Showing 1–10 of 10 results for author: Suda, S

An Improved Lower Bound on Oblivious Transfer Capacity via Interactive Erasure Emulation

Authors: So Suda, Shun Watanabe, Haruya Yamaguchi

Abstract: We revisit the oblivious transfer (OT) capacities of noisy channels against the passive adversary, which have been identified only for a limited class of channels. In the literature, the general construction of oblivious transfer has been known only for generalized erasure channels (GECs); for other channels, we first convert a given channel to a GEC via alphabet extension and erasure emulation, a… ▽ More We revisit the oblivious transfer (OT) capacities of noisy channels against the passive adversary, which have been identified only for a limited class of channels. In the literature, the general construction of oblivious transfer has been known only for generalized erasure channels (GECs); for other channels, we first convert a given channel to a GEC via alphabet extension and erasure emulation, and then apply the general construction for GEC. In this paper, we derive an improved lower bound on the OT capacity of the binary symmetric channel (BSC) and binary symmetric erasure channel (BSEC) by proposing a new protocol; by using interactive communication between the sender and the receiver, our protocol emulates erasure events recursively in multiple rounds. We also discuss a potential necessity of multiple rounds interactive communication to attain the OT capacity. △ Less

Submitted 26 January, 2024; originally announced January 2024.

Comments: 6 pages, 2 figures

ASAP: Automated Sequence Planning for Complex Robotic Assembly with Physical Feasibility

Authors: Yunsheng Tian, Karl D. D. Willis, Bassel Al Omari, Jieliang Luo, **chuan Ma, Yichen Li, Farhad Javid, Edward Gu, Joshua Jacob, Shinjiro Sueda, Hui Li, Sachin Chitta, Wojciech Matusik

Abstract: The automated assembly of complex products requires a system that can automatically plan a physically feasible sequence of actions for assembling many parts together. In this paper, we present ASAP, a physics-based planning approach for automatically generating such a sequence for general-shaped assemblies. ASAP accounts for gravity to design a sequence where each sub-assembly is physically stable… ▽ More The automated assembly of complex products requires a system that can automatically plan a physically feasible sequence of actions for assembling many parts together. In this paper, we present ASAP, a physics-based planning approach for automatically generating such a sequence for general-shaped assemblies. ASAP accounts for gravity to design a sequence where each sub-assembly is physically stable with a limited number of parts being held and a support surface. We apply efficient tree search algorithms to reduce the combinatorial complexity of determining such an assembly sequence. The search can be guided by either geometric heuristics or graph neural networks trained on data with simulation labels. Finally, we show the superior performance of ASAP at generating physically realistic assembly sequence plans on a large dataset of hundreds of complex product assemblies. We further demonstrate the applicability of ASAP on both simulation and real-world robotic setups. Project website: asap.csail.mit.edu △ Less

Submitted 29 February, 2024; v1 submitted 28 September, 2023; originally announced September 2023.

Comments: ICRA 2024

Assemble Them All: Physics-Based Planning for Generalizable Assembly by Disassembly

Authors: Yunsheng Tian, Jie Xu, Yichen Li, Jieliang Luo, Shinjiro Sueda, Hui Li, Karl D. D. Willis, Wojciech Matusik

Abstract: Assembly planning is the core of automating product assembly, maintenance, and recycling for modern industrial manufacturing. Despite its importance and long history of research, planning for mechanical assemblies when given the final assembled state remains a challenging problem. This is due to the complexity of dealing with arbitrary 3D shapes and the highly constrained motion required for real-… ▽ More Assembly planning is the core of automating product assembly, maintenance, and recycling for modern industrial manufacturing. Despite its importance and long history of research, planning for mechanical assemblies when given the final assembled state remains a challenging problem. This is due to the complexity of dealing with arbitrary 3D shapes and the highly constrained motion required for real-world assemblies. In this work, we propose a novel method to efficiently plan physically plausible assembly motion and sequences for real-world assemblies. Our method leverages the assembly-by-disassembly principle and physics-based simulation to efficiently explore a reduced search space. To evaluate the generality of our method, we define a large-scale dataset consisting of thousands of physically valid industrial assemblies with a variety of assembly motions required. Our experiments on this new benchmark demonstrate we achieve a state-of-the-art success rate and the highest computational efficiency compared to other baseline algorithms. Our method also generalizes to rotational assemblies (e.g., screws and puzzles) and solves 80-part assemblies within several minutes. △ Less

Submitted 7 November, 2022; originally announced November 2022.

Comments: Accepted by SIGGRAPH Asia 2022. Project website: http://assembly.csail.mit.edu/

Multi-Agent Path Planning with Asymmetric Interactions In Tight Spaces

Authors: Vismay Modi, Yixin Chen, Abhishek Madan, Shinjiro Sueda, David I. W. Levin

Abstract: By starting with the assumption that motion is fundamentally a decision making problem, we use the world-line concept from Special Relativity as the inspiration for a novel multi-agent path planning method. We have identified a particular set of problems that have so far been overlooked by previous works. We present our solution for the global path planning problem for each agent and ensure smooth… ▽ More By starting with the assumption that motion is fundamentally a decision making problem, we use the world-line concept from Special Relativity as the inspiration for a novel multi-agent path planning method. We have identified a particular set of problems that have so far been overlooked by previous works. We present our solution for the global path planning problem for each agent and ensure smooth local collision avoidance for each pair of agents in the scene. We accomplish this by modeling the trajectories of the agents through 2D space and time as curves in 3D. Global path planning is solved using a modified Djikstra's algorithm to ensure that initial trajectories for agents do not intersect. We then solve for smooth local trajectories using a quasi-Newton interior point solver, providing the trajectory curves with a radius to turn them into rods. Subsequently, resolving collision of the rods ensures that no two agents are in the same spatial position at the same time. This space-time formulation allows us to simulate previously ignored phenomena such as highly asymmetric interactions in very constrained environments. It also provides a solution for scenes with unnaturally symmetric agent alignments without the need for jittering agent positions or velocities. △ Less

Submitted 1 April, 2022; originally announced April 2022.

Condensation Jacobian with Adaptivity

Authors: Nicholas J. Weidner, Theodore Kim, Shinjiro Sueda

Abstract: We present a new approach that allows large time steps in dynamic simulations. Our approach, ConJac, is based on condensation, a technique for eliminating many degrees of freedom (DOFs) by expressing them in terms of the remaining degrees of freedom. In this work, we choose a subset of nodes to be dynamic nodes, and apply condensation at the velocity level by defining a linear map** from the vel… ▽ More We present a new approach that allows large time steps in dynamic simulations. Our approach, ConJac, is based on condensation, a technique for eliminating many degrees of freedom (DOFs) by expressing them in terms of the remaining degrees of freedom. In this work, we choose a subset of nodes to be dynamic nodes, and apply condensation at the velocity level by defining a linear map** from the velocities of these chosen dynamic DOFs to the velocities of the remaining quasistatic DOFs. We then use this map** to derive reduced equations of motion involving only the dynamic DOFs. We also derive a novel stabilization term that enables us to use complex nonlinear material models. ConJac remains stable at large time steps, exhibits highly dynamic motion, and displays minimal numerical dam**. In marked contrast to subspace approaches, ConJac gives exactly the same configuration as the full space approach once the static state is reached. Furthermore, ConJac can automatically choose which parts of the object are to be simulated dynamically or quasistatically. Finally, ConJac works with a wide range of moderate to stiff materials, supports anisotropy and heterogeneity, handles topology changes, and can be combined with existing solvers including rigid body dynamics. △ Less

Submitted 4 February, 2022; originally announced February 2022.

Differentiable Simulation of Inertial Musculotendons

Authors: Ying Wang, Jasper Verheul, Sang-Hoon Yeo, Nima Khademi Kalantari, Shinjiro Sueda

Abstract: We propose a simple and practical approach for incorporating the effects of muscle inertia, which has been ignored by previous musculoskeletal simulators in both graphics and biomechanics. We approximate the inertia of the muscle by assuming that muscle mass is distributed along the centerline of the muscle. We express the motion of the musculotendons in terms of the motion of the skeletal joints… ▽ More We propose a simple and practical approach for incorporating the effects of muscle inertia, which has been ignored by previous musculoskeletal simulators in both graphics and biomechanics. We approximate the inertia of the muscle by assuming that muscle mass is distributed along the centerline of the muscle. We express the motion of the musculotendons in terms of the motion of the skeletal joints using a chain of Jacobians, so that at the top level, only the reduced degrees of freedom of the skeleton are used to completely drive both bones and musculotendons. Our approach can handle all commonly used musculotendon path types, including those with multiple path points and wrap** surfaces. For muscle paths involving wrap** surfaces, we use neural networks to model the Jacobians, trained using existing wrap** surface libraries, which allows us to effectively handle the Jacobian discontinuities that occur when musculotendon paths collide with wrap** surfaces. We demonstrate support for higher-order time integrators, complex joints, inverse dynamics, Hill-type muscle models, and differentiability. In the limit, as the muscle mass is reduced to zero, our approach gracefully degrades to traditional simulators without support for muscle inertia. Finally, it is possible to mix and match inertial and non-inertial musculotendons, depending on the application. △ Less

Submitted 22 September, 2022; v1 submitted 4 February, 2022; originally announced February 2022.

Journal ref: ACM Transactions on Graphics (SIGGRAPH Asia), 41 (6) 272:1-272:11, 2022

Neural Collision Detection for Deformable Objects

Authors: Ryan S. Zesch, Bethany R. Witemeyer, Ziyan Xiong, David I. W. Levin, Shinjiro Sueda

Abstract: We propose a neural network-based approach for collision detection with deformable objects. Unlike previous approaches based on bounding volume hierarchies, our neural approach does not require an update of the spatial data structure when the object deforms. Our network is trained on the reduced degrees of freedom of the object, so that we can use the same network to query for collisions even when… ▽ More We propose a neural network-based approach for collision detection with deformable objects. Unlike previous approaches based on bounding volume hierarchies, our neural approach does not require an update of the spatial data structure when the object deforms. Our network is trained on the reduced degrees of freedom of the object, so that we can use the same network to query for collisions even when the object deforms. Our approach is simple to use and implement, and it can readily be employed on the GPU. We demonstrate our approach with two concrete examples: a haptics application with a finite element mesh, and cloth simulation with a skinned character. △ Less

Submitted 4 February, 2022; originally announced February 2022.

An End-to-End Differentiable Framework for Contact-Aware Robot Design

Authors: Jie Xu, Tao Chen, Lara Zlokapa, Michael Foshey, Wojciech Matusik, Shinjiro Sueda, Pulkit Agrawal

Abstract: The current dominant paradigm for robotic manipulation involves two separate stages: manipulator design and control. Because the robot's morphology and how it can be controlled are intimately linked, joint optimization of design and control can significantly improve performance. Existing methods for co-optimization are limited and fail to explore a rich space of designs. The primary reason is the… ▽ More The current dominant paradigm for robotic manipulation involves two separate stages: manipulator design and control. Because the robot's morphology and how it can be controlled are intimately linked, joint optimization of design and control can significantly improve performance. Existing methods for co-optimization are limited and fail to explore a rich space of designs. The primary reason is the trade-off between the complexity of designs that is necessary for contact-rich tasks against the practical constraints of manufacturing, optimization, contact handling, etc. We overcome several of these challenges by building an end-to-end differentiable framework for contact-aware robot design. The two key components of this framework are: a novel deformation-based parameterization that allows for the design of articulated rigid robots with arbitrary, complex geometry, and a differentiable rigid body simulator that can handle contact-rich scenarios and computes analytical gradients for a full spectrum of kinematic and dynamic parameters. On multiple manipulation tasks, our framework outperforms existing methods that either only optimize for control or for design using alternate representations or co-optimize using gradient-free methods. △ Less

Submitted 24 August, 2021; v1 submitted 15 July, 2021; originally announced July 2021.

Comments: Robotics: Science and Systems

Solid-Fluid Interaction with Surface-Tension-Dominant Contact

Authors: Liangwang Ruan, **yuan Liu, Bo Zhu, Shinjiro Sueda, Bin Wang, Baoquan Chen

Abstract: We propose a novel three-way coupling method to model the contact interaction between solid and fluid driven by strong surface tension. At the heart of our physical model is a thin liquid membrane that simultaneously couples to both the liquid volume and the rigid objects, facilitating accurate momentum transfer, collision processing, and surface tension calculation. This model is implemented nume… ▽ More We propose a novel three-way coupling method to model the contact interaction between solid and fluid driven by strong surface tension. At the heart of our physical model is a thin liquid membrane that simultaneously couples to both the liquid volume and the rigid objects, facilitating accurate momentum transfer, collision processing, and surface tension calculation. This model is implemented numerically under a hybrid Eulerian-Lagrangian framework where the membrane is modelled as a simplicial mesh and the liquid volume is simulated on a background Cartesian grid. We devise a monolithic solver to solve the interactions among the three systems of liquid, solid, and membrane. We demonstrate the efficacy of our method through an array of rigid-fluid contact simulations dominated by strong surface tension, which enables the faithful modeling of a host of new surface-tension-dominant phenomena including: objects with higher density than water can keep afloat on top of it; 'Cheerios effect' about floating objects that do not normally float attract one another; surface tension weakening effect caused by surface-active constituents. △ Less

Submitted 18 May, 2021; originally announced May 2021.

Journal ref: ACM Trans. Graph., Vol. 40, No. 4, Article 120. Publication date: August 2021

EMU: Efficient Muscle Simulation In Deformation Space

Authors: Vismay Modi, Lawson Fulton, Shinjiro Sueda, Alec Jacobson, David I. W. Levin

Abstract: EMU is an efficient and scalable model to simulate bulk musculoskeletal motion with heterogenous materials. First, EMU requires no model reductions, or geometric coarsening, thereby producing results visually accurate when compared to an FEM simulation. Second, EMU is efficient and scales much better than state-of-the-art FEM with the number of elements in the mesh, and is more easily parallelizab… ▽ More EMU is an efficient and scalable model to simulate bulk musculoskeletal motion with heterogenous materials. First, EMU requires no model reductions, or geometric coarsening, thereby producing results visually accurate when compared to an FEM simulation. Second, EMU is efficient and scales much better than state-of-the-art FEM with the number of elements in the mesh, and is more easily parallelizable. Third, EMU can handle heterogeneously stiff meshes with an arbitrary constitutive model, thus allowing it to simulate soft muscles, stiff tendons and even stiffer bones all within one unified system. These three key characteristics of EMU enable us to efficiently orchestrate muscle activated skeletal movements. We demonstrate the efficacy of our approach via a number of examples with tendons, muscles, bones and joints. △ Less

Submitted 19 November, 2020; v1 submitted 15 June, 2020; originally announced June 2020.