Finally, an online HNTC method via warm-start is proposed, that alleviates the computational complexity by 50%, with no degradation in prediction accuracy.
△ Less
Submitted 5 August, 2020;
originally announced August 2020.
-
Millimeter Wave Beam Recommendation via Tensor Completion
Authors:
Tzu-Hsuan Chou,
Nicolo Michelusi,
David J. Love,
James V. Krogmeier
Abstract:
Accurate and fast beam-alignment is essential to cope with the fast-varying environment in millimeter-wave communications. A data-driven approach is a promising solution to reduce the training overhead by leveraging side information and on-the-field measurements. In this work, a two-stage tensor completion algorithm is proposed to predict the received power on a set of possible users' positions, g…
▽ More
Accurate and fast beam-alignment is essential to cope with the fast-varying environment in millimeter-wave communications. A data-driven approach is a promising solution to reduce the training overhead by leveraging side information and on-the-field measurements. In this work, a two-stage tensor completion algorithm is proposed to predict the received power on a set of possible users' positions, given received power measurements on a small subset of positions. Based on these predictions and on positional side information, a small subset of beams is recommended to reduce the training overhead of beam-alignment. Numerical results evaluated with the Quadriga channel simulator demonstrate that the proposed algorithm achieves correct alignment with high probability using small training overhead: given power measurement on only 20% of the possible positions when using a discrete coverage area, our algorithm attains a probability of correct alignment of 80%, with only 2% of trained beams, as opposed to a state-of-the-art scheme which achieves 50% correct alignment in the same configuration. To the best of our knowledge, this is the first work to consider the beam recommendation problem based on measurements collected on a small subset of positions.
△ Less
Submitted 5 March, 2020; v1 submitted 17 June, 2019;
originally announced June 2019.
