-
Heterogeneous Rank Beamforming for Industrial Communications
Authors:
Andrea Bedin,
Akshay Jain,
Andrea Zanella,
Karthik Upadhya
Abstract:
This paper proposes a novel hardware beamforming architecture, which is capable of utilizing a different number of Radio Frequency (RF) chains in different parts of the bandwidth. It also shows that a proportional fairness scheduler will effectively utilize the high rank part of the bandwidth in a multi-user setting, thus operating more efficiently and effectively than classical beamforming scheme…
▽ More
This paper proposes a novel hardware beamforming architecture, which is capable of utilizing a different number of Radio Frequency (RF) chains in different parts of the bandwidth. It also shows that a proportional fairness scheduler will effectively utilize the high rank part of the bandwidth in a multi-user setting, thus operating more efficiently and effectively than classical beamforming schemes.
△ Less
Submitted 22 September, 2023;
originally announced September 2023.
-
28 GHz NLOS Channel Measurements Revealing Low Path Loss and High Angular Spread in Container Ports
Authors:
Andrea Bedin,
Dmitry Chizhik,
**feng Du,
Martti Moisio,
Karthik Upadhya,
Reinaldo Valenzuela,
Mikko A. Uusitalo
Abstract:
This paper presents results from a comprehensive measurement campaign conducted at 28 GHz inside a container canyon within a commercial port environment. The measurements are performed at various points inside the container canyon, considering two types of container stacking and two different Transmitter (TX) locations, using a narrowband channel sounder equipped with a rotating horn antenna. The…
▽ More
This paper presents results from a comprehensive measurement campaign conducted at 28 GHz inside a container canyon within a commercial port environment. The measurements are performed at various points inside the container canyon, considering two types of container stacking and two different Transmitter (TX) locations, using a narrowband channel sounder equipped with a rotating horn antenna. The measurements are used to evaluate the azimuthal spectrum and spatial correlation, as well as the impact of a vehicle inside a canyon on these parameters. Further, the measurement data is utilized to validate a simulation setup from which the path loss and the elevation spectrum inside the canyon is obtained. Lastly, a propagation model inside the canyon is hypothesized and shown to be consistent with the measurements. The analysis show a low path loss compared to free space, as well as a high angular spread and short spatial correlation.
△ Less
Submitted 6 September, 2023;
originally announced September 2023.
-
XNLI 2.0: Improving XNLI dataset and performance on Cross Lingual Understanding (XLU)
Authors:
Ankit Kumar Upadhyay,
Harsit Kumar Upadhya
Abstract:
Natural Language Processing systems are heavily dependent on the availability of annotated data to train practical models. Primarily, models are trained on English datasets. In recent times, significant advances have been made in multilingual understanding due to the steeply increasing necessity of working in different languages. One of the points that stands out is that since there are now so man…
▽ More
Natural Language Processing systems are heavily dependent on the availability of annotated data to train practical models. Primarily, models are trained on English datasets. In recent times, significant advances have been made in multilingual understanding due to the steeply increasing necessity of working in different languages. One of the points that stands out is that since there are now so many pre-trained multilingual models, we can utilize them for cross-lingual understanding tasks. Using cross-lingual understanding and Natural Language Inference, it is possible to train models whose applications extend beyond the training language. We can leverage the power of machine translation to skip the tiresome part of translating datasets from one language to another. In this work, we focus on improving the original XNLI dataset by re-translating the MNLI dataset in all of the 14 different languages present in XNLI, including the test and dev sets of XNLI using Google Translate. We also perform experiments by training models in all 15 languages and analyzing their performance on the task of natural language inference. We then expand our boundary to investigate if we could improve performance in low-resource languages such as Swahili and Urdu by training models in languages other than English.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Digital Twins for Industry 4.0 in the 6G Era
Authors:
Bin Han,
Mohammad Asif Habibi,
Bjoern Richerzhagen,
Kim Schindhelm,
Florian Zeiger,
Fabrizio Lamberti,
Filippo Gabriele Pratticò,
Karthik Upadhya,
Charalampos Korovesis,
Ioannis-Prodromos Belikaidis,
Panagiotis Demestichas,
Siyu Yuan,
Hans D. Schotten
Abstract:
Having the Fifth Generation (5G) mobile communication system recently rolled out in many countries, the wireless community is now setting its eyes on the next era of Sixth Generation (6G). Inheriting from 5G its focus on industrial use cases, 6G is envisaged to become the infrastructural backbone of future intelligent industry. Especially, a combination of 6G and the emerging technologies of Digit…
▽ More
Having the Fifth Generation (5G) mobile communication system recently rolled out in many countries, the wireless community is now setting its eyes on the next era of Sixth Generation (6G). Inheriting from 5G its focus on industrial use cases, 6G is envisaged to become the infrastructural backbone of future intelligent industry. Especially, a combination of 6G and the emerging technologies of Digital Twins (DT) will give impetus to the next evolution of Industry 4.0 (I4.0) systems. This article provides a survey in the research area of 6G-empowered industrial DT system. With a novel vision of 6G industrial DT ecosystem, this survey discusses the ambitions and potential applications of industrial DT in the 6G era, identifying the emerging challenges as well as the key enabling technologies. The introduced ecosystem is supposed to bridge the gaps between humans, machines, and the data infrastructure, and therewith enable numerous novel application scenarios.
△ Less
Submitted 15 October, 2023; v1 submitted 5 October, 2022;
originally announced October 2022.
-
Jamming Resilient Indoor Factory Deployments: Design and Performance Evaluation
Authors:
Leonardo Chiarello,
Paolo Baracca,
Karthik Upadhya,
Saeed R. Khosravirad,
Silvio Mandelli,
Thorsten Wild
Abstract:
In the framework of 5G-and-beyond Industry 4.0, jamming attacks for denial of service are a rising threat which can severely compromise the system performance. Therefore, in this paper we deal with the problem of jamming detection and mitigation in indoor factory deployments. We design two jamming detectors based on pseudo-random blanking of subcarriers with orthogonal frequency division multiplex…
▽ More
In the framework of 5G-and-beyond Industry 4.0, jamming attacks for denial of service are a rising threat which can severely compromise the system performance. Therefore, in this paper we deal with the problem of jamming detection and mitigation in indoor factory deployments. We design two jamming detectors based on pseudo-random blanking of subcarriers with orthogonal frequency division multiplexing and consider jamming mitigation with frequency hop** and random scheduling of the user equipments. We then evaluate the performance of the system in terms of achievable BLER with ultra-reliable low-latency communications traffic and jamming missed detection probability. Simulations are performed considering a 3rd Generation Partnership Project spatial channel model for the factory floor with a jammer stationed outside the plant trying to disrupt the communication inside the factory. Numerical results show that jamming resiliency increases when using a distributed access point deployment and exploiting channel correlation among antennas for jamming detection, while frequency hop** is helpful in jamming mitigation only for strict BLER requirements.
△ Less
Submitted 2 February, 2022;
originally announced February 2022.
-
Jamming Detection With Subcarrier Blanking for 5G and Beyond in Industry 4.0 Scenarios
Authors:
Leonardo Chiarello,
Paolo Baracca,
Karthik Upadhya,
Saeed R. Khosravirad,
Thorsten Wild
Abstract:
Security attacks at the physical layer, in the form of radio jamming for denial of service, are an increasing threat in the Industry 4.0 scenarios. In this paper, we consider the problem of jamming detection in 5G-and-beyond communication systems and propose a defense mechanism based on pseudo-random blanking of subcarriers with orthogonal frequency division multiplexing (OFDM). We then design a d…
▽ More
Security attacks at the physical layer, in the form of radio jamming for denial of service, are an increasing threat in the Industry 4.0 scenarios. In this paper, we consider the problem of jamming detection in 5G-and-beyond communication systems and propose a defense mechanism based on pseudo-random blanking of subcarriers with orthogonal frequency division multiplexing (OFDM). We then design a detector by applying the generalized likelihood ratio test (GLRT) on those subcarriers. We finally evaluate the performance of the proposed technique against a smart jammer, which is pursuing one of the following objectives: maximize stealthiness, minimize spectral efficiency (SE) with mobile broadband (MBB) type of traffic, and maximize block error rate (BLER) with ultra-reliable low-latency communications (URLLC). Numerical results show that a smart jammer a) needs to compromise between missed detection (MD) probability and SE reduction with MBB and b) can achieve low detectability and high system performance degradation with URLLC only if it has sufficiently high power.
△ Less
Submitted 15 June, 2021;
originally announced June 2021.
-
On the Spectral Efficiency for Massive MIMO Systems With Imperfect Spacial Covariance Information
Authors:
A. K. Kocharlakota,
K. Upadhya,
S. A. Vorobyov
Abstract:
This paper studies the impact of imperfect channel covariance information on the uplink (UL) and downlink (DL) spectral efficiencies (SEs) of a time-division duplexed (TDD) massive multiple-input multiple-output (MIMO) system. We derive closed-form expressions for the UL and DL average SEs by considering linear minimum mean squared (LMMSE)-type and element-wise LMMSE-type channel estimation that r…
▽ More
This paper studies the impact of imperfect channel covariance information on the uplink (UL) and downlink (DL) spectral efficiencies (SEs) of a time-division duplexed (TDD) massive multiple-input multiple-output (MIMO) system. We derive closed-form expressions for the UL and DL average SEs by considering linear minimum mean squared (LMMSE)-type and element-wise LMMSE-type channel estimation that represent LMMSE and element-wise LMMSE with estimated covariance matrices, respectively. The closed-form expressions of these average SEs are functions of the number of observations used for estimating the spatial covariance matrices of individual and contaminated channels of a target user, and thus enable us to select these key parameters to achieve the desired SE. We present a theoretical analysis of SE behavior for different values of these parameters, followed by simulations, which also demonstrate and validate this behavior. Specifically, we present the SEs computed using estimated covariance matrices and show the accurate agreement between the theoretical and simulated SEs as functions of the number of observations for estimating the covariance matrices of individual and contaminated channels of a user. We also compare these SEs across channel estimation techniques using analytical and simulation studies.
△ Less
Submitted 12 September, 2019; v1 submitted 28 March, 2019;
originally announced March 2019.
-
Covariance Matrix Estimation for Massive MIMO
Authors:
Karthik Upadhya,
Sergiy A. Vorobyov
Abstract:
We propose a novel pilot structure for covariance matrix estimation in massive multiple-input multiple-output (MIMO) systems in which each user transmits two pilot sequences, with the second pilot sequence multiplied by a random phase-shift. The covariance matrix of a particular user is obtained by computing the sample cross-correlation of the channel estimates obtained from the two pilot sequence…
▽ More
We propose a novel pilot structure for covariance matrix estimation in massive multiple-input multiple-output (MIMO) systems in which each user transmits two pilot sequences, with the second pilot sequence multiplied by a random phase-shift. The covariance matrix of a particular user is obtained by computing the sample cross-correlation of the channel estimates obtained from the two pilot sequences. This approach relaxes the requirement that all the users transmit their uplink pilots over the same set of symbols. We derive expressions for the achievable rate and the mean-squared error of the covariance matrix estimate when the proposed method is used with staggered pilots. The performance of the proposed method is compared with existing methods through simulations.
△ Less
Submitted 7 March, 2018; v1 submitted 5 February, 2018;
originally announced February 2018.
-
Downlink Performance of Superimposed Pilots in Massive MIMO systems
Authors:
Karthik Upadhya,
Sergiy A. Vorobyov,
Mikko Vehkapera
Abstract:
In this paper, we investigate the downlink throughput performance of a massive multiple-input multiple-output (MIMO) system that employs superimposed pilots for channel estimation. The component of downlink (DL) interference that results from transmitting data alongside pilots in the uplink (UL) is shown to decrease at a rate proportional to the square root of the number of antennas at the BS. The…
▽ More
In this paper, we investigate the downlink throughput performance of a massive multiple-input multiple-output (MIMO) system that employs superimposed pilots for channel estimation. The component of downlink (DL) interference that results from transmitting data alongside pilots in the uplink (UL) is shown to decrease at a rate proportional to the square root of the number of antennas at the BS. The normalized mean-squared error (NMSE) of the channel estimate is compared with the Bayesian Cramér-Rao lower bound that is derived for the system, and the former is also shown to diminish with increasing number of antennas at the base station (BS). Furthermore, we show that staggered pilots are a particular case of superimposed pilots and offer the downlink throughput of superimposed pilots while retaining the UL spectral and energy efficiency of regular pilots. We also extend the framework for designing a hybrid system, consisting of users that transmit either regular or superimposed pilots, to minimize both the UL and DL interference. The improved NMSE and DL rates of the channel estimator based on superimposed pilots are demonstrated by means of simulations.
△ Less
Submitted 20 March, 2018; v1 submitted 14 June, 2016;
originally announced June 2016.
-
Superimposed Pilots are Superior for Mitigating Pilot Contamination in Massive MIMO
Authors:
Karthik Upadhya,
Sergiy A. Vorobyov,
Mikko Vehkapera
Abstract:
In this paper, superimposed pilots are introduced as an alternative to time-multiplexed pilot and data symbols for mitigating pilot contamination in massive multiple-input multiple-output (MIMO) systems. We propose a non-iterative scheme for uplink channel estimation based on superimposed pilots and derive an expression for the uplink signal-to-interference-plus-noise ratio (SINR) at the output of…
▽ More
In this paper, superimposed pilots are introduced as an alternative to time-multiplexed pilot and data symbols for mitigating pilot contamination in massive multiple-input multiple-output (MIMO) systems. We propose a non-iterative scheme for uplink channel estimation based on superimposed pilots and derive an expression for the uplink signal-to-interference-plus-noise ratio (SINR) at the output of a matched filter employing this channel estimate. Based on this expression, we observe that power control is essential when superimposed pilots are employed. Moreover, the quality of the channel estimate can be improved by reducing the interference that results from transmitting data alongside the pilots, and an intuitive iterative data-aided scheme that reduces this component of interference is also proposed. Approximate expressions for the uplink SINR are provided for the iterative data-aided method as well. In addition, we show that a hybrid system with users utilizing both time-multiplexed and superimposed pilots is superior to an optimally designed system that employs only time-multiplexed pilots, even when the non-iterative channel estimate is used to build the detector and precoder. We also describe a simple approach to implement this hybrid system by minimizing the overall inter and intra-cell interference. Numerical simulations demonstrating the performance of the proposed channel estimation schemes and the superiority of the hybrid system are also provided.
△ Less
Submitted 2 August, 2017; v1 submitted 2 March, 2016;
originally announced March 2016.
-
A Risk Minimization Framework for Channel Estimation in OFDM Systems
Authors:
Karthik Upadhya,
Chandra Sekhar Seelamantula,
K. V. S. Hari
Abstract:
We address the problem of channel estimation for cyclic-prefix (CP) Orthogonal Frequency Division Multiplexing (OFDM) systems. We model the channel as a vector of unknown deterministic constants and hence, do not require prior knowledge of the channel statistics. Since the mean-square error (MSE) is not computable in practice, in such a scenario, we propose a novel technique using Stein's lemma to…
▽ More
We address the problem of channel estimation for cyclic-prefix (CP) Orthogonal Frequency Division Multiplexing (OFDM) systems. We model the channel as a vector of unknown deterministic constants and hence, do not require prior knowledge of the channel statistics. Since the mean-square error (MSE) is not computable in practice, in such a scenario, we propose a novel technique using Stein's lemma to obtain an unbiased estimate of the mean-square error, namely the Stein's unbiased risk estimate (SURE). We obtain an estimate of the channel from noisy observations using linear and nonlinear denoising functions, whose parameters are chosen to minimize SURE. Based on computer simulations, we show that using SURE-based channel estimate in equalization offers an improvement in signal-to-noise ratio of around 2.25 dB over the maximum-likelihood channel estimate, in practical channel scenarios, without assuming prior knowledge of channel statistics.
△ Less
Submitted 22 October, 2014;
originally announced October 2014.
