-
Fronthaul Quantization-Aware MU-MIMO Precoding for Sum Rate Maximization
Authors:
Yasaman Khorsandmanesh,
Emil Björnson,
Joakim Jaldén
Abstract:
This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the precoding matrix is selected in a baseband unit (BBU) and then sent over a digital fronthaul to the transmitting antenna array. The fronthaul has a limited bit resolution with a known quantization behavior. We formulate a new sum rate maximization problem where the precoding matrix elements must comply with…
▽ More
This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the precoding matrix is selected in a baseband unit (BBU) and then sent over a digital fronthaul to the transmitting antenna array. The fronthaul has a limited bit resolution with a known quantization behavior. We formulate a new sum rate maximization problem where the precoding matrix elements must comply with the quantizer. We solve this non-convex mixed-integer problem to local optimality by a novel iterative algorithm inspired by the classical weighted minimum mean square error (WMMSE) approach. The precoding optimization subproblem becomes an integer least-squares problem, which we solve with a new algorithm using a sphere decoding (SD) approach. We show numerically that the proposed precoding technique vastly outperforms the baseline of optimizing an infinite-resolution precoder and then quantizing it. We also develop a heuristic quantization-aware precoding that outperforms the baseline while having comparable complexity.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
MSE Minimization in RIS-Aided MU-MIMO with Discrete Phase Shifts and Fronthaul Quantization
Authors:
Parisa Ramezani,
Yasaman Khorsandmanesh,
Emil Björnson
Abstract:
In this paper, we consider a downlink multi-user multiple-input multiple-output (MU-MIMO) communication assisted by a reconfigurable intelligent surface (RIS) and study the precoding and RIS configuration design under practical system constraints. These constraints include the limited-capacity fronthaul at the transmitter side and the finite resolution of RIS elements. We investigate the sum mean…
▽ More
In this paper, we consider a downlink multi-user multiple-input multiple-output (MU-MIMO) communication assisted by a reconfigurable intelligent surface (RIS) and study the precoding and RIS configuration design under practical system constraints. These constraints include the limited-capacity fronthaul at the transmitter side and the finite resolution of RIS elements. We investigate the sum mean squared error (MSE) minimization problem and propose an algorithm based on the block coordinate descent method to optimize the precoding, RIS configuration, and receiver gains. We compute the precoding vectors and RIS configuration using the Schnorr-Euchner sphere decoding (SESD) method which delivers the optimal MSE-minimizing solution. We numerically evaluate the performance of the proposed SESD-based methods and corroborate their effectiveness in improving the system performance.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Near-Field Localization and Sensing with Large-Aperture Arrays: From Signal Modeling to Processing
Authors:
Zhaolin Wang,
Parisa Ramezani,
Yuanwei Liu,
Emil Björnson
Abstract:
The signal processing community is currently witnessing a growing interest in near-field signal processing, driven by the trend towards the use of large aperture arrays with high spatial resolution in the fields of communication, localization, sensing, imaging, etc. From the perspective of localization and sensing, this trend breaks the basic far-field assumptions that have dominated the array sig…
▽ More
The signal processing community is currently witnessing a growing interest in near-field signal processing, driven by the trend towards the use of large aperture arrays with high spatial resolution in the fields of communication, localization, sensing, imaging, etc. From the perspective of localization and sensing, this trend breaks the basic far-field assumptions that have dominated the array signal processing research in the past, presenting new challenges and promising opportunities.
△ Less
Submitted 16 June, 2024;
originally announced June 2024.
-
Spatial Correlation Modeling and RS-LS Estimation of Near-Field Channels with Uniform Planar Arrays
Authors:
Özlem Tuğfe Demir,
Alva Kosasih,
Emil Björnson
Abstract:
Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is cr…
▽ More
Extremely large aperture arrays (ELAAs) can offer massive spatial multiplexing gains in the radiative near-field region in beyond 5G systems. While near-field channel modeling for uniform linear arrays has been extensively explored in the literature, uniform planar arrays-despite their advantageous form factor-have been somewhat neglected due to their more complex nature. Spatial correlation is crucial for non-line-of-sight channel modeling. Unlike far-field scenarios, the spatial correlation properties of near-field channels have not been thoroughly investigated. In this paper, we start from the fundamentals and develop a near-field spatial correlation model for arbitrary spatial scattering functions. Furthermore, we derive the lower dimensional subspace where the channel vectors can exist. It is based on prior knowledge of the three-dimensional coverage region where scattering clusters exists and we derive a tractable one-dimensional integral expression. This subspace is subsequently employed in a reduced-subspace least squares (RS-LS) estimation method for near-field channels, thereby enhancing performance over the traditional least squares estimator without the need for having full spatial correlation matrix knowledge.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
Joint Discrete Precoding and RIS Optimization for RIS-Assisted MU-MIMO Communication Systems
Authors:
Parisa Ramezani,
Yasaman Khorsandmanesh,
Emil Björnson
Abstract:
This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the downlink communication between a base station (BS) and multiple user equipments (UEs) is aided by a reconfigurable intelligent surface (RIS). We study the sum-rate maximization problem with the objective of finding the optimal precoding vectors and RIS configuration. Due to fronthaul limitation, each entry…
▽ More
This paper considers a multi-user multiple-input multiple-output (MU-MIMO) system where the downlink communication between a base station (BS) and multiple user equipments (UEs) is aided by a reconfigurable intelligent surface (RIS). We study the sum-rate maximization problem with the objective of finding the optimal precoding vectors and RIS configuration. Due to fronthaul limitation, each entry of the precoding vectors must be picked from a finite set of quantization labels. Furthermore, two scenarios for the RIS are investigated, one with continuous infinite-resolution reflection coefficients and another with discrete finite-resolution reflection coefficients. A novel framework is developed which, in contrast to the common literature that only offers sub-optimal solutions for optimization of discrete variables, is able to find the optimal solution to problems involving discrete constraints. Based on the classical weighted minimum mean square error (WMMSE), we transform the original problem into an equivalent weighted sum mean square error (MSE) minimization problem and solve it iteratively. We compute the optimal precoding vectors via an efficient algorithm inspired by sphere decoding (SD). For optimizing the discrete RIS configuration, two solutions based on the SD algorithm are developed: An optimal SD-based algorithm and a low-complexity heuristic method that can efficiently obtain RIS configuration without much loss in optimality. The effectiveness of the presented algorithms is corroborated via numerical simulations where it is shown that the proposed designs are remarkably superior to the commonly used benchmarks.
△ Less
Submitted 5 May, 2024;
originally announced May 2024.
-
Analysis of Quantization Noise Suppression Gains in Digital Phased Arrays
Authors:
Erik Kennerland,
Bengt Lindoff,
Emil Björnson
Abstract:
Digital phased arrays have often been disregarded for millimeter-wave communications since the analog-to-digital converters (ADCs) are power-hungry. In this paper, we provide a different perspective on this matter by demonstrating analytically and numerically how the ADC resolution can be reduced when using digital phased arrays. We perform a theoretical analysis of the quantization noise characte…
▽ More
Digital phased arrays have often been disregarded for millimeter-wave communications since the analog-to-digital converters (ADCs) are power-hungry. In this paper, we provide a different perspective on this matter by demonstrating analytically and numerically how the ADC resolution can be reduced when using digital phased arrays. We perform a theoretical analysis of the quantization noise characteristics for an OFDM signal received and processed by a digital phased array, using Gaussian approximation of the OFDM signal. In particular, we quantify the quantization noise suppression factor analytically and numerically. This factor describes how much the coherent combining reduces the quantization noise as a function of the number of antennas, which allows for reducing the ADC bit resolution. For instance in a 8-16 antenna digital phased array the ADC resolution can be reduced with 1-2 bits compared to the ADC required for an analog phased array.
△ Less
Submitted 1 May, 2024;
originally announced May 2024.
-
Downlink Pilots are Essential for Cell-Free Massive MIMO with Multi-Antenna Users
Authors:
Eren Berk Kama,
Junbeom Kim,
Emil Björnson
Abstract:
We consider a cell-free massive MIMO system with multiple antennas on the users and access points. In previous works, the downlink spectral efficiency (SE) has been evaluated using the hardening bound that requires no downlink pilots. This approach works well when having single-antenna users. In this paper, we show that much higher SEs can be achieved if downlink pilots are sent since the effectiv…
▽ More
We consider a cell-free massive MIMO system with multiple antennas on the users and access points. In previous works, the downlink spectral efficiency (SE) has been evaluated using the hardening bound that requires no downlink pilots. This approach works well when having single-antenna users. In this paper, we show that much higher SEs can be achieved if downlink pilots are sent since the effective channel matrix does not harden when having multi-antenna users. We propose a pilot-based downlink estimation scheme and derive a new SE expression that utilizes zero-forcing combining. We show numerically how the number of users and user antennas affects the SE.
△ Less
Submitted 29 April, 2024;
originally announced April 2024.
-
Unknown Interference Modeling for Rate Adaptation in Cell-Free Massive MIMO Networks
Authors:
Mahmoud Zaher,
Emil Björnson,
Marina Petrova
Abstract:
Co-channel interference poses a challenge in any wireless communication network where the time-frequency resources are reused over different geographical areas. The interference is particularly diverse in cell-free massive multiple-input multiple-output (MIMO) networks, where a large number of user equipments (UEs) are multiplexed by a multitude of access points (APs) on the same time-frequency re…
▽ More
Co-channel interference poses a challenge in any wireless communication network where the time-frequency resources are reused over different geographical areas. The interference is particularly diverse in cell-free massive multiple-input multiple-output (MIMO) networks, where a large number of user equipments (UEs) are multiplexed by a multitude of access points (APs) on the same time-frequency resources. For realistic and scalable network operation, only the interference from UEs belonging to the same serving cluster of APs can be estimated in real-time and suppressed by precoding/combining. As a result, the unknown interference arising from scheduling variations in neighboring clusters makes the rate adaptation hard and can lead to outages. This paper aims to model the unknown interference power in the uplink of a cell-free massive MIMO network. The results show that the proposed method effectively describes the distribution of the unknown interference power and provides a tool for rate adaptation with guaranteed target outage.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Destructive and constructive RIS beamforming in an ISAC-multi-user MIMO network
Authors:
Steven Rivetti,
Ozlem Tugfe Demir,
Emil Bjornson,
Mikael Skoglund
Abstract:
Integrated sensing and communication (ISAC) has already established itself as a promising solution to the spectrum scarcity problem, even more so when paired with a reconfigurable intelligent surface (RIS) as RISs can shape the propagation environment by adjusting their phase-shift coefficients. Albeit the potential performance gain, a RIS also poses a security threat to the system: in this paper,…
▽ More
Integrated sensing and communication (ISAC) has already established itself as a promising solution to the spectrum scarcity problem, even more so when paired with a reconfigurable intelligent surface (RIS) as RISs can shape the propagation environment by adjusting their phase-shift coefficients. Albeit the potential performance gain, a RIS also poses a security threat to the system: in this paper, we explore both sides of the RIS presence in a multi-user MIMO (multiple-input multiple-output) ISAC network. We first develop an alternating optimization algorithm, obtaining the active and passive beamforming vectors maximizing the sensing signal-to-noise ratio (SNR) under minimum signal-to-interference-plus-noise ratio (SINR) constraints for the communication users and finite power budget. We also investigate the destructive potential of RIS by devising a RIS phase-shift optimization algorithm that minimizes sensing SNR while preserving the same minimum communication SINR previously guaranteed by the system. We further investigate the impact of the RIS's individual element failures on the system performances. The simulation results show that the RIS performance-boosting potential is as good as its destructive one and that both of our optimization strategies show some resilience towards the investigated impairments.
△ Less
Submitted 17 April, 2024;
originally announced April 2024.
-
Wideband Channel Capacity Maximization With Beyond Diagonal RIS Reflection Matrices
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Following the promising beamforming gains offered by reconfigurable intelligent surfaces (RISs), a new hardware architecture, known as \emph{beyond diagonal RIS (BD-RIS)}, has recently been proposed. This architecture enables controllable signal flows between the RIS elements, thereby providing greater design flexibility. However, the physics-imposed symmetry and orthogonality conditions on the no…
▽ More
Following the promising beamforming gains offered by reconfigurable intelligent surfaces (RISs), a new hardware architecture, known as \emph{beyond diagonal RIS (BD-RIS)}, has recently been proposed. This architecture enables controllable signal flows between the RIS elements, thereby providing greater design flexibility. However, the physics-imposed symmetry and orthogonality conditions on the non-diagonal reflection matrix make the design challenging. In this letter, we analyze how a BD-RIS can improve a wideband channel, starting from fundamental principles and deriving the capacity. Our analysis considers the effects of various channel taps and their frequency-domain characteristics. We introduce a new algorithm designed to optimize the configuration of the BD-RIS to maximize wideband capacity. The proposed algorithm has better performance than the benchmarks. A BD-RIS is beneficial compared to a conventional RIS in the absence of static path or when the Rician $κ$-factor is smaller than $10$.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Malicious Reconfigurable Intelligent Surfaces: How Impactful can Destructive Beamforming be?
Authors:
Steven Rivetti,
Ozlem Tugfe Demir,
Emil Bjornson,
Mikael Skoglund
Abstract:
Reconfigurable intelligent surfaces (RISs) have demonstrated significant potential for enhancing communication system performance if properly configured. However, a RIS might also pose a risk to the network security. In this letter, we explore the impact of a malicious RIS on a multi-user multiple-input single-output (MISO) system when the system is unaware of the RIS's malicious intentions. The o…
▽ More
Reconfigurable intelligent surfaces (RISs) have demonstrated significant potential for enhancing communication system performance if properly configured. However, a RIS might also pose a risk to the network security. In this letter, we explore the impact of a malicious RIS on a multi-user multiple-input single-output (MISO) system when the system is unaware of the RIS's malicious intentions. The objective of the malicious RIS is to degrade the \ac{SNR} of a specific \ac{UE}, with the option of preserving the SNR of the other UEs, making the attack harder to detect. To achieve this goal, we derive the optimal RIS phase-shift pattern, assuming perfect channel state information (CSI) at the hacker. We then relax this assumption by introducing CSI uncertainties and subsequently determine the RIS's phase-shift pattern using a robust optimization approach. Our simulations reveal a direct proportionality between the performance degradation caused by the malicious RIS and the number of reflective elements, along with resilience toward CSI uncertainties.
△ Less
Submitted 20 February, 2024;
originally announced February 2024.
-
Localization in Massive MIMO Networks: From Near-Field to Far-Field
Authors:
Parisa Ramezani,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Source localization is the process of estimating the location of signal sources based on the signals received at different antennas of an antenna array. It has diverse applications, ranging from radar systems and underwater acoustics to wireless communication networks. Subspace-based approaches are among the most effective techniques for source localization due to their high accuracy, with Multipl…
▽ More
Source localization is the process of estimating the location of signal sources based on the signals received at different antennas of an antenna array. It has diverse applications, ranging from radar systems and underwater acoustics to wireless communication networks. Subspace-based approaches are among the most effective techniques for source localization due to their high accuracy, with Multiple SIgnal Classification (MUSIC) and Estimation of Signal Parameters by Rotational Invariance Techniques (ESPRIT) being two prominent methods in this category. These techniques leverage the fact that the space spanned by the eigenvectors of the covariance matrix of the received signals can be divided into signal and noise subspaces, which are mutually orthogonal. Originally designed for far-field source localization, these methods have undergone several modifications to accommodate near-field scenarios as well. This chapter aims to present the foundations of MUSIC and ESPRIT algorithms and introduce some of their variations for both far-field and near-field localization by a single array of antennas. We further provide numerical examples to demonstrate the performance of the presented methods.
△ Less
Submitted 12 February, 2024;
originally announced February 2024.
-
Pilot Length Optimization with RS-LS Channel Estimation for Extremely Large Aperture Arrays
Authors:
Mert Alıcıoğlu,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Extremely large aperture arrays can enable unprecedented spatial multiplexing in beyond 5G systems due to their extremely narrow beamfocusing capabilities. However, acquiring the spatial correlation matrix to enable efficient channel estimation is a complex task due to the vast number of antenna dimensions. Recently, a new estimation method called the "reduced-subspace least squares (RS-LS) estima…
▽ More
Extremely large aperture arrays can enable unprecedented spatial multiplexing in beyond 5G systems due to their extremely narrow beamfocusing capabilities. However, acquiring the spatial correlation matrix to enable efficient channel estimation is a complex task due to the vast number of antenna dimensions. Recently, a new estimation method called the "reduced-subspace least squares (RS-LS) estimator" has been proposed for densely packed arrays. This method relies solely on the geometry of the array to limit the estimation resources. In this paper, we address a gap in the existing literature by deriving the average spectral efficiency for a certain distribution of user equipments (UEs) and a lower bound on it when using the RS-LS estimator. This bound is determined by the channel gain and the statistics of the normalized spatial correlation matrices of potential UEs but, importantly, does not require knowledge of a specific UE's spatial correlation matrix. We establish that there exists a pilot length that maximizes this expression. Additionally, we derive an approximate expression for the optimal pilot length under low signal-to-noise ratio (SNR) conditions. Simulation results validate the tightness of the derived lower bound and the effectiveness of using the optimized pilot length.
△ Less
Submitted 2 February, 2024;
originally announced February 2024.
-
Mixed Static and Reconfigurable Metasurface Deployment in Indoor Dense Spaces: How Much Reconfigurability is Needed?
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an…
▽ More
In this paper, we investigate how metasurfaces can be deployed to deliver high data rates in a millimeter-wave (mmWave) indoor dense space with many blocking objects. These surfaces can either be static metasurfaces (SMSs) that reflect with fixed phase-shifts or reconfigurable intelligent surfaces (RISs) that can reconfigure their phase-shifts to the currently served user. The latter comes with an increased power, cabling, and signaling cost. To see how reconfigurability affects the network performance, we propose an iterative algorithm based on the feasible point pursuit successive convex approximation method. We jointly optimize the types and phase-shifts of the surfaces and the time portion allocated to each user equipment to maximize the minimum data rate achieved by the network. Our numerical results demonstrate that the minimum data rate improves as more RISs are introduced but the gain diminishes after some point. Therefore, introducing more reconfigurability is not always necessary. Another result shows that to reach the same data rate achieved by using 22 SMSs, at least 18 RISs are needed. This suggests that when it is costly to deploy many RISs, as an inexpensive alternative solution, one can reach the same data rate just by densely deploying more SMSs.
△ Less
Submitted 1 February, 2024;
originally announced February 2024.
-
Parametric Near-Field Channel Estimation for Extremely Large Aperture Arrays
Authors:
Alva Kosasih,
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Accurate channel estimation is critical to fully exploit the beamforming gains when communicating with extremely large aperture arrays. The propagation distances between the user and receiver, which potentially has thousands of antennas/elements, are such that they are located in the radiative near-field region of each other when considering the Fraunhofer distance of the entire array. Therefore,…
▽ More
Accurate channel estimation is critical to fully exploit the beamforming gains when communicating with extremely large aperture arrays. The propagation distances between the user and receiver, which potentially has thousands of antennas/elements, are such that they are located in the radiative near-field region of each other when considering the Fraunhofer distance of the entire array. Therefore, it is imperative to consider near-field effects to achieve proper channel estimation. This paper proposes a parametric multi-user near-field channel estimation algorithm based on MUltiple SIgnal Classification (MUSIC) method to obtain the essential parameters describing the users' locations. We derive the estimated channel by incorporating the estimated parameters into the near-field channel model. Additionally, we implement a least-squares-based estimation corrector, resulting in a precise near-field channel estimation. Simulation results demonstrate that our proposed scheme outperforms classical least-squares and minimum mean-square error channel estimation methods in terms of normalized beamforming gain and normalized mean-square error.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Secure Spatial Signal Design for ISAC in a Cell-Free MIMO Network
Authors:
Steven Rivetti,
Emil Bjornson,
Mikael Skoglund
Abstract:
In this paper, we study a cell-free multiple-input multiple-output network equipped with integrated sensing and communication (ISAC) access points (APs). The distributed APs are used to jointly serve the communication needs of user equipments (UEs) while sensing a target, assumed to be an eavesdropper (Eve). To increase the system's robustness towards said Eve, we develop an ISAC waveform model th…
▽ More
In this paper, we study a cell-free multiple-input multiple-output network equipped with integrated sensing and communication (ISAC) access points (APs). The distributed APs are used to jointly serve the communication needs of user equipments (UEs) while sensing a target, assumed to be an eavesdropper (Eve). To increase the system's robustness towards said Eve, we develop an ISAC waveform model that includes artificial noise (AN) aimed at degrading the Eve channel quality. The central processing unit receives the observations from each AP and calculates the optimal precoding and AN covariance matrices by solving a semi-definite relaxation of a constrained Cramer-Rao bound (CRB) minimization problem. Simulation results highlight an underlying trade-off between sensing and communication performances: in particular, the UEs signal-to-noise and interference ratio and the maximum Eve's signal to noise ratio are directly proportional to the CRB. Furthermore, the optimal AN covariance matrix is rank-1 and has a peak in the eve's direction, leading to a surprising inverse-proportionality between the UEs-Eve distance and optimal-CRB magnitude.
△ Less
Submitted 3 June, 2024; v1 submitted 23 January, 2024;
originally announced January 2024.
-
Nonlinear Distortion Radiated from Large Arrays and Active Reconfigurable Intelligent Surfaces
Authors:
Nikolaos Kolomvakis,
Alva Kosasih,
Emil Björnson
Abstract:
Extremely large aperture arrays (ELAAs) and reconfigurable intelligent surfaces (RISs) are candidate enablers to realize connectivity goals for the sixth-generation (6G) wireless networks. For instance, ELAAs can provide orders-of-magnitude higher area throughput compared to what massive multiple-input multiple-output (MIMO) can deliver through spatial multiplexing, while RISs can improve the prop…
▽ More
Extremely large aperture arrays (ELAAs) and reconfigurable intelligent surfaces (RISs) are candidate enablers to realize connectivity goals for the sixth-generation (6G) wireless networks. For instance, ELAAs can provide orders-of-magnitude higher area throughput compared to what massive multiple-input multiple-output (MIMO) can deliver through spatial multiplexing, while RISs can improve the propagation conditions over wireless channels but a passively reflecting RIS must be large to be effective. Active RIS with amplifiers can deal with this issue. In this paper, we study the distortion created by nonlinear amplifiers in both ELAAs and active RIS. We analytically obtain the angular directions and depth of the nonlinear distortion in both near- and far-field channels. The results are demonstrated numerically and we conclude that non-linearities can both create in-band and out-of-band distortion that is beamformed in entirely new directions and distances from the transmitter.
△ Less
Submitted 23 January, 2024;
originally announced January 2024.
-
Towards 6G MIMO: Massive Spatial Multiplexing, Dense Arrays, and Interplay Between Electromagnetics and Processing
Authors:
Emil Björnson,
Chan-Byoung Chae,
Robert W. Heath Jr.,
Thomas L. Marzetta,
Amine Mezghani,
Luca Sanguinetti,
Fredrik Rusek,
Miguel R. Castellanos,
Dongsoo Jun,
Özlem Tugfe Demir
Abstract:
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO…
▽ More
The increasing demand for wireless data transfer has been the driving force behind the widespread adoption of Massive MIMO (multiple-input multiple-output) technology in 5G. The next-generation MIMO technology is now being developed to cater to the new data traffic and performance expectations generated by new user devices and services in the next decade. The evolution towards "ultra-massive MIMO (UM-MIMO)" is not only about adding more antennas but will also uncover new propagation and hardware phenomena that can only be treated by jointly utilizing insights from the communication, electromagnetic (EM), and circuit theory areas. This article offers a comprehensive overview of the key benefits of the UM-MIMO technology and the associated challenges. It explores massive multiplexing facilitated by radiative near-field effects, characterizes the spatial degrees-of-freedom, and practical channel estimation schemes tailored for massive arrays. Moreover, we provide a tutorial on EM theory and circuit theory, and how it is used to obtain physically consistent antenna and channel models. Subsequently, the article describes different ways to implement massive and dense antenna arrays, and how to co-design antennas with signal processing. The main open research challenges are identified at the end.
△ Less
Submitted 5 January, 2024;
originally announced January 2024.
-
Can Far-field Beam Training Be Deployed for Cross-field Beam Alignment in Terahertz UM-MIMO Communications?
Authors:
Yuhang Chen,
Chong Han,
Emil Björnson
Abstract:
Ultra-massive multiple-input multiple-output (UM-MIMO) is the enabler of Terahertz (THz) communications in next-generation wireless networks. In THz UM-MIMO systems, a new paradigm of cross-field communications spanning from near-field to far-field is emerging, since the near-field range expands with higher frequencies and larger array apertures. Precise beam alignment in cross-field is critical b…
▽ More
Ultra-massive multiple-input multiple-output (UM-MIMO) is the enabler of Terahertz (THz) communications in next-generation wireless networks. In THz UM-MIMO systems, a new paradigm of cross-field communications spanning from near-field to far-field is emerging, since the near-field range expands with higher frequencies and larger array apertures. Precise beam alignment in cross-field is critical but challenging. Specifically, unlike far-field beams that rely only on the angle domain, the incorporation of dual-domain (angle and distance) training significantly increases overhead. A natural question arises of whether far-field beam training can be deployed for cross-field beam alignment. In this paper, this question is answered, by demonstrating that the far-field training enables sufficient signal-to-noise ratio (SNR) in both far- and near-field scenarios, while exciting all channel dimensions. Based on that, we propose a subarray-coordinated hierarchical (SCH) training with greatly reduced overhead. To further obtain high-precision beam designs, we propose a two-phase angle and distance beam estimator (TPBE). Extensive simulations demonstrate the effectiveness of the proposed methods. Compared to near-field exhaustive search, the SCH possesses 0.2\% training overhead. The TPBE achieves 0.01~degrees and 0.02~m estimation root-mean-squared errors for angle and distance. Furthermore, with the estimated beam directions, a near-optimal SNR with 0.11~dB deviation is attained after beam alignment.
△ Less
Submitted 12 January, 2024; v1 submitted 16 December, 2023;
originally announced December 2023.
-
A Novel Discrete Phase Shift Design for RIS-Assisted Multi-User MIMO
Authors:
Parisa Ramezani,
Yasaman Khorsandmanesh,
Emil Björnson
Abstract:
Reconfigurable intelligent surface (RIS) is a newly-emerged technology that might fundamentally change how wireless networks are operated. Though extensively studied in recent years, the practical limitations of RIS are often neglected when assessing the performance of RIS-assisted communication networks. One of these limitations is that each RIS element is restricted to incur a controllable phase…
▽ More
Reconfigurable intelligent surface (RIS) is a newly-emerged technology that might fundamentally change how wireless networks are operated. Though extensively studied in recent years, the practical limitations of RIS are often neglected when assessing the performance of RIS-assisted communication networks. One of these limitations is that each RIS element is restricted to incur a controllable phase shift to the reflected signal from a predefined discrete set. This paper studies an RIS-assisted multi-user multiple-input multiple-output (MIMO) system, where an RIS with discrete phase shifts assists in simultaneous uplink data transmission from multiple user equipments (UEs) to a base station (BS). We aim to maximize the sum rate by optimizing the receive beamforming vectors and RIS phase shift configuration. To this end, we transform the original sum-rate maximization problem into a minimum mean square error (MMSE) minimization problem and employ the block coordinate descent (BCD) technique for iterative optimization of the variables until convergence. We formulate the discrete RIS phase shift optimization problem as a mixed-integer least squares problem and propose a novel method based on sphere decoding (SD) to solve it. Through numerical evaluation, we show that the proposed discrete phase shift design outperforms the conventional nearest point map** method, which is prevalently used in previous works.
△ Less
Submitted 9 December, 2023;
originally announced December 2023.
-
Optimal Dual-Polarized Planar Arrays for Massive Capacity Over Point-to-Point MIMO Channels
Authors:
Amna Irshad,
Alva Kosasih,
Emil Björnson,
Luca Sanguinetti
Abstract:
Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix de…
▽ More
Future wireless networks must provide ever higher data rates. The available bandwidth increases roughly linearly as we increase the carrier frequency, but the range shrinks drastically. This paper explores if we can instead reach massive capacities using spatial multiplexing over multiple-input multiple-output (MIMO) channels. In line-of-sight (LOS) scenarios, therank of the MIMO channel matrix depends on the polarization and antenna arrangement. We optimize the rank and condition number by identifying the optimal antenna spacing in dual-polarized planar antenna arrays with imperfect isolation. The result is sparely spaced antenna arrays that exploit radiative near-field properties. We further optimize the array geometry for minimum aperture length and aperture area, which leads to different configurations. Moreover, we prove analytically that for fixed-sized arrays, the MIMO rank grows quadratically with the carrier frequency in LOS scenarios, if the antennas are appropriately designed. Hence, MIMO technology contributes more to the capacity growth than the bandwidth. The numerical results show that massive data rates, far beyond 1 Tbps, can be reached both over fixed point-to-point links. It is also possible for a large base station to serve a practically-sized mobile device.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Broad Beam Reflection for RIS-Assisted MIMO Systems with Planar Arrays
Authors:
Parisa Ramezani,
Maksym A. Girnyk,
Emil Björnson
Abstract:
While reconfigurable intelligent surface (RIS)-aided user-specific beamforming has been vastly investigated, the aspect of utilizing RISs for assisting cell-specific transmission has been largely unattended. Aiming to fill this gap, we study a downlink broadcasting scenario where a base station (BS) sends a cell-specific signal to all the users located in a wide angular area with the assistance of…
▽ More
While reconfigurable intelligent surface (RIS)-aided user-specific beamforming has been vastly investigated, the aspect of utilizing RISs for assisting cell-specific transmission has been largely unattended. Aiming to fill this gap, we study a downlink broadcasting scenario where a base station (BS) sends a cell-specific signal to all the users located in a wide angular area with the assistance of a dual-polarized RIS. We utilize the polarization degree of freedom offered by this type of RIS and design the phase configurations in the two polarizations in such a way that the RIS can radiate a broad beam, thereby uniformly covering all azimuth and elevation angles where the users might reside. Specifically, the per-polarization configuration matrices are designed in such a way that the total power-domain array factor becomes spatially flat over all observation angles implying that the RIS can preserve the broad radiation pattern of a single element while boosting its gain proportionally to its aperture size. We validate the mathematical analyses via numerical simulations.
△ Less
Submitted 1 December, 2023;
originally announced December 2023.
-
A New Polar-Domain Dictionary Design for the Near-field Region of Extremely Large Aperture Arrays
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
A grid of orthogonal beams with zero column coherence can be easily constructed to cover all prospective user equipments (UEs) in the far-field region of a multiple-antenna base station (BS). However, when the BS is equipped with an extremely large aperture array, the Fraunhofer distance is huge, causing the UEs to be located in the radiative near-field region. This calls for designing a grid of b…
▽ More
A grid of orthogonal beams with zero column coherence can be easily constructed to cover all prospective user equipments (UEs) in the far-field region of a multiple-antenna base station (BS). However, when the BS is equipped with an extremely large aperture array, the Fraunhofer distance is huge, causing the UEs to be located in the radiative near-field region. This calls for designing a grid of beams based on a near-field dictionary. In the previous work, a polar-domain grid design was proposed to maintain control over the column coherence. A limitation of this approach is identified in this paper, and we propose an enhanced methodology for the design of a polar-domain dictionary specifically tailored for the near-field of an extremely large aperture uniform planar array. Through simulation results, it is demonstrated that the proposed dictionary, employing a non-uniform distance sampling approach, achieves lower column coherence than the benchmark and significantly improves the localization of UEs compared to uniform distance sampling.
△ Less
Submitted 27 November, 2023;
originally announced November 2023.
-
Resource Efficient Over-the-Air Fronthaul Signaling for Uplink Cell-Free Massive MIMO Systems
Authors:
Zakir Hussain Shaik,
Sai Subramanyam Thoota,
Emil Björnson,
Erik G. Larsson
Abstract:
We propose a novel resource efficient analog over-the-air (OTA) computation framework to address the demanding requirements of the uplink (UL) fronthaul between the access points (APs) and the central processing unit (CPU) in cell-free massive multiple-input multiple-output (MIMO) systems. We discuss the drawbacks of the wired and wireless fronthaul solutions, and show that our proposed mechanism…
▽ More
We propose a novel resource efficient analog over-the-air (OTA) computation framework to address the demanding requirements of the uplink (UL) fronthaul between the access points (APs) and the central processing unit (CPU) in cell-free massive multiple-input multiple-output (MIMO) systems. We discuss the drawbacks of the wired and wireless fronthaul solutions, and show that our proposed mechanism is efficient and scalable as the number of APs increases. We present the transmit precoding and two-phase power assignment strategies at the APs to coherently combine the signals OTA in a spectrally efficient manner. We derive the statistics of the APs locally available signals which enable us to to obtain the analytical expressions for the Bayesian and classical estimators of the OTA combined signals. We empirically evaluate the normalized mean square error (NMSE), symbol error rate (SER), and the coded bit error rate (BER) of our developed solution and benchmark against the state-of-the-art wired fronthaul based system
△ Less
Submitted 14 November, 2023;
originally announced November 2023.
-
Dual-Polarized Reconfigurable Intelligent Surface Assisted Broad Beamforming
Authors:
Parisa Ramezani,
Maksym A. Girnyk,
Emil Björnson
Abstract:
A reconfigurable intelligent surface (RIS) consists of a large number of low-cost elements that can control the propagation environment seen from a transmitter by intelligently applying phase shifts to im**ing signals before reflection. This paper studies an RIS-assisted communication system where a transmitter wants to transmit a common signal to many users residing in a wide angular area. To c…
▽ More
A reconfigurable intelligent surface (RIS) consists of a large number of low-cost elements that can control the propagation environment seen from a transmitter by intelligently applying phase shifts to im**ing signals before reflection. This paper studies an RIS-assisted communication system where a transmitter wants to transmit a common signal to many users residing in a wide angular area. To cover this sector uniformly, the RIS needs to radiate a broad beam with a spatially flat array factor, instead of a narrow beam as normally considered. To achieve this, we propose to use a dual-polarized RIS consisting of elements with orthogonal polarizations and show that the RIS can produce a broad beam if the phase shift configuration vectors in the two polarizations form a so-called Golay complementary sequence pair. By utilizing their properties, we also present a method for constructing configuration for large RISs from smaller ones, while preserving the broad radiation pattern of the smaller RIS. The numerical results corroborate the mathematical analyses and highlight the greatly improved coverage properties.
△ Less
Submitted 12 November, 2023;
originally announced November 2023.
-
Energy Harvesting Maximization for Reconfigurable Intelligent Surfaces Using Amplitude Measurements
Authors:
Morteza Tavana,
Meysam Masoudi,
Emil Björnson
Abstract:
Energy harvesting can enable a reconfigurable intelligent surface (RIS) to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We propose a series of sequential phase-alignment algorithms that maximize the received power based on only power measurements…
▽ More
Energy harvesting can enable a reconfigurable intelligent surface (RIS) to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We propose a series of sequential phase-alignment algorithms that maximize the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value for the noiseless scenario. However, for the noisy scenario, we propose a linear least squares estimator. We prove that within the class of linear estimators, the optimal set of measurement phases are equally-spaced phases. To evaluate the performance of the proposed method, we introduce a random phase update algorithm as a benchmark. Our simulation results show that the proposed algorithms outperform the random phase update method in terms of achieved power after convergence while requiring fewer measurements per phase update. Using simulations, we show that in a noiseless scenario with a discrete set of possible phase shifts for the RIS elements, the proposed method is sub-optimal, achieving a higher value than the random algorithm but not exactly the maximum feasible value that we obtained by exhaustive search.
△ Less
Submitted 6 November, 2023;
originally announced November 2023.
-
Combating Inter-Operator Pilot Contamination in Reconfigurable Intelligent Surfaces Assisted Multi-Operator Networks
Authors:
Doğa Gürgünoğlu,
Emil Björnson,
Gábor Fodor
Abstract:
In this paper, we study a new kind of pilot contamination appearing in multi-operator reconfigurable intelligent surfaces (RIS) assisted networks, where multiple operators provide services to their respective served users. The operators use dedicated frequency bands, but each RIS inadvertently reflects the transmitted uplink signals of the user equipment devices in multiple bands. Consequently, th…
▽ More
In this paper, we study a new kind of pilot contamination appearing in multi-operator reconfigurable intelligent surfaces (RIS) assisted networks, where multiple operators provide services to their respective served users. The operators use dedicated frequency bands, but each RIS inadvertently reflects the transmitted uplink signals of the user equipment devices in multiple bands. Consequently, the concurrent reflection of pilot signals during the channel estimation phase introduces a new inter-operator pilot contamination effect. We investigate the implications of this effect in systems with either deterministic or correlated Rayleigh fading channels, specifically focusing on its impact on channel estimation quality, signal equalization, and channel capacity. The numerical results demonstrate the substantial degradation in system performance caused by this phenomenon and highlight the pressing need to address inter-operator pilot contamination in multi-operator RIS deployments. To combat the negative effect of this new type of pilot contamination, we propose to use orthogonal RIS configurations during uplink pilot transmission, which can mitigate or eliminate the negative effect of inter-operator pilot contamination at the expense of some inter-operator information exchange and orchestration.
△ Less
Submitted 2 November, 2023;
originally announced November 2023.
-
Analytical Nonlinear Distortion Characterization for Frequency-Selective Massive MIMO Channels
Authors:
Murat Babek Salman,
Emil Björnson,
Gokhan Muzaffer Guvensen,
Tolga Ciloglu
Abstract:
Nonlinear distortion stemming from low-cost power amplifiers may severely affect wireless communication performance through out-of-band (OOB) radiation and in-band distortion. The distortion is correlated between different transmit antennas in an antenna array, which results in a beamforming gain at the receiver side that grows with the number of antennas. In this paper, we investigate how the str…
▽ More
Nonlinear distortion stemming from low-cost power amplifiers may severely affect wireless communication performance through out-of-band (OOB) radiation and in-band distortion. The distortion is correlated between different transmit antennas in an antenna array, which results in a beamforming gain at the receiver side that grows with the number of antennas. In this paper, we investigate how the strength of the distortion is affected by the frequency selectivity of the channel. A closed-form expression for the received distortion power is derived as a function of the number of multipath components (MPCs) and the delay spread, which highlight their impact. The performed analysis, which is verified via numerical simulations, reveals that as the number of MPCs increases, distortion exhibits distinct characteristics for in-band and OOB frequencies. It is shown that the received in-band and OOB distortion power is inversely proportional to the number of MPCs, and it is reported that as the delay spread gets narrower, the in-band distortion power is beamformed towards the intended user, which yields higher received in-band distortion compared to the OOB distortion.
△ Less
Submitted 30 October, 2023;
originally announced October 2023.
-
Parametric Channel Estimation with Short Pilots in RIS-Assisted Near- and Far-Field Communications
Authors:
Mehdi Haghshenas,
Parisa Ramezani,
Maurizio Magarini,
Emil Björnson
Abstract:
Considering the dimensionality of a typical reconfigurable intelligent surface (RIS), channel state information acquisition in RIS-assisted systems requires lengthy pilot transmissions. Moreover, the large aperture of the RIS may cause transmitters/receivers to fall in its near-field region, where both distance and angles affect the channel structure. This paper proposes a parametric maximum likel…
▽ More
Considering the dimensionality of a typical reconfigurable intelligent surface (RIS), channel state information acquisition in RIS-assisted systems requires lengthy pilot transmissions. Moreover, the large aperture of the RIS may cause transmitters/receivers to fall in its near-field region, where both distance and angles affect the channel structure. This paper proposes a parametric maximum likelihood estimation (MLE) framework for jointly estimating the direct channel between the user and the base station (BS) and the line-of-sight channel between the user and the RIS, in both far-field and near-field scenarios. The MLE framework is first developed for the case of single-antenna BS and later extended to the scenario where the BS is equipped with multiple antennas. A novel adaptive RIS configuration strategy is proposed to select the RIS configuration for the next pilot to actively refine the estimate. We design a minimal-sized codebook of orthogonal RIS configurations to choose from during pilot transmission with a dimension much smaller than the number of RIS elements. To further reduce the required number of pilots, we propose an initialization strategy with two wide beams. We demonstrate numerically that the proposed MLE method needs only a few pilots for achieving accurate channel estimates and further show that the presented framework performs well under Rician fading. We also showcase efficient user channel tracking in near-field and far-field scenarios.
△ Less
Submitted 25 December, 2023; v1 submitted 21 August, 2023;
originally announced August 2023.
-
Amplitude-Based Sequential Optimization of Energy Harvesting with Reconfigurable Intelligent Surfaces
Authors:
Morteza Tavana,
Meysam Masoudi,
Emil Björnson
Abstract:
Reconfigurable Intelligent Surfaces (RISs) have gained immense popularity in recent years because of their ability to improve wireless coverage and their flexibility to adapt to the changes in a wireless environment. These advantages are due to RISs' ability to control and manipulate radio frequency (RF) wave propagation. RISs may be deployed in inaccessible locations where it is difficult or expe…
▽ More
Reconfigurable Intelligent Surfaces (RISs) have gained immense popularity in recent years because of their ability to improve wireless coverage and their flexibility to adapt to the changes in a wireless environment. These advantages are due to RISs' ability to control and manipulate radio frequency (RF) wave propagation. RISs may be deployed in inaccessible locations where it is difficult or expensive to connect to the power grid. Energy harvesting can enable the RIS to self-sustain its operations without relying on external power sources. In this paper, we consider the problem of energy harvesting for RISs in the absence of coordination with the ambient RF source. We consider both direct and indirect energy harvesting scenarios and show that the same mathematical model applies to them. We propose a sequential phase-alignment algorithm that maximizes the received power based on only power measurements. We prove the convergence of the proposed algorithm to the optimal value under specific circumstances. Our simulation results show that the proposed algorithm converges to the optimal solution in a few iterations and outperforms the random phase update method in terms of the number of required measurements.
△ Less
Submitted 21 July, 2023;
originally announced July 2023.
-
Exploiting the Depth and Angular Domains for Massive Near-Field Spatial Multiplexing
Authors:
Parisa Ramezani,
Alva Kosasih,
Amna Irshad,
Emil Björnson
Abstract:
In this article, we present our vision for how extremely large aperture arrays (ELAAs), equipped with hundreds or thousands of antennas, can play a major role in future 6G networks by enabling a remarkable increase in data rates through spatial multiplexing of a massive number of data streams to both a single user and many simultaneous users. Specifically, with the quantum leap in the array apertu…
▽ More
In this article, we present our vision for how extremely large aperture arrays (ELAAs), equipped with hundreds or thousands of antennas, can play a major role in future 6G networks by enabling a remarkable increase in data rates through spatial multiplexing of a massive number of data streams to both a single user and many simultaneous users. Specifically, with the quantum leap in the array aperture size, the users will be in the so-called radiative near-field region of the array, where previously negligible physical phenomena dominate the propagation conditions and give the channel matrices more favorable properties. This article presents the foundational properties of communication in the radiative near-field region and then exemplifies how these properties enable two unprecedented spatial multiplexing schemes: depth-domain multiplexing of multiple users and angular multiplexing of data streams to a single user. We also highlight research challenges and open problems that require further investigation.
△ Less
Submitted 20 October, 2023; v1 submitted 5 July, 2023;
originally announced July 2023.
-
Finite Beam Depth Analysis for Large Arrays
Authors:
Alva Kosasih,
Emil Björnson
Abstract:
Most wireless communication systems operate in the far-field region of antennas and antenna arrays, where waves are planar and beams have infinite depth. When antenna arrays become electrically large, it is possible that the receiver is in the radiative near-field of the transmitter, and vice versa. Recent works have shown that near-field beamforming exhibits a finite depth, which enables a new de…
▽ More
Most wireless communication systems operate in the far-field region of antennas and antenna arrays, where waves are planar and beams have infinite depth. When antenna arrays become electrically large, it is possible that the receiver is in the radiative near-field of the transmitter, and vice versa. Recent works have shown that near-field beamforming exhibits a finite depth, which enables a new depth-based spatial multiplexing paradigm. In this paper, we explore how the shape and size of an array determine the near-field beam behaviors. In particular, we investigate the $3$ dB beam depth (BD), defined as the range of distances where the gain is greater than half of the peak gain. We derive analytical gain and BD expressions and prove how they depend on the aperture area and length. For non-broadside transmissions, we find that the BD increases as the transmitter approaches the end-fire direction of the array. Furthermore, it is sufficient to characterize the BD for a broadside transmitter, as the beam pattern with a non-broadside transmitter can be approximated by that of a smaller/projected array with a broadside transmitter. Our analysis demonstrates that the BD can be ordered from smallest to largest as ULA, circular, and square arrays.
△ Less
Submitted 25 February, 2024; v1 submitted 21 June, 2023;
originally announced June 2023.
-
Impact of Pilot Contamination Between Operators With Interfering Reconfigurable Intelligent Surfaces
Authors:
Doğa Gürgünoğlu,
Emil Björnson,
Gábor Fodor
Abstract:
In this paper, we study the impact of pilot contamination in a system where two operators serve their respective users with the assistance of two wide-band reconfigurable intelligent surfaces (RIS), each belonging to a single operator. We consider one active user per operator and they use disjoint narrow frequency bands. Although each RIS is dedicated to a single operator, both users' transmission…
▽ More
In this paper, we study the impact of pilot contamination in a system where two operators serve their respective users with the assistance of two wide-band reconfigurable intelligent surfaces (RIS), each belonging to a single operator. We consider one active user per operator and they use disjoint narrow frequency bands. Although each RIS is dedicated to a single operator, both users' transmissions are reflected by both RISs. We show that this creates a new kind of pilot contamination effect when pilots are transmitted simultaneously. Since combating inter-operator pilot contamination in RIS-assisted networks would require long pilot signal sequences to maintain orthogonality among the users of different operators, we propose the orthogonal configurations of the RISs. Numerical results show that this approach completely eliminates pilot contamination, and significantly improves the performance in terms of channel estimation and equalization by removing the channel estimation bias.
△ Less
Submitted 10 June, 2023;
originally announced June 2023.
-
Optimal Geometries of Dual-Polarized Arrays for Large Point-to-Point MIMO Channels
Authors:
Amna Irshad,
Emil Björnson
Abstract:
Traditional point-to-point line-of-sight channels have rank 1, irrespective of the number of antennas and array geometries, due to far-field propagation conditions. By contrast, recent papers in the holographic multiple-input multiple-output (MIMO) literature characterize the maximum channel rank that can be achieved between two continuous array apertures, which is much larger than 1 under near-fi…
▽ More
Traditional point-to-point line-of-sight channels have rank 1, irrespective of the number of antennas and array geometries, due to far-field propagation conditions. By contrast, recent papers in the holographic multiple-input multiple-output (MIMO) literature characterize the maximum channel rank that can be achieved between two continuous array apertures, which is much larger than 1 under near-field propagation conditions. In this paper, we maximize the channel capacity between two dual-polarized uniform rectangular arrays (URAs) with discrete antenna elements for a given propagation distance. In particular, we derive the antenna spacings that lead to an ideal MIMO channel where all singular values are as similar as possible. We utilize this analytic result to find the two array geometries that respectively minimize the aperture area and the aperture length.
△ Less
Submitted 30 May, 2023;
originally announced May 2023.
-
Multi-Static Target Detection and Power Allocation for Integrated Sensing and Communication in Cell-Free Massive MIMO
Authors:
Zinat Behdad,
Özlem Tuğfe Demir,
Ki Won Sung,
Emil Björnson,
Cicek Cavdar
Abstract:
This paper studies an integrated sensing and communication (ISAC) system within a centralized cell-free massive MIMO (multiple-input multiple-output) network for target detection. ISAC transmit access points serve the user equipments in the downlink and optionally steer a beam toward the target in a multi-static sensing framework. A maximum a posteriori ratio test detector is developed for target…
▽ More
This paper studies an integrated sensing and communication (ISAC) system within a centralized cell-free massive MIMO (multiple-input multiple-output) network for target detection. ISAC transmit access points serve the user equipments in the downlink and optionally steer a beam toward the target in a multi-static sensing framework. A maximum a posteriori ratio test detector is developed for target detection in the presence of clutter, so-called target-free signals. Additionally, sensing spectral efficiency (SE) is introduced as a key metric, capturing the impact of resource utilization in ISAC. A power allocation algorithm is proposed to maximize the sensing signal-to-interference-plus-noise ratio while ensuring minimum communication requirements. Two ISAC configurations are studied: utilizing existing communication beams for sensing and using additional sensing beams. The proposed algorithm's efficiency is investigated in realistic and idealistic scenarios, corresponding to the presence and absence of the target-free channels, respectively. Despite performance degradation in the presence of target-free channels, the proposed algorithm outperforms the interference-unaware benchmark, leveraging clutter statistics. Comparisons with a fully communication-centric algorithm reveal superior performance in both cluttered and clutter-free environments. The incorporation of an extra sensing beam enhances detection performance for lower radar cross-section variances. Moreover, the results demonstrate the effectiveness of the integrated operation of sensing and communication compared to an orthogonal resource-sharing approach.
△ Less
Submitted 27 March, 2024; v1 submitted 21 May, 2023;
originally announced May 2023.
-
A Bayesian Approach to Characterize Unknown Interference Power in Wireless Networks
Authors:
Mahmoud Zaher,
Emil Björnson,
Marina Petrova
Abstract:
The existence of unknown interference is a prevalent problem in wireless communication networks. Especially in multi-user multiple-input multiple-output (MIMO) networks, where a large number of user equipments are served on the same time-frequency resources, the outage performance may be dominated by the unknown interference arising from scheduling variations in neighboring cells. In this letter,…
▽ More
The existence of unknown interference is a prevalent problem in wireless communication networks. Especially in multi-user multiple-input multiple-output (MIMO) networks, where a large number of user equipments are served on the same time-frequency resources, the outage performance may be dominated by the unknown interference arising from scheduling variations in neighboring cells. In this letter, we propose a Bayesian method for modeling the unknown interference power in the uplink of a cellular network. Numerical results show that our method accurately models the distribution of the unknown interference power and can be effectively used for rate adaptation with guaranteed target outage performance.
△ Less
Submitted 12 May, 2023;
originally announced May 2023.
-
25 Years of Signal Processing Advances for Multiantenna Communications
Authors:
Emil Björnson,
Yonina C. Eldar,
Erik G. Larsson,
Angel Lozano,
H. Vincent Poor
Abstract:
Wireless communication technology has progressed dramatically over the past 25 years, in terms of societal adoption as well as technical sophistication. In 1998, mobile phones were still in the process of becoming compact and affordable devices that could be widely utilized in both developed and develo** countries. There were "only" 300 million mobile subscribers in the world [1]. Cellular netwo…
▽ More
Wireless communication technology has progressed dramatically over the past 25 years, in terms of societal adoption as well as technical sophistication. In 1998, mobile phones were still in the process of becoming compact and affordable devices that could be widely utilized in both developed and develo** countries. There were "only" 300 million mobile subscribers in the world [1]. Cellular networks were among the first privatized telecommunication markets, and competition turned the devices into fashion accessories with attractive designs that could be individualized. The service was circumscribed to telephony and text messaging, but it was groundbreaking in that, for the first time, telecommunication was between people rather than locations.
Wireless networks have changed dramatically over the past few decades, enabling this revolution in service provisioning and making it possible to accommodate the ensuing dramatic growth in traffic. There are many contributing components, including new air interfaces for faster transmission, channel coding for enhanced reliability, improved source compression to remove redundancies, and leaner protocols to reduce overheads. Signal processing is at the core of these improvements, but nowhere has it played a bigger role than in the development of multiantenna communication. This article tells the story of how major signal processing advances have transformed the early multiantenna concepts into mainstream technology over the past 25 years. The story therefore begins somewhat arbitrarily in 1998. A broad account of the state-of-the-art signal processing techniques for wireless systems by 1998 can be found in [2], and its contrast with recent textbooks such as [3]-[5] reveals the dramatic leap forward that has taken place in the interim.
△ Less
Submitted 5 April, 2023;
originally announced April 2023.
-
A New Channel Subspace Characterization for Channel Estimation in RIS-Aided Communications
Authors:
Mehdi Haghshenas,
Parisa Ramezani,
Maurizio Magarini,
Emil Björnson
Abstract:
A reconfigurable intelligent surface (RIS) is a holographic MIMO surface composed of a large number of passive elements that can induce adjustable phase shifts to the im**ing waves. By creating virtual line-of-sight (LOS) paths between the transmitter and the receiver, RIS can be a game changer for millimeter-wave (mmWave) communication systems that typically suffer from severe signal attenuatio…
▽ More
A reconfigurable intelligent surface (RIS) is a holographic MIMO surface composed of a large number of passive elements that can induce adjustable phase shifts to the im**ing waves. By creating virtual line-of-sight (LOS) paths between the transmitter and the receiver, RIS can be a game changer for millimeter-wave (mmWave) communication systems that typically suffer from severe signal attenuation. Rea** the benefits of RIS, however, relies on the accuracy of the channel estimation, which is a challenging task due to the large number of RIS elements. Specifically, conventional channel estimators require a pilot overhead equal to the number of RIS elements, which is impractical. Herein, we propose a novel way to approximately represent the RIS channels in a lower-dimensional subspace and derive the basis vectors for the identified subspace. We use this channel structure to only send pilots in this subspace, thereby vastly saving on the pilot overhead. Numerical results demonstrate that when the RIS has an element spacing of a quarter of the wavelength, our method reduces the pilot overhead by 80% with retained or even improved performance.
△ Less
Submitted 4 April, 2023;
originally announced April 2023.
-
Optimizing Reconfigurable Intelligent Surfaces for Short Transmissions: How Detailed Configurations can be Afforded?
Authors:
Anders Enqvist,
Özlem Tuğfe Demir,
Cicek Cavdar,
Emil Björnson
Abstract:
This paper examines how to minimize the energy consumption of a user equipment (UE) when transmitting short data payloads. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS), which requires additional pilot signals to be configured, to improve the channel conditions. The challenge is that the pilot signals increase the energy consumption and must be balanced agains…
▽ More
This paper examines how to minimize the energy consumption of a user equipment (UE) when transmitting short data payloads. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS), which requires additional pilot signals to be configured, to improve the channel conditions. The challenge is that the pilot signals increase the energy consumption and must be balanced against energy savings during data transmission. We derive a formula for the energy consumption, including both pilot and data transmission powers and the effects of imperfect channel state information and discrete phase-shifts.
To shorten the pilot length, we propose dividing the RIS into subarrays of multiple elements using the same reflection coefficient. The pilot power and subarray size are tuned to the payload length to minimize the energy consumption. Analytical results show that there exists a unique energy-minimizing solution. For small payloads and when the direct path loss between the BS and UE is weak compared to the path loss via the RIS, the solution is using subarrays with many elements and low pilot power and vice versa. The optimal percentage of energy spent on pilot signaling is in the order of 10-40%.
△ Less
Submitted 18 October, 2023; v1 submitted 29 March, 2023;
originally announced March 2023.
-
Optimizing Reconfigurable Intelligent Surfaces for Small Data Packets: A Subarray Approach
Authors:
Anders Enqvist,
Özlem Tuğfe Demir,
Cicek Cavdar,
Emil Björnson
Abstract:
In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and d…
▽ More
In this paper, we examine the energy consumption of a user equipment (UE) when it transmits a finite-sized data packet. The receiving base station (BS) controls a reconfigurable intelligent surface (RIS) that can be utilized to improve the channel conditions, if additional pilot signals are transmitted to configure the RIS. We derive a formula for the energy consumption taking both the pilot and data transmission powers into account. By dividing the RIS into subarrays consisting of multiple RIS elements using the same reflection coefficient, the pilot overhead can be tuned to minimize the energy consumption while maintaining parts of the aperture gain. Our analytical results show that there exists an energy-minimizing subarray size. For small data blocks and when the channel conditions between the BS and UE are favorable compared to the path to the RIS, the energy consumption is minimized using large subarrays. When the channel conditions to the RIS are better and the data blocks are large, it is preferable to use fewer elements per subarray and potentially configure the elements individually.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Efficient LOS Channel Estimation for RIS-Aided Communications Under Non-Stationary Mobility
Authors:
Mehdi Haghshenas,
Parisa Ramezani,
Emil Björnson
Abstract:
Reconfigurable intelligent surface (RIS) is a newly-emerged technology that, with its unique features, is considered to be a game changer for future wireless networks. Channel estimation is one of the most critical challenges for the realization of RIS-assisted communications. Non-parametric channel estimation techniques are inefficient due to the huge pilot dimensionality that stems from the larg…
▽ More
Reconfigurable intelligent surface (RIS) is a newly-emerged technology that, with its unique features, is considered to be a game changer for future wireless networks. Channel estimation is one of the most critical challenges for the realization of RIS-assisted communications. Non-parametric channel estimation techniques are inefficient due to the huge pilot dimensionality that stems from the large number of RIS elements. The challenge becomes more serious if we consider the mobility of the users where the channel needs to be re-estimated whenever the user moves to a new location. This paper develops a novel maximum likelihood estimator (MLE) for jointly estimating the line-of-sight (LOS) channel from the user to the RIS and the direct channel between the user and the base station. By smartly refining the RIS configuration during the channel estimation procedure, we show that the channels can be accurately estimated with only a few pilot transmissions -- much fewer than the number of RIS elements. The proposed scheme is also shown to be capable of effectively tracking the channel when the user moves around in a continuous but non-stationary manner with varying LOS angles.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Spherical Wavefronts Improve MU-MIMO Spectral Efficiency When Using Electrically Large Arrays
Authors:
Giacomo Bacci,
Luca Sanguinetti,
Emil Björnson
Abstract:
Modern MIMO communication systems are almost exclusively designed under the assumption of locally plane wavefronts over antenna arrays. This is known as the far-field approximation and is soundly justified at sub-6-GHz frequencies at most relevant transmission ranges. However, when higher frequencies and shorter transmission ranges are used, the wave curvature over the array is no longer negligibl…
▽ More
Modern MIMO communication systems are almost exclusively designed under the assumption of locally plane wavefronts over antenna arrays. This is known as the far-field approximation and is soundly justified at sub-6-GHz frequencies at most relevant transmission ranges. However, when higher frequencies and shorter transmission ranges are used, the wave curvature over the array is no longer negligible, and arrays operate in the so-called radiative near-field region. This letter aims to show that the classical far-field approximation may significantly underestimate the achievable spectral efficiency of multi-user MIMO communications operating in the 30-GHz bands and above, even at ranges beyond the Fraunhofer distance. For planar arrays with typical sizes, we show that computing combining schemes based on the far-field model significantly reduces the channel gain and spatial multiplexing capability. When the radiative near-field model is used, interference rejection schemes, such as the optimal minimum mean-square-error combiner, appear to be very promising, when combined with electrically large arrays, to meet the stringent requirements of next-generation networks.
△ Less
Submitted 27 February, 2023;
originally announced February 2023.
-
mmWave Coverage Extension Using Reconfigurable Intelligent Surfaces in Indoor Dense Spaces
Authors:
Zhenyu Li,
Ozan Alp Topal,
Özlem Tuğfe Demir,
Emil Björnson,
Cicek Cavdar
Abstract:
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose…
▽ More
In this work, we consider the deployment of reconfigurable intelligent surfaces (RISs) to extend the coverage of a millimeter-wave (mmWave) network in indoor dense spaces. We first integrate RIS into ray-tracing simulations to realistically capture the propagation characteristics, then formulate a non-convex optimization problem that minimizes the number of RISs under rate constraints. We propose a feasible point pursuit and successive convex approximation-based algorithm, which solves the problem by jointly selecting the RIS locations, optimizing the RIS phase-shifts, and allocating time resources to user equipments (UEs). The numerical results demonstrate substantial coverage extension by using at least four RISs, and a data rate of 130 Mbit/s is guaranteed for UEs in the considered area of an airplane cabin.
△ Less
Submitted 18 February, 2023;
originally announced February 2023.
-
UL-DL duality for cell-free massive MIMO with per-AP power and information constraints
Authors:
Lorenzo Miretti,
Renato L. G. Cavalcante,
Emil Björnson,
Sławomir Stańczak
Abstract:
We derive a novel uplink-downlink duality principle for optimal joint precoding design under per-transmitter power and information constraints in fading channels. The information constraints model limited sharing of channel state information and data bearing signals across the transmitters. The main application is to cell-free networks, where each access point (AP) must typically satisfy an indivi…
▽ More
We derive a novel uplink-downlink duality principle for optimal joint precoding design under per-transmitter power and information constraints in fading channels. The information constraints model limited sharing of channel state information and data bearing signals across the transmitters. The main application is to cell-free networks, where each access point (AP) must typically satisfy an individual power constraint and form its transmit signal using limited cooperation capabilities. Our duality principle applies to ergodic achievable rates given by the popular hardening bound, and it can be interpreted as a nontrivial generalization of a previous result by Yu and Lan for deterministic channels. This generalization allows us to study involved information constraints going beyond the simple case of cluster-wise centralized precoding covered by previous techniques. Specifically, we show that the optimal joint precoders are, in general, given by an extension of the recently developed team minimum mean-square error method. As a particular yet practical example, we then solve the problem of optimal local precoding design in user-centric cell-free massive MIMO networks subject to per-AP power constraints.
△ Less
Submitted 19 April, 2024; v1 submitted 16 January, 2023;
originally announced January 2023.
-
Cell-Free Massive MIMO in O-RAN: Energy-Aware Joint Orchestration of Cloud, Fronthaul, and Radio Resources
Authors:
Özlem Tuğfe Demir,
Meysam Masoudi,
Emil Björnson,
Cicek Cavdar
Abstract:
For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this pape…
▽ More
For the energy-efficient deployment of cell-free massive MIMO functionality in a practical wireless network, the end-to-end (from radio site to the cloud) energy-aware operation is essential. In line with the cloudification and virtualization in the open radio access networks (O-RAN), it is indisputable to envision prospective cell-free infrastructure on top of the O-RAN architecture. In this paper, we explore the performance and power consumption of cell-free massive MIMO technology in comparison with traditional small-cell systems, in the virtualized O-RAN architecture. We compare two different functional split options and different resource orchestration mechanisms. In the end-to-end orchestration scheme, we aim to minimize the end-to-end power consumption by jointly allocating the radio, optical fronthaul, and virtualized cloud processing resources. We compare end-to-end orchestration with two other schemes: i) "radio-only" where radio resources are optimized independently from the cloud and ii) "local cloud coordination" where orchestration is only allowed among a local cluster of radio units. We develop several algorithms to solve the end-to-end power minimization and sum spectral efficiency maximization problems. The numerical results demonstrate that end-to-end resource allocation with fully virtualized fronthaul and cloud resources provides a substantial additional power saving than the other resource orchestration schemes.
△ Less
Submitted 29 January, 2024; v1 submitted 15 January, 2023;
originally announced January 2023.
-
Improving Fairness for Cell-Free Massive MIMO Through Interference-Aware Massive Access
Authors:
Shuaifei Chen,
Jiayi Zhang,
Emil Björnson,
Bo Ai
Abstract:
Cell-free massive multiple-input multiple-output (CF mMIMO) provides good interference management by coordinating many more access points (APs) than user equipments (UEs). It becomes challenging to determine which APs should serve which UEs with which pilots when the number of UEs approximates the number of APs and far exceeds the number of pilots. Compared to the previous work, a better compromis…
▽ More
Cell-free massive multiple-input multiple-output (CF mMIMO) provides good interference management by coordinating many more access points (APs) than user equipments (UEs). It becomes challenging to determine which APs should serve which UEs with which pilots when the number of UEs approximates the number of APs and far exceeds the number of pilots. Compared to the previous work, a better compromise between spectral efficiency (SE) and implementation simplicity is needed in such massive access scenarios. This paper proposes an interference-aware massive access (IAMA) scheme realizing joint AP-UE association and pilot assignment for CF mMIMO by exploiting the large-scale interference features. We propose an interference-aware reward as a novel performance metric and use it to develop two iterative algorithms to optimize the association and pilot assignment. The numerical results show a prominent advantage of our IAMA scheme over the benchmark schemes in terms of the user fairness and the average SE.
△ Less
Submitted 5 December, 2022;
originally announced December 2022.
-
Activity Detection in Distributed Massive MIMO With Pilot-Hop** and Activity Correlation
Authors:
Ema Becirovic,
Emil Björnson,
Erik G. Larsson
Abstract:
Many real-world scenarios for massive machine-type communication involve sensors monitoring a physical phenomenon. As a consequence, the activity pattern of these sensors will be correlated. In this letter, we study how the correlation of user activities can be exploited to improve detection performance in grant-free random access systems where the users transmit pilot-hop** sequences and the de…
▽ More
Many real-world scenarios for massive machine-type communication involve sensors monitoring a physical phenomenon. As a consequence, the activity pattern of these sensors will be correlated. In this letter, we study how the correlation of user activities can be exploited to improve detection performance in grant-free random access systems where the users transmit pilot-hop** sequences and the detection is performed based on the received energy. We show that we can expect considerable performance gains by adding regularizers, which take the activity correlation into account, to the non-negative least squares, which has been shown to work well for independent user activity.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Maximum Likelihood Channel Estimation for RIS-Aided Communications With LOS Channels
Authors:
Emil Björnson,
Parisa Ramezani
Abstract:
A reconfigurable intelligent surface (RIS) reflects incoming signals in different ways depending on the phase-shift pattern assigned to its elements. The most promising use case is to aid the communication between a base station and a user when the user has a line-of-sight (LOS) channel to the RIS but the direct channel is blocked. The main challenge is to estimate the channel with limited resourc…
▽ More
A reconfigurable intelligent surface (RIS) reflects incoming signals in different ways depending on the phase-shift pattern assigned to its elements. The most promising use case is to aid the communication between a base station and a user when the user has a line-of-sight (LOS) channel to the RIS but the direct channel is blocked. The main challenge is to estimate the channel with limited resources because non-parametric estimation methods require a pilot length proportional to the large number of RIS elements. In this paper, we develop a parametric maximum likelihood (ML) channel estimation framework for estimating the LOS channel to the RIS. We demonstrate that the proposed algorithm can accurately obtain the channel and preferred RIS configuration using only a few pilots. A key novelty is that the RIS configurations used during pilot transmission are selected to progressively improve the estimation accuracy.
△ Less
Submitted 3 December, 2022; v1 submitted 22 September, 2022;
originally announced September 2022.
-
Soft Handover Procedures in mmWave Cell-Free Massive MIMO Networks
Authors:
Mahmoud Zaher,
Emil Björnson,
Marina Petrova
Abstract:
This paper considers a mmWave cell-free massive MIMO (multiple-input multiple-output) network composed of a large number of geographically distributed access points (APs) simultaneously serving multiple user equipments (UEs) via coherent joint transmission. We address UE mobility in the downlink (DL) with imperfect channel state information (CSI) and pilot training. Aiming at extending traditional…
▽ More
This paper considers a mmWave cell-free massive MIMO (multiple-input multiple-output) network composed of a large number of geographically distributed access points (APs) simultaneously serving multiple user equipments (UEs) via coherent joint transmission. We address UE mobility in the downlink (DL) with imperfect channel state information (CSI) and pilot training. Aiming at extending traditional handover concepts to the challenging AP-UE association strategies of cell-free networks, distributed algorithms for joint pilot assignment and cluster formation are proposed in a dynamic environment considering UE mobility. The algorithms provide a systematic procedure for initial access and update of the serving APs and assigned pilot sequence to each UE. The principal goal is to limit the necessary number of AP and pilot changes, while limiting computational complexity. We evaluate the performance, in terms of spectral efficiency (SE), with maximum ratio and regularized zero-forcing precoding. Results show that our proposed distributed algorithms effectively identify the essential AP-UE association refinements with orders-of-magnitude lower computational time compared to the state-of-the-art. It also provides a significantly lower average number of pilot changes compared to an ultra-dense network (UDN). Moreover, we develop an improved pilot assignment procedure that facilitates massive access to the network in highly loaded scenarios.
△ Less
Submitted 2 November, 2023; v1 submitted 6 September, 2022;
originally announced September 2022.
-
Optimized Precoding for MU-MIMO With Fronthaul Quantization
Authors:
Yasaman Khorsandmanesh,
Emil Björnson,
Joakim Jaldén
Abstract:
One of the first widespread uses of multi-user multiple-input multiple-output (MU-MIMO) is in 5G networks, where each base station has an advanced antenna system (AAS) that is connected to the baseband unit (BBU) with a capacity-constrained fronthaul. In the AAS configuration, multiple passive antenna elements and radio units are integrated into a single box. This paper considers precoded downlink…
▽ More
One of the first widespread uses of multi-user multiple-input multiple-output (MU-MIMO) is in 5G networks, where each base station has an advanced antenna system (AAS) that is connected to the baseband unit (BBU) with a capacity-constrained fronthaul. In the AAS configuration, multiple passive antenna elements and radio units are integrated into a single box. This paper considers precoded downlink transmission over a single-cell MU-MIMO system. We study optimized linear precoding for AAS with a limited-capacity fronthaul, which requires the precoding matrix to be quantized. We propose a new precoding design that is aware of the fronthaul quantization and minimizes the mean-squared error at the receiver side. We compute the precoding matrix using a sphere decoding (SD) approach. We also propose a heuristic low-complexity approach to quantized precoding. This heuristic is computationally efficient enough for massive MIMO systems. The numerical results show that our proposed precoding significantly outperforms quantization-unaware precoding and other previous approaches in terms of the sum rate. The performance loss for our heuristic method compared to quantization-aware precoding is insignificant considering the complexity reduction, which makes the heuristic method feasible for real-time applications. We consider both perfect and imperfect channel state information.
△ Less
Submitted 5 September, 2022;
originally announced September 2022.