-
Meta-Backscatter: A New ISAC Paradigm for Battery-Free Internet of Things
Authors:
Xu Liu,
Hongliang Zhang,
Kaigui Bian,
Xi Weng,
Lingyang Song
Abstract:
The meta-material sensor has been regarded as a next-generation sensing technology for the battery-free Internet of Things (IoT) due to its battery-free characteristic and improved sensing performance. The meta-material sensors function as backscatter tags that change their reflection coefficients with the conditions of sensing targets such as temperature and gas concentration, allowing transceive…
▽ More
The meta-material sensor has been regarded as a next-generation sensing technology for the battery-free Internet of Things (IoT) due to its battery-free characteristic and improved sensing performance. The meta-material sensors function as backscatter tags that change their reflection coefficients with the conditions of sensing targets such as temperature and gas concentration, allowing transceivers to perform sensing by analyzing the reflected signals from the sensors. Simultaneously, the sensors also function as environmental scatterers, creating additional signal paths to enhance communication performance. Therefore, the meta-material sensor potentially provides a new paradigm of Integrated Sensing and Communication (ISAC) for the battery-free IoT system. In this article, we first propose a Meta-Backscatter system that utilizes meta-material sensors to achieve diverse sensing functionalities and improved communication performance. We begin with the introduction of the metamaterial sensor and further elaborate on the Meta-Backscatter system. Subsequently, we present optimization strategies for meta-material sensors, transmitters, and receivers to strike a balance between sensing and communication. Furthermore, this article provides a case study of the system and examines the feasibility and trade-off through the simulation results. Finally, potential extensions of the system and their related research challenges are addressed.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
MetaRadar: Multi-target Detection for Reconfigurable Intelligent Surface Aided Radar Systems
Authors:
Haobo Zhang,
Hongliang Zhang,
Boya Di,
Kaigui Bian,
Zhu Han,
Lingyang Song
Abstract:
As a widely used localization and sensing technique, radars will play an important role in future wireless networks. However, the wireless channels between the radar and the targets are passively adopted by traditional radars, which limits the performance of target detection. To address this issue, we propose to use the reconfigurable intelligent surface (RIS) to improve the detection accuracy of…
▽ More
As a widely used localization and sensing technique, radars will play an important role in future wireless networks. However, the wireless channels between the radar and the targets are passively adopted by traditional radars, which limits the performance of target detection. To address this issue, we propose to use the reconfigurable intelligent surface (RIS) to improve the detection accuracy of radar systems due to its capability to customize channel conditions by adjusting its phase shifts, which is referred to as MetaRadar. In such a system, it is challenging to jointly optimize both radar waveforms and RIS phase shifts in order to improve the multi-target detection performance. To tackle this challenge, we design a waveform and phase shift optimization (WPSO) algorithm to effectively solve the multi-target detection problem, and also analyze the performance of the proposed MetaRadar scheme theoretically. Simulation results show that the detection performance of the MetaRadar scheme is significantly better than that of the traditional radar schemes.
△ Less
Submitted 24 March, 2023; v1 submitted 24 February, 2022;
originally announced February 2022.
-
MetaSketch: Wireless Semantic Segmentation by Metamaterial Surfaces
Authors:
**gzhi Hu,
Hongliang Zhang,
Kaigui Bian,
Zhu Han,
H. Vincent Poor,
Lingyang Song
Abstract:
Semantic segmentation is a process of partitioning an image into multiple segments for recognizing humans and objects, which can be widely applied in scenarios such as healthcare and safety monitoring. To avoid privacy violation, using RF signals instead of an image for human and object recognition has gained increasing attention. However, human and object recognition by using RF signals is usuall…
▽ More
Semantic segmentation is a process of partitioning an image into multiple segments for recognizing humans and objects, which can be widely applied in scenarios such as healthcare and safety monitoring. To avoid privacy violation, using RF signals instead of an image for human and object recognition has gained increasing attention. However, human and object recognition by using RF signals is usually a passive signal collection and analysis process without changing the radio environment, and the recognition accuracy is restricted significantly by unwanted multi-path fading, and/or the limited number of independent channels between RF transceivers in uncontrollable radio environments. This paper introduces MetaSketch, a novel RF-sensing system that performs semantic recognition and segmentation for humans and objects by making the radio environment reconfigurable. A metamaterial surface is incorporated into MetaSketch and diversifies the information carried by RF signals. Using compressive sensing techniques, MetaSketch reconstructs a point cloud consisting of the reflection coefficients of humans and objects at different spatial points, and recognizes the semantic meaning of the points by using symmetric multilayer perceptron groups. Our evaluation results show that MetaSketch is capable of generating favorable radio environments and extracting exact point clouds, and labeling the semantic meaning of the points with an average error rate of less than 1% in an indoor space.
△ Less
Submitted 5 October, 2021; v1 submitted 13 August, 2021;
originally announced August 2021.
-
Wireless Indoor Simultaneous Localization and Map** Using Reconfigurable Intelligent Surface
Authors:
Ziang Yang,
Haobo Zhang,
Boya Di,
Hongliang Zhang,
Kaigui Bian,
Lingyang Song
Abstract:
Indoor wireless simultaneous localization and map** (SLAM) is considered as a promising technique to provide positioning services in future 6G systems. However, the accuracy of traditional wireless SLAM system heavily relies on the quality of propagation paths, which is limited by the uncontrollable wireless environment. In this paper, we propose a novel SLAM system assisted by a reconfigurable…
▽ More
Indoor wireless simultaneous localization and map** (SLAM) is considered as a promising technique to provide positioning services in future 6G systems. However, the accuracy of traditional wireless SLAM system heavily relies on the quality of propagation paths, which is limited by the uncontrollable wireless environment. In this paper, we propose a novel SLAM system assisted by a reconfigurable intelligent surface (RIS) to address this issue. By configuring the phase shifts of the RIS, the strength of received signals can be enhanced to resist the disturbance of noise. However, the selection of phase shifts heavily influences the localization and map** phase, which makes the design very challenging. To tackle this challenge, we formulate the RIS-assisted indoor SLAM optimization problem and design an error minimization algorithm for it. Simulations show that the RIS assisted SLAM system can decrease the positioning error by at least 31% compared with benchmark schemes.
△ Less
Submitted 4 July, 2021;
originally announced July 2021.
-
Meta-material Sensors based Internet of Things for 6G Communications
Authors:
**gzhi Hu,
Hongliang Zhang,
Boya Di,
Kaigui Bian,
Lingyang Song
Abstract:
In the coming 6G communications, the internet of things (IoT) serves as a key enabler to collect environmental information and is expected to achieve ubiquitous deployment. However, it is challenging for traditional IoT sensors to meet this expectation because of their requirements of power supplies and frequent maintenance, which are due to their power-demanding sense and transmit modules. To add…
▽ More
In the coming 6G communications, the internet of things (IoT) serves as a key enabler to collect environmental information and is expected to achieve ubiquitous deployment. However, it is challenging for traditional IoT sensors to meet this expectation because of their requirements of power supplies and frequent maintenance, which are due to their power-demanding sense and transmit modules. To address this challenge, we propose a meta-IoT sensing system, where the IoT sensors are based on specially designed meta-materials. The meta-IoT sensors achieve simultaneous sensing and transmission by physical reflection and require no power supplies. In order to design a meta-IoT sensing system with optimal sensing accuracy, we jointly consider the sensing and transmission of meta-IoT sensors and propose efficient algorithms to optimize the meta-IoT structure and the sensing function at the receiver. As an example, we apply the meta-IoT system to sensing environmental temperature and humidity levels. Simulation results show that by using the proposed algorithm, the sensing accuracy can be largely increased.
△ Less
Submitted 5 October, 2021; v1 submitted 3 July, 2021;
originally announced July 2021.
-
MetaSensing: Intelligent Metasurface Assisted RF 3D Sensing by Deep Reinforcement Learning
Authors:
**gzhi Hu,
Hongliang Zhang,
Kaigui Bian,
Marco Di Renzo,
Zhu Han,
Lingyang Song
Abstract:
Using RF signals for wireless sensing has gained increasing attention. However, due to the unwanted multi-path fading in uncontrollable radio environments, the accuracy of RF sensing is limited. Instead of passively adapting to the environment, in this paper, we consider the scenario where an intelligent metasurface is deployed for sensing the existence and locations of 3D objects. By programming…
▽ More
Using RF signals for wireless sensing has gained increasing attention. However, due to the unwanted multi-path fading in uncontrollable radio environments, the accuracy of RF sensing is limited. Instead of passively adapting to the environment, in this paper, we consider the scenario where an intelligent metasurface is deployed for sensing the existence and locations of 3D objects. By programming its beamformer patterns, the metasurface can provide desirable propagation properties. However, achieving a high sensing accuracy is challenging, since it requires the joint optimization of the beamformer patterns and map** of the received signals to the sensed outcome. To tackle this challenge, we formulate an optimization problem for minimizing the cross-entropy loss of the sensing outcome, and propose a deep reinforcement learning algorithm to jointly compute the optimal beamformer patterns and the map** of the received signals. Simulation results verify the effectiveness of the proposed algorithm and show how the sizes of the metasurface and the target space influence the sensing accuracy.
△ Less
Submitted 24 November, 2020;
originally announced November 2020.
-
MetaLocalization: Reconfigurable Intelligent Surface Aided Multi-user Wireless Indoor Localization
Authors:
Haobo Zhang,
Hongliang Zhang,
Boya Di,
Kaigui Bian,
Zhu Han,
Lingyang Song
Abstract:
The received signal strength (RSS) based technique is extensively utilized for localization in the indoor environments. Since the RSS values of neighboring locations may be similar, the localization accuracy of the RSS based technique is limited. To tackle this problem, in this paper, we propose to utilize reconfigurable intelligent surface (RIS) for the RSS based multi-user localization. As the R…
▽ More
The received signal strength (RSS) based technique is extensively utilized for localization in the indoor environments. Since the RSS values of neighboring locations may be similar, the localization accuracy of the RSS based technique is limited. To tackle this problem, in this paper, we propose to utilize reconfigurable intelligent surface (RIS) for the RSS based multi-user localization. As the RIS is able to customize the radio channels by adjusting the phase shifts of the signals reflected at the surface, the localization accuracy in the RIS aided scheme can be improved by choosing the proper phase shifts with significant differences of RSS values among adjacent locations. However, it is challenging to select the optimal phase shifts because the decision function for location estimation and the phase shifts are coupled. To tackle this challenge, we formulate the optimization problem for the RIS-aided localization, derive the optimal decision function, and design the phase shift optimization (PSO) algorithm to solve the formulated problem efficiently. Analysis of the proposed RIS aided technique is provided, and the effectiveness is validated through simulation.
△ Less
Submitted 24 March, 2023; v1 submitted 18 November, 2020;
originally announced November 2020.
-
MetaRadar: Indoor Localization by Reconfigurable Metamaterials
Authors:
Haobo Zhang,
**gzhi Hu,
Hongliang Zhang,
Boya Di,
Kaigui Bian,
Zhu Han,
Lingyang Song
Abstract:
Indoor localization has drawn much attention owing to its potential for supporting location based services. Among various indoor localization techniques, the received signal strength (RSS) based technique is widely researched. However, in conventional RSS based systems where the radio environment is unconfigurable, adjacent locations may have similar RSS values, which limits the localization preci…
▽ More
Indoor localization has drawn much attention owing to its potential for supporting location based services. Among various indoor localization techniques, the received signal strength (RSS) based technique is widely researched. However, in conventional RSS based systems where the radio environment is unconfigurable, adjacent locations may have similar RSS values, which limits the localization precision. In this paper, we present MetaRadar, which explores reconfigurable radio reflection with a surface/plane made of metamaterial units for multi-user localization. By changing the reflectivity of metamaterial, MetaRadar modifies the radio channels at different locations, and improves localization accuracy by making RSS values at adjacent locations have significant differences. However, in MetaRadar, it is challenging to build radio maps for all the radio environments generated by metamaterial units and select suitable maps from all the possible maps to realize a high accuracy localization. To tackle this challenge, we propose a compressive construction technique which can predict all the possible radio maps, and propose a configuration optimization algorithm to select favorable metamaterial reflectivities and the corresponding radio maps. The experimental results show a significant improvement from a decimeter-level localization error in the traditional RSS-based systems to a centimeter-level one in MetaRadar.
△ Less
Submitted 24 March, 2023; v1 submitted 6 August, 2020;
originally announced August 2020.
-
Towards Ubiquitous Positioning by Leveraging Reconfigurable Intelligent Surface
Authors:
Haobo Zhang,
Hongliang Zhang,
Boya Di,
Kaigui Bian,
Zhu Han,
Lingyang Song
Abstract:
The received signal strength (RSS) based technique is widely utilized for ubiquitous positioning due to its advantage of simple implementability. However, its accuracy is limited because the RSS values of adjacent locations can be very difficult to distinguish. Against this background, we propose the novel RSS-based positioning scheme enabled by reconfigurable intelligent surface (RIS). By modifyi…
▽ More
The received signal strength (RSS) based technique is widely utilized for ubiquitous positioning due to its advantage of simple implementability. However, its accuracy is limited because the RSS values of adjacent locations can be very difficult to distinguish. Against this background, we propose the novel RSS-based positioning scheme enabled by reconfigurable intelligent surface (RIS). By modifying the reflection coefficient of the RIS, the propagation channels are programmed in such a way that the differences between the RSS values of adjacent locations can be enlarged to improve the positioning accuracy. New challenge lies in the selection of suitable reflection coefficients for high-accuracy positioning. To tackle this challenge, we formulate the RIS-aided positioning problem and design an iterative algorithm to solve the problem. The effectiveness of the proposed positioning scheme is validated through simulations.
△ Less
Submitted 24 March, 2023; v1 submitted 9 July, 2020;
originally announced July 2020.
-
Rethinking Irregular Scene Text Recognition
Authors:
Shangbang Long,
Yushuo Guan,
Bingxuan Wang,
Kaigui Bian,
Cong Yao
Abstract:
Reading text from natural images is challenging due to the great variety in text font, color, size, complex background and etc.. The perspective distortion and non-linear spatial arrangement of characters make it further difficult. While rectification based method is intuitively grounded and has pushed the envelope by far, its potential is far from being well exploited. In this paper, we present a…
▽ More
Reading text from natural images is challenging due to the great variety in text font, color, size, complex background and etc.. The perspective distortion and non-linear spatial arrangement of characters make it further difficult. While rectification based method is intuitively grounded and has pushed the envelope by far, its potential is far from being well exploited. In this paper, we present a bag of tricks that prove to significantly improve the performance of rectification based method. On curved text dataset, our method achieves an accuracy of 89.6% on CUTE-80 and 76.3% on Total-Text, an improvement over previous state-of-the-art by 6.3% and 14.7% respectively. Furthermore, our combination of tricks helps us win the ICDAR 2019 Arbitrary-Shaped Text Challenge (Latin script), achieving an accuracy of 74.3% on the held-out test set. We release our code as well as data samples for further exploration at https://github.com/Jyouhou/ICDAR2019-ArT-Recognition-Alchemy
△ Less
Submitted 11 November, 2019; v1 submitted 30 August, 2019;
originally announced August 2019.
-
ImgSensingNet: UAV Vision Guided Aerial-Ground Air Quality Sensing System
Authors:
Yuzhe Yang,
Zhiwen Hu,
Kaigui Bian,
Lingyang Song
Abstract:
Given the increasingly serious air pollution problem, the monitoring of air quality index (AQI) in urban areas has drawn considerable attention. This paper presents ImgSensingNet, a vision guided aerial-ground sensing system, for fine-grained air quality monitoring and forecasting using the fusion of haze images taken by the unmanned-aerial-vehicle (UAV) and the AQI data collected by an on-ground…
▽ More
Given the increasingly serious air pollution problem, the monitoring of air quality index (AQI) in urban areas has drawn considerable attention. This paper presents ImgSensingNet, a vision guided aerial-ground sensing system, for fine-grained air quality monitoring and forecasting using the fusion of haze images taken by the unmanned-aerial-vehicle (UAV) and the AQI data collected by an on-ground three-dimensional (3D) wireless sensor network (WSN). Specifically, ImgSensingNet first leverages the computer vision technique to tell the AQI scale in different regions from the taken haze images, where haze-relevant features and a deep convolutional neural network (CNN) are designed for direct learning between haze images and corresponding AQI scale. Based on the learnt AQI scale, ImgSensingNet determines whether to wake up on-ground wireless sensors for small-scale AQI monitoring and inference, which can greatly reduce the energy consumption of the system. An entropy-based model is employed for accurate real-time AQI inference at unmeasured locations and future air quality distribution forecasting. We implement and evaluate ImgSensingNet on two university campuses since Feb. 2018, and has collected 17,630 photos and 2.6 millions of AQI data samples. Experimental results confirm that ImgSensingNet can achieve higher inference accuracy while greatly reduce the energy consumption, compared to state-of-the-art AQI monitoring approaches.
△ Less
Submitted 27 May, 2019;
originally announced May 2019.
-
Real-Time Prediction for Fine-Grained Air Quality Monitoring System with Asynchronous Sensing
Authors:
Zixuan Bai,
Zhiwen Hu,
Kaigui Bian,
Lingyang Song
Abstract:
Due to the significant air pollution problem, monitoring and prediction for air quality have become increasingly necessary. To provide real-time fine-grained air quality monitoring and prediction in urban areas, we have established our own Internet-of-Things-based sensing system in Peking University. Due to the energy constraint of the sensors, it is preferred that the sensors wake up alternativel…
▽ More
Due to the significant air pollution problem, monitoring and prediction for air quality have become increasingly necessary. To provide real-time fine-grained air quality monitoring and prediction in urban areas, we have established our own Internet-of-Things-based sensing system in Peking University. Due to the energy constraint of the sensors, it is preferred that the sensors wake up alternatively in an asynchronous pattern, which leads to a sparse sensing dataset. In this paper, we propose a novel approach to predict the real-time fine-grained air quality based on asynchronous sensing. The sparse dataset and the spatial-temporal-meteorological relations are modeled into the correlation graph, in which way the prediction procedures are carefully designed. The advantage of the proposed solution over existing ones is evaluated over the dataset collected by our air quality monitoring system.
△ Less
Submitted 6 November, 2018;
originally announced November 2018.
-
Cellular V2X in Unlicensed Spectrum: Harmonious Coexistence with VANET in 5G systems
Authors:
Pengfei Wang,
Boya Di,
Hongliang Zhang,
Kaigui Bian,
Lingyang Song
Abstract:
With the increasing demand for vehicular data transmission, limited dedicated cellular spectrum becomes a bottleneck to satisfy the requirements of all cellular vehicle-to-everything (V2X) users. To address this issue, unlicensed spectrum is considered to serve as the complement to support cellular V2X users. In this paper, we study the coexistence problem of cellular V2X users and vehicular ad-ho…
▽ More
With the increasing demand for vehicular data transmission, limited dedicated cellular spectrum becomes a bottleneck to satisfy the requirements of all cellular vehicle-to-everything (V2X) users. To address this issue, unlicensed spectrum is considered to serve as the complement to support cellular V2X users. In this paper, we study the coexistence problem of cellular V2X users and vehicular ad-hoc network~(VANET) users over the unlicensed spectrum. To facilitate the coexistence, we design an energy sensing based spectrum sharing scheme, where cellular V2X users are able to access the unlicensed channels fairly while reducing the data transmission collisions between cellular V2X and VANET users. In order to maximize the number of active cellular V2X users, we formulate the scheduling and resource allocation problem as a two-sided many-to-many matching with peer effects. We then propose a dynamic vehicle-resource matching algorithm (DV-RMA) and present the analytical results on the convergence time and computational complexity. Simulation results show that the proposed algorithm outperforms existing approaches in terms of the performance of cellular V2X system when the unlicensed spectrum is utilized.
△ Less
Submitted 17 December, 2017; v1 submitted 13 December, 2017;
originally announced December 2017.
-
Realtime Profiling of Fine-Grained Air Quality Index Distribution using UAV Sensing
Authors:
Yuzhe Yang,
Zijie Zheng,
Kaigui Bian,
Lingyang Song,
Zhu Han
Abstract:
Given significant air pollution problems, air quality index (AQI) monitoring has recently received increasing attention. In this paper, we design a mobile AQI monitoring system boarded on unmanned-aerial-vehicles (UAVs), called ARMS, to efficiently build fine-grained AQI maps in realtime. Specifically, we first propose the Gaussian plume model on basis of the neural network (GPM-NN), to physically…
▽ More
Given significant air pollution problems, air quality index (AQI) monitoring has recently received increasing attention. In this paper, we design a mobile AQI monitoring system boarded on unmanned-aerial-vehicles (UAVs), called ARMS, to efficiently build fine-grained AQI maps in realtime. Specifically, we first propose the Gaussian plume model on basis of the neural network (GPM-NN), to physically characterize the particle dispersion in the air. Based on GPM-NN, we propose a battery efficient and adaptive monitoring algorithm to monitor AQI at the selected locations and construct an accurate AQI map with the sensed data. The proposed adaptive monitoring algorithm is evaluated in two typical scenarios, a two-dimensional open space like a roadside park, and a three-dimensional space like a courtyard inside a building. Experimental results demonstrate that our system can provide higher prediction accuracy of AQI with GPM-NN than other existing models, while greatly reducing the power consumption with the adaptive monitoring algorithm.
△ Less
Submitted 7 November, 2017;
originally announced November 2017.