-
Enabling Cooperative Hybrid Beamforming in TDD-based Distributed MIMO Systems
Authors:
Nariman Torkzaban,
Amir Khojastepour,
John S. Baras
Abstract:
Distributed massive MIMO networks are envisioned to realize cooperative multi-point transmission in next-generation wireless systems. For efficient cooperative hybrid beamforming, the cluster of access points (APs) needs to obtain precise estimates of the uplink channel to perform reliable downlink precoding. However, due to the radio frequency (RF) impairments between the transceivers at the two…
▽ More
Distributed massive MIMO networks are envisioned to realize cooperative multi-point transmission in next-generation wireless systems. For efficient cooperative hybrid beamforming, the cluster of access points (APs) needs to obtain precise estimates of the uplink channel to perform reliable downlink precoding. However, due to the radio frequency (RF) impairments between the transceivers at the two en-points of the wireless channel, full channel reciprocity does not hold which results in performance degradation in the cooperative hybrid beamforming (CHBF) unless a suitable reciprocity calibration mechanism is in place. We propose a two-step approach to calibrate any two hybrid nodes in the distributed MIMO system. We then present and utilize the novel concept of reciprocal tandem to propose a low-complexity approach for jointly calibrating the cluster of APs and estimating the downlink channel. Finally, we validate our calibration technique's effectiveness through numerical simulation.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Blind Cyclic Prefix-based CFO Estimation in MIMO-OFDM Systems
Authors:
Nariman Torkzaban,
Amir Khojastepour,
John S. Baras
Abstract:
Low-complexity estimation and correction of carrier frequency offset (CFO) are essential in orthogonal frequency division multiplexing (OFDM). In this paper, we propose a low-overhead blind CFO estimation technique based on cyclic prefix (CP), in multi-input multi-output (MIMO)-OFDM systems. We propose to use antenna diversity for CFO estimation. Given that the RF chains for all antenna elements a…
▽ More
Low-complexity estimation and correction of carrier frequency offset (CFO) are essential in orthogonal frequency division multiplexing (OFDM). In this paper, we propose a low-overhead blind CFO estimation technique based on cyclic prefix (CP), in multi-input multi-output (MIMO)-OFDM systems. We propose to use antenna diversity for CFO estimation. Given that the RF chains for all antenna elements at a communication node share the same clock, the carrier frequency offset (CFO) between two points may be estimated by using the combination of the received signal at all antennas. We improve our method by combining the antenna diversity with time diversity by considering the CP for multiple OFDM symbols. We provide a closed-form expression for CFO estimation and present algorithms that can considerably improve the CFO estimation performance at the expense of a linear increase in computational complexity. We validate the effectiveness of our estimation scheme via extensive numerical analysis.
△ Less
Submitted 29 August, 2023;
originally announced August 2023.
-
Multi-user Beam Alignment in Presence of Multi-path
Authors:
Nariman Torkzaban,
Mohammad A.,
Khojastepour,
John S. Baras
Abstract:
To overcome the high path-loss and the intense shadowing in millimeter-wave (mmWave) communications, effective beamforming schemes are required which incorporate narrow beams with high beamforming gains. The mmWave channel consists of a few spatial clusters each associated with an angle of departure (AoD). The narrow beams must be aligned with the channel AoDs to increase the beamforming gain. Thi…
▽ More
To overcome the high path-loss and the intense shadowing in millimeter-wave (mmWave) communications, effective beamforming schemes are required which incorporate narrow beams with high beamforming gains. The mmWave channel consists of a few spatial clusters each associated with an angle of departure (AoD). The narrow beams must be aligned with the channel AoDs to increase the beamforming gain. This is achieved through a procedure called beam alignment (BA). Most of the BA schemes in the literature consider channels with a single dominant path while in practice the channel has a few resolvable paths with different AoDs, hence, such BA schemes may not work correctly in the presence of multi-path or at the least do not exploit such multipath to achieve diversity or increase robustness.
In this paper, we propose an efficient BA scheme in presence of multi-path. The proposed BA scheme transmits probing packets using a set of scanning beams and receives feedback for all the scanning beams at the end of the probing phase from each user. We formulate the BA scheme as minimizing the expected value of the average transmission beamwidth under different policies. The policy is defined as a function from the set of received feedback to the set of transmission beams (TB). In order to maximize the number of possible feedback sequences, we prove that the set of scanning beams (SB) has a special form, namely, Tulip Design. Consequently, we rewrite the minimization problem with a set of linear constraints and a reduced number of variables which is solved by using an efficient greedy algorithm.
△ Less
Submitted 13 February, 2022;
originally announced February 2022.
-
Codebook Design for Composite Beamforming in Next-generation mmWave Systems
Authors:
Nariman Torkzaban,
Mohamamd A.,
Khojastepour,
John S. Baras
Abstract:
In pursuance of the unused spectrum in higher frequencies, millimeter wave (mmWave) bands have a pivotal role. However, the high path-loss and poor scattering associated with mmWave communications highlight the necessity of employing effective beamforming techniques. In order to efficiently search for the beam to serve a user and to jointly serve multiple users it is often required to use a compos…
▽ More
In pursuance of the unused spectrum in higher frequencies, millimeter wave (mmWave) bands have a pivotal role. However, the high path-loss and poor scattering associated with mmWave communications highlight the necessity of employing effective beamforming techniques. In order to efficiently search for the beam to serve a user and to jointly serve multiple users it is often required to use a composite beam which consists of multiple disjoint lobes. A composite beam covers multiple desired angular coverage intervals (ACIs) and ideally has maximum and uniform gain (smoothness) within each desired ACI, negligible gain (leakage) outside the desired ACIs, and sharp edges. We propose an algorithm for designing such ideal composite codebook by providing an analytical closed-form solution with low computational complexity. There is a fundamental trade-off between the gain, leakage and smoothness of the beams. Our design allows to achieve different values in such trade-off based on changing the design parameters. We highlight the shortcomings of the uniform linear arrays (ULAs) in building arbitrary composite beams. Consequently, we use a recently introduced twin-ULA (TULA) antenna structure to effectively resolve these inefficiencies. Numerical results are used to validate the theoretical findings.
△ Less
Submitted 7 February, 2022;
originally announced February 2022.
-
Sha** mmWave Wireless Channel via Multi-Beam Design using Reconfigurable Intelligent Surfaces
Authors:
Nariman Torkzaban,
Mohammad A. Amir Khojastepour
Abstract:
Millimeter-wave (mmWave) communications is considered as a key enabler towards the realization of next-generation wireless networks, due to the abundance of available spectrum at mmWave frequencies. However, mmWave suffers from high free-space path-loss and poor scattering resulting in mostly line-of-sight (LoS) channels which result in a lack of coverage. Reconfigurable intelligent surfaces (RIS)…
▽ More
Millimeter-wave (mmWave) communications is considered as a key enabler towards the realization of next-generation wireless networks, due to the abundance of available spectrum at mmWave frequencies. However, mmWave suffers from high free-space path-loss and poor scattering resulting in mostly line-of-sight (LoS) channels which result in a lack of coverage. Reconfigurable intelligent surfaces (RIS), as a new paradigm, have the potential to fill the coverage holes by sha** the wireless channel. In this paper, we propose a novel approach for designing RIS with elements arranged in a uniform planar array (UPA) structure. In what we refer to as multi-beamforming, We propose and design RIS such that the reflected beam comprises multiple disjoint lobes. Moreover, the beams have optimized gain within the desired angular coverage with fairly sharp edges avoiding power leakage to other regions. We provide a closed-form low-complexity solution for the multi-beamforming design. We confirm our theoretical results by numerical analysis.
△ Less
Submitted 11 October, 2021; v1 submitted 30 September, 2021;
originally announced October 2021.
-
Controller Placement in SDN-enabled 5G Satellite-Terrestrial Networks
Authors:
Nariman Torkzaban,
John S. Baras
Abstract:
SDN-enabled Integrated satellite-terrestrial networks (ISTNs), can provide several advantages including global seamless coverage, high reliability, low latency, etc. and can be a key enabler towards next generation networks. To deal with the complexity of the control and management of the integrated network, leveraging the concept of software-defined networking (SDN) will be helpful. In this regar…
▽ More
SDN-enabled Integrated satellite-terrestrial networks (ISTNs), can provide several advantages including global seamless coverage, high reliability, low latency, etc. and can be a key enabler towards next generation networks. To deal with the complexity of the control and management of the integrated network, leveraging the concept of software-defined networking (SDN) will be helpful. In this regard, the SDN controller placement problem in SDN-enabled ISTNs becomes of paramount importance. In this paper, we formulate an optimization problem for the SDN controller placement with the objective of minimizing the average failure probability of SDN control paths to ensure the SDN switches receive the instructions in the most reliable fashion. Simultaneously, we aim at deploying the SDN controllers close to the satellite gateways to ensure the connection between the two layers occurs with the lowest latency. We first model the problem as a mixed integer linear program (MILP). To reduce the time complexity of the MILP model, we use submodular optimization techniques to generate near-optimal solutions in a time-efficient manner. Finally, we verify the effectiveness of our approach by means of simulation, showing that the approximation method results in a reasonable optimality gap with respect to the exact MILP solution.
△ Less
Submitted 20 August, 2021;
originally announced August 2021.
-
On the Importance of Trust in Next-Generation Networked CPS Systems: An AI Perspective
Authors:
Anousheh Gholami,
Nariman Torkzaban,
John S. Baras
Abstract:
With the increasing scale, complexity, and heterogeneity of the next generation networked systems, seamless control, management, and security of such systems becomes increasingly challenging. Many diverse applications have driven interest in networked systems, including large-scale distributed learning, multi-agent optimization, 5G service provisioning, and network slicing, etc. In this paper, we…
▽ More
With the increasing scale, complexity, and heterogeneity of the next generation networked systems, seamless control, management, and security of such systems becomes increasingly challenging. Many diverse applications have driven interest in networked systems, including large-scale distributed learning, multi-agent optimization, 5G service provisioning, and network slicing, etc. In this paper, we propose trust as a measure to evaluate the status of network agents and improve the decision-making process. We interpret trust as a relation among entities that participate in various protocols. Trust relations are based on evidence created by the interactions of entities within a protocol and may be a composite of multiple metrics such as availability, reliability, resilience, etc. depending on application context. We first elaborate on the importance of trust as a metric and then present a mathematical framework for trust computation and aggregation within a network. Then we show in practice, how trust can be integrated into network decision-making processes by presenting two examples. In the first example, we show how utilizing the trust evidence can improve the performance and the security of Federated Learning. Second, we show how a 5G network resource provisioning framework can be improved when augmented with a trust-aware decision-making scheme. We verify the validity of our trust-based approach through simulations. Finally, we explain the challenges associated with aggregating the trust evidence and briefly explain our ideas to tackle them.
△ Less
Submitted 15 April, 2021;
originally announced April 2021.
-
Joint Satellite Gateway Deployment & Controller Placement in Software-Defined 5G-Satellite Integrated Networks
Authors:
Nariman Torkzaban,
John S. Baras
Abstract:
Several challenging optimization problems arise while considering the deployment of the space-air-ground integrated networks (SAGINs), among which the optimal satellite gateway deployment problem is of significant importance. Moreover, with the increasing interest in the software-defined integration of 5G networks and satellites, the existence of an effective scheme for optimal placement of SDN co…
▽ More
Several challenging optimization problems arise while considering the deployment of the space-air-ground integrated networks (SAGINs), among which the optimal satellite gateway deployment problem is of significant importance. Moreover, with the increasing interest in the software-defined integration of 5G networks and satellites, the existence of an effective scheme for optimal placement of SDN controllers is essential. In this paper, we discuss the interrelation between the two problems above and propose suitable methods to solve them under various network design criteria. We first provide a MILP model for solving the joint problem, and then motivate the decomposition of the model into two disjoint MILPs. We then show that the resulting problems can be modeled as the optimization of submodular set functions and can be solved efficiently with provable optimality gaps.
△ Less
Submitted 19 March, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Joint Mobility-Aware UAV Placement and Routing in Multi-Hop UAV Relaying Systems
Authors:
Anousheh Gholami,
Nariman Torkzaban,
John S. Baras,
Chrysa Papagianni
Abstract:
Unmanned Aerial Vehicles (UAVs) have been extensively utilized to provide wireless connectivity in rural and under-developed areas, enhance network capacity and provide support for peaks or unexpected surges in user demand, mainly due to their fast deployment, cost-efficiency and superior communication performance resulting from Line of Sight (LoS)-dominated wireless channels. In order to exploit…
▽ More
Unmanned Aerial Vehicles (UAVs) have been extensively utilized to provide wireless connectivity in rural and under-developed areas, enhance network capacity and provide support for peaks or unexpected surges in user demand, mainly due to their fast deployment, cost-efficiency and superior communication performance resulting from Line of Sight (LoS)-dominated wireless channels. In order to exploit the benefits of UAVs as base stations or relays in a mobile network, a major challenge is to determine the optimal UAV placement and relocation strategy with respect to the mobility and traffic patterns of the ground network nodes. Moreover, considering that the UAVs form a multi-hop aerial network, capacity and connectivity constraints have significant impacts on the end-to-end network performance. To this end, we formulate the joint UAV placement and routing problem as a Mixed Integer Linear Program (MILP) and propose an approximation that leads to a LP rounding algorithm and achieves a balance between time-complexity and optimality.
△ Less
Submitted 30 September, 2020;
originally announced September 2020.
-
Trust-Aware Service Function Chain Embedding: A Path-Based Approach
Authors:
Nariman Torkzaban,
John S. Baras
Abstract:
With the emergence of network function virtualization (NFV), and software-defined networking (SDN), the realization and implementation of service function chains (SFCs) have become much easier. An SFC is an ordered set of interconnected virtual network functions (VNFs). NFV allows for decoupling the network functions from proprietary hardware realizing a software-based implementation of VNFs on co…
▽ More
With the emergence of network function virtualization (NFV), and software-defined networking (SDN), the realization and implementation of service function chains (SFCs) have become much easier. An SFC is an ordered set of interconnected virtual network functions (VNFs). NFV allows for decoupling the network functions from proprietary hardware realizing a software-based implementation of VNFs on commodity hardware and SDN decouples the network control from its forwarding logic allowing for a more flexible and programmable traffic routing among the VNFs. The SFC embedding problem (i.e. placement of SFCs on a shared substrate and establishing the corresponding traffic routes between the VNFs), has been extensively studied in the literature. In this paper, we extend a previous work on trust-aware service chain embedding with generalizing the role of trust by incorporating the trustworthiness of the service network links and substrate network paths into the SFC embedding decision process. We first introduce and formulate the path-based trust-aware service chain embedding problem as a mixed integer-linear program (MILP), and then provide an approximate model-based on selecting k-shortest candidate substrate paths for hosting each virtual link, to reduce the complexity of the model. We validate the performance of our methods through simulations and conduct a discussion on evaluating the methods and some operation trade-offs.
△ Less
Submitted 5 October, 2020; v1 submitted 15 September, 2020;
originally announced September 2020.
-
Joint Satellite Gateway Placement and Routing for Integrated Satellite-Terrestrial Networks
Authors:
Nariman Torkzaban,
Anousheh Gholami,
Chrysa Papagianni,
John S. Baras
Abstract:
With the increasing attention to the integrated satellite-terrestrial networks (ISTNs), the satellite gateway placement problem becomes of paramount importance. The resulting network performance may vary depending on the different design strategies. In this paper, a joint satellite gateway placement and routing strategy for the terrestrial network is proposed to minimize the overall cost of gatewa…
▽ More
With the increasing attention to the integrated satellite-terrestrial networks (ISTNs), the satellite gateway placement problem becomes of paramount importance. The resulting network performance may vary depending on the different design strategies. In this paper, a joint satellite gateway placement and routing strategy for the terrestrial network is proposed to minimize the overall cost of gateway deployment and traffic routing, while adhering to the average delay requirement for traffic demands. Although traffic routing and gateway placement can be solved independently, the dependence between the routing decisions for different demands makes it more realistic to solve an aggregated model instead. We develop a mixed-integer linear program (MILP) formulation for the problem. We relax the integrality constraints to achieve a linear program (LP) which reduces time-complexity at the expense of a sub-optimal solution. We further propose a variant of the proposed model to balance the load between the selected gateways.
△ Less
Submitted 5 October, 2020; v1 submitted 7 February, 2020;
originally announced February 2020.
