-
Characterization of Lightweight GPS Disciplined Oscillators for Distributed UAV Measurement Applications
Authors:
Julia Beuster,
Carsten Andrich,
Sebastian Giehl
Abstract:
With an increasing variety of measurement applications using sensing nodes on unmanned aerial vehicles (UAVs), global positioning system (GPS) and global navigation satellite system (GNSS) disciplined oscillators (GPSDOs, GNSSDOs) are an appealing solution for precise wireless inter-device synchronization. Typically evaluated under laboratory conditions by analyzing the 10 MHz and 1 pulse per seco…
▽ More
With an increasing variety of measurement applications using sensing nodes on unmanned aerial vehicles (UAVs), global positioning system (GPS) and global navigation satellite system (GNSS) disciplined oscillators (GPSDOs, GNSSDOs) are an appealing solution for precise wireless inter-device synchronization. Typically evaluated under laboratory conditions by analyzing the 10 MHz and 1 pulse per second (PPS) reference signal stability, these test methods overlook airborne oscillator performance. This paper characterizes lightweight GNSSDO models for flight suitability using a measurement system based on software defined radios (SDRs). We analyze reference signal stability under controlled GNSS signal impairments to predict performance and measurement precision loss in dynamic operational modes. Additionally, we assess behavior under the impacts caused by operating the UAV, as well as typical flight vibrations and accelerations outlined in the standard for payload devices.
△ Less
Submitted 23 June, 2024;
originally announced June 2024.
-
Sounding-Based Evaluation of Multi-Sensor ISAC Networks for Drone Applications: Measurement and Simulation Perspectives
Authors:
Julia Beuster,
Carsten Jan Smeenk,
Saw James Myint,
Reza Faramarzahanagri,
Carsten Andrich,
Sebastian Giehl,
Christian Schneider,
Reiner S. Thomä
Abstract:
With the upcoming multitude of commercial and public applications envisioned in the mobile 6G radio landscape using unmanned aerial vehicles (UAVs), integrated sensing and communication (ISAC) plays a key role to enable the detection and localization of passive objects with radar sensing, while optimizing the utilization of scarce resources. To explore the potential of future ISAC architectures wi…
▽ More
With the upcoming multitude of commercial and public applications envisioned in the mobile 6G radio landscape using unmanned aerial vehicles (UAVs), integrated sensing and communication (ISAC) plays a key role to enable the detection and localization of passive objects with radar sensing, while optimizing the utilization of scarce resources. To explore the potential of future ISAC architectures with UAVs as mobile nodes in distributed multi-sensor networks, the system's fundamental capability to detect static and dynamic objects that reveal themselves by their bi-static back-scattering needs to be evaluated. Therefore, this paper addresses simulation- and measurement based data acquisition methods to gather knowledge about the bistatic reflectivity of single objects including their Micro-Doppler signature for object identification as well as the influence of multipath propagation in different environments on the localization accuracy and radar tracking performance. We show exemplary results from simulation models, bi-static reflectivity measurements in laboratory environment and real-flight channel sounding experiments in selected scenarios showcasing the potential of synthetic and measured data sets for development and evaluation of ISAC algorithms. The presented measurement data sets are publicly available to encourage the academic RF community to validate future algorithms using realistic scenarios alongside simulations models.
△ Less
Submitted 26 February, 2024;
originally announced February 2024.
-
Accelerating Innovation in 6G Research: Real-Time Capable SDR System Architecture for Rapid Prototy**
Authors:
Maximilian Engelhardt,
Sebastian Giehl,
Michael Schubert,
Alexander Ihlow,
Christian Schneider,
Alexander Ebert,
Markus Landmann,
Giovanni Del Galdo,
Carsten Andrich
Abstract:
The upcoming 3GPP global mobile communication standard 6G strives to push the technological limits of radio frequency (RF) communication even further than its predecessors: Sum data rates beyond 100 Gbit/s, RF bandwidths above 1 GHz per link, and sub-millisecond latency necessitate very high performance development tools. We propose a new SDR firmware and software architecture designed explicitly…
▽ More
The upcoming 3GPP global mobile communication standard 6G strives to push the technological limits of radio frequency (RF) communication even further than its predecessors: Sum data rates beyond 100 Gbit/s, RF bandwidths above 1 GHz per link, and sub-millisecond latency necessitate very high performance development tools. We propose a new SDR firmware and software architecture designed explicitly to meet these challenging requirements. It relies on Ethernet and commercial off-the-shelf network and server components to maximize flexibility and to reduce costs. We analyze state-of-the-art solutions (USRP X440 and other RFSoC-based systems), derive architectural design goals, explain resulting design decision in detail, and exemplify our architecture's implementation on the XCZU48DR RFSoC. Finally, we validate its performance via measurements and outline how the architecture surpasses the state-of-the-art with respect to sustained RF recording, while maintaining high Ethernet bandwidth efficiency. Building a micro-Doppler radar example, we demonstrate its real-time and rapid application development capabilities.
△ Less
Submitted 23 May, 2024; v1 submitted 9 February, 2024;
originally announced February 2024.
-
Bistatic Reflectivity and Micro-Doppler Signatures of Drones for Integrated Communication and Sensing
Authors:
Heraldo Cesar Alves Costa,
Saw James Myint,
Carsten Andrich,
Sebastian W. Giehl,
Christian Schneider,
Reiner S. Thomä
Abstract:
The integration of wireless communication and radar sensing is gaining the interest of researchers from wireless communication and radar societies. Sensing in Integrated Communication and Sensing (ICAS) systems differs from the traditional radar system in the configuration of transmitter-target-receiver, the operating frequency bands, and the transmitting waveform. It is necessary to understand ho…
▽ More
The integration of wireless communication and radar sensing is gaining the interest of researchers from wireless communication and radar societies. Sensing in Integrated Communication and Sensing (ICAS) systems differs from the traditional radar system in the configuration of transmitter-target-receiver, the operating frequency bands, and the transmitting waveform. It is necessary to understand how target electromagnetic signatures behave in this context. Therefore, this paper presents measurements and analysis of two important target signatures, reflectivity and micro-Doppler, for sensing in ICAS. These target signatures are measured in the state-of-the-art measurement system, Bistatische-Radar-Messeinrichtung (BiRa).
△ Less
Submitted 8 March, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Modelling Micro-Doppler Signature of Drone Propellers in Distributed ISAC
Authors:
Heraldo Cesar Alves Costa,
Saw James Myint,
Carsten Andrich,
Sebastian W. Giehl,
Christian Schneider,
Reiner S. Thomä
Abstract:
Integrated Sensing and Communication (ISAC) comprises detection and analysis of non-cooperative targets by exploiting the resources of the mobile radio system. In this context, micro-Doppler is of great importance for target classification, in order to distinguish objects with local movements. For develo** algorithms for target classification, it is necessary to have a large amount of target sig…
▽ More
Integrated Sensing and Communication (ISAC) comprises detection and analysis of non-cooperative targets by exploiting the resources of the mobile radio system. In this context, micro-Doppler is of great importance for target classification, in order to distinguish objects with local movements. For develo** algorithms for target classification, it is necessary to have a large amount of target signatures. Aiming to generate these data, this paper proposes a mathematical model for the micro-Doppler of drone rotating propellers, and validate the proposed model by comparing it to measured micro-Doppler. Results show that the proposed mathematical model can generate micro-Doppler data very similar to those from measurement data.
△ Less
Submitted 13 February, 2024; v1 submitted 25 January, 2024;
originally announced January 2024.
-
Characterization of Multi-Link Propagation and Bistatic Target Reflectivity for Distributed Multi-Sensor ISAC
Authors:
Reiner S. Thomä,
Carsten Andrich,
Julia Beuster,
Heraldo Cesar Alves Costa,
Sebastian Giehl,
Saw James Myint,
Christian Schneider,
Gerd Sommerkorn
Abstract:
Integrated sensing and communication (ISAC) qualifies mobile radio systems for detecting and localizing of passive objects by means of radar sensing. Advanced ISAC networks rely on meshed mobile radio access nodes (infrastructure and/or user equipment, resp.) establishing a distributed, multistatic MIMO radar system in which each target reveals itself by its bistatic backscattering. Therefore, cha…
▽ More
Integrated sensing and communication (ISAC) qualifies mobile radio systems for detecting and localizing of passive objects by means of radar sensing. Advanced ISAC networks rely on meshed mobile radio access nodes (infrastructure and/or user equipment, resp.) establishing a distributed, multistatic MIMO radar system in which each target reveals itself by its bistatic backscattering. Therefore, characterization of the bistatic reflectivity of targets along their trajectories of movement is of highest importance for ISAC performance prediction. We summarize several challenges in bistatic modeling and measurement of extended, potentially time-variant radar targets. We emphasize the specific challenges arising for distributed (hence multi-link) ISAC networks and compare to the state of the art in propagation modeling for mobile communication.
△ Less
Submitted 15 May, 2023; v1 submitted 21 October, 2022;
originally announced October 2022.
-
Receiver Bandwidth Extension Beyond Nyquist Using Channel Bonding
Authors:
Sebastian Giehl,
Carsten Andrich,
Michael Schubert,
Maximilian Engelhardt,
Alexander Ihlow
Abstract:
Current and upcoming communication and sensing technologies require ever larger bandwidths. Channel bonding can be utilized to extend a receiver's instantaneous bandwidth beyond a single converter's Nyquist limit. Two potential joint front-end and converter design approaches are theoretically introduced, realized and evaluated in this paper. The Xilinx RFSoC platform with its 5 GSa/s analog to dig…
▽ More
Current and upcoming communication and sensing technologies require ever larger bandwidths. Channel bonding can be utilized to extend a receiver's instantaneous bandwidth beyond a single converter's Nyquist limit. Two potential joint front-end and converter design approaches are theoretically introduced, realized and evaluated in this paper. The Xilinx RFSoC platform with its 5 GSa/s analog to digital converters (ADCs) is used to implement both a hybrid coupler based in-phase/quadrature (I/Q) sampling and a time-interleaved sampling approach along with channel bonding. Both realizations are demonstrated to be able to reconstruct instantaneous bandwidths of 5 GHz with up to 49 dB image rejection ratio (IRR) typically within 4 to 8 dB the front-ends' theoretical limits.
△ Less
Submitted 12 February, 2024; v1 submitted 14 October, 2022;
originally announced October 2022.
-
Measurement Testbed for Radar and Emitter Localization of UAV at 3.75 GHz
Authors:
Julia Beuster,
Carsten Andrich,
Michael Döbereiner,
Steffen Schieler,
Maximilian Engelhardt,
Christian Schneider,
Reiner Thomä
Abstract:
This paper presents an experimental measurement platform for the research and development of unmanned aerial vehicles (UAVs) localization algorithms using radio emission and reflectivity. We propose a cost-effective, flexible testbed made from commercial off-the-shelf (COTS) devices to allow academic research regarding the upcoming integration of UAV surveillance in existing mobile radio networks…
▽ More
This paper presents an experimental measurement platform for the research and development of unmanned aerial vehicles (UAVs) localization algorithms using radio emission and reflectivity. We propose a cost-effective, flexible testbed made from commercial off-the-shelf (COTS) devices to allow academic research regarding the upcoming integration of UAV surveillance in existing mobile radio networks in terms of integrated sensing and communication (ISAC). The system enables nanosecond-level synchronization accuracy and centimeter-level positioning accuracy for multiple distributed sensor nodes and a mobile UAV-mounted node. Results from a real-world measurement in a 16 km2 urban area demonstrate the system's performance with both emitter localization as well as with the radar setup.
△ Less
Submitted 26 January, 2023; v1 submitted 13 October, 2022;
originally announced October 2022.
-
Low-Latency Analog-to-Analog Signal Processing using PC Hardware and USRPs
Authors:
Maximilian Engelhardt,
Carsten Andrich,
Alexander Ihlow,
Sebastian Giehl,
Giovanni Del Galdo
Abstract:
In this paper, we implement a low-latency rapid-prototy** platform for signal processing based on software-defined radios (SDRs) and off-the-shelf PC hardware. This platform allows to evaluate a wide variety of algorithms in real-time environments, supporting new developments in the fields of classical, AI-based, and hybrid signal processing. To accomplish this, the streaming protocol of the use…
▽ More
In this paper, we implement a low-latency rapid-prototy** platform for signal processing based on software-defined radios (SDRs) and off-the-shelf PC hardware. This platform allows to evaluate a wide variety of algorithms in real-time environments, supporting new developments in the fields of classical, AI-based, and hybrid signal processing. To accomplish this, the streaming protocol of the used USRP X310 devices is implemented using the Data Plane Development Kit (DPDK), which allows to handle network communication in userspace only. This bypasses the kernel and thus avoids the latencies caused by interrupt handling, scheduling, and context switches. It allows signal processing to be performed on isolated processor cores that are protected from interrupts to a great extent. To validate our approach, linear time-invariant channel emulation has been implemented. For this, an analog-to-analog latency of 31 microseconds was achieved, demonstrating that our PC-based approach enables the implementation of rapid-prototy** systems with low latency.
△ Less
Submitted 12 October, 2022;
originally announced October 2022.
-
High-Precision Measurement of Sine and Pulse Reference Signals using Software-Defined Radio
Authors:
Carsten Andrich,
Alexander Ihlow,
Julia Bauer,
Niklas Beuster,
Giovanni Del Galdo
Abstract:
This paper addresses simultaneous, high-precision measurement and analysis of generic reference signals by using inexpensive commercial off-the-shelf Software Defined Radio hardware. Sine reference signals are digitally down-converted to baseband for the analysis of phase deviations. Hereby, we compare the precision of the fixed-point hardware Digital Signal Processing chain with a custom Single I…
▽ More
This paper addresses simultaneous, high-precision measurement and analysis of generic reference signals by using inexpensive commercial off-the-shelf Software Defined Radio hardware. Sine reference signals are digitally down-converted to baseband for the analysis of phase deviations. Hereby, we compare the precision of the fixed-point hardware Digital Signal Processing chain with a custom Single Instruction Multiple Data (SIMD) x86 floating-point implementation. Pulse reference signals are analyzed by a software trigger that precisely locates the time where the slope passes a certain threshold. The measurement system is implemented and verified using the Universal Software Radio Peripheral (USRP) N210 by Ettus Research LLC. Applying standard 10 MHz and 1 PPS reference signals for testing, a measurement precision (standard deviation) of 0.36 ps and 16.6 ps is obtained, respectively. In connection with standard PC hardware, the system allows long-term acquisition and storage of measurement data over several weeks. A comparison is given to the Dual Mixer Time Difference (DMTD) and Time Interval Counter (TIC), which are state-of-the-art measurement methods for sine and pulse signal analysis, respectively. Furthermore, we show that our proposed USRP-based approach outperforms measurements with a high-grade Digital Sampling Oscilloscope.
△ Less
Submitted 10 April, 2018; v1 submitted 4 March, 2018;
originally announced March 2018.
-
Cooperative Passive Coherent Location: A Promising 5G Service to Support Road Safety
Authors:
Reiner S. Thomä,
Carsten Andrich,
Giovanni Del Galdo,
Michael Döbereiner,
Matthias A. Hein,
Martin Käske,
Günter Schäfer,
Steffen Schieler,
Christian Schneider,
Andreas Schwind,
Philip Wendland
Abstract:
5G promises many new vertical service areas beyond simple communication and data transfer. We propose CPCL (cooperative passive coherent location), a distributed MIMO radar service, which can be offered by mobile radio network operators as a service for public user groups. CPCL comes as an inherent part of the radio network and takes advantage of the most important key features proposed for 5G. It…
▽ More
5G promises many new vertical service areas beyond simple communication and data transfer. We propose CPCL (cooperative passive coherent location), a distributed MIMO radar service, which can be offered by mobile radio network operators as a service for public user groups. CPCL comes as an inherent part of the radio network and takes advantage of the most important key features proposed for 5G. It extends the well-known idea of passive radar (also known as passive coherent location, PCL) by introducing cooperative principles. These range from cooperative, synchronous radio signaling, and MAC up to radar data fusion on sensor and scenario levels. By using software-defined radio and network paradigms, as well as real-time mobile edge computing facilities intended for 5G, CPCL promises to become a ubiquitous radar service which may be adaptive, reconfigurable, and perhaps cognitive. As CPCL makes double use of radio resources (both in terms of frequency bands and hardware), it can be considered a green technology. Although we introduce the CPCL idea from the viewpoint of vehicle-to-vehicle/infrastructure (V2X) communication, it can definitely also be applied to many other applications in industry, transport, logistics, and for safety and security applications.
△ Less
Submitted 1 October, 2019; v1 submitted 12 February, 2018;
originally announced February 2018.