-
High order direct parametrisation of invariant manifolds for model order reduction of finite element structures: application to large amplitude vibrations and uncovering of a folding point
Authors:
Alessandra Vizzaccaro,
Andrea Opreni,
Loïc Salles,
Attilio Frangi,
Cyril Touzé
Abstract:
This paper investigates model-order reduction methods for geometrically nonlinear structures. The parametrisation method of invariant manifolds is used and adapted to the case of mechanical systems expressed in the physical basis, so that the technique is directly applicable to problems discretised by the finite element method. Two nonlinear map**s, respectively related to displacement and veloc…
▽ More
This paper investigates model-order reduction methods for geometrically nonlinear structures. The parametrisation method of invariant manifolds is used and adapted to the case of mechanical systems expressed in the physical basis, so that the technique is directly applicable to problems discretised by the finite element method. Two nonlinear map**s, respectively related to displacement and velocity, are introduced, and the link between the two is made explicit at arbitrary order of expansion. The same development is performed on the reduced-order dynamics which is computed at generic order following the different styles of parametrisation. More specifically, three different styles are introduced and commented: the graph style, the complex normal form style and the real normal form style. These developments allow making better connections with earlier works using these parametrisation methods. The technique is then applied to three different examples. A clamped-clamped arch with increasing curvature is first used to show an example of a system with a softening behaviour turning to hardening at larger amplitudes, which can be replicated with a single mode reduction. Secondly, the case of a cantilever beam is investigated. It is shown that the invariant manifold of the first mode shows a folding point at large amplitudes which is not connected to an internal resonance. This exemplifies the failure of the graph style due to the folding point, whereas the normal form style is able to pass over the folding. Finally, A MEMS micromirror undergoing large rotations is used to show the importance of using high-order expansions on an industrial example.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
-
Model Order Reduction based on Direct Normal Form: Application to Large Finite Element MEMS Structures Featuring Internal Resonance
Authors:
Andrea Opreni,
Alessandra Vizzaccaro,
Attilio Frangi,
Cyril Touzé
Abstract:
Dimensionality reduction in mechanical vibratory systems poses challenges for distributed structures including geometric nonlinearities, mainly because of the lack of invariance of the linear subspaces. A reduction method based on direct normal form computation for large finite element (FE) models is here detailed. The main advantage resides in operating directly from the physical space, hence avo…
▽ More
Dimensionality reduction in mechanical vibratory systems poses challenges for distributed structures including geometric nonlinearities, mainly because of the lack of invariance of the linear subspaces. A reduction method based on direct normal form computation for large finite element (FE) models is here detailed. The main advantage resides in operating directly from the physical space, hence avoiding the computation of the complete eigenfunctions spectrum. Explicit solutions are given, thus enabling a fully non-intrusive version of the reduction method. The reduced dynamics is obtained from the normal form of the geometrically nonlinear mechanical problem, free of non-resonant monomials, and truncated to the selected master coordinates, thus making a direct link with the parametrisation of invariant manifolds. The method is fully expressed with a complex-valued formalism by detailing the homological equations in a systematic manner, and the link with real-valued expressions is established. A special emphasis is put on the treatment of second-order internal resonances and the specific case of a 1:2 resonance is made explicit. Finally, applications to large-scale models of Micro-Electro-Mechanical structures featuring 1:2 and 1:3 resonances are reported, along with considerations on computational efficiency.
△ Less
Submitted 18 March, 2021;
originally announced March 2021.
-
Direct computation of nonlinear map** via normal form for reduced-order models of finite element nonlinear structures
Authors:
Alessandra Vizzaccaro,
Yichang Shen,
Loïc Salles,
Jiří Blahoš,
Cyril Touzé
Abstract:
The direct computation of the third-order normal form for a geometrically nonlinear structure discretised with the finite element (FE) method, is detailed. The procedure allows to define a nonlinear map** in order to derive accurate reduced-order models (ROM) relying on invariant manifold theory. The proposed reduction strategy is direct and simulation free, in the sense that it allows to pass f…
▽ More
The direct computation of the third-order normal form for a geometrically nonlinear structure discretised with the finite element (FE) method, is detailed. The procedure allows to define a nonlinear map** in order to derive accurate reduced-order models (ROM) relying on invariant manifold theory. The proposed reduction strategy is direct and simulation free, in the sense that it allows to pass from physical coordinates (FE nodes) to normal coordinates, describing the dynamics in an invariant-based span of the phase space. The number of master modes for the ROM is not a priori limited since a complete change of coordinate is proposed. The underlying theory ensures the quality of the predictions thanks to the invariance property of the reduced subspace, together with their curvatures in phase space that accounts for the nonresonant nonlinear couplings. The method is applied to a beam discretised with 3D elements and shows its ability in recovering internal resonance at high energy. Then a fan blade model is investigated and the correct prediction given by the ROMs are assessed and discussed. A method is proposed to approximate an aggregate value for the dam**, that takes into account the dam** coefficients of all the slave modes, and also using the Rayleigh dam** model as input. Frequency-response curves for the beam and the blades are then exhibited, showing the accuracy of the proposed method.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Non-intrusive reduced order modelling for the dynamics of geometrically nonlinear flat structures using three-dimensional finite elements
Authors:
Alessandra Vizzaccaro,
Arthur Givois,
Pierluigi Longobardi,
Yichang Shen,
Jean-François Deü,
Loïc Salles,
Cyril Touzé,
Olivier Thomas
Abstract:
Non-intrusive methods have been used since two decades to derive reduced-order models for geometrically nonlinear structures, with a particular emphasis on the so-called STiffness Evaluation Procedure (STEP), relying on the static application of prescribed displacements in a finite-element context. We show that a particularly slow convergence of the modal expansion is observed when applying the me…
▽ More
Non-intrusive methods have been used since two decades to derive reduced-order models for geometrically nonlinear structures, with a particular emphasis on the so-called STiffness Evaluation Procedure (STEP), relying on the static application of prescribed displacements in a finite-element context. We show that a particularly slow convergence of the modal expansion is observed when applying the method with 3D elements, because of nonlinear couplings occurring with very high frequency modes involving 3D thickness deformations. Focusing on the case of flat structures, we first show by computing all the modes of the structure that a converged solution can be exhibited by using either static condensation or normal form theory. We then show that static modal derivatives provide the same solution with fewer calculations. Finally, we propose a modified STEP, where the prescribed displacements are imposed solely on specific degrees of freedom of the structure, and show that this adjustment also provides efficiently a converged solution.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Comparison of nonlinear map**s for reduced-order modelling of vibrating structures: normal form theory and quadratic manifold method with modal derivatives
Authors:
Alessandra Vizzaccaro,
Loïc Salles,
Cyril Touzé
Abstract:
The objective of this contribution is to compare two methods proposed recently in order to build efficient reduced-order models for geometrically nonlinear structures. The first method relies on the normal form theory that allows one to obtain a nonlinear change of coordinates for expressing the reduced-order dynamics in an invariant-based span of the phase space. The second method is the modal de…
▽ More
The objective of this contribution is to compare two methods proposed recently in order to build efficient reduced-order models for geometrically nonlinear structures. The first method relies on the normal form theory that allows one to obtain a nonlinear change of coordinates for expressing the reduced-order dynamics in an invariant-based span of the phase space. The second method is the modal derivative (MD) approach, and more specifically the quadratic manifold defined in order to derive a second-order nonlinear change of coordinates. Both methods share a common point of view, willing to introduce a nonlinear map** to better define a reduced order model that could take more properly into account the nonlinear restoring forces. However the calculation methods are different and the quadratic manifold approach has not the invariance property embedded in its definition. Modal derivatives and static modal derivatives are investigated, and their distinctive features in the treatment of the quadratic nonlinearity is underlined. Assuming a slow/fast decomposition allows understanding how the three methods tend to share equivalent properties. While they give proper estimations for flat symmetric structures having a specific shape of nonlinearities and a clear slow/fast decomposition between flexural and in-plane modes, the treatment of the quadratic nonlinearity makes the predictions different in the case of curved structures such as arches and shells. In the more general case, normal form approach appears preferable since it allows correct predictions of a number of important nonlinear features, including for example the hardening/softening behaviour, whatever the relationships between slave and master coordinates are.
△ Less
Submitted 23 September, 2020; v1 submitted 8 July, 2020;
originally announced July 2020.
