-
Received Power Maximization Using Nonuniform Discrete Phase Shifts for RISs With a Limited Phase Range
Authors:
Dogan Kutay Pekcan,
Hongyi Liao,
Ender Ayanoglu
Abstract:
To maximize the received power at a user equipment, the problem of optimizing a reconfigurable intelligent surface (RIS) with a limited phase range R and nonuniform discrete phase shifts with adjustable gains is addressed. Necessary and sufficient conditions to achieve this maximization are given. These conditions are employed in two algorithms to achieve the global optimum in linear time for R {\…
▽ More
To maximize the received power at a user equipment, the problem of optimizing a reconfigurable intelligent surface (RIS) with a limited phase range R and nonuniform discrete phase shifts with adjustable gains is addressed. Necessary and sufficient conditions to achieve this maximization are given. These conditions are employed in two algorithms to achieve the global optimum in linear time for R {\ge} π and R < π, where R is the RIS phase range. With a total number of N(2K +1) complex vector additions, it is shown for R {\ge} π and R < π that the global optimality is achieved in NK or fewer and N(K +1) or fewer steps, respectively, where N is the number of RIS elements and K is the number of discrete phase shifts which may be placed nonuniformly over the phase range R. In addition, we define an intuitive quantization algorithm that we call the nonuniform polar quantization (NPQ) algorithm. With NPQ, we provide a closed form solution for the approximation ratio with which an arbitrary set of nonuniform discrete phase shifts can approximate the continuous solution. We also show that with a phase range limitation, equal separation among the nonuniform discrete phase shifts maximizes the normalized performance. Furthermore, we show that the gain of using K {\ge} 3 with R < π/2 and K {\ge} 4 with R < π is only marginal. Finally, we reveal that when R < 2π/3, ON/OFF selection for the RIS elements brings significant performance compared to the case when the RIS elements are strictly ON.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Self-Supervised RF Signal Representation Learning for NextG Signal Classification with Deep Learning
Authors:
Kemal Davaslioglu,
Serdar Boztas,
Mehmet Can Ertem,
Yalin E. Sagduyu,
Ender Ayanoglu
Abstract:
Deep learning (DL) finds rich applications in the wireless domain to improve spectrum awareness. Typically, DL models are either randomly initialized following a statistical distribution or pretrained on tasks from other domains in the form of transfer learning without accounting for the unique characteristics of wireless signals. Self-supervised learning (SSL) enables the learning of useful repre…
▽ More
Deep learning (DL) finds rich applications in the wireless domain to improve spectrum awareness. Typically, DL models are either randomly initialized following a statistical distribution or pretrained on tasks from other domains in the form of transfer learning without accounting for the unique characteristics of wireless signals. Self-supervised learning (SSL) enables the learning of useful representations from Radio Frequency (RF) signals themselves even when only limited training data samples with labels are available. We present a self-supervised RF signal representation learning method and apply it to the automatic modulation recognition (AMR) task by specifically formulating a set of transformations to capture the wireless signal characteristics. We show that the sample efficiency (the number of labeled samples needed to achieve a certain performance) of AMR can be significantly increased (almost an order of magnitude) by learning signal representations with SSL. This translates to substantial time and cost savings. Furthermore, SSL increases the model accuracy compared to the state-of-the-art DL methods and maintains high accuracy when limited training data is available.
△ Less
Submitted 1 November, 2022; v1 submitted 6 July, 2022;
originally announced July 2022.
-
Gaussian Kernel Variance For an Adaptive Learning Method on Signals Over Graphs
Authors:
Yue Zhao,
Ender Ayanoglu
Abstract:
This paper discusses a special kind of a simple yet possibly powerful algorithm, called single-kernel Gradraker (SKG), which is an adaptive learning method predicting unknown nodal values in a network using known nodal values and the network structure. We aim to find out how to configure the special kind of the model in applying the algorithm. To be more specific, we focus on SKG with a Gaussian k…
▽ More
This paper discusses a special kind of a simple yet possibly powerful algorithm, called single-kernel Gradraker (SKG), which is an adaptive learning method predicting unknown nodal values in a network using known nodal values and the network structure. We aim to find out how to configure the special kind of the model in applying the algorithm. To be more specific, we focus on SKG with a Gaussian kernel and specify how to find a suitable variance for the kernel. To do so, we introduce two variables with which we are able to set up requirements on the variance of the Gaussian kernel to achieve (near-) optimal performance and can better understand how SKG works. Our contribution is that we introduce two variables as analysis tools, illustrate how predictions will be affected under different Gaussian kernels, and provide an algorithm finding a suitable Gaussian kernel for SKG with knowledge about the training network. Simulation results on real datasets are provided.
△ Less
Submitted 26 April, 2022;
originally announced April 2022.
-
Wave-Controlled Metasurface-Based Reconfigurable Intelligent Surfaces
Authors:
Ender Ayanoglu,
Filippo Capolino,
A. Lee Swindlehurst
Abstract:
Reconfigurable Intelligent Surfaces (RISs) are programmable metasurfaces that can adaptively steer received electromagnetic energy in desired directions by employing controllable phase shifting cells. Among other uses, an RIS can modify the propagation environment in order to provide wireless access to user locations that are not otherwise reachable by a base station. Alternatively, an RIS can ste…
▽ More
Reconfigurable Intelligent Surfaces (RISs) are programmable metasurfaces that can adaptively steer received electromagnetic energy in desired directions by employing controllable phase shifting cells. Among other uses, an RIS can modify the propagation environment in order to provide wireless access to user locations that are not otherwise reachable by a base station. Alternatively, an RIS can steer the waves away from particular locations in space, to eliminate interference and allow for co-existence of the wireless network with other types of fixed wireless services (e.g., radars, unlicensed radio bands, etc.). The novel approach in this work is a wave-controlled architecture that properly accounts for the maximum possible change in the local reflection phase that can be achieved by adjacent RIS elements. It obviates the need for dense wiring and signal paths that would be required for individual control of every RIS element, and thus offers a substantial reduction in the required hardware. We specify this wave-controlled RIS architecture in detail and discuss signal processing and machine learning methods that exploit it in both point-to-point and multicell MIMO systems. Such implementations can lead to a dramatic improvement in next-generation wireless, radar, and navigation systems where RIS finds wide applications. They have the potential to improve the efficiency of spectrum utilization and coexistence by orders of magnitude.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Diversity Analysis of Millimeter-Wave OFDM Massive MIMO Systems
Authors:
Sadjad Sedighi,
Ender Ayanoglu
Abstract:
We analyze the diversity gain for a distributed antenna subarray employing orthogonal frequency-division multiplexing (OFDM) in millimeter-wave (mm-Wave) massive multiple-input multiple-output (MIMO) systems. We show that the diversity gain depends on the number of transmitted data streams, the number of remote antenna units, and the number of propagation paths between RAUs. Furthermore, we show t…
▽ More
We analyze the diversity gain for a distributed antenna subarray employing orthogonal frequency-division multiplexing (OFDM) in millimeter-wave (mm-Wave) massive multiple-input multiple-output (MIMO) systems. We show that the diversity gain depends on the number of transmitted data streams, the number of remote antenna units, and the number of propagation paths between RAUs. Furthermore, we show that by using bit-interleaved coded multiple beamforming (BICMB), one can achieve the maximum diversity gain in a distributed antenna subarray system. The assumption in both scenarios is that the number of the antennas at the transmitter and the receiver are large enough and channel state information (CSI) is known at the transmitter and the receiver.
△ Less
Submitted 9 May, 2021;
originally announced May 2021.
-
Millimeter Wave Massive MIMO Downlink Per-Group Communications with Hybrid Linear Precoding
Authors:
Thomas Ketseoglou,
Matthew. C. Valenti,
Ender Ayanoglu
Abstract:
We address the problem of analyzing and classifying in groups the downlink channel environment in a millimeter-wavelength cell, accounting for path loss, multipath fading, and User Equipment (UE) blocking, by employing a hybrid propagation and multipath fading model, thus using accurate inter-group interference modeling. The base station (BS) employs a large Uniform Planar Array (UPA) to facilitat…
▽ More
We address the problem of analyzing and classifying in groups the downlink channel environment in a millimeter-wavelength cell, accounting for path loss, multipath fading, and User Equipment (UE) blocking, by employing a hybrid propagation and multipath fading model, thus using accurate inter-group interference modeling. The base station (BS) employs a large Uniform Planar Array (UPA) to facilitate massive Multiple-Input, Multiple-Output (MIMO) communications with high efficiency. UEs are equipped with a single antenna and are distributed uniformly within the cell. The key problem is analyzing and defining groups toward precoding. Because equitable type of throughput is desired between groups, Combined Frequency and Spatial Division and Multiplexing (CFSDM) prevails as necessary. We show that by employing three subcarrier frequencies, the UEs can be efficiently separated into high throughput groups, with each group employing Virtual Channel Model Beams (VCMB) based inner precoding, followed by efficient Multi-User Multiple-Input Multiple-Output (MU-MIMO) outer precoders. For each group, we study three different sub-grou** methods offering different advantages. We show that the improvement offered by Zero-Forcing Per-Group Precoding (ZF-PGP) over Zero-Forcing Precoding (ZFP) is very high.
△ Less
Submitted 4 February, 2020; v1 submitted 3 December, 2019;
originally announced December 2019.
-
First 20 Years of Green Radios
Authors:
Shunqing Zhang,
Shugong Xu,
Geoffrey Ye Li,
Ender Ayanoglu
Abstract:
Green radios jointly consider the spectrum efficiency and the energy efficiency in wireless networks in order to provide sustainable development. In the past two decades, various green radio solutions for different types of terminals and radio access networks have been developed, some of which have been used in the designs of wireless products. In this paper, we provide a historical view on some f…
▽ More
Green radios jointly consider the spectrum efficiency and the energy efficiency in wireless networks in order to provide sustainable development. In the past two decades, various green radio solutions for different types of terminals and radio access networks have been developed, some of which have been used in the designs of wireless products. In this paper, we provide a historical view on some fundamental works and practical issues. In addition to providing a comprehensive overview on theoretical achievements, we also discuss several important power saving solutions with notable engineering impacts, such as Doherty power amplifier and separated baseband unit - remote radio unit architecture, which might be overlooked in previous publications. Moreover, with the huge growth of wireless traffic in the near future, green radio design for future wireless networks shall involve an end-to-end energy efficiency investigation of mobile terminals, radio access and core networks, and different applications. By introducing green radio schemes for advanced terminals and future wireless networks, this article will not only be beneficial for readers with only preliminary background in communications and signal processing but also have reference and historical values for researchers and practical engineers in the area.
△ Less
Submitted 20 August, 2019;
originally announced August 2019.
-
LED Selection and MAP Detection for Generalized LED Index Modulation
Authors:
Manh Le Tran,
Sunghwan Kim,
Thomas Ketseoglou,
Ender Ayanoglu
Abstract:
In this paper, we propose light-emitting diode (LED) selection that can be applied not only to the conventional Multiple-Input Multiple-Output (MIMO) case, but also to a larger MIMO configuration of generalized LED index modulation (GLIM) system with optical orthogonal frequency division multiplexing (OFDM) in visible light communication (VLC). Moreover, we derive a simplified implementation of th…
▽ More
In this paper, we propose light-emitting diode (LED) selection that can be applied not only to the conventional Multiple-Input Multiple-Output (MIMO) case, but also to a larger MIMO configuration of generalized LED index modulation (GLIM) system with optical orthogonal frequency division multiplexing (OFDM) in visible light communication (VLC). Moreover, we derive a simplified implementation of the maximum a posteriori (MAP) detector when the number of LEDs is an even number larger than four. Simulation results show that the performance of MAP and LED selection is better than other detection algorithms for larger even numbers of LEDs and conventional GLIM for $4\times4$ transmission, respectively.
△ Less
Submitted 30 April, 2018;
originally announced May 2018.