-
A Real-Time Millimeter Wave V2V Channel Sounder
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Saeed S. Ghassemzadeh,
Milap Majmundar,
Theodore S. Rappaport
Abstract:
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle…
▽ More
Wireless communication in millimeter wave spectrum is poised to provide the latency and bandwidth needed for advanced use cases unfeasible at lower frequencies. Despite the market potential of vehicular communication networks, investigations into the millimeter wave vehicular channel are lacking. In this paper, we present a detailed overview of a novel 1 GHz wide, multi-antenna vehicle to vehicle directional channel sounding and measurement platform operating at 28 GHz. The channel sounder uses two 256-element phased arrays at the transmitter vehicle and four 64-element arrays at the receiver vehicle, with the receiver measuring 116 different directional beams in less than 1 millisecond. By measuring the full multi-beam channel impulse response at large bandwidths, our system provides unprecedented insight in instantaneous mobile vehicle to vehicle channels. The system also uses centimeter-level global position tracking and 360 degree video capture to provide additional contextual information for joint communication and sensing applications. An initial measurement campaign was conducted on highway and surface streets in Austin, Texas. We show example data that highlights the sensing capability of the system. Preliminary results from the measurement campaign show that bumper mounted mmWave arrays provide rich scattering in traffic as well a provide significant directional diversity aiding towards high reliability vehicular communication. Additionally, potential waveguide effects from high traffic in lanes can also extend the range of mmWave signals significantly.
△ Less
Submitted 16 March, 2022;
originally announced March 2022.
-
Performance Impact Analysis of Beam Switching in Millimeter Wave Vehicular Communications
Authors:
O. Kanhere,
A. Chopra,
A. Thornburg,
T. S. Rappaport,
S. S. Ghassemzadeh
Abstract:
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measur…
▽ More
Millimeter wave wireless spectrum deployments will allow vehicular communications to share high data rate vehicular sensor data in real-time. The highly directional nature of wireless links in millimeter spectral bands will require continuous channel measurements to ensure the transmitter (TX) and receiver (RX) beams are aligned to provide the best channel. Using real-world vehicular mmWave measurement data at 28 GHz, we determine the optimal beam swee** period, i.e. the frequency of the channel measurements, to align the RX beams to the best channel directions for maximizing the vehicle-to-infrastructure (V2I) throughput. We show that in a realistic vehicular traffic environment in Austin, TX, for a vehicle traveling at an average speed of 10.5 mph, a beam swee** period of 300 ms in future V2I communication standards would maximize the V2I throughput, using a system of four RX phased arrays that scanned the channel 360 degrees in the azimuth and 30 degrees above and below the boresight. We also investigate the impact of the number of active RX chains controlling the steerable phased arrays on V2I throughput. Reducing the number of RX chains controlling the phased arrays helps reduce the cost of the vehicular mmWave hardware while multiple RX chains, although more expensive, provide more robustness to beam direction changes at the vehicle, allowing near maximum throughput over a wide range of beam sweep periods. We show that the overhead of utilizing one RX chain instead of four leads to a 10% drop in mean V2I throughput over six non-line-of-sight runs in real traffic conditions, with each run being 10 to 20 seconds long over a distance of 40 to 90 meters.
△ Less
Submitted 4 March, 2021;
originally announced March 2021.
-
Real-time Millimeter Wave Omnidirectional Channel Sounder Using Phased Array Antennas
Authors:
Aditya Chopra,
Andrew Thornburg,
Ojas Kanhere,
Abbas Termos,
Saeed S. Ghassemzadeh,
Theodore S. Rappaport
Abstract:
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 in…
▽ More
Characterization of the millimeter wave wireless channel is needed to facilitate fully connected vehicular communication in the future. To study the multipath-rich, rapidly varying nature of the vehicular propagation environment, fast millimeter wave channel sounders are required. We present a channel sounder design capable of covering 360 degrees in azimuth and 60 degrees in elevation with 200 individual beam directions in 6.25 ms by using four phased arrays simultaneously. The channel measurements are accompanied by high resolution positioning and video data, allowing channel sounding to be conducted while either the transmitter, or the receiver, or both are moving. Channel sounding campaigns were conducted at multiple urban locations with light traffic conditions in Austin, Texas. Preliminary results show that beam selection at the receiver can lower the effective pathloss exponent to 1.6 for line-of-sight and 2.25 for non line-of-sight.
△ Less
Submitted 23 September, 2020;
originally announced September 2020.
-
Performance Analysis of mmWave Ad Hoc Networks
Authors:
Andrew Thornburg,
Tianyang Bai,
Robert W. Heath Jr
Abstract:
Ad hoc networks provide an on-demand, infrastructure-free means to communicate between soldiers in war zones, aid workers in disaster areas, or consumers in device-to-device (D2D) applications. Unfortunately, ad hoc networks are limited by interference due to nearby transmissions. Millimeter-wave (mmWave) devices offer several potential advantages for ad hoc networks including reduced interference…
▽ More
Ad hoc networks provide an on-demand, infrastructure-free means to communicate between soldiers in war zones, aid workers in disaster areas, or consumers in device-to-device (D2D) applications. Unfortunately, ad hoc networks are limited by interference due to nearby transmissions. Millimeter-wave (mmWave) devices offer several potential advantages for ad hoc networks including reduced interference due to directional antennas and building blockages, not to mention huge bandwidth channels for large data rates.. This paper uses a stochastic geometry approach to characterize the one-way and two-way signal-to-interference ratio distribution of a mmWave ad hoc network with directional antennas, random blockages, and ALOHA channel access. The interference-to-noise ratio shows that a fundamental limitation of an ad hoc network, interference, may still be an issue. The performance of mmWave ad hoc networks is bounded by the transmission capacity and area spectral efficiency. The results show that mmWave networks can support much higher densities and larger spectral efficiencies, even in the presence of blockage, compared with lower frequency communication for certain link distances. Due to the increased bandwidth, the rate coverage of mmWave can be much greater than lower frequency devices.
△ Less
Submitted 2 February, 2016; v1 submitted 1 December, 2014;
originally announced December 2014.