Showing 1–8 of 8 results for author: Barazideh, R

Reinforcement Learning for Mitigating Intermittent Interference in Terahertz Communication Networks

Authors: Reza Barazideh, Omid Semiari, Solmaz Niknam, Balasubramaniam Natarajan

Abstract: Emerging wireless services with extremely high data rate requirements, such as real-time extended reality applications, mandate novel solutions to further increase the capacity of future wireless networks. In this regard, leveraging large available bandwidth at terahertz frequency bands is seen as a key enabler. To overcome the large propagation loss at these very high frequencies, it is inevitabl… ▽ More Emerging wireless services with extremely high data rate requirements, such as real-time extended reality applications, mandate novel solutions to further increase the capacity of future wireless networks. In this regard, leveraging large available bandwidth at terahertz frequency bands is seen as a key enabler. To overcome the large propagation loss at these very high frequencies, it is inevitable to manage transmissions over highly directional links. However, uncoordinated directional transmissions by a large number of users can cause substantial interference in terahertz networks. While such interference will be received over short random time intervals, the received power can be large. In this work, a new framework based on reinforcement learning is proposed that uses an adaptive multi-thresholding strategy to efficiently detect and mitigate the intermittent interference from directional links in the time domain. To find the optimal thresholds, the problem is formulated as a multidimensional multi-armed bandit system. Then, an algorithm is proposed that allows the receiver to learn the optimal thresholds with very low complexity. Another key advantage of the proposed approach is that it does not rely on any prior knowledge about the interference statistics, and hence, it is suitable for interference mitigation in dynamic scenarios. Simulation results confirm the superior bit-error-rate performance of the proposed method compared with two traditional time-domain interference mitigation approaches. △ Less

Submitted 10 March, 2020; originally announced March 2020.

Comments: 2020 IEEE International Conference on Communications (ICC)

Impulsive Noise Mitigation in Underwater Acoustic Communication Systems: Experimental Studies

Authors: Reza Barazideh, Wensheng Sun, Balasubramaniam Natarajan, Alexei V. Nikitin, Zhaohui Wang

Abstract: Impulsive noise is a major impediment to orthogonal frequency-division multiplexing (OFDM) based underwater acoustic (UWA) communications. In this work, we evaluate the performance of a memoryless analog nonlinear preprocessor (MANP) that is used to mitigate outliers. The proposed MANP exhibits intermittent nonlinearity only in the presence of the impulsive noise and suppresses the power of outlie… ▽ More Impulsive noise is a major impediment to orthogonal frequency-division multiplexing (OFDM) based underwater acoustic (UWA) communications. In this work, we evaluate the performance of a memoryless analog nonlinear preprocessor (MANP) that is used to mitigate outliers. The proposed MANP exhibits intermittent nonlinearity only in the presence of the impulsive noise and suppresses the power of outliers based on their amplitudes. Since the outliers are distinguishable in the analog domain prior to anti-aliasing filtering, the MANP outperforms its digital counterparts in all scenarios. Experimental results using data collected in an under-ice environment, demonstrate the superior BER performance of our approach relative to classical nonlinear approaches such as blanking and clip**. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: Accepted in IEEE CCWC 2019

Impulsive Noise Detection in OFDM-based Systems: A Deep Learning Perspective

Authors: Reza Barazideh, Solmaz Niknam, Balasubramaniam Natarajan

Abstract: Efficient removal of impulsive noise (IN) from received signal is essential in many communication applications. In this paper, we propose a two stage IN mitigation approach for orthogonal frequency-division multiplexing (OFDM)-based communication systems. In the first stage, a deep neural network (DNN) is used to detect the instances of impulsivity. Then, the detected IN is blanked in the suppress… ▽ More Efficient removal of impulsive noise (IN) from received signal is essential in many communication applications. In this paper, we propose a two stage IN mitigation approach for orthogonal frequency-division multiplexing (OFDM)-based communication systems. In the first stage, a deep neural network (DNN) is used to detect the instances of impulsivity. Then, the detected IN is blanked in the suppression stage to alleviate the harmful effects of outliers. Simulation results demonstrate the superior bit error rate (BER) performance of this approach relative to classic approaches such as blanking and clip** that use threshold to detect the IN. We demonstrate the robustness of the DNN-based approach under (i) mismatch between IN models considered for training and testing, and (ii) bursty impulsive environment when the receiver is empowered with interleaving techniques. △ Less

Submitted 2 January, 2019; originally announced January 2019.

Comments: Accepted in IEEE CCWC 2019

Performance Analysis of Analog Intermittently Nonlinear Filter in the Presence of Impulsive Noise

Authors: Reza Barazideh, Balasubramaniam Natarajan, Alexei V. Nikitin, Solmaz Niknam

Abstract: An Adaptive Nonlinear Differential Limiter (ANDL) is proposed in this paper to efficiently alleviate the impact of impulsive noise (IN) in a communication system. Unlike existing nonlinear methods, the ANDL is implemented in the analog domain where the broader acquisition bandwidth makes outliers more detectable and consequently it is easier to remove them. While the proposed ANDL behaves like a l… ▽ More An Adaptive Nonlinear Differential Limiter (ANDL) is proposed in this paper to efficiently alleviate the impact of impulsive noise (IN) in a communication system. Unlike existing nonlinear methods, the ANDL is implemented in the analog domain where the broader acquisition bandwidth makes outliers more detectable and consequently it is easier to remove them. While the proposed ANDL behaves like a linear filter when there is no outlier, it exhibits intermittent nonlinearity in response to IN. Therefore, the structure of the matched filter in the receiver is modified to compensate the filtering effect of the ANDL in the linear regime. In this paper, we quantify the performance of the ANDL by deriving a closed-form analytical bound for the average signal-to-noise ratio (SNR) at the output of the filter. The calculation is based on the idea that the ANDL can be perceived as a time-variant linear filter whose bandwidth is modified based on the intensity of the IN. In addition, by linearizing the filter time parameter variations, we treat the ANDL as a set of linear filters where the exact operating filter at a given time depends upon the magnitude of the outliers. The theoretical average bit error rate (BER) is validated through simulations and the performance gains relative to classical methods such as blanking and clip** are quantified. △ Less

Submitted 21 November, 2018; originally announced November 2018.

Comments: Accepted in IEEE Transactions on Vehicular Technology

Cross-layer Interference Modeling for 5G MmWave Networks in the Presence of Blockage

Authors: Solmaz Niknam, Reza Barazideh, Balasubramaniam Natarajan

Abstract: Fifth generation (5G) wireless technology is expected to utilize highly directive antennas at millimeter wave (mmWave) spectrum to offer higher data rates. However, given the high directivity of antennas and adverse propagation characteristics at mmWave frequencies, these signals are very susceptible to obstacles. One of the important factors that are highly impacted is interference behavior. In f… ▽ More Fifth generation (5G) wireless technology is expected to utilize highly directive antennas at millimeter wave (mmWave) spectrum to offer higher data rates. However, given the high directivity of antennas and adverse propagation characteristics at mmWave frequencies, these signals are very susceptible to obstacles. One of the important factors that are highly impacted is interference behavior. In fact, signals received from other terminals can be easily blocked or attenuated at the receiver. In addition, higher number of terminals can transmit signals without introducing much interference and hence the traffic behavior, maintained by medium access control (MAC) layer, may change. In this paper, we provide an interference model to evaluate the interference power received at the physical layer of the receiving terminal, considering antenna directivity, effect of obstacles and MAC layer constraints that control the number of terminals transmitting simultaneously. We first develop a blockage model and then derive the Laplace transform of the interference power received at a typical receiving node. Subsequently, using the derived Laplace transform, we evaluate the network error performance using average bit-error-rate (BER). Analytical results are validated via Monte-Carlo simulations. △ Less

Submitted 11 July, 2018; originally announced July 2018.

Comments: Accepted for publication in VTC2018-Fall

Practical Implementation of Adaptive Analog Nonlinear Filtering For Impulsive Noise Mitigation

Authors: Reza Barazideh, Alexei V. Nikitin, Balasubramaniam Natarajan

Abstract: It is well known that the performance of OFDM-based Powerline Communication (PLC) systems is impacted by impulsive noise. In this work, we propose a practical blind adaptive analog nonlinear filter to efficiently detect and mitigate impulsive noise. Specially, we design an Adaptive Canonical Differential Limiter (ACDL) which is constructed from a Clipped Mean Tracking Filter (CMTF) and Quartile Tr… ▽ More It is well known that the performance of OFDM-based Powerline Communication (PLC) systems is impacted by impulsive noise. In this work, we propose a practical blind adaptive analog nonlinear filter to efficiently detect and mitigate impulsive noise. Specially, we design an Adaptive Canonical Differential Limiter (ACDL) which is constructed from a Clipped Mean Tracking Filter (CMTF) and Quartile Tracking Filters (QTFs). The QTFs help to determine a real-time range that excludes outliers. This range is fed into the CMTF which is responsible for mitigating impulsive noise. The CMTF is a nonlinear analog filter and its nonlinearity is controlled by the aforementioned range. Proper selection of this range ensures the improvement of the desired signal quality in impulsive environment. It is important to note that the proposed ACDL behaves like a linear filter in case of no impulsive noise. In this context, the traditional matched filter construction is modified to ensure distortionless processing of the desired signal. The performance improvement of the proposed ACDL is due to the fact that unlike other nonlinear methods, the ACDL is implemented in the analog domain where the outliers are still broadband and distinguishable. Simulation results in PRIME (OFDM-based narrowband PLC system) demonstrate the superior BER performance of ACDL relative to other nonlinear approaches such as blanking and clip** in impulsive noise environments. △ Less

Submitted 1 March, 2018; originally announced March 2018.

Comments: This paper has been accepted in IEEE International Conference on Communications (ICC) 2018. arXiv admin note: text overlap with arXiv:1712.03267

Performance of Analog Nonlinear Filtering for Impulsive Noise Mitigation in OFDM-based PLC Systems

Authors: Reza Barazideh, Balasubramaniam Natarajan, Alexei V. Nikitin, Ruslan L. Davidchack

Abstract: Asynchronous and cyclostationary impulsive noise can severely impact the bit-error-rate (BER) of OFDM-based powerline communication systems. In this paper, we analyze an adaptive nonlinear analog front end filter that mitigates various types of impulsive noise without detrimental effects such as self-interference and out-of-band power leakage caused by other nonlinear approaches like clip** and… ▽ More Asynchronous and cyclostationary impulsive noise can severely impact the bit-error-rate (BER) of OFDM-based powerline communication systems. In this paper, we analyze an adaptive nonlinear analog front end filter that mitigates various types of impulsive noise without detrimental effects such as self-interference and out-of-band power leakage caused by other nonlinear approaches like clip** and blanking. Our proposed Adaptive Nonlinear Differential Limiter (ANDL) is constructed from a linear analog filter by applying a feedback-based nonlinearity, controlled by a single resolution parameter. We present a simple practical method to find the value of this resolution parameter that ensures the mitigation of impulsive without impacting the desired OFDM signal. Unlike many prior approaches for impulsive noise mitigation that assume a statistical noise model, ANDL is blind to the exact nature of the noise distribution, and is designed to be fully compatible with existing linear front end filters. We demonstrate the potency of ANDL by simulating the OFDM-based narrowband PLC compliant with the IEEE standards. We show that the proposed ANDL outperforms other approaches in reducing the BER in impulsive noise environments. △ Less

Submitted 8 December, 2017; originally announced December 2017.

Comments: This paper has been accepted and presented in Latincom 2017

A Spatial-Spectral Interference Model for Dense Finite-Area 5G mmWave Networks

Authors: Solmaz Niknam, Balasubramaniam Natarajan, Reza Barazideh

Abstract: With the overcrowded sub-6 GHz bands, millimeter wave (mmWave) bands offer a promising alternative for the next generation wireless standard, i.e., 5G. However, the susceptibility of mmWave signals to severe pathloss and shadowing requires the use of highly directional antennas to overcome such adverse characteristics. Building a network with directional beams changes the interference behavior, si… ▽ More With the overcrowded sub-6 GHz bands, millimeter wave (mmWave) bands offer a promising alternative for the next generation wireless standard, i.e., 5G. However, the susceptibility of mmWave signals to severe pathloss and shadowing requires the use of highly directional antennas to overcome such adverse characteristics. Building a network with directional beams changes the interference behavior, since, narrow beams are vulnerable to blockages. Such sensitivity to blockages causes uncertainty in the active interfering node locations. Configuration uncertainty may also manifest in the spectral domain while applying dynamic channel and frequency assignment to support 5G applications. In this paper, we first propose a blockage model considering mmWave specifications. Subsequently, using the proposed blockage model, we derive a spatial-spectral interference model for dense finite-area 5G mmWave networks. The proposed interference model considers both spatial and spectral randomness in node configuration. Finally, the error performance of the network from an arbitrarily located user perspective is calculated in terms of bit error rate (BER) and outage probability metrics. The analytical results are validated via Monte-Carlo simulations. It is shown that considering mmWave specifications and also randomness in both spectral and spatial node configurations leads to a noticeably different interference profile. △ Less

Submitted 11 October, 2017; originally announced October 2017.