Showing 1–8 of 8 results for author: Talla, V

Simplifying Backscatter Deployment: Full-Duplex LoRa Backscatter

Authors: Mohamad Katanbaf, Anthony Weinand, Vamsi Talla

Abstract: Due to the practical challenges in the deployment of existing half-duplex systems, the promise of ubiquitous backscatter connectivity has eluded us. To address this, we design the first long-range full-duplex LoRa backscatter reader. We leverage existing LoRa chipsets as transceivers and use a microcontroller in combination with inexpensive passive elements including a hybrid coupler, inductors, t… ▽ More Due to the practical challenges in the deployment of existing half-duplex systems, the promise of ubiquitous backscatter connectivity has eluded us. To address this, we design the first long-range full-duplex LoRa backscatter reader. We leverage existing LoRa chipsets as transceivers and use a microcontroller in combination with inexpensive passive elements including a hybrid coupler, inductors, tunable capacitors, and resistors to achieve 78 dB of self-interference cancellation and build a low-cost, long-range, and small-form-factor Full-Duplex LoRa Backscatter reader. We evaluate our system in various deployments and show that we can successfully communicate with a backscatter tag at distances of up to 300 ft in line of sight, and through obstacles, such as walls and cubicles, in a 4,000 ft$^2$ office area. We reconfigure our reader to conform to the size and power requirements of a smartphone, and demonstrate communication with a contact-lens-form-factor prototype device. Finally, we attach our reader to a drone and demonstrate backscatter sensing for precision agriculture with an instantaneous coverage of 7,850 ft$^2$. △ Less

Submitted 8 November, 2020; originally announced November 2020.

Comments: This article has been accepted for publication in 18th USENIX Symposium on Networked Systems Design and Implementation (NSDI '21)

Advances and Open Problems in Backscatter Networking

Authors: Vamsi Talla, Joshua Smith, Shyamnath Gollakota

Abstract: Despite significant research in backscatter communication over the past decade, key technical open problems remain under-explored. Here, we first systematically lay out the design space for backscatter networking and identify applications that make backscatter an attractive communication primitive. We then identify 10 research problems that remain to be solved in backscatter networking. These open… ▽ More Despite significant research in backscatter communication over the past decade, key technical open problems remain under-explored. Here, we first systematically lay out the design space for backscatter networking and identify applications that make backscatter an attractive communication primitive. We then identify 10 research problems that remain to be solved in backscatter networking. These open problems span across the network stack to include circuits, embedded systems, physical layer, MAC and network protocols as well as applications. We believe that addressing these problems can help deliver on backscatter's promise of low-power ubiquitous connectivity. △ Less

Submitted 6 November, 2020; originally announced November 2020.

Comments: To appear in ACM GetMobile

Wireless Quantization Index Modulation: Enabling Communication Through Existing Signals

Authors: Zerina Kapetanovic, Vamsi Talla, Aaron Parks, **g Qian, Joshua R. Smith

Abstract: As the number of IoT devices continue to exponentially increase and saturate the wireless spectrum, there is a dire need for additional spectrum to support large networks of wireless devices. Over the past years, many promising solutions have been proposed but they all suffer from the drawback of new infrastructure costs, setup and maintenance, or are difficult to implement due to FCC regulations.… ▽ More As the number of IoT devices continue to exponentially increase and saturate the wireless spectrum, there is a dire need for additional spectrum to support large networks of wireless devices. Over the past years, many promising solutions have been proposed but they all suffer from the drawback of new infrastructure costs, setup and maintenance, or are difficult to implement due to FCC regulations. In this paper, we propose a novel Wireless Quantization Index Modulation (QIM) technique which uses existing infrastructure to embed information into existing wireless signals to communicate with IoT devices with negligible impact on the original signal and zero spectrum overhead. We explore the design space for wireless QIM and evaluate the performance of embedding information in TV, FM and AM radio broadcast signals under different conditions. We demonstrate that we can embed messages at up to 8-200~kbps with negligible impact on the audio and video quality of the original FM, AM and TV signals respectively. △ Less

Submitted 24 April, 2018; originally announced April 2018.

Comments: 8 pages, IEEE RFID

Ultra-low-power Wireless Streaming Cameras

Authors: Saman Naderiparizi, Mehrdad Hessar, Vamsi Talla, Shyamnath Gollakota, Joshua R. Smith

Abstract: Wireless video streaming has traditionally been considered an extremely power-hungry operation. Existing approaches optimize the camera and communication modules individually to minimize their power consumption. However, the joint redesign and optimization of wireless communication as well as the camera is what that provides more power saving. We present an ultra-low-power wireless video streaming… ▽ More Wireless video streaming has traditionally been considered an extremely power-hungry operation. Existing approaches optimize the camera and communication modules individually to minimize their power consumption. However, the joint redesign and optimization of wireless communication as well as the camera is what that provides more power saving. We present an ultra-low-power wireless video streaming camera. To achieve this, we present a novel "analog" video backscatter technique that feeds analog pixels from the photo-diodes directly to the backscatter hardware, thereby eliminating power consuming hardware components such as ADCs and amplifiers. We prototype our wireless camera using off-the-shelf hardware and show that our design can stream video at up to 13 FPS and can operate up to a distance of 150 feet from the access point. Our COTS prototype consumes 2.36mW. Finally, to demonstrate the potential of our design, we built two proof-of-concept applications: video streaming for micro-robots and security cameras for face detection. △ Less

Submitted 27 July, 2017; originally announced July 2017.

Comments: 9 pages, 11 figures

LoRa Backscatter: Enabling The Vision of Ubiquitous Connectivity

Authors: Vamsi Talla, Mehrdad Hessar, Bryce Kellogg, Ali Najafi, Joshua R. Smith, Shyamnath Gollakota

Abstract: The vision of embedding connectivity into billions of everyday objects runs into the reality of existing communication technologies --- there is no existing wireless technology that can provide reliable and long-range communication at tens of microwatts of power as well as cost less than a dime. While backscatter is low-power and low-cost, it is known to be limited to short ranges. This paper over… ▽ More The vision of embedding connectivity into billions of everyday objects runs into the reality of existing communication technologies --- there is no existing wireless technology that can provide reliable and long-range communication at tens of microwatts of power as well as cost less than a dime. While backscatter is low-power and low-cost, it is known to be limited to short ranges. This paper overturns this conventional wisdom about backscatter and presents the first wide-area backscatter system. Our design can successfully backscatter from any location between an RF source and receiver, separated by 475 m, while being compatible with commodity LoRa hardware. Further, when our backscatter device is co-located with the RF source, the receiver can be as far as 2.8 km away. We deploy our system in a 4,800 $ft^{2}$ (446 $m^{2}$) house spread across three floors, a 13,024 $ft^{2}$ (1210 $m^{2}$) office area covering 41 rooms, as well as a one-acre (4046 $m^{2}$) vegetable farm and show that we can achieve reliable coverage, using only a single RF source and receiver. We also build a contact lens prototype as well as a flexible epidermal patch device attached to the human skin. We show that these devices can reliably backscatter data across a 3,328 $ft^{2}$ (309 $m^{2}$) room. Finally, we present a design sketch of a LoRa backscatter IC that shows that it costs less than a dime at scale and consumes only 9.25 $μ$W of power, which is more than 1000x lower power than LoRa radio chipsets. △ Less

Submitted 16 May, 2017; originally announced May 2017.

FM Backscatter: Enabling Connected Cities and Smart Fabrics

Authors: Anran Wang, Vikram Iyer, Vamsi Talla, Joshua R. Smith, Shyamnath Gollakota

Abstract: This paper enables connectivity on everyday objects by transforming them into FM radio stations. To do this, we show for the first time that ambient FM radio signals can be used as a signal source for backscatter communication. Our design creates backscatter transmissions that can be decoded on any FM receiver including those in cars and smartphones. This enables us to achieve a previously infeasi… ▽ More This paper enables connectivity on everyday objects by transforming them into FM radio stations. To do this, we show for the first time that ambient FM radio signals can be used as a signal source for backscatter communication. Our design creates backscatter transmissions that can be decoded on any FM receiver including those in cars and smartphones. This enables us to achieve a previously infeasible capability: backscattering information to cars and smartphones in outdoor environments. Our key innovation is a modulation technique that transforms backscatter, which is a multiplication operation on RF signals, into an addition operation on the audio signals output by FM receivers. This enables us to embed both digital data as well as arbitrary audio into ambient analog FM radio signals. We build prototype hardware of our design and successfully embed audio transmissions over ambient FM signals. Further, we achieve data rates of up to 3.2 kbps and ranges of 5-60 feet, while consuming as little as 11.07μW of power. To demonstrate the potential of our design, we also fabricate our prototype on a cotton t-shirt by machine sewing patterns of a conductive thread to create a smart fabric that can transmit data to a smartphone. We also embed FM antennas into posters and billboards and show that they can communicate with FM receivers in cars and smartphones. △ Less

Submitted 24 February, 2017; v1 submitted 22 February, 2017; originally announced February 2017.

Comments: NSDI 2017

Inter-Technology Backscatter: Towards Internet Connectivity for Implanted Devices

Authors: Vikram Iyer, Vamsi Talla, Bryce Kellogg, Shyamnath Gollakota, Joshua R. Smith

Abstract: We introduce inter-technology backscatter, a novel approach that transforms wireless transmissions from one technology to another, on the air. Specifically, we show for the first time that Bluetooth transmissions can be used to create Wi-Fi and ZigBee-compatible signals using backscatter communication. Since Bluetooth, Wi-Fi and ZigBee radios are widely available, this approach enables a backscatt… ▽ More We introduce inter-technology backscatter, a novel approach that transforms wireless transmissions from one technology to another, on the air. Specifically, we show for the first time that Bluetooth transmissions can be used to create Wi-Fi and ZigBee-compatible signals using backscatter communication. Since Bluetooth, Wi-Fi and ZigBee radios are widely available, this approach enables a backscatter design that works using only commodity devices. We build prototype backscatter hardware using an FPGA and experiment with various Wi-Fi, Bluetooth and ZigBee devices. Our experiments show we can create 2-11 Mbps Wi-Fi standards-compliant signals by backscattering Bluetooth transmissions. To show the generality of our approach, we also demonstrate generation of standards-complaint ZigBee signals by backscattering Bluetooth transmissions. Finally, we build proof-of-concepts for previously infeasible applications including the first contact lens form-factor antenna prototype and an implantable neural recording interface that communicate directly with commodity devices such as smartphones and watches, thus enabling the vision of Internet connected implanted devices. △ Less

Submitted 15 July, 2016; originally announced July 2016.

Powering the Next Billion Devices with Wi-Fi

Authors: Vamsi Talla, Bryce Kellogg, Benjamin Ransford, Saman Naderiparizi, Shyamnath Gollakota, Joshua R. Smith

Abstract: We present the first power over Wi-Fi system that delivers power and works with existing Wi-Fi chipsets. Specifically, we show that a ubiquitous piece of wireless communication infrastructure, the Wi-Fi router, can provide far field wireless power without compromising the network's communication performance. Building on our design we prototype, for the first time, battery-free temperature and came… ▽ More We present the first power over Wi-Fi system that delivers power and works with existing Wi-Fi chipsets. Specifically, we show that a ubiquitous piece of wireless communication infrastructure, the Wi-Fi router, can provide far field wireless power without compromising the network's communication performance. Building on our design we prototype, for the first time, battery-free temperature and camera sensors that are powered using Wi-Fi chipsets with ranges of 20 and 17 feet respectively. We also demonstrate the ability to wirelessly recharge nickel-metal hydride and lithium-ion coin-cell batteries at distances of up to 28 feet. Finally, we deploy our system in six homes in a metropolitan area and show that our design can successfully deliver power via Wi-Fi in real-world network conditions. △ Less

Submitted 26 May, 2015; originally announced May 2015.