-
Graph Attention Network Based Single-Pixel Compressive Direction of Arrival Estimation
Authors:
Kürşat Tekbıyık,
Okan Yurduseven,
Güneş Karabulut Kurt
Abstract:
In this paper, we present a single-pixel compressive direction of arrival (DoA) estimation technique leveraging a graph attention network (GAT)-based deep-learning framework. The physical layer compression is achieved using a coded-aperture technique, probing the spectrum of far-field sources that are incident on the aperture using a set of spatio-temporally incoherent modes. This information is t…
▽ More
In this paper, we present a single-pixel compressive direction of arrival (DoA) estimation technique leveraging a graph attention network (GAT)-based deep-learning framework. The physical layer compression is achieved using a coded-aperture technique, probing the spectrum of far-field sources that are incident on the aperture using a set of spatio-temporally incoherent modes. This information is then encoded and compressed into the channel of the coded-aperture. The coded-aperture is based on a metasurface antenna design and it works as a receiver, exhibiting a single-channel and replacing the conventional multichannel raster scan-based solutions for DoA estimation. The GAT network enables the compressive DoA estimation framework to learn the DoA information directly from the measurements acquired using the coded-aperture. This step eliminates the need for an additional reconstruction step and significantly simplifies the processing layer to achieve DoA estimation. We show that the presented GAT integrated single-pixel radar framework can retrieve high fidelity DoA information even under relatively low signal-to-noise ratio (SNR) levels.
△ Less
Submitted 1 November, 2021; v1 submitted 12 September, 2021;
originally announced September 2021.
-
Graph Attention Networks for Channel Estimation in RIS-assisted Satellite IoT Communications
Authors:
Kürşat Tekbıyık,
Güneş Karabulut Kurt,
Ali Rıza Ekti,
Halim Yanikomeroglu
Abstract:
Direct-to-satellite (DtS) communication has gained importance recently to support globally connected Internet of things (IoT) networks. However, relatively long distances of densely deployed satellite networks around the Earth cause a high path loss. In addition, since high complexity operations such as beamforming, tracking and equalization have to be performed in IoT devices partially, both the…
▽ More
Direct-to-satellite (DtS) communication has gained importance recently to support globally connected Internet of things (IoT) networks. However, relatively long distances of densely deployed satellite networks around the Earth cause a high path loss. In addition, since high complexity operations such as beamforming, tracking and equalization have to be performed in IoT devices partially, both the hardware complexity and the need for high-capacity batteries of IoT devices increase. The reconfigurable intelligent surfaces (RISs) have the potential to increase the energy-efficiency and to perform complex signal processing over the transmission environment instead of IoT devices. But, RISs need the information of the cascaded channel in order to change the phase of the incident signal. This study evaluates the pilot signal as a graph and incorporates this information into the graph attention networks (GATs) to track the phase relation through pilot signaling. The proposed GAT-based channel estimation method examines the performance of the DtS IoT networks for different RIS configurations to solve the challenging channel estimation problem. It is shown that the proposed GAT both demonstrates a higher performance with increased robustness under changing conditions and has lower computational complexity compared to conventional deep learning methods. Moreover, bit error rate performance is investigated for RIS designs with discrete and non-uniform phase shifts under channel estimation based on the proposed method. One of the findings in this study is that the channel models of the operating environment and the performance of the channel estimation method must be considered during RIS design to exploit performance improvement as far as possible.
△ Less
Submitted 23 July, 2022; v1 submitted 1 April, 2021;
originally announced April 2021.
-
Energy-Efficient RIS-Assisted Satellites for IoT Networks
Authors:
Kürşat Tekbıyık,
Güneş Karabulut Kurt,
Halim Yanikomeroglu
Abstract:
The use of satellites to provide ubiquitous coverage and connectivity for densely deployed Internet of Things (IoT) networks is expected to be a reality in emerging 6G networks. Yet the low battery capacity of IoT nodes constitutes a problem for their direct connectivity to satellites, which are located at altitudes of up to 2000 km. In this paper, we propose a novel architecture involving the use…
▽ More
The use of satellites to provide ubiquitous coverage and connectivity for densely deployed Internet of Things (IoT) networks is expected to be a reality in emerging 6G networks. Yet the low battery capacity of IoT nodes constitutes a problem for their direct connectivity to satellites, which are located at altitudes of up to 2000 km. In this paper, we propose a novel architecture involving the use of reconfigurable intelligent surface (RIS) units to mitigate the path loss associated with long transmission distances. These RIS units can be placed on satellite reflectarrays, and, when used in broadcasting and beamforming, they can provide significant gains in signal transmission. This study shows that RIS-assisted satellites can provide up to 10^5 times higher downlink and achievable uplink rates for IoT networks.
△ Less
Submitted 21 May, 2021; v1 submitted 18 January, 2021;
originally announced January 2021.
-
Reconfigurable Intelligent Surfaces in Action for Non-Terrestrial Networks
Authors:
Kürşat Tekbıyık,
Güneş Karabulut Kurt,
Ali Rıza Ekti,
Halim Yanikomeroglu
Abstract:
Next-generation communication technology will be made possible by cooperation between terrestrial networks with non-terrestrial networks (NTN) comprised of high-altitude platform stations and satellites. Further, as humanity embarks on the long road to establish new habitats on other planets, cooperation between NTN and deep-space networks (DSN) will be necessary. In this regard, we propose the us…
▽ More
Next-generation communication technology will be made possible by cooperation between terrestrial networks with non-terrestrial networks (NTN) comprised of high-altitude platform stations and satellites. Further, as humanity embarks on the long road to establish new habitats on other planets, cooperation between NTN and deep-space networks (DSN) will be necessary. In this regard, we propose the use of reconfigurable intelligent surfaces (RIS) to improve coordination between these networks given that RIS perfectly match the size, weight, and power restrictions of operating in space. A comprehensive framework of RIS-assisted non-terrestrial and interplanetary communications is presented that pinpoints challenges, use cases, and open issues. Furthermore, the performance of RIS-assisted NTN under environmental effects such as solar scintillation and satellite drag is discussed in light of simulation results.
△ Less
Submitted 22 April, 2022; v1 submitted 2 December, 2020;
originally announced December 2020.
-
Channel Estimation for Full-Duplex RIS-assisted HAPS Backhauling with Graph Attention Networks
Authors:
Kürşat Tekbıyık,
Güneş Karabulut Kurt,
Chongwen Huang,
Ali Rıza Ekti,
Halim Yanikomeroglu
Abstract:
In this paper, graph attention network (GAT) is firstly utilized for the channel estimation. In accordance with the 6G expectations, we consider a high-altitude platform station (HAPS) mounted reconfigurable intelligent surface-assisted two-way communications and obtain a low overhead and a high normalized mean square error performance. The performance of the proposed method is investigated on the…
▽ More
In this paper, graph attention network (GAT) is firstly utilized for the channel estimation. In accordance with the 6G expectations, we consider a high-altitude platform station (HAPS) mounted reconfigurable intelligent surface-assisted two-way communications and obtain a low overhead and a high normalized mean square error performance. The performance of the proposed method is investigated on the two-way backhauling link over the RIS-integrated HAPS. The simulation results denote that the GAT estimator overperforms the least square in full-duplex channel estimation. Contrary to the previously introduced methods, GAT at one of the nodes can separately estimate the cascaded channel coefficients. Thus, there is no need to use time-division duplex mode during pilot signaling in full-duplex communication. Moreover, it is shown that the GAT estimator is robust to hardware imperfections and changes in small-scale fading characteristics even if the training data do not include all these variations.
△ Less
Submitted 3 April, 2021; v1 submitted 22 October, 2020;
originally announced October 2020.
-
Reconfigurable Intelligent Surfaces Empowered THz Communication in LEO Satellite Networks
Authors:
Kürşat Tekbıyık,
Güneş Karabulut Kurt,
Ali Rıza Ekti,
Halim Yanikomeroglu
Abstract:
The revolution in the low Earth orbit (LEO) satellite networks will bring changes on their communication models and a shift from the classical bent-pipe architectures to more sophisticated networking platforms. Thanks to technological advancements in microelectronics and micro-systems, the terahertz (THz) band has emerged as a strong candidate for inter-satellite links (ISLs) due to its promise of…
▽ More
The revolution in the low Earth orbit (LEO) satellite networks will bring changes on their communication models and a shift from the classical bent-pipe architectures to more sophisticated networking platforms. Thanks to technological advancements in microelectronics and micro-systems, the terahertz (THz) band has emerged as a strong candidate for inter-satellite links (ISLs) due to its promise of high data rates. Yet, the propagation conditions of the THz band need to be properly modeled and controlled by utilizing reconfigurable intelligent surfaces (RISs) to leverage their full potential. In this work, we first provide an assessment of the use of the THz band for ISLs, and quantify the impact of misalignment fading on error performance. Then, in order to compensate for the high path loss associated with high carrier frequencies, and to further improve the signal-to-noise ratio (SNR), we propose the use of RISs mounted on neighboring satellites to enable signal propagation. Based on a mathematical analysis of the problem, we present the error rate expressions for RIS-assisted ISLs with misalignment fading. Also, numerical results show that RIS can leverage the error rate performance and achievable capacity of THz ISLs.
△ Less
Submitted 19 November, 2022; v1 submitted 8 July, 2020;
originally announced July 2020.
-
A Holistic Investigation on Terahertz Propagation and Channel Modeling Toward Vertical Heterogeneous Networks
Authors:
Kürşat Tekbıyık,
Ali Rıza Ekti,
Güneş Karabulut Kurt,
Ali Görçin,
Halim Yanıkömeroğlu
Abstract:
User-centric and low latency communications can be enabled not only by small cells but also through ubiquitous connectivity. Recently, the vertical heterogeneous network (V-HetNet) architecture is proposed to backhaul/fronthaul a large number of small cells. Like an orchestra, the V-HetNet is a polyphony of different communication ensembles, including geostationary orbit (GEO), and low-earth orbit…
▽ More
User-centric and low latency communications can be enabled not only by small cells but also through ubiquitous connectivity. Recently, the vertical heterogeneous network (V-HetNet) architecture is proposed to backhaul/fronthaul a large number of small cells. Like an orchestra, the V-HetNet is a polyphony of different communication ensembles, including geostationary orbit (GEO), and low-earth orbit (LEO) satellites (e.g., CubeSats), and networked flying platforms (NFPs) along with terrestrial communication links. In this study, we propose the Terahertz (THz) communications to enable the elements of V-HetNets to function in harmony. As THz links offer a large bandwidth, leading to ultra-high data rates, it is suitable for backhauling and fronthauling small cells. Furthermore, THz communications can support numerous applications from inter-satellite links to in-vivo nanonetworks. However, to savor this harmony, we need accurate channel models. In this paper, the insights obtained through our measurement campaigns are highlighted, to reveal the true potential of THz communications in V-HetNets.
△ Less
Submitted 15 September, 2020; v1 submitted 1 May, 2020;
originally announced May 2020.
-
Spectrum Sensing and Signal Identification with Deep Learning based on Spectral Correlation Function
Authors:
Kürşat Tekbıyık,
Özkan Akbunar,
Ali Rıza Ekti,
Ali Görçin,
Güneş Karabulut Kurt,
Khalid A. Qaraqe
Abstract:
Spectrum sensing is one of the means of utilizing the scarce source of wireless spectrum efficiently. In this paper, a convolutional neural network (CNN) model employing spectral correlation function which is an effective characterization of cyclostationarity property, is proposed for wireless spectrum sensing and signal identification. The proposed method classifies wireless signals without a pri…
▽ More
Spectrum sensing is one of the means of utilizing the scarce source of wireless spectrum efficiently. In this paper, a convolutional neural network (CNN) model employing spectral correlation function which is an effective characterization of cyclostationarity property, is proposed for wireless spectrum sensing and signal identification. The proposed method classifies wireless signals without a priori information and it is implemented in two different settings entitled CASE1 and CASE2. In CASE1, signals are jointly sensed and classified. In CASE2, sensing and classification are conducted in a sequential manner. In contrary to the classical spectrum sensing techniques, the proposed CNN method does not require a statistical decision process and does not need to know the distinct features of signals beforehand. Implementation of the method on the measured overthe-air real-world signals in cellular bands indicates important performance gains when compared to the signal classifying deep learning networks available in the literature and against classical sensing methods. Even though the implementation herein is over cellular signals, the proposed approach can be extended to the detection and classification of any signal that exhibits cyclostationary features. Finally, the measurement-based dataset which is utilized to validate the method is shared for the purposes of reproduction of the results and further research and development.
△ Less
Submitted 28 April, 2021; v1 submitted 17 March, 2020;
originally announced March 2020.
-
Robust and Fast Automatic Modulation Classification with CNN under Multipath Fading Channels
Authors:
Kürşat Tekbıyık,
Ali Rıza Ekti,
Ali Görçin,
Güneş Karabulut Kurt,
Cihat Keçeci
Abstract:
Automatic modulation classification (AMC) has been studied for more than a quarter of a century; however, it has been difficult to design a classifier that operates successfully under changing multipath fading conditions and other impairments. Recently, deep learning (DL)-based methods are adopted by AMC systems and major improvements are reported. In this paper, a novel convolutional neural netwo…
▽ More
Automatic modulation classification (AMC) has been studied for more than a quarter of a century; however, it has been difficult to design a classifier that operates successfully under changing multipath fading conditions and other impairments. Recently, deep learning (DL)-based methods are adopted by AMC systems and major improvements are reported. In this paper, a novel convolutional neural network (CNN) classifier model is proposed to classify modulation classes in terms of their families, i.e., types. The proposed classifier is robust against realistic wireless channel impairments and in relation to that when the data sets that are utilized for testing and evaluating the proposed methods are considered, it is seen that RadioML2016.10a is the main dataset utilized for testing and evaluation of the proposed methods. However, the channel effects incorporated in this dataset and some others may lack the appropriate modeling of the real-world conditions since it only considers two distributions for channel models for a single tap configuration. Therefore, in this paper, a more comprehensive dataset, named as HisarMod2019.1, is also introduced, considering real-life applicability. HisarMod2019.1 includes 26 modulation classes passing through the channels with 5 different fading types and several numbers of taps for classification. It is shown that the proposed model performs better than the existing models in terms of both accuracy and training time under more realistic conditions. Even more, surpassed their performance when the RadioML2016.10a dataset is utilized.
△ Less
Submitted 7 March, 2020; v1 submitted 12 November, 2019;
originally announced November 2019.