-
Enhancing Scalability of Optimal Kron-based Reduction of Networks (Opti-KRON) via Decomposition with Community Detection
Authors:
Omid Mokhtari,
Samuel Chevalier,
Mads Almassalkhi
Abstract:
Electrical networks contain thousands of interconnected nodes and edges, which leads to computational challenges in some power system studies. To address these challenges, we contend that network reductions can serve as a framework to enable scalable computing in power systems. By building upon a prior AC "Opti-KRON" formulation, this paper presents a DC power flow formulation for finding network…
▽ More
Electrical networks contain thousands of interconnected nodes and edges, which leads to computational challenges in some power system studies. To address these challenges, we contend that network reductions can serve as a framework to enable scalable computing in power systems. By building upon a prior AC "Opti-KRON" formulation, this paper presents a DC power flow formulation for finding network reductions that are optimal within the context of large transmission analysis. Opti-KRON previously formulated optimal Kron-based network reductions as a mixed integer linear program (MILP), where the number of binary variables scaled with the number of nodes. To improve the scalability of the Opti-KRON approach, we augment the MILP formulation with a community detection (CD) technique that segments a large network into smaller, disjoint, but contiguous sub-graphs (i.e., communities). For each sub-graph, we then (in parallel) apply MILP-based along with a new cutting plane constraint, thus, enhancing scalability. Ultimately, the new DC-based Opti-KRON method can achieve a 80-95\% reduction of networks (in terms of nodes) while statistically outperforming other CD- and Kron-based methods. We present simulation results for the IEEE RTS-96 and the 2383-bus Polish networks.
△ Less
Submitted 2 July, 2024;
originally announced July 2024.
-
Capacity Credit Evaluation of Generalized Energy Storage Considering Endogenous Uncertainty
Authors:
Ning Qi,
Pierre Pinson,
Mads R. Almassalkhi,
Yingrui Zhuang,
Yifan Su,
Feng Liu
Abstract:
Generalized energy storage (GES), encompassing both physical and virtual energy storage, can provide remarkable but uncertain adequacy flexibility. When assessing GES's contribution to resource adequacy, the literature typically considers exogenous uncertainties (e.g., failures and stochastic response) but overlooks endogenous uncertainties, such as self-scheduling in liberal markets and decision-…
▽ More
Generalized energy storage (GES), encompassing both physical and virtual energy storage, can provide remarkable but uncertain adequacy flexibility. When assessing GES's contribution to resource adequacy, the literature typically considers exogenous uncertainties (e.g., failures and stochastic response) but overlooks endogenous uncertainties, such as self-scheduling in liberal markets and decision-dependent uncertainty (DDU). In this regard, this paper proposes a novel capacity credit evaluation framework to accurately quantify GES's contribution to resource adequacy, where a sequential coordinated dispatch method is proposed to capture realistic GES operations by coordinating self-scheduling in the day-ahead energy market and real-time adequacy-oriented dispatch in the capacity market. To incorporate DDU of GES (i.e., responsiveness affected by dispatch decisions and prices in capacity market), we present a chance-constrained optimization approach and tractable solution methodologies for real-time dispatch. We propose a practical adequacy assessment method to quantify the impact of DDU on capacity credit by evaluating the consequence of ignoring DDU. Additionally, a novel capacity credit index called equivalent storage capacity substitution is introduced to quantify the equivalent deterministic storage capacity of the uncertain virtual energy storage. Simulations show that the proposed method yields reliable and accurate capacity credit values by accounting for self-scheduling of GES and managing the risk from DDU. Finally, key impact factors of GES's capacity credit are thoroughly discussed, offering valuable insights for the decision-making of capacity market operators.
△ Less
Submitted 11 June, 2024;
originally announced June 2024.
-
Reach and hold flexibility characterization and trade-off analysis for aggregations of thermostatically controlled loads
Authors:
Mazen Elsaadany,
Mads R. Almassalkhi
Abstract:
Thermostatically controlled loads (TCLs) have the potential to be flexible and responsive loads to be used in demand response (DR) schemes. With increasing renewable penetration, DR is playing an increasingly important role in enhancing power grid reliability. The aggregate demand of a population of TCLs can be modulated by changing their temperature setpoint. When and/or what proportion of the po…
▽ More
Thermostatically controlled loads (TCLs) have the potential to be flexible and responsive loads to be used in demand response (DR) schemes. With increasing renewable penetration, DR is playing an increasingly important role in enhancing power grid reliability. The aggregate demand of a population of TCLs can be modulated by changing their temperature setpoint. When and/or what proportion of the population sees the setpoint change determines the change in aggregate demand. However, since the TCL population is finite, not all changes in aggregate demand can be maintained for arbitrarily long periods of time. In this paper, the dynamic behavior of a TCL fleet is modeled and used to characterize the set possible changes in aggregate demand that can be reached and the corresponding time for which the demand change can be held, for a given change in setpoint. This set is referred to, in this paper, as the reach and hold set of a TCL fleet. Furthermore, the effect of the setpoint change and ambient temperature on the reach and hold are analyzed. The characterized set is then validated through simulation using both the population TCL models and individual TCL micro-models.
△ Less
Submitted 20 May, 2024;
originally announced May 2024.
-
Optimization-based Framework for Selecting Under-frequency Load Shedding Parameters
Authors:
Waheed Owonikoko,
Mazen Elsaadany,
Amritanshu Pandey,
Mads R. Almassalkhi
Abstract:
High penetration of renewable resources results in a power system with lower inertia and higher frequency sensitivity to power imbalances. Such systems are becoming increasingly susceptible to frequency collapse during extreme disturbances. Under-Frequency Load Shedding (UFLS) is a last-resort protection scheme and acts as an emergency brake by shedding load to arrest frequency decline. Current an…
▽ More
High penetration of renewable resources results in a power system with lower inertia and higher frequency sensitivity to power imbalances. Such systems are becoming increasingly susceptible to frequency collapse during extreme disturbances. Under-Frequency Load Shedding (UFLS) is a last-resort protection scheme and acts as an emergency brake by shedding load to arrest frequency decline. Current and emerging efforts to optimize UFLS settings and frequency thresholds are mostly network agnostic, ignoring network spatial information. With the prevalence of Distributed Energy Resources (DERs) in the high-renewable paradigm, the power grid is becoming more bidirectional, making some locations in the network less effective for UFLS action than others. This work proposes a Mixed Integer Linear Program that optimizes the UFLS setpoints (prioritizing one location over another) to minimize frequency deviation and load-shed for a given disturbance. The formulation considers system information and DER generation mix at different network locations, increasing model fidelity. The formulation also captures the discrete nature and practical time delays and deadbands associated with UFLS using a minimal set of binary variables, reducing problem complexity. We empirically validate the optimization approach on the dynamic IEEE 39-bus system for performance metrics, including frequency nadir, steady-state frequency and total load shed.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
Towards Energysheds: A Technical Definition and Cooperative Framework for Future Power System Operations
Authors:
Dakota Hamilton,
Samuel Chevalier,
Amritanshu Pandey,
Mads Almassalkhi
Abstract:
There is growing interest in understanding how interactions between system-wide objectives and local community decision-making will impact the clean energy transition. The concept of energysheds has gained traction in the areas of public policy and social science as a way to study these relationships. However, development of technical definitions of energysheds that permit system analysis are stil…
▽ More
There is growing interest in understanding how interactions between system-wide objectives and local community decision-making will impact the clean energy transition. The concept of energysheds has gained traction in the areas of public policy and social science as a way to study these relationships. However, development of technical definitions of energysheds that permit system analysis are still largely missing. In this work, we propose a mathematical definition for energysheds, and introduce an analytical framework for studying energyshed concepts within the context of future electric power system operations. This framework is used to develop insights into the factors that impact a community's ability to achieve energyshed policy incentives within a larger connected power grid, as well as the tradeoffs associated with different spatial policy requirements. We also propose an optimization-based energyshed policy design problem, and show that it can be solved to global optimality within arbitrary precision by employing concepts from quasi-convex optimization. Finally, we investigate how interconnected energysheds can cooperatively achieve their objectives in bulk power system operations.
△ Less
Submitted 29 April, 2024; v1 submitted 27 November, 2023;
originally announced November 2023.
-
Decomposed Phase Analysis using Convex Inner Approximations: a Methodology for DER Hosting Capacity in Distribution Systems
Authors:
Hani Mavalizadeh,
Mads Almassalkhi
Abstract:
This paper uses convex inner approximations (CIA) of the AC power flow to tackle the optimization problem of quantifying a three-phase distribution feeder's capacity to host distributed energy resources (DERs). This is often connoted hosting capacity (HC), but herein we consider separative bounds for each node on positive and negative DER injections, which ensures that injections within these noda…
▽ More
This paper uses convex inner approximations (CIA) of the AC power flow to tackle the optimization problem of quantifying a three-phase distribution feeder's capacity to host distributed energy resources (DERs). This is often connoted hosting capacity (HC), but herein we consider separative bounds for each node on positive and negative DER injections, which ensures that injections within these nodal limits satisfy feeder voltage and current limits and across nodes sum up to the feeder HC. The methodology decomposes a three-phase feeder into separate phases and applies CIA-based techniques to each phase. An analysis is developed to determine the technical condition under which this per-phase approach can still guarantee three-phase constraints. New approaches are then presented that modify the per-phase optimization problems to overcome conservativeness inherent to CIA methods and increase HC, including selectively modifying the per-phase impedances and iteratively relaxing per-phase voltage bounds. Discussion is included on trade-offs and feasibility. To validate the methodology simulation-based analysis is conducted with the IEEE 37-node test feeder and a real 534-node unbalanced radial distribution feeder.
△ Less
Submitted 31 October, 2023;
originally announced October 2023.
-
Improving frequency response with synthetic dam** available from fleets of distributed energy resources
Authors:
Hani Mavalizadeh,
Luis A. Duffaut Espinosa,
Mads R. Almassalkhi
Abstract:
With the increasing use of renewable generation in power systems, responsive resources will be necessary to support primary frequency control in future low-inertia/under-damped power systems. Flexible loads can provide fast-frequency response services if coordinated effectively. However, practical implementations of such synthetic dam** services require both effective local sensing and control a…
▽ More
With the increasing use of renewable generation in power systems, responsive resources will be necessary to support primary frequency control in future low-inertia/under-damped power systems. Flexible loads can provide fast-frequency response services if coordinated effectively. However, practical implementations of such synthetic dam** services require both effective local sensing and control at the device level and an ability to accurately estimate online and predict the available synthetic dam** from a fleet. In addition, the inherent trade-off between a fleet being available for fast frequency response while providing other ancillary services needs to be characterized. In this context, the manuscript presents a novel, fully decentralized, packet-based controller for diverse flexible loads that dynamically prioritizes and interrupts loads to engender synthetic dam** suitable for primary frequency control. Moreover, the packet-based control methodology is shown to accurately characterize the available synthetic dam** in real-time, which is useful to aggregators and system operators. Furthermore, spectral analysis of historical frequency regulation data is used to produce a probabilistic bound on the expected available synthetic dam** for primary frequency control from a fleet and the trade-off from concurrently providing secondary frequency control services. Finally, numerical simulation on IEEE test networks demonstrates the effectiveness of the proposed methodology.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Statistical Modeling and Forecasting of Automatic Generation Control Signals
Authors:
Sarnaduti Brahma,
Hamid R. Ossareh,
Mads R. Almassalkhi
Abstract:
The performance of frequency regulating units for automatic generation control (AGC) of power systems depends on their ability to track the AGC signal accurately. In addition, representative models and advanced analysis and analytics can yield forecasts of the AGC signal that aids in controller design. In this paper, time-series analyses are conducted on an AGC signal, specifically the PJM Reg-D,…
▽ More
The performance of frequency regulating units for automatic generation control (AGC) of power systems depends on their ability to track the AGC signal accurately. In addition, representative models and advanced analysis and analytics can yield forecasts of the AGC signal that aids in controller design. In this paper, time-series analyses are conducted on an AGC signal, specifically the PJM Reg-D, and using the results, a statistical model is derived that fairly accurately captures its second moments and saturated nature, as well as a time-series-based predictive model to provide forecasts. As an application, the predictive model is used in a model predictive control framework to ensure optimal tracking performance of a down ramp-limited distributed energy resource coordination scheme. The results provide valuable insight into the properties of the AGC signal and indicate the effectiveness of these models in replicating its behavior.
△ Less
Submitted 10 July, 2022; v1 submitted 15 May, 2022;
originally announced May 2022.
-
Towards Optimal Kron-based Reduction Of Networks (Opti-KRON) for the Electric Power Grid
Authors:
Samuel Chevalier,
Mads R. Almassalkhi
Abstract:
For fast timescales or long prediction horizons, the AC optimal power flow (OPF) problem becomes a computational challenge for large-scale, realistic AC networks. To overcome this challenge, this paper presents a novel network reduction methodology that leverages an efficient mixed-integer linear programming (MILP) formulation of a Kron-based reduction that is optimal in the sense that it balances…
▽ More
For fast timescales or long prediction horizons, the AC optimal power flow (OPF) problem becomes a computational challenge for large-scale, realistic AC networks. To overcome this challenge, this paper presents a novel network reduction methodology that leverages an efficient mixed-integer linear programming (MILP) formulation of a Kron-based reduction that is optimal in the sense that it balances the degree of the reduction with resulting modeling errors in the reduced network. The method takes as inputs the full AC network and a pre-computed library of AC load flow data and uses the graph Laplacian to constraint nodal reductions to only be feasible for neighbors of non-reduced nodes. This results in a highly effective MILP formulation which is embedded within an iterative scheme to successively improve the Kron-based network reduction until convergence. The resulting optimal network reduction is, thus, grounded in the physics of the full network. The accuracy of the network reduction methodology is then explored for a 100+ node medium-voltage radial distribution feeder example across a wide range of operating conditions. It is finally shown that a network reduction of 25-85% can be achieved within seconds and with worst-case voltage magnitude deviation errors within any super node cluster of less than 0.01pu. These results illustrate that the proposed optimization-based approach to Kron reduction of networks is viable for larger networks and suitable for use within various power system applications.
△ Less
Submitted 20 September, 2022; v1 submitted 12 April, 2022;
originally announced April 2022.
-
Optimal Frequency Regulation using Packetized Energy Management
Authors:
Sarnaduti Brahma,
Adil Khurram,
Hamid Ossareh,
Mads Almassalkhi
Abstract:
Packetized energy management (PEM) is a demand dispatch scheme that can be used to provide ancillary services such as frequency regulation. In PEM, distributed energy resources (DERs) are granted uninterruptible access to the grid for a pre-specified time interval called the packet length. This results in a down ramp-limited response in PEM for DERs that can only consume power from the grid. In th…
▽ More
Packetized energy management (PEM) is a demand dispatch scheme that can be used to provide ancillary services such as frequency regulation. In PEM, distributed energy resources (DERs) are granted uninterruptible access to the grid for a pre-specified time interval called the packet length. This results in a down ramp-limited response in PEM for DERs that can only consume power from the grid. In this work, a linearized virtual battery model of PEM is provided that is capable of predicting the down-ramp limited output of PEM and is used in a model predictive control (MPC) framework to improve the performance of PEM in tracking an automatic generation control (AGC) signal. By performing statistical analysis on the AGC regulation signal, PJM Reg-D, an ARMA model is derived as a predictor for the MPC-based precompensator. Finally, as an alternative to MPC, it is shown that by varying the packet length as a function of time, for example through packet randomization, frequency regulation can be improved under PEM.
△ Less
Submitted 26 February, 2022; v1 submitted 27 July, 2021;
originally announced July 2021.
-
Real-time Grid and DER Co-simulation Platform for Validating Large-scale DER Control Schemes
Authors:
Adil Khurram,
Mahraz Amini,
Luis A. Duffaut Espinosa,
Paul D. H. Hines,
Mads Almassalkhi
Abstract:
Distributed energy resources (DERs) such as responsive loads and energy storage systems are valuable resources available to grid operators for balancing supply-demand mismatches via load coordination. However, consumer acceptance of load coordination schemes depends on ensuring quality of service (QoS), which embodies device-level constraints. Since each device has its own internal energy state, t…
▽ More
Distributed energy resources (DERs) such as responsive loads and energy storage systems are valuable resources available to grid operators for balancing supply-demand mismatches via load coordination. However, consumer acceptance of load coordination schemes depends on ensuring quality of service (QoS), which embodies device-level constraints. Since each device has its own internal energy state, the effect of QoS on the fleet can be cast as fleet-wide energy limits within which the aggregate "state of charge" (SoC) must be actively maintained. This requires coordination of DERs that is cognizant of the SoC, responsive to grid conditions, and depends on fast communication networks. To that effect, this paper presents a novel real-time grid-and-DER co-simulation platform for validating advanced DER coordination schemes and characterizing the capability of such a DER fleet. In particular, we present how the co-simulation platform is suitable for: i) testing real-time performance of a large fleet of DERs in delivering advanced grid services, including frequency regulation; ii) online state estimation to characterize the corresponding SoC of a large fleet of DERs; and iii) incorporating practical limitations of DERs and communications and analyzing the effects on fleet-wide performance. To illustrate these benefits of the presented grid-DER co-simulation platform, we employ the advanced DER coordination scheme called packetized energy management (PEM), which is a novel device-driven, asynchronous, and randomizing control paradigm for DERs. A fleet of thousands of PEM-enabled DERs are then added to a realistic and dynamical model of the Vermont transmission system to complete validation of the co-simulation platform.
△ Less
Submitted 3 June, 2021;
originally announced June 2021.
-
A Methodology for Quantifying Flexibility in a fleet of Diverse DERs
Authors:
Adil Khurram,
Luis A. Duffaut Espinosa,
Mads Almassalkhi
Abstract:
This paper addresses the question: how many distributed energy resources (DERs) are needed to provide $\pm1$MW of flexibility over a number of hours? For this purpose, a metric based on an ISO's own performance score is proposed. Then, a systematic procedure is presented and validated that makes use of either a simulator or the solution to an optimization problem based on a nominal analytical form…
▽ More
This paper addresses the question: how many distributed energy resources (DERs) are needed to provide $\pm1$MW of flexibility over a number of hours? For this purpose, a metric based on an ISO's own performance score is proposed. Then, a systematic procedure is presented and validated that makes use of either a simulator or the solution to an optimization problem based on a nominal analytical formulation to get flexibility in terms of kW-per-device. Furthermore, simulation-based analysis indicates that flexibility from different DER fleets adds linearly, that is, the total flexibility provided by a mixture of different DER types can be obtained as a convex combination of their individual kW-per-device flexibility. The proposed methodology is validated on ($i$) a centralized coordinator and ($ii$) a device driven DER coordination scheme called packetized energy management (PEM). Furthermore, the effect of heterogeneity as well as PEM specific parameters such as packet length and mean time-to-request on flexibility is also quantified.
△ Less
Submitted 22 December, 2020; v1 submitted 15 December, 2020;
originally announced December 2020.
-
Optimal and resilient coordination of virtual batteries in distribution feeders
Authors:
Sarnaduti Brahma,
Nawaf Nazir,
Hamid Ossareh,
Mads Almassalkhi
Abstract:
This paper presents a novel hierarchical framework for real-time, network-admissible coordination of responsive grid resources aggregated into virtual batteries (VBs). In this context, a VB represents a local aggregation of directly controlled loads, such as smart inverters, electric water heaters, and air-conditioners. The coordination is achieved by solving an optimization problem to disaggregat…
▽ More
This paper presents a novel hierarchical framework for real-time, network-admissible coordination of responsive grid resources aggregated into virtual batteries (VBs). In this context, a VB represents a local aggregation of directly controlled loads, such as smart inverters, electric water heaters, and air-conditioners. The coordination is achieved by solving an optimization problem to disaggregate a feeder's desired reference trajectory into constraint-aware set-points for the VBs. Specifically, a novel, provably-tight, convex relaxation of the AC optimal power flow (OPF) problem is presented to optimally dispatch the VBs to track the feeder's desired power trajectory. In addition to the optimal VB dispatch scheme, a real-time, corrective control scheme is designed, which is based on optimal proportional-integral (PI) control with anti-windup, to reject intra-feeder and inter-feeder disturbances that arise during operation of the power system. Simulation results conducted on a modified IEEE test system demonstrate the effectiveness of the proposed multi-layer VB coordination framework.
△ Less
Submitted 6 October, 2020;
originally announced October 2020.
-
Distributed Control of Charging for Electric Vehicle Fleets under Dynamic Transformer Ratings
Authors:
Micah Botkin-Levy,
Alexander Engelmann,
Tillmann Mühlpfordt,
Timm Faulwasser,
Mads Almassalkhi
Abstract:
Due to their large power draws and increasing adoption rates, electric vehicles (EVs) will become a significant challenge for electric distribution grids. However, with proper charging control strategies, the challenge can be mitigated without the need for expensive grid reinforcements. This manuscript presents and analyzes new distributed charging control methods to coordinate EV charging under n…
▽ More
Due to their large power draws and increasing adoption rates, electric vehicles (EVs) will become a significant challenge for electric distribution grids. However, with proper charging control strategies, the challenge can be mitigated without the need for expensive grid reinforcements. This manuscript presents and analyzes new distributed charging control methods to coordinate EV charging under nonlinear transformer temperature ratings. Specifically, we assess the trade-offs between required data communications, computational efficiency, and optimality guarantees for different control strategies based on a convex relaxation of the underlying nonlinear transformer temperature dynamics. Classical distributed control methods such as those based on dual decomposition and alternating direction method of multipliers (ADMM) are compared against the new Augmented Lagrangian-based Alternating Direction Inexact Newton (ALADIN) method and a novel low-information, look-ahead version of packetized energy management (PEM). These algorithms are implemented and analyzed for two case studies on residential and commercial EV fleets. Simulation results validate the new methods and provide insights into key trade-offs.
△ Less
Submitted 20 July, 2020;
originally announced July 2020.
-
Decentralized Frequency Control using Packet-based Energy Coordination
Authors:
Hani Mavalizadeh,
Luis A. Duffaut Espinosa,
Mads R. Almassalkhi
Abstract:
This paper presents a novel frequency-responsive control scheme for demand-side resources, such as electric water heaters. A frequency-dependent control law is designed to provide dam** from distributed energy resources (DERs) in a fully decentralized fashion. This local control policy represents a frequency-dependent threshold for each DER that ensures that the aggregate response provides dampi…
▽ More
This paper presents a novel frequency-responsive control scheme for demand-side resources, such as electric water heaters. A frequency-dependent control law is designed to provide dam** from distributed energy resources (DERs) in a fully decentralized fashion. This local control policy represents a frequency-dependent threshold for each DER that ensures that the aggregate response provides dam** during frequency deviations. The proposed decentralized policy is based on an adaptation of a packet-based DER coordination scheme where each device send requests for energy access (also called an "energy packet") to an aggregator. The number of previously accepted active packets can then be used a-priori to form an online estimate of the aggregate dam** capability of the DER fleet in a dynamic power system. A simple two-area power system is used to illustrate and validate performance of the decentralized control policy and the accuracy of the online dam** estimating for a fleet of 400,000 DERs.
△ Less
Submitted 10 July, 2020;
originally announced July 2020.
-
Stochastic multi-period optimal dispatch of energy storage in unbalanced distribution feeders
Authors:
Nawaf Nazir,
Mads Almassalkhi
Abstract:
This paper presents a convex, multi-period, AC-feasible Optimal Power Flow (OPF) framework that robustly dispatches flexible demand-side resources in unbalanced distribution feeders against uncertainty in very-short timescale solar Photo-Voltaic (PV) forecasts. This is valuable for power systems with significant behind-the-meter solar PV generation as their operation is affected by uncertainty fro…
▽ More
This paper presents a convex, multi-period, AC-feasible Optimal Power Flow (OPF) framework that robustly dispatches flexible demand-side resources in unbalanced distribution feeders against uncertainty in very-short timescale solar Photo-Voltaic (PV) forecasts. This is valuable for power systems with significant behind-the-meter solar PV generation as their operation is affected by uncertainty from forecasts of demand and solar PV generation. The aim of this work is then to ensure the feasibility and reliability of distribution system operation under high solar PV penetration. We develop and present a novel, robust OPF formulation that accounts for both the nonlinear power flow constraints and the uncertainty in forecasts. This is achieved by linearizing an optimal trajectory and using first-order methods to systematically tighten voltage bounds. Case studies on a realistic distribution feeder shows the effectiveness of a receding-horizon implementation.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
A Model-Predictive Control Method for Coordinating Virtual Power Plants and Packetized Resources, with Hardware-in-the-Loop Validation
Authors:
Mahraz Amini,
Adil Khurram,
Andrew Klem,
Mads Almassalkhi,
Paul D. H. Hines
Abstract:
In this paper, we employ a bi-level control system to react to disturbances and balance power mismatch by coordinating distributed energy resources (DERs) under packetized energy management. Packetized energy management (PEM) is a novel bottom-up asynchronous and randomizing coordination paradigm for DERs that guarantees quality of service, autonomy, and privacy to the end-user. A hardware-in-the-…
▽ More
In this paper, we employ a bi-level control system to react to disturbances and balance power mismatch by coordinating distributed energy resources (DERs) under packetized energy management. Packetized energy management (PEM) is a novel bottom-up asynchronous and randomizing coordination paradigm for DERs that guarantees quality of service, autonomy, and privacy to the end-user. A hardware-in-the-loop (HIL) simulation of a cyber-physical system consisting of PEM enabled DERs, flexible virtual power plants (VPPs) and transmission grid is developed in this work. A predictive, energy-constrained dispatch of aggregated PEM-enabled DERs is formulated, implemented, and validated on the HIL cyber-physical platform. The energy state of VPPs, composed of a fleet of diverse DERs distributed in the grid, depending upon the distinct real-time usage of these devices. The experimental results demonstrate that the existing control schemes, such as AGC, dispatch VPPs without regard to their energy state, which leads to unexpected capacity saturation. By accounting for, the energy states of VPPs, model-predictive control (MPC) can optimally dispatch conventional generators and VPPs to overcome disturbances while avoiding undesired capacity saturation. The results show the improvement in dynamics by using MPC over conventional AGC and droop for a system with energy-constrained resource
△ Less
Submitted 11 January, 2019;
originally announced January 2019.