-
A step towards digital operations -- A novel grey-box approach for modelling the heat dynamics of Ultra-low temperature freezing chambers
Authors:
Tao Huang,
Peder Bacher,
Jan Kloppenborg Møller,
Francesco D'Ettorre,
Wiebke Brix Markussen
Abstract:
Ultra-low temperature (ULT) freezers store perishable bio-contents and have high energy consumption, which highlight a demand for reliable methods for intelligent surveillance and smart energy management. This study introduces a novel grey-box modelling approach based on stochastic differential equations to describe the heat dynamics of the ULT freezing chambers. The proposed modelling approach on…
▽ More
Ultra-low temperature (ULT) freezers store perishable bio-contents and have high energy consumption, which highlight a demand for reliable methods for intelligent surveillance and smart energy management. This study introduces a novel grey-box modelling approach based on stochastic differential equations to describe the heat dynamics of the ULT freezing chambers. The proposed modelling approach only requires temperature data measured by the embedded sensors and uses data from the regular operation periods for model identification. The model encompasses three states: chamber temperature, envelope temperature, and local evaporator temperature. Special attention is given to the local evaporator temperature state, which is modelled as a time-variant system, to characterize the time delay and dynamic variations in cooling intensity. Two ULT freezers with different operational patterns are modelled. The unknown model parameters are estimated using the maximum likelihood method. The results demonstrate that the models can accurately predict the chamber temperature measured by the control probe (RMSE < 0.19 °C) and are promising to be applied for forecasting future states. In addition, the model for local evaporator temperature can effectively adapt to different operational patterns and provide insight into the local cooling supply status. The proposed approach greatly promotes the practical feasibility of grey-box modelling of the heat dynamics for ULT freezers and can serve several potential digital applications. A major limitation of the modelling approach is the low identifiability, which can potentially be addressed by inferring model parameters based on relative parameter changes.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
Estimation of Evaporator Valve Sizes in Supermarket Refrigeration Cabinets
Authors:
Kenneth Leerbeck,
Peder Bacher,
Christian Heerup,
Henrik Madsen
Abstract:
In many applications, e.g. fault diagnostics and optimized control of supermarket refrigeration systems, it is important to determine the heat demand of the cabinets. This can easily be achieved by measuring the mass flow through each cabinet, however, that is expensive and not feasible in large-scale deployments. Therefore it is important to be able to estimate the valve sizes from the monitoring…
▽ More
In many applications, e.g. fault diagnostics and optimized control of supermarket refrigeration systems, it is important to determine the heat demand of the cabinets. This can easily be achieved by measuring the mass flow through each cabinet, however, that is expensive and not feasible in large-scale deployments. Therefore it is important to be able to estimate the valve sizes from the monitoring data, which is typically measured. The valve size is measured by an area, which can be used to calculate mass flow through the valve -- this estimated value is referred to as the valve constant. A novel method for estimating the cabinet evaporator valve constants is proposed in the present paper. It is demonstrated using monitoring data from a refrigeration system in a supermarket consisting of data sampled at a one-minute sampling rate, however it is shown that a sampling time of around 10-20 minutes is adequate for the method. Through thermodynamic analysis of a two-stage CO2 refrigeration system, a linear regression model for estimating valve constants was developed using time series data. The linear regression requires that transient dynamics are not present in the data, which depends on multiple factors e.g. the sampling time. If dynamics are not modeled it can be detected by a significant auto-correlation of the residuals. In order to include the dynamics in the model, an Auto-Regressive Moving Average model with eXogenous variables (ARMAX) was applied, and it is shown how it effectively eliminates the auto-correlation and provides more unbiased estimates, as well as improved the accuracy estimates. Furthermore, it is shown that the sample time has a huge impact on the valve estimates. Thus, a method for selecting the optimal sampling time is introduced. It works individually for each of the evaporators, by exploring their respective frequency spectrum.
△ Less
Submitted 21 February, 2022;
originally announced February 2022.
-
Control of heat pumps with CO2 emission intensity forecasts
Authors:
Kenneth Leerbeck,
Peder Bacher,
Rune Grønborg,
Anna Tveit,
Olivier Corradi,
Henrik Madsen
Abstract:
An optimized heat pump control for building heating was developed for minimizing CO2 emissions from related electrical power generation. The control is using weather and CO2 emission forecasts as input to a Model Predictive Control (MPC) - a multivariate control algorithm using a dynamic process model, constraints and a cost function to be minimized. In a simulation study the control was applied u…
▽ More
An optimized heat pump control for building heating was developed for minimizing CO2 emissions from related electrical power generation. The control is using weather and CO2 emission forecasts as input to a Model Predictive Control (MPC) - a multivariate control algorithm using a dynamic process model, constraints and a cost function to be minimized. In a simulation study the control was applied using weather and power grid conditions during a full year period in 2017-2018 for the power bidding zone DK2 (East, Denmark). Two scenarios were studied; one with a family house and one with an office building. The buildings were dimensioned on the basis of standards and building codes. The main results are measured as the CO2 emission savings relative to a classical thermostatic control. Note that this only measures the gain achieved using the MPC control, i.e. the energy flexibility, not the absolute savings. The results show that around 16% savings could have been achieved during the period in well insulated new buildings with floor heating.
Further, a sensitivity analysis was carried out to evaluate the effect of various building properties, e.g. level of insulation and thermal capacity. Danish building codes from 1977 and forward was used as benchmarks for insulation levels. It was shown that both insulation and thermal mass influence the achievable flexibility savings, especially for floor heating. Buildings that comply with codes later than 1979 could provide flexibility emission savings of around 10%, while buildings that comply with earlier codes provided savings in the range of 0-5% depending on the heating system and thermal mass.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Short-Term Forecasting of CO2 Emission Intensity in Power Grids by Machine Learning
Authors:
Kenneth Leerbeck,
Peder Bacher,
Rune Junker,
Goran Goranović,
Olivier Corradi,
Razgar Ebrahimy,
Anna Tveit,
Henrik Madsen
Abstract:
A machine learning algorithm is developed to forecast the CO2 emission intensities in electrical power grids in the Danish bidding zone DK2, distinguishing between average and marginal emissions. The analysis was done on data set comprised of a large number (473) of explanatory variables such as power production, demand, import, weather conditions etc. collected from selected neighboring zones. Th…
▽ More
A machine learning algorithm is developed to forecast the CO2 emission intensities in electrical power grids in the Danish bidding zone DK2, distinguishing between average and marginal emissions. The analysis was done on data set comprised of a large number (473) of explanatory variables such as power production, demand, import, weather conditions etc. collected from selected neighboring zones. The number was reduced to less than 50 using both LASSO (a penalized linear regression analysis) and a forward feature selection algorithm. Three linear regression models that capture different aspects of the data (non-linearities and coupling of variables etc.) were created and combined into a final model using Softmax weighted average. Cross-validation is performed for debiasing and autoregressive moving average model (ARIMA) implemented to correct the residuals, making the final model the variant with exogenous inputs (ARIMAX). The forecasts with the corresponding uncertainties are given for two time horizons, below and above six hours. Marginal emissions came up independent of any conditions in the DK2 zone, suggesting that the marginal generators are located in the neighbouring zones.
The developed methodology can be applied to any bidding zone in the European electricity network without requiring detailed knowledge about the zone.
△ Less
Submitted 10 March, 2020;
originally announced March 2020.
