-
Massive MIMO Evolution Towards 3GPP Release 18
Authors:
Huang** **,
Kunpeng Liu,
Gilwon Lee,
Emad J. Farag,
Min Zhang,
Dalin Zhu,
Leiming Zhang,
Eko Onggosanusi,
Mansoor Shafi,
Harsh Tataria
Abstract:
Since the introduction of fifth-generation new radio (5G-NR) in Third Generation Partnership Project (3GPP) Release 15, swift progress has been made to evolve 5G with 3GPP Release 18 emerging. A critical aspect is the design of massive multiple-input multiple-output (MIMO) technology. In this line, this paper makes several important contributions: We provide a comprehensive overview of the evoluti…
▽ More
Since the introduction of fifth-generation new radio (5G-NR) in Third Generation Partnership Project (3GPP) Release 15, swift progress has been made to evolve 5G with 3GPP Release 18 emerging. A critical aspect is the design of massive multiple-input multiple-output (MIMO) technology. In this line, this paper makes several important contributions: We provide a comprehensive overview of the evolution of standardized massive MIMO features from 3GPP Release 15 to 17 for both time/frequency-division duplex operation across bands FR-1 and FR-2. We analyze the progress on channel state information (CSI) frameworks, beam management frameworks and present enhancements for uplink CSI. We shed light on emerging 3GPP Release 18 problems requiring imminent attention. These include advanced codebook design and sounding reference signal design for coherent joint transmission (CJT) with multiple transmission/reception points (multi- TRPs). We discuss advancements in uplink demodulation reference signal design, enhancements for mobility to provide accurate CSI estimates, and unified transmission configuration indicator framework tailored for FR-2 bands. For each concept, we provide system level simulation results to highlight their performance benefits. Via field trials in an outdoor environment at Shanghai Jiaotong University, we demonstrate the gains of multi-TRP CJT relative to single TRP at 3.7 GHz.
△ Less
Submitted 15 October, 2022;
originally announced October 2022.
-
RF Interference in Lens-Based Massive MIMO Systems -- An Application Note
Authors:
Harsh Tataria
Abstract:
We analyze the uplink radio frequency (RF) interference from a multiplicity of single-antenna user equipments transmitting to a cellular base station (BS) within the same time-frequency resource. The BS is assumed to operate with a lens antenna array, which induces additional focusing gain for the incoming signals. Considering line-of-sight propagation conditions, we characterize the multiuser RF…
▽ More
We analyze the uplink radio frequency (RF) interference from a multiplicity of single-antenna user equipments transmitting to a cellular base station (BS) within the same time-frequency resource. The BS is assumed to operate with a lens antenna array, which induces additional focusing gain for the incoming signals. Considering line-of-sight propagation conditions, we characterize the multiuser RF interference properties via approximation of the mainlobe interference as well as the effective interferer probability. The results derived in this application note are foundational to more general multiuser interference analysis across different propagation conditions, which we present in a follow up paper.
△ Less
Submitted 5 May, 2022;
originally announced May 2022.
-
A Review of Indoor Millimeter Wave Device-based Localization and Device-free Sensing Technologies and Applications
Authors:
Anish Shastri,
Neharika Valecha,
Enver Bashirov,
Harsh Tataria,
Michael Lentmaier,
Fredrik Tufvesson,
Michele Rossi,
Paolo Casari
Abstract:
The commercial availability of low-cost millimeter wave (mmWave) communication and radar devices is starting to improve the penetration of such technologies in consumer markets, paving the way for large-scale and dense deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the same time, pervasive mmWave access will enable device localization and device-free sensing with unprec…
▽ More
The commercial availability of low-cost millimeter wave (mmWave) communication and radar devices is starting to improve the penetration of such technologies in consumer markets, paving the way for large-scale and dense deployments in fifth-generation (5G)-and-beyond as well as 6G networks. At the same time, pervasive mmWave access will enable device localization and device-free sensing with unprecedented accuracy, especially with respect to sub-6 GHz commercial-grade devices. This paper surveys the state of the art in device-based localization and device-free sensing using mmWave communication and radar devices, with a focus on indoor deployments. We first overview key concepts about mmWave signal propagation and system design. Then, we provide a detailed account of approaches and algorithms for localization and sensing enabled by mmWaves. We consider several dimensions in our analysis, including the main objectives, techniques, and performance of each work, whether each research reached some degree of implementation, and which hardware platforms were used for this purpose. We conclude by discussing that better algorithms for consumer-grade devices, data fusion methods for dense deployments, as well as an educated application of machine learning methods are promising, relevant and timely research directions.
△ Less
Submitted 25 May, 2022; v1 submitted 10 December, 2021;
originally announced December 2021.
-
Sum Capacity Loss Quantification With Optimal and Sub-Optimal Precoding in Heterogeneous Multiuser Channels
Authors:
Harsh Tataria,
Mansoor Shafi,
Dino Pjanić
Abstract:
We analytically approximate the expected sum capacity loss between the optimal downlink precoding technique of dirty paper coding (DPC), and the sub-optimal technique of zero-forcing precoding, for multiuser channels. We also consider the most general case of multi-stream transmission to multiple users, where we evaluate the expected sum capacity loss between DPC and block diagonalization precodin…
▽ More
We analytically approximate the expected sum capacity loss between the optimal downlink precoding technique of dirty paper coding (DPC), and the sub-optimal technique of zero-forcing precoding, for multiuser channels. We also consider the most general case of multi-stream transmission to multiple users, where we evaluate the expected sum capacity loss between DPC and block diagonalization precoding. Unlike previously, assuming heterogeneous Ricean fading, we utilize the well known affine approximation to predict the expected sum capacity difference between both precoder types (optimal and sub-optimal) over a wide range of system and propagation parameters. Furthermore, for single-stream transmission, we consider the problem of weighted sum capacity maximization, where a similar quantification of the sum capacity difference between the two precoder types is presented. In doing so, we disclose that power allocation to different users proportional to their individual weights asymptotically maximizes the weighted sum capacity. Numerical simulations are presented to demonstrate the tightness of the developed expressions relative to their simulated counterparts.
△ Less
Submitted 19 November, 2021;
originally announced November 2021.
-
Six Critical Challenges for 6G Wireless Systems
Authors:
Harsh Tataria,
Mansoor Shafi,
Mischa Dohler,
Shu Sun
Abstract:
A large number of papers are now appearing on sixth-generation (6G) wireless systems, covering different aspects, ranging from vision, architecture, applications, and technology breakthroughs. With cellular systems in mind, this paper presents six critical, yet fundamental challenges that must be overcome before development and deployment of 6G systems. These include: Opening the sub-terahertz (su…
▽ More
A large number of papers are now appearing on sixth-generation (6G) wireless systems, covering different aspects, ranging from vision, architecture, applications, and technology breakthroughs. With cellular systems in mind, this paper presents six critical, yet fundamental challenges that must be overcome before development and deployment of 6G systems. These include: Opening the sub-terahertz (sub-THz) spectrum for increased bandwidths and the ability to utilize these bandwidths, pushing the limits of semiconductor technologies for operation within the sub-THz bands, transceiver design and architectures to realize the high peak data rates, and realizations of sub-millisecond latencies at the network-level to achieve the 6G key performance indicators. Additionally, since 6G systems will not be introduced in a green fields environment, backwards compatibility with existing systems is discussed. Where possible, we present practical solutions to realize the identified challenges.
△ Less
Submitted 16 November, 2021;
originally announced November 2021.
-
Learning-Based UE Classification in Millimeter-Wave Cellular Systems With Mobility
Authors:
Dino Pjanić,
Alexandros Sopasakis,
Harsh Tataria,
Fredrik Tufvesson,
Andres Reial
Abstract:
Millimeter-wave cellular communication requires beamforming procedures that enable alignment of the transmitter and receiver beams as the user equipment (UE) moves. For efficient beam tracking it is advantageous to classify users according to their traffic and mobility patterns. Research to date has demonstrated efficient ways of machine learning based UE classification. Although different machine…
▽ More
Millimeter-wave cellular communication requires beamforming procedures that enable alignment of the transmitter and receiver beams as the user equipment (UE) moves. For efficient beam tracking it is advantageous to classify users according to their traffic and mobility patterns. Research to date has demonstrated efficient ways of machine learning based UE classification. Although different machine learning approaches have shown success, most of them are based on physical layer attributes of the received signal. This, however, imposes additional complexity and requires access to those lower layer signals. In this paper, we show that traditional supervised and even unsupervised machine learning methods can successfully be applied on higher layer channel measurement reports in order to perform UE classification, thereby reducing the complexity of the classification process.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Simple Framework of ZF Precoding Analysis for Full-Dimensional Massive MIMO Systems
Authors:
Harsh Tataria,
Mansoor Shafi
Abstract:
We provide a simple, yet general and accurate framework for analyzing zero-forcing (ZF) precoding performance for a full-dimensional massive multiple-input multiple-output system. Exploiting an order two Neumann series, our framework approximates the expected (average) ZF signal-to-noise ratio and ergodic sum spectral efficiency, while catering for a finite multipath propagation model, as well as…
▽ More
We provide a simple, yet general and accurate framework for analyzing zero-forcing (ZF) precoding performance for a full-dimensional massive multiple-input multiple-output system. Exploiting an order two Neumann series, our framework approximates the expected (average) ZF signal-to-noise ratio and ergodic sum spectral efficiency, while catering for a finite multipath propagation model, as well as correlated and uncorrelated user equipment (UE) positions in both azimuth and elevation domains. The analysis provides clear insights on the influence of propagation and system parameters on ZF performance. We identify how far UEs must lie in azimuth and elevation for the ZF precoder to approach uncorrelated channels. Our framework is useful for predicting the ZF performance degradation arising from channel correlation. For optimal performance, UEs could be separated by around 30$^\circ$ in azimuth and 15$^\circ$ in elevation - conditions which are difficult to meet in reality.
△ Less
Submitted 1 August, 2021;
originally announced August 2021.
-
27.5-29.5 GHz Switched Array Sounder for Dynamic Channel Characterization: Design, Implementation and Measurements
Authors:
Harsh Tataria,
Erik L. Bengtsson,
Ove Edfors,
Fredrik Tufvesson
Abstract:
A pre-requisite for the design of wireless systems is the understanding of the propagation channel. While a wealth of propagation knowledge exists for bands below 6 GHz, the same can not be said for bands approaching millimeter-wave frequencies. In this paper, we present the design, implementation and measurement-based verification of a re-configurable 27.5-29.5 GHz channel sounder for measuring d…
▽ More
A pre-requisite for the design of wireless systems is the understanding of the propagation channel. While a wealth of propagation knowledge exists for bands below 6 GHz, the same can not be said for bands approaching millimeter-wave frequencies. In this paper, we present the design, implementation and measurement-based verification of a re-configurable 27.5-29.5 GHz channel sounder for measuring dynamic directional channels. Based on the switched array principle, our design is capable of characterizing 128$\times$256 dual-polarized channels with snapshot times of around 600 ms. This is in sharp contrast to measurement times on the order of tens-of-minutes with rotating horn antenna sounders. Our design lends itself to high angular resolution at both link ends with calibrated antenna arrays sampled at 2$^\circ$ and 5$^\circ$ intervals in the azimuth and elevation domains. This is complemented with a bandwidth of up to 2 GHz, enabling nanosecond-level delay resolution. The short measurement times and stable radio frequency design facilitates real-time processing and averaging of the received wavefronts to gain measurement signal-to-noise ratio and dynamic range. After disclosing the sounder design and implementation, we demonstrate its capabilities by presenting dynamic and static measurements at 28 GHz over a 1 GHz bandwidth in an office corridor environment.
△ Less
Submitted 22 May, 2021;
originally announced May 2021.
-
6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities
Authors:
Harsh Tataria,
Mansoor Shafi,
Andreas F. Molisch,
Mischa Dohler,
Henrik Sjöland,
Fredrik Tufvesson
Abstract:
Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published…
▽ More
Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.
△ Less
Submitted 18 March, 2021; v1 submitted 7 August, 2020;
originally announced August 2020.
-
A Light Signalling Approach to Node Grou** for Massive MIMO IoT Networks
Authors:
Emma Fitzgerald,
Michał Pióro,
Harsh Tataria,
Gilles Callebaut,
Sara Gunnarsson,
Liesbet Van der Perre
Abstract:
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state in…
▽ More
Massive MIMO is a leading technology to connect very large numbers of energy constrained nodes, as it offers both extensive spatial multiplexing and large array gain. A challenge resides in partitioning the many nodes into groups that can communicate simultaneously such that the mutual interference is minimized. We here propose node partitioning strategies that do not require full channel state information, but rather are based on nodes' respective directional channel properties. In our considered scenarios, these typically have a time constant that is far larger than the coherence time of the channel. We developed both an optimal and an approximation algorithm to partition users based on directional channel properties, and evaluated them numerically. Our results show that both algorithms, despite using only these directional channel properties, achieve similar performance in terms of the minimum signal-to-interference-plus-noise ratio for any user, compared with a reference method using full channel knowledge. In particular, we demonstrate that grou** nodes with related directional properties is to be avoided. We hence realise a simple partitioning method requiring minimal information to be collected from the nodes, and where this information typically remains stable over a long term, thus promoting their autonomy and energy efficiency.
△ Less
Submitted 16 June, 2022; v1 submitted 11 May, 2020;
originally announced May 2020.
-
Real-Time Implementation Aspects of Large Intelligent Surfaces
Authors:
Harsh Tataria,
Fredrik Tufvesson,
Ove Edfors
Abstract:
With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundam…
▽ More
With the potential to provide a clean break from massive multiple-input multiple-output, large intelligent surfaces (LISs) have recently received a thrust of research interest. Various proposals have been made in the literature to define the exact functionality of LISs, ranging from fully active to largely passive solutions. Nevertheless, almost all studies in the literature investigate the fundamental spectral efficiency performance of these architectures. In stark contrast, this paper investigates the implementation aspects of LISs. Using the fully active LIS as the basis of our exposition, we first present a rigorous discussion on the relative merits and disadvantages of possible implementation architectures from a radio-frequency circuits and real-time processing viewpoints. We then show that a distributed architecture based on a common module interfacing a smaller number of antennas can be scalable. To avoid severe losses with analog signal distribution, multiple common modules can be interconnected via a digital nearest-neighbor network. Furthermore, we show that with such a design, the maximum backplane throughput scales with the number of served user terminals, instead of the number of antennas across the surface. The discussions in the paper can serve as a guideline toward the real-time design and development of LISs.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Impact of Spatially Consistent Channels on Digital Beamforming for Millimeter-Wave Systems
Authors:
Harsh Tataria,
Fredrik Tufvesson
Abstract:
The premise of massive multiple-input multiple-output (MIMO) is based around coherent transmission and detection. Majority of the vast literature on massive MIMO presents performance evaluations over simplified statistical propagation models. All such models are drop-based and do not ensure continuity of channel parameters. In this paper, we quantify the impact of spatially consistent (SC) models…
▽ More
The premise of massive multiple-input multiple-output (MIMO) is based around coherent transmission and detection. Majority of the vast literature on massive MIMO presents performance evaluations over simplified statistical propagation models. All such models are drop-based and do not ensure continuity of channel parameters. In this paper, we quantify the impact of spatially consistent (SC) models on beamforming for massive MIMO systems. We focus on the downlink of a 28GHz multiuser urban microcellular scenario. Using the recently standardized Third Generation Partnership Project 38.901 SC-I procedure, we evaluate the signal-to-interference-plus-noise ratio of a user equipment and the system ergodic sum spectral efficiency with zero-forcing, block diagonalization, and signal-to-leakage-plus-noise ratio beamforming. Our results disclose that at practical signal-to-noise ratio levels, SC channels yield a significant performance loss relative to the case without SC due to substantial spatial correlation across the channel parameters.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Massive MIMO Asymptotics for Ray-Based Propagation Channels
Authors:
Shuang Li,
Peter Smith,
Pawel Dmochowski,
Harsh Tataria,
Michail Matthaiou,
**gwei Yin
Abstract:
Favorable propagation (FP) and channel hardening (CH) are desired properties in massive multiple-input multiple-output (MIMO) systems. To date, these properties have primarily been analyzed for classical \textit{statistical} channel models, or \textit{ray-based} models with very specific angular parameters and distributions. This paper presents a thorough mathematical analysis of the asymptotic sy…
▽ More
Favorable propagation (FP) and channel hardening (CH) are desired properties in massive multiple-input multiple-output (MIMO) systems. To date, these properties have primarily been analyzed for classical \textit{statistical} channel models, or \textit{ray-based} models with very specific angular parameters and distributions. This paper presents a thorough mathematical analysis of the asymptotic system behavior for ray-based channels with \textit{arbitrary} ray distributions, and considers \textit{two} types of antenna array structures at the cellular base station: a uniform linear array (ULA) and a uniform planar array (UPA). In addition to FP and channel hardening, we analyze the \textit{large system potential} (LSP) which measures the asymptotic ratio of the expected power in the desired channel to the expected total interference power when both the antenna and user numbers grow. LSP is said to hold when this ratio converges to a positive constant. The results demonstrate that while FP is guaranteed in ray-based channels, CH may or may not occur depending on the nature of the model. Furthermore, we demonstrate that LSP will not normally hold as the expected interference power grows logarithmically for both ULAs and UPAs relative to the power in the desired channel as the system size increases. Nevertheless, we identify some fundamental and attractive properties of massive MIMO in this limiting regime.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Amplitude and Phase Estimation for Absolute Calibration of Massive MIMO Front-Ends
Authors:
Guoda Tian,
Harsh Tataria,
Fredrik Tufvesson
Abstract:
Massive multiple-input multiple-output (MIMO) promises significantly higher performance relative to conventional multiuser systems. However, the promised gains of massive MIMO systems rely heavily on the accuracy of the absolute front-end calibration, as well as quality of channel estimates at the base station (BS). In this paper, we analyze user equipment-aided calibration mechanism to estimate t…
▽ More
Massive multiple-input multiple-output (MIMO) promises significantly higher performance relative to conventional multiuser systems. However, the promised gains of massive MIMO systems rely heavily on the accuracy of the absolute front-end calibration, as well as quality of channel estimates at the base station (BS). In this paper, we analyze user equipment-aided calibration mechanism to estimate the amplitude scaling and phase drift at each radio-frequency chain interfacing with the BS array. Assuming a uniform linear array at the BS and Ricean fading, we obtain the estimation parameters with moment-based (amplitude, phase) and maximum-likelihood (phase-only) estimation techniques. In stark contrast to previous works, we mathematically articulate the equivalence of the two approaches for phase estimation. Furthermore, we rigorously derive a Cramer-Rao lower bound to characterize the accuracy of the two estimators. Via numerical simulations, we evaluate the estimator performance with varying dominant line-of-sight powers, dominant angles-of-arrival, and signal-to-noise ratios.
△ Less
Submitted 25 February, 2020;
originally announced February 2020.
-
Real-Time Deployment Aspects of C-Band and Millimeter-Wave 5G-NR Systems
Authors:
Mansoor Shafi,
Harsh Tataria,
Andreas F. Molisch,
Fredrik Tufvesson,
Geoff Tunnicliffe
Abstract:
Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences…
▽ More
Fifth-generation (5G) new radio (NR) deployments are being rolled out in both the C-band (3.3 - 5.0 GHz) and millimeter-wave (mmWave) band (24.5 - 29.5 GHz). For outdoor scenarios, the C-band is expected to provide wide area coverage and throughput uniformity, whereas the mmWave band is expected to provide ultra-high throughput to dedicated areas within the C-band coverage. Due to the differences in the frequency bands, both systems are expected to be designed with different transmit and receive parameters, naturally resulting in performance variations proportional to the chosen parameters. Unlike many previous works, this paper presents measurement evaluations in central Auckland, New Zealand, from a pre-commercial deployment of a single-user, single-cell 5G-NR system operating in both bands. The net throughput, coverage reliability, and channel rank are analyzed across the two bands with baseband and analog beamforming. Our results show that the C-band coverage is considerably better than mmWave, with a consistently higher channel rank. Furthermore, the spatial stationarity region (SSR) for the azimuth angles-of-departure (AODs) is characterized, and a model derived from the measured beam identities is presented. The SSR of azimuth AODs is seen to closely follow a gamma distribution.
△ Less
Submitted 31 January, 2020;
originally announced January 2020.
-
Channel Correlation Diversity in MU-MIMO Systems -- Analysis and Measurements
Authors:
Harsh Tataria,
Seun Sangodoyin,
Andreas F. Molisch,
Peter J. Smith,
Michail Matthaiou,
Jianzhong Zhang,
Reiner S. Thomä
Abstract:
In multiuser multiple-input multiple-output (MU-MIMO) systems, channel correlation is detrimental to system performance. We demonstrate that widely used, yet overly simplified, correlation models that generate identical correlation profiles for each terminal tend to severely underestimate the system performance. In sharp contrast, more physically motivated models that capture variations in the pow…
▽ More
In multiuser multiple-input multiple-output (MU-MIMO) systems, channel correlation is detrimental to system performance. We demonstrate that widely used, yet overly simplified, correlation models that generate identical correlation profiles for each terminal tend to severely underestimate the system performance. In sharp contrast, more physically motivated models that capture variations in the power angular spectra across multiple terminals, generate diverse correlation patterns. This has a significant impact on the system performance. Assuming correlated Rayleigh fading and downlink zero-forcing precoding, tight closed-form approximations for the average signal-to-noise-ratio, and ergodic sum spectral efficiency are derived. Our expressions provide clear insights into the impact of diverse correlation patterns on the above performance metrics. Unlike previous works, the correlation models are parameterized with measured data from a recent 2.53 GHz urban macrocellular campaign in Cologne, Germany. Overall, results from this paper can be treated as a timely re-calibration of performance expectations from practical MU-MIMO systems.
△ Less
Submitted 1 July, 2019; v1 submitted 16 April, 2019;
originally announced April 2019.
-
Impact of Line-of-Sight and Unequal Spatial Correlation on Uplink MU-MIMO Systems
Authors:
Harsh Tataria,
Peter J. Smith,
Larry J. Greenstein,
Pawel A. Dmochowski,
Michail Matthaiou
Abstract:
Closed-form approximations of the expected per-terminal signal-to-interference-plus-noise-ratio (SINR) and ergodic sum spectral efficiency of a multiuser multiple-input multiple-output system are presented. Our analysis assumes spatially correlated Ricean fading channels with maximum-ratio combining on the uplink. Unlike previous studies, our model accounts for the presence of unequal correlation…
▽ More
Closed-form approximations of the expected per-terminal signal-to-interference-plus-noise-ratio (SINR) and ergodic sum spectral efficiency of a multiuser multiple-input multiple-output system are presented. Our analysis assumes spatially correlated Ricean fading channels with maximum-ratio combining on the uplink. Unlike previous studies, our model accounts for the presence of unequal correlation matrices, unequal Rice factors, as well as unequal link gains to each terminal. The derived approximations lend themselves to useful insights, special cases and demonstrate the aggregate impact of line-of-sight (LoS) and unequal correlation matrices. Numerical results show that while unequal correlation matrices enhance the expected SINR and ergodic sum spectral efficiency, the presence of strong LoS has an opposite effect. Our approximations are general and remain insensitive to changes in the system dimensions, signal-to-noise-ratios, LoS levels and unequal correlation levels.
△ Less
Submitted 4 August, 2017;
originally announced August 2017.
-
Uplink Analysis of Large MU-MIMO Systems With Space-Constrained Arrays in Ricean Fading
Authors:
Harsh Tataria,
Peter J. Smith,
Michail Matthaiou,
Pawel A. Dmochowski
Abstract:
Closed-form approximations to the expected per-terminal signal-to-interference-plus-noise-ratio (SINR) and ergodic sum spectral efficiency of a large multiuser multiple-input multiple-output system are presented. Our analysis assumes correlated Ricean fading with maximum ratio combining on the uplink, where the base station (BS) is equipped with a uniform linear array (ULA) with physical size rest…
▽ More
Closed-form approximations to the expected per-terminal signal-to-interference-plus-noise-ratio (SINR) and ergodic sum spectral efficiency of a large multiuser multiple-input multiple-output system are presented. Our analysis assumes correlated Ricean fading with maximum ratio combining on the uplink, where the base station (BS) is equipped with a uniform linear array (ULA) with physical size restrictions. Unlike previous studies, our model caters for the presence of unequal correlation matrices and unequal Rice factors for each terminal. As the number of BS antennas grows without bound, with a finite number of terminals, we derive the limiting expected per-terminal SINR and ergodic sum spectral efficiency of the system. Our findings suggest that with restrictions on the size of the ULA, the expected SINR saturates with increasing operating signal-to-noise-ratio (SNR) and BS antennas. Whilst unequal correlation matrices result in higher performance, the presence of strong line-of-sight (LoS) has an opposite effect. Our analysis accommodates changes in system dimensions, SNR, LoS levels, spatial correlation levels and variations in fixed physical spacings of the BS array.
△ Less
Submitted 10 May, 2017;
originally announced May 2017.
-
Coordinated Two-Tier Heterogeneous Cellular Networks with Leakage Based Beamforming
Authors:
Harsh Tataria,
Mansoor Shafi,
Peter J. Smith,
Pawel A. Dmochowski
Abstract:
In this paper we demonstrate the rate gains achieved by two-tier heterogeneous cellular networks (HetNets) with varying degrees of coordination between macrocell and microcell base stations (BSs). We show that without the presence of coordination, network densification does not provide any gain in the sum rate and rapidly decreases the mean per-user signal-to-interference-plus-noise-ratio (SINR).…
▽ More
In this paper we demonstrate the rate gains achieved by two-tier heterogeneous cellular networks (HetNets) with varying degrees of coordination between macrocell and microcell base stations (BSs). We show that without the presence of coordination, network densification does not provide any gain in the sum rate and rapidly decreases the mean per-user signal-to-interference-plus-noise-ratio (SINR). Our results show that coordination reduces the rate of SINR decay with increasing numbers of microcell BSs in the system. Validity of the analytically approximated mean per-user SINR over a wide range of signal-to-noise-ratio (SNR) is demonstrated via comparison with the simulated results.
△ Less
Submitted 5 March, 2015;
originally announced March 2015.
