-
On the Optimal MMSE Channel Estimation for One-Bit Quantized MIMO Systems
Authors:
Minhua Ding,
Italo Atzeni,
Antti Tölli,
A. Lee Swindlehurst
Abstract:
This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically s…
▽ More
This paper focuses on the minimum mean squared error (MMSE) channel estimator for multiple-input multiple-output (MIMO) systems with one-bit quantization at the receiver side. Despite its optimality and significance in estimation theory, the MMSE channel estimator has not been fully investigated in this context due to its general non-linearity and computational complexity. Instead, the typically suboptimal Bussgang linear MMSE (BLMMSE) estimator has been widely adopted. In this work, we develop a new framework to compute the MMSE channel estimator that hinges on computation of the orthant probability of the multivariate normal distribution. Based on this framework, we determine a necessary and sufficient condition for the BLMMSE channel estimator to be optimal and equivalent to the MMSE estimator. Under the assumption of specific channel correlation or pilot symbols, we further utilize the framework to derive analytical expressions for the MMSE channel estimator that are particularly convenient for computation when certain system dimensions become large, thereby enabling a comparison between the BLMMSE and MMSE channel estimators in these cases.
△ Less
Submitted 8 April, 2024;
originally announced April 2024.
-
Combined DL-UL Distributed Beamforming Design for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Antti Arvola,
Italo Atzeni,
Antti Tölli
Abstract:
We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL…
▽ More
We consider a cell-free massive multiple-input multiple-output system with multi-antenna access points (APs) and user equipments (UEs), where the UEs can be served in both the downlink (DL) and uplink (UL) within a resource block. We tackle the combined optimization of the DL precoders and combiners at the APs and DL UEs, respectively, together with the UL combiners and precoders at the APs and UL UEs, respectively. To this end, we propose distributed beamforming designs enabled by iterative bi-directional training (IBT) and based on the minimum mean squared error criterion. To reduce the IBT overhead and thus enhance the effective DL and UL rates, we carry out the distributed beamforming design by assuming that all the UEs are served solely in the DL and then utilize the obtained beamformers for the DL and UL data transmissions after proper scaling. Numerical results show the superiority of the proposed combined DL-UL distributed beamforming design over separate DL and UL designs, especially with short resource blocks.
△ Less
Submitted 4 April, 2024;
originally announced April 2024.
-
Metasurface-Based Receivers with $1$-bit ADCs for Multi-User Uplink Communications
Authors:
Panagiotis Gavriilidis,
Italo Atzeni,
George C. Alexandropoulos
Abstract:
The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as…
▽ More
The massive Multiple-Input Multiple-Output (mMIMO) concept has been recently moving forward to extreme scales to address the envisioned requirements of next generation networks. However, the extension of conventional architectures will result in significant cost and power consumption. To this end, metasurface-based transceivers, consisting of microstrips of metamaterials, have recently emerged as an efficient enabler of extreme mMIMO systems. In this paper, we consider metasurface-based receivers with a $1$-bit Analog-to-Digital Converter (ADC) per microstrip and develop an analytical framework for the optimization of the analog and digital combining matrices. Our numerical results, including comparisons with fully digital, infinite-resolution MIMO, provide useful insights into the role of various system parameters.
△ Less
Submitted 15 January, 2024;
originally announced January 2024.
-
Enhanced data Detection for Massive MIMO with 1-Bit ADCs
Authors:
Amin Radbord,
Italo Atzeni,
Antti Tolli
Abstract:
We present new insightful results on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The expected values of the soft-estimated symbols (i.e., after the linear combining and prior to the data detection) have been recently characterized for multiple user equipments (UEs) and maximum ratio combining (MRC) receiver at the base stati…
▽ More
We present new insightful results on the uplink data detection for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The expected values of the soft-estimated symbols (i.e., after the linear combining and prior to the data detection) have been recently characterized for multiple user equipments (UEs) and maximum ratio combining (MRC) receiver at the base station. In this paper, we first provide a numerical evaluation of the expected value of the soft-estimated symbols with zero-forcing (ZF) and minimum mean squared error (MMSE) receivers for a multi-UE setting with correlated Rayleigh fading. Then, we propose a joint data detection (JD) strategy, which exploits the interdependence among the soft-estimated symbols of the interfering UEs, along with its low-complexity variant. These strategies are compared with a naive approach that adapts the maximum-likelihood data detection to the 1-bit quantization. Numerical results show that ZF and MMSE provide considerable gains over MRC in terms of symbol error rate. Moreover, the proposed JD and its low-complexity variant provide a significant boost in comparison with the single-UE data detection.
△ Less
Submitted 7 December, 2023;
originally announced December 2023.
-
Doubly 1-Bit Quantized Massive MIMO
Authors:
Italo Atzeni,
Antti Tölli,
Duy H. N. Nguyen,
A. Lee Swindlehurst
Abstract:
Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In…
▽ More
Enabling communications in the (sub-)THz band will call for massive multiple-input multiple-output (MIMO) arrays at either the transmit- or receive-side, or at both. To scale down the complexity and power consumption when operating across massive frequency and antenna dimensions, a sacrifice in the resolution of the digital-to-analog/analog-to-digital converters (DACs/ADCs) will be inevitable. In this paper, we analyze the extreme scenario where both the transmit- and receive-side are equipped with fully digital massive MIMO arrays and 1-bit DACs/ADCs, which leads to a system with minimum radio-frequency complexity, cost, and power consumption. Building upon the Bussgang decomposition, we derive a tractable approximation of the mean squared error (MSE) between the transmitted data symbols and their soft estimates. Numerical results show that, despite its simplicity, a doubly 1-bit quantized massive MIMO system with very large antenna arrays can deliver an impressive performance in terms of MSE and symbol error rate.
△ Less
Submitted 4 December, 2023;
originally announced December 2023.
-
Pilot-Based Uplink Power Control in Single-UE Massive MIMO Systems With 1-Bit ADCs
Authors:
Amila Ravinath,
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonici…
▽ More
We propose uplink power control (PC) methods for massive multiple-input multiple-output systems with 1-bit analog-to-digital converters, which are specifically tailored to address the non-monotonic data detection performance with respect to the transmit power of the user equipment (UE). Considering a single UE, we design a multi-amplitude pilot sequence to capture the aforementioned non-monotonicity, which is utilized at the base station to derive UE transmit power adjustments via single-shot or differential power control (DPC) techniques. Both methods enable closed-loop uplink PC using different feedback approaches. The single-shot method employs one-time multi-bit feedback, while the DPC method relies on continuous adjustments with 1-bit feedback. Numerical results demonstrate the superiority of the proposed schemes over conventional closed-loop uplink PC techniques.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Uplink Power Control for Distributed Massive MIMO with 1-Bit ADCs
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the U…
▽ More
We consider the problem of uplink power control for distributed massive multiple-input multiple-output systems where the base stations (BSs) are equipped with 1-bit analog-to-digital converters (ADCs). The scenario with a single-user equipment (UE) is first considered to provide insights into the signal-tonoise-and-distortion ratio (SNDR). With a single BS, the SNDR is a unimodal function of the UE transmit power. With multiple BSs, the SNDR at the output of the joint combiner can be made unimodal by adding properly tuned dithering at each BS. As a result, the UE can be effectively served by multiple BSs with 1-bit ADCs. Considering the signal-to-interference-plus-noise-anddistortion ratio (SINDR) in the multi-UE scenario, we aim at optimizing the UE transmit powers and the dithering at each BS based on the min-power and max-min-SINDR criteria. To this end, we propose three algorithms with different convergence and complexity properties. Numerical results show that, if the desired SINDR can only be achieved via joint combining across multiple BSs with properly tuned dithering, the optimal UE transmit power is imposed by the distance to the farthest serving BS (unlike in the unquantized case). In this context, dithering plays a crucial role in enhancing the SINDR, especially for UEs with significant path loss disparity among the serving BSs.
△ Less
Submitted 18 September, 2023;
originally announced September 2023.
-
Analysis of Oversampling in Uplink Massive MIMO-OFDM with Low-Resolution ADCs
Authors:
Mengyuan Ma,
Nhan Thanh Nguyen,
Italo Atzeni,
Markku Juntti
Abstract:
Low-resolution analog-to-digital converters (ADCs) have emerged as an efficient solution for massive multiple-input multiple-output (MIMO) systems to reap high data rates with reasonable power consumption and hardware complexity. In this paper, we analyze the performance of oversampling in uplink massive MIMO orthogonal frequency-division multiplexing (MIMO-OFDM) systems with low-resolution ADCs.…
▽ More
Low-resolution analog-to-digital converters (ADCs) have emerged as an efficient solution for massive multiple-input multiple-output (MIMO) systems to reap high data rates with reasonable power consumption and hardware complexity. In this paper, we analyze the performance of oversampling in uplink massive MIMO orthogonal frequency-division multiplexing (MIMO-OFDM) systems with low-resolution ADCs. Considering both the temporal and spatial correlation of the quantization distortion, we derive an approximate closed-form expression of an achievable sum rate, which reveals how the oversampling ratio (OSR), the ADC resolution, and the signal-to-noise ratio (SNR) jointly affect the system performance. In particular, we demonstrate that oversampling can effectively improve the sum rate by mitigating the impact of the quantization distortion, especially at high SNR and with very low ADC resolution. Furthermore, we show that the considered low-resolution massive MIMO-OFDM system can achieve the same performance as the unquantized one when both the SNR and the OSR are sufficiently high. Numerical simulations confirm our analysis.
△ Less
Submitted 30 June, 2023;
originally announced June 2023.
-
Multi-User Data Detection in Massive MIMO with 1-Bit ADCs
Authors:
Amin Radbord,
Italo Atzeni,
Antti Tölli
Abstract:
We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this pap…
▽ More
We provide new analytical results on the uplink data detection in massive multiple-input multiple-output systems with 1-bit analog-to-digital converters. The statistical properties of the soft-estimated symbols (i.e., after linear combining and prior to the data detection process) have been previously characterized only for a single user equipment (UE) and uncorrelated Rayleigh fading. In this paper, we consider a multi-UE setting with correlated Rayleigh fading, where the soft-estimated symbols are obtained by means of maximum ratio combining based on imperfectly estimated channels. We derive a closed-form expression of the expected value of the soft-estimated symbols, which allows to understand the impact of the specific data symbols transmitted by the interfering UEs. Building on this result, we design efficient data detection strategies based on the minimum distance criterion, which are compared in terms of symbol error rate and complexity.
△ Less
Submitted 31 March, 2023;
originally announced March 2023.
-
Pilot-Aided Distributed Multi-Group Multicast Precoding Design for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the join…
▽ More
We propose fully distributed multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems with modest training overhead. We target the minimization of the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with a weighted sum MSE minimization to simplify the computation and signaling. To design the joint network-wide multi-group multicast precoders at the base stations (BSs) and the combiners at the user equipments (UEs) in a fully distributed fashion, we adopt an iterative bi-directional training scheme with UE-specific or group-specific precoded uplink pilots and group-specific precoded downlink pilots. To this end, we introduce a new group-specific uplink training resource that entirely eliminates the need for backhaul signaling for the channel state information (CSI) exchange. The precoders are optimized locally at each BS by means of either best-response or gradient-based updates, and the convergence of the two approaches is analyzed with respect to the centralized implementation with perfect CSI. Finally, numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI.
△ Less
Submitted 31 January, 2024; v1 submitted 14 November, 2022;
originally announced November 2022.
-
Distributed Precoding Design for Multi-Group Multicasting in Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-direct…
▽ More
We consider multi-group multicast precoding designs for cell-free massive multiple-input multiple-output (MIMO) systems. To optimize the transmit and receive beamforming strategies, we focus on minimizing the sum of the maximum mean squared errors (MSEs) over the multicast groups, which is then approximated with the sum MSE to simplify the computation and signaling. We adopt an iterative bi-directional training scheme with uplink and downlink precoded pilots to cooperatively design the multi-group multicast precoders at each base station and the combiners at each user equipment in a distributed fashion. An additional group-specific uplink training resource is introduced, which entirely eliminates the need for backhaul signaling for channel state information (CSI) exchange. We also propose a simpler distributed precoding design based solely on group-specific pilots, which can be useful in the case of scarce training resources. Numerical results show that the proposed distributed methods greatly outperform conventional cell-free massive MIMO precoding designs that rely solely on local CSI.
△ Less
Submitted 10 November, 2022;
originally announced November 2022.
-
A Variational Bayesian Perspective on Massive MIMO Detection
Authors:
Duy H. N. Nguyen,
Italo Atzeni,
Antti Tölli,
A. Lee Swindlehurst
Abstract:
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for mas…
▽ More
Optimal data detection in massive multiple-input multiple-output (MIMO) systems requires prohibitive computational complexity. A variety of detection algorithms have been proposed in the literature, offering different trade-offs between complexity and detection performance. In this paper, we build upon variational Bayes (VB) inference to design low-complexity multiuser detection algorithms for massive MIMO systems. We first examine the massive MIMO detection problem with perfect channel state information at the receiver (CSIR) and show that a conventional VB method with known noise variance yields poor detection performance. To address this limitation, we devise two new VB algorithms that use the noise variance and covariance matrix postulated by the algorithms themselves. We further develop the VB framework for massive MIMO detection with imperfect CSIR. Simulation results show that the proposed VB methods achieve significantly lower detection errors compared with existing schemes for a wide range of channel models.
△ Less
Submitted 23 May, 2022;
originally announced May 2022.
-
Low-Resolution Massive MIMO Under Hardware Power Consumption Constraints
Authors:
Italo Atzeni,
Antti Tölli,
Giuseppe Durisi
Abstract:
We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between the…
▽ More
We consider a fully digital massive multiple-input multiple-output architecture with low-resolution analog-to-digital/digital-to-analog converters (ADCs/DACs) at the base station (BS) and analyze the performance trade-off between the number of BS antennas, the resolution of the ADCs/DACs, and the bandwidth. Assuming a hardware power consumption constraint, we determine the relationship between these design parameters by using a realistic model for the power consumption of the ADCs/DACs and the radio frequency chains. Considering uplink pilot-aided channel estimation, we build on the Bussgang decomposition to derive tractable expressions for uplink and downlink ergodic achievable sum rates. Numerical results show that the ergodic performance is boosted when many BS antennas with very low resolution (i.e., 2 to 3 bits) are adopted in both the uplink and the downlink.
△ Less
Submitted 3 December, 2021;
originally announced December 2021.
-
Joint Minimum DL-UL Rate Maximization for Cell-Free Massive MIMO
Authors:
Bikshapathi Gouda,
Italo Atzeni,
Antti Tölli
Abstract:
In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short sch…
▽ More
In cell-free massive multiple-input multiple-output (MIMO) systems, the beamforming strategies at the base stations (BSs) and user equipments (UEs) can be computed building on bi-directional training. However, the precoding/decoding optimization in the downlink (DL) and in the uplink (UL) generally requires two separate bi-directional training phases, which can be wasteful in the case of short scheduling blocks. This paper proposes a framework to reduce the bi-directional training overhead by considering a common beamforming training strategy for both DL and UL when the UEs to be served in the two directions are the same. In doing so, we consider the problem of maximizing the (weighted) minimum DL-UL rate among all the UEs. Numerical results show that, in scenarios with short scheduling blocks, the proposed framework outperforms the case where the DL and UL beamforming strategies are computed individually via two separate bi-directional training phases thanks to the reduced training overhead. Even more substantial gains are observed with respect to the case with a single bi-directional training phase, where the DL (resp. UL) beamforming strategies are reused in the UL (resp. DL).
△ Less
Submitted 12 October, 2021;
originally announced October 2021.
-
Uplink Data Detection Analysis of 1-Bit Quantized Massive MIMO
Authors:
Italo Atzeni,
Antti Tölli
Abstract:
This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic be…
▽ More
This paper presents an analytical framework for the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs). Considering the single-user case, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted at the base station (BS) along with their asymptotic behavior at high signal-to-noise ratio (SNR). These results are exploited to enhance the performance of maximum likelihood detection by taking into account the dispersion of the estimated symbols about their expected values. The symbol error rate with 1-bit ADCs is evaluated with respect to the number of BS antennas, the SNR, and the pilot length used for the channel estimation. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right SNR considerably improves the data detection accuracy.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
Channel Estimation and Data Detection Analysis of Massive MIMO with 1-Bit ADCs
Authors:
Italo Atzeni,
Antti Tölli
Abstract:
We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scal…
▽ More
We present an analytical framework for the channel estimation and the data detection in massive multiple-input multiple-output uplink systems with 1-bit analog-to-digital converters (ADCs) and i.i.d. Rayleigh fading. First, we provide closed-form expressions of the mean squared error (MSE) of the channel estimation considering the state-of-the-art linear minimum MSE estimator and the class of scaled least-squares estimators. For the data detection, we provide closed-form expressions of the expected value and the variance of the estimated symbols when maximum ratio combining is adopted, which can be exploited to efficiently implement minimum distance detection and, potentially, to design the set of transmit symbols. Our analytical findings explicitly depend on key system parameters such as the signal-to-noise ratio (SNR), the number of user equipments, and the pilot length, thus enabling a precise characterization of the performance of the channel estimation and the data detection with 1-bit ADCs. The proposed analysis highlights a fundamental SNR trade-off, according to which operating at the right noise level significantly enhances the system performance.
△ Less
Submitted 16 November, 2021; v1 submitted 19 February, 2021;
originally announced February 2021.
-
Scoring the Terabit/s Goal:Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Simon Bicais,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Carmen D'Andrea,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Behrooz Makki,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Shahriar Shahabuddin,
Tommy Svensson
, et al. (4 additional authors not shown)
Abstract:
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we conside…
▽ More
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity.
△ Less
Submitted 21 February, 2021; v1 submitted 17 August, 2020;
originally announced August 2020.
-
White Paper on Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Tommy Svensson,
Oskari Tervo,
Antti Tolli,
Qingqing Wu,
Wen Xu
Abstract:
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks wil…
▽ More
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Distributed Precoding Design via Over-the-Air Signaling for Cell-Free Massive MIMO
Authors:
Italo Atzeni,
Bikshapathi Gouda,
Antti Tölli
Abstract:
Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative preco…
▽ More
Most works on cell-free massive multiple-input multiple-output (MIMO) consider non-cooperative precoding strategies at the base stations (BSs) to avoid extensive channel state information (CSI) exchange via backhaul signaling. However, considerable performance gains can be accomplished by allowing coordination among the BSs. This paper proposes the first distributed framework for cooperative precoding design in cell-free massive MIMO (and, more generally, in joint transmission coordinated multi-point) systems that entirely eliminates the need for backhaul signaling for CSI exchange. A novel over-the-air (OTA) signaling mechanism is introduced such that each BS can obtain the same cross-term information that is traditionally exchanged among the BSs via backhaul signaling. The proposed distributed precoding design enjoys desirable flexibility and scalability properties, as the amount of OTA signaling does not scale with the number of BSs or user equipments. Numerical results show fast convergence and remarkable performance gains as compared with non-cooperative precoding design. The proposed scheme can also outperform the centralized precoding design under realistic CSI acquisition.
△ Less
Submitted 13 October, 2020; v1 submitted 1 April, 2020;
originally announced April 2020.
-
D2D-Aided Multi-Antenna Multicasting
Authors:
Placido Mursia,
Italo Atzeni,
David Gesbert,
Mari Kobayashi
Abstract:
Multicast services, whereby a common valuable message needs to reach a whole population of user equipments (UEs), are gaining attention on account of new applications such as vehicular networks. As it proves challenging to guarantee decodability by every UE in a large population, service reliability is indeed the Achilles' heel of multicast transmissions. To circumvent this problem, a two-phase pr…
▽ More
Multicast services, whereby a common valuable message needs to reach a whole population of user equipments (UEs), are gaining attention on account of new applications such as vehicular networks. As it proves challenging to guarantee decodability by every UE in a large population, service reliability is indeed the Achilles' heel of multicast transmissions. To circumvent this problem, a two-phase protocol capitalizing on device-to-device (D2D) links between UEs has been proposed, which overcomes the vanishing behavior of the multicast rate. In this paper, we revisit such D2D-aided protocol in the new light of precoding capabilities at the base station (BS). We obtain an enhanced scheme that aims at selecting a subset of UEs who cooperate to spread the common message across the rest of the network via D2D retransmissions. With the objective of maximizing the multicast rate under some outage constraint, we propose an algorithm with provable convergence that jointly identifies the most pertinent relaying UEs and optimizes the precoding strategy at the BS.
△ Less
Submitted 3 April, 2019;
originally announced April 2019.
